Best external DVD drive?

I used to use the dvd drive in my MBP 15", but I would have clients that tell me the dvd is "skipping over damaged area", or stops playing, etc. I tried slowing down the burn speed to 4X, but that is slow, and it also sometimes gives the same "skipping..." message. I use Verbatim DVD's btw. 
I switched the an LG super drive ($50) and it worked great...for 6 months.
I need a new external drive, and I burn at least 300 dvd's a year.
Any suggestions?
PS...is the Mac Air superdrive the same drive that's in a Macbook Pro or iMac? I would assume so, so probably don't want.

steelers for life wrote:
Would anyone be able to recommend an external enclosure for an internal dvd/cd drives
http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=2010090092+105380712 2
USB, good newegg customer ratings, $122 after rebate, (shipping incl): http://www.newegg.com/Product/Product.aspx?Item=N82E16827199001
USB+FW400, no ratings customer ratings, $166 after MIR, (shipping incl): http://www.newegg.com/Product/Product.aspx?Item=N82E16827199002
...Newegg ROCKS!
Looby

Similar Messages

  • What is the best external dvd drive for my Mac Mini

    I have a new Mac Mini i5 and i would like to know what is the best external dvd writer to get. I would like to burn mo

    The Apple USB superdrive would be a great choice for you, ( http://store.apple.com/ca/product/MD564ZM/A/apple-usb-superdrive?fnode=5f ) I am not certain but I am pretty sure that it has the same form factor as the MacMini (Not thickness but all the other dimenetions) so it fits just under and looks like an extension of your mac. 

  • What's the best external dvd drive (including Mac software) for an iMAC

    Would like to know.

    Assembly of External Drive Solution
    1) Take out the optical drive (DVR-112D-BK) from its box, and slide it into the tray mechanism, and align the black plastic facia (the front of the drive) with the front edge of the case so it's a flush fit, so it looks like it belongs there. There are 4 small phillips head bright, polished screws in the kit...put those aside for now, but you'll use those to fasten down the drive in the tray after everything's buttoned up
    2) Attach the 40-pin/80-wire ATA/100 cable to the drive. It *only goes on one way*, as you'll see a notch at the top that fits into the notch in the back of the drive...you can't install it but one way, the right way. BE CAREFUL to not bend those pins, and get all 40 pins aligned before you push it on. Secure it well, pushing it *all the way in*; it has to be 100% onto the pins.
    3) Attach the power Molex connector to the drive; it also only fits one way. Once again, push it in *all the way* so it "snaps" a little...you'll feel it do that, and then it's secure.
    4) Attach the 4-pin sound board pigtail to the small 4-pin slot, to the LEFT of the ATA/100 connector/cable. It can be fitted either way, but be sure to fit it with the notch on the pigtail toward the left side of the drive
    5) Make sure that everything's hooked up, and do a final alignment of the drive in the tray (it should move in the tray with a little force from your thumbs, easily), again making the front aligned with the front of the case, so it looks OEM nice.
    6) Now use those 4 phillips screws to secure the drive onto the side of the tray. Don't overtighten the screws! Just a snug torque is good.
    7) Take the silver case cover and slide it over the tray, until it's snug with the back of the tray. It should be *perfectly aligned* and fully compressed so there's no gap between the case and the tray...be careful closing the tray on the LED's power wires by the way...just tuck them inside of the tray so when you close it the thing doesn't get in the way.
    Finally) Use those two long black screws to secure the tray and the case aluminum cover through the two holes *in the back of the tray*, and again...*don't overtighten those screws!*...just a snug torque is all that's needed.
    You're done!
    Now hook it up to your Mac via FireWire, and do an Apple System Profiler report and *make sure it's supported* by your System: highlight "Disc Burning" and see if it says "Apple Shipped/Supported" in the right display window, which it will say if you're using 10.4.3 or higher. If you're running Panther 10.3.9 you have to use Patchburn.
    Basically, what PatchBurn does, is generate a new System Profile for the optical drive in question, and it does so for a huge variety of drives, not just Pioneer drives. Once the profile is in your System, simply restart your Mac, and Viola! Instantly your new drive will be available to work with all the iApps, that is iTunes, iMovie, iDVD etc, and it will be integrated with all Finder functions also. That means the drive will then function with Disk Utility's "Burn" commands in all applications, and Disk Utility itself.
    Please don't worry if you try to use your new drive combo and it doesn't work, or isn't recognized by your Mac...just do the above procedure with PatchBurn v3.x for 10.3.x, or v4.x, for 10.4.x, and all will be fine!
    http://www.patchburn.de/download.html

  • Boot Windows AND FreeBSD from my MacBook Pro 8,3 using an external DVD drive. I'm considering to remove my DVD-ROM and replace it with an SSD drive. That doesn't seem to work. Why not?

    As the title says, I'm attempting to boot off my favorite operating systems, Mac OS X, Windows 7 and FreeBSD from an external DVD drive. However, for some odd reasons, booting the Windows DVD and FreeBSD 9.1 install DVD from the external drive does not seem to work. I was able to create a bootable USB with the Windows installer, but whenever I attempt to do the same with FreeBSD, I only get an error message that says "No bootable device -- press any key to restart." Is this a limitation that Apple deliborately created? If so, why won't Apple let its customers do whatever they please with their computers, considering that customers who want to change the hardware and/or operating systems knows what he is doing, without having to worry about some silly Apple limitations?
    If I sound rude, I apologize for that, as no impoliteness is intended from my side.
    In advance, thanks. Have a wonderful day, everyone.

    That is only partially correct at best.
    When you are booting off Windows or any other operating systems that usually don't support EFI (including Windows), your Mac uses something called CSM-BIOS. And as long as that CSM-BIOS implementation on EFI-based Mac do not support booting off from USB (note that Mac OS X Installer works fine when booting from USB), not even a USB Apple SuperDrive which once was an internal drive, there mot definately is something for Apple to fix.
    When attempting to install Windows via BootCamp, a somewhat hybrid GTP/MBR table is created. When you boot off the installer disc of the OS you intend to install (i.e. Windows 7, FreeBSD, etc), your Mac might not support the EFI boot option (at least my 2011 17-inch MacBook Pro doesn't support that), so the only way of booting that second OS installer is via the regular BIOS, which Apple's EFI based systems implement as CSM-BIOS.

  • Can I use USB external DVD Drive to boot up my G4?

    My G4 (PCI Graphics) internal drive DVD-ROM is not working, its dead. I want to replace it with an External USB or Firewire Lacie DVD Drive.
    According to Apple document http://docs.info.apple.com/article.html?artnum=58606, my computer cant boot up from Firewire devices. I think that means, I wont be able reinstall my Mac OS or install future systems or start my DiskWarrior from the CD. Using a external Firewire DVD Drive. Let me know if I am wrong?
    Can I use a USB external DVD Drive to boot up?
    G4 (PCI Graphics) 400 mhz, 488Mb Memory, 50GB, 9.2.2 & 10.3.9. USB 1.0 & Firewire 400 Ports
    G4 (PCI Graphics)   Mac OS X (10.3.9)  

    Hi, Harold -
    Bad news - your G4 (PCI) model can not boot to either a firewire drive nor to a USB drive.
    Although the G4 (PCI) models do have native firewire, they (and their cousins the B&W G3) are specifically exempted from firewire booting; there is no workaround for this -
    Article #58606 - FireWire Booting
    Relatedly, a G4 (PCI) machine can be the Host machine in a Firewire Target Disk Mode setup, but can not be the Target machine.
    Article #58583 - Firewire Target Disk Mode
    USB booting was introduced first on the G4 (AGP) model, and is not available on earlier Mac models -
    Article #58430 - USB Info and Benefits of Dual-Channel USB
    The only external drive your G4 (PCI) can be booted to is a SCSI drive - but that requires that the machine have an appropriate SCSI PCI card installed.
    Replacing the internal optical drive might be the best choice, particularly for ease of maintenance and OS installing in the future.

  • Problem booting from external DVD drive on Lenovo S10e

    Hi,
    I recently purchased a new Lenovo S10e ideapad, a few weeks prior to that I purchased an external DVD rewriter drive manufactured by LG, the drive works perfectly on every computer I try with the exception of the Lenovo ideapad S10e.
    The thing is that the drive is being recognized and installed by the Windows XP Home Edition the S10e came with but when I try to boot a bootable CD using then drive on the S10e ideapad I almost alwasy fail to do so.
    I set the S10e BIOS to have the USB CDROM as first boot device, in addition I used the F12 key to use the boot menu to choose the boot device, in 9 out 0f 10 atempts my external drive will not show in the boot menu and when choosing the enter setup option I see that the BIOS do not list it as the USB CDROM, instead it says "USB CDROM:" rather than have the drive name after it.
    In the 1 time out of 10 it does work the BIOS seem to be identifying the drive and it shows in the boot menu, however I cannot work with it for a more than 1 minute without it stopped being recognized again.
    The problem seems very strange to me as the drive works under the windows operating system and do not have any problem whatsoever on other computers, I have tested the external drive on my PC, another Mini Laptop from LG and a GIGABYTE Laptop (Normal one), all of which had no problems recognizing the external drive and booting from it.
    I will really appreciate if I can get some help with the problem.
    Thanks.

    I've had a similar issue with X61 and the external DVD drive from Lenovo.
    In my case, it was the power issue. On the back of the drive, there is a small table says that the drive needs a 3.0A 5V power input. One USB 2.0 port can only provide 0.5A. I don't know if the drive has any special, low power mode, but I suspect that even if it has, 0.5A is still not enough to fully power it. I've checked the current with the multimeter, and at peak times, the drive draws 550mA. Even then, it makes a stuttering sound for a few seconds, before finally spinning the DVD disk. I've also noticed that the DVD works most of the times when it's connected to the left USB port. That may be because of how the laptop's internal power circuicity is laid out (+separate USB host controller for each 'side' of the laptop). Another thing that seems to help is to disable all 5V driven devices that the laptop uses: the wifi card, bluetooth, any additional devices connected to the USB bus / to the ethernet port / SD card port (I'm not actually sure which of the devices are 5V and which are 3.3V, but the best option is to disable all of them), maybe even remove the battery (if it's charging). Finally, the DVD drive works better if the laptop was turned on and runnig for some time, rather than it being turned on "a minute before". Also, in the BIOS, there is a setting that changes the speed of the DVD drive, but switching it to "low" didn't seem to affect the external drive (at least not before Windows boots up).

  • Imac 2009 external DVD drive

    hi everyone.
    My 2009 Imac DVD drive is damaged and spits out discs (daughter stuck a memory card in it and damaged it apparently). Bought an Apple Superdrive but its not compatible with an Imac with the built in drive!! Can anyone recommend an alternative external DVD drive to buy. Is it best to get one with a Thunderbolt conection, or is USB ok?
    Advice needed please!
    thank

    Here are two on Amazon.com that are cheap and Mac compatible
    http://www.amazon.com/LG-GP10NB20-Portable-External-Drive/dp/B004K2Z4MS/ref=sr_1 _3?ie=UTF8&qid=1398883289&sr=8-3&keywords=Mac+compatible+external+LG+optical+dr i ve
    http://www.amazon.com/LG-Electronics-Portable-External-GP40NB40/dp/B009DS6OFU/re f=sr_1_7?ie=UTF8&qid=1398883289&sr=8-7&keywords=Mac+compatible+external+LG+opti c al+drive
    Here's another source for Mac compatible optical drives. These are better quality optical drives.
    These are also tray loading drives.
    http://eshop.macsales.com/item/OWC/VLU2SD24XS/
    http://eshop.macsales.com/item/OWC/MR3F82SD24S/
    Good Luck!

  • Mini vs. external DVD drive (or hard drive)

    Hi!
    I have a Powerbook G4, was planning to buy an external DVD burner (like a new LaCie with FW400), but now I'm considering getting a Mini instead if I could understand how two Macs can work together, to see if I can somehow have a smarter device for media burning and controlling hardware RAIDs (for storage, not performance). Can one use the Mini as a device for off-loading processing and media burning tasks that one doesn't want taking up time on their main Mac?
    So here are my questions...
    1) When connecting a Mini to a PB, is FW400 the best way to do it? I gather it is from one other posting I've found.
    2) If I connect a Mini to my PB via FW400, can I use Remote Desktop from my PB to control the Mini (analagous to PC Anywhere for PCs)???
    3) If I connect a Mini to my PB via FW400, can I somehow mount the Mini's internal DVD drive on my PowerBook, where the Mini acts as basically an external DVD drive for my PB? Can I do the same with any external hard drives attached to the Mini (see those external hard drives mounted on my PB)? If I do things like that, may I see performance decreases compared to just using external DVD or hard drives?
    Any insight or links for related Mini discussions or web sites would be greatly appreciated!!!

    Could be SL cannot be installed on your model computer, whatever it is.
    Could be the external drive doesn't support Mac OS startup. (Maxtor)
    Startup your Mac normally, and then insert your upgrade disk into the external drive and see what happens.

  • What external dvd drive is compatible with IMAC with optical drive

    what external drive is compatiblee with IMAC with optical driv

    As far as my experience goes I have had all external dvd drives work throu USB, the USB stands for Universal Seriel Bus and that means the drives are already in the device, so you can probably just go to best buy or to new egg and order a cheap one.
    If you have usb 3.0 I would go with that since its one of the faster ones and you will save money on using a thunder bolt device, and trust me a $17 dvd player works just as good as a $120 dvd player.

  • How do I install Tiger on a G3 iMAC from an external DVD drive?

    I want to install Tiger on my PPC G3 iMAC. It is 500MHZ with 512 MB Ram, running 10.3.9. It has a CD drive, but CD version of Tiger is no longer available. I purchased a retail version of Tiger, and, on the advice of the Apple Store personnel, purchased an external DVD drive. It is a USB Lacie drive. My iMAC sees the DVD, but when I click the Install icon, it has a Restart button. Clicking the button restarts for 10.3.9. Same thing happens when I use the "C" key. When I try to assign the DVD drive as the startup drive, it says "ding" and won't assign it. What can I do next?

    Take the DVD drive back and exchange it for a Firewire model. You cannot boot the iMac from a USB drive. This is basic information your Apple store personnel should know unless you failed to tell them what Mac model you have.

  • Using Recovery Media on External DVD Drive

    Now that I know my internal dvd drive is fried, can I use my recovery media utilizing my external dvd drive?
    I have a x205 9800 running Windows 7.
    I put the recovery media in the external dvd drive and it still wants to run it from the internal.
    I have disabled my internal "mat**bleep**a dvd ram uj-850s".  No luck.
    Any help would be deeply appreciated.
    Thanks
    Solved!
    Go to Solution.

    Hi Tamkhai,
    The USB dvd drive is plugged into my laptop.  I am able to get into the boot up area with F12, but it will only allow me to change the order.  I put the USB to the top of the list.  I restart the computer and it brings up the Toshiba Recovery window.  I select OK.  It says "Insert Disc 1."  I insert disc 1 into the external and then it tries to utilize the internal dvd drive.  Even if I disable it or uninstall the dvd drive it still wants to go directly to it.

  • Installing Windows XP on Lion using external DVD drive

    Hi, this is my first time posting on a forum at all, so just keep that in mind when dealing with me.
    I have recently attempted to install Windows XP by partitioning my drive using the disk utility (seeing as Bootcamp no longer supports Windows XP installations). The problems start when I boot from the installation disk; an error "no bootable device - insert boot disk and press any key" occurs. I am inclined to believe that this is due to me using an external DVD drive when doing all of this. I am using an external DVD drive because my internal DVD drive has been spoilt and is no longer useable.
    Does anyone have a solution for me? It seems that it is not possible to install windows using an external DVD drive.

    I am doing this after doing a full wipe of my hard drive and reinstalling lion.
    Previously, I had lion, and made a partition using disk utility and booted from the disk (this time it was from my Mac's SuperDrive which was functioning perfectly at this point in time) and finished the installation completely fine. I then used the drivers that were in my Snow Leopard DVD (I have a Snow Leopard DVD from a previous Mac I purchased).
    The only difference between then and now is that I am using an external DVD drive.

  • How do I run system recovery dvd from an external dvd drive?

    I am having trouble trying to restore my DV 6000 (dv6915nr) from an external dvd drive.  I am aware that this laptop has had several hardware issues, including the loss of use of the internal dvd drive and have tried all the fixes that I could find,including changing filter settings in the registry, changinging the boot order in the bios and even removing the intenal drive.  Since none of these fixes worked, I removed the hard drive and installed window 7 Prodessional in a desktop computer.  After reinstalling drive in laptop, I installed all the Vista drivers from HP.  Computer works fine except for sound card and Nic that failed and have been replaced by USB devices.  Simce I am not 100% sure the hardware failures are motherboard failures and not software, I would really like to run my System Restore DVDs that I purchased from HP.  And that's where I need help.
    I am A Plus and Network Plus certified, so I am pretty sure  that I have tried all the obvious soutions.  Evedrything turned on, checked the cables, accessed dvd in wimdows and even ran restore disk in a desktop machine to the point that it told me I was trying to restore the wong computer.  I downloaded a program called Win To Flash that allows you to copy a setup disk to an external hard drive, but that didn't work.  HP restore disk does not have  Setup file on it, so it wouldn't copy to drive.  Tried just copying the disk to external and that didn't work either.  Also tried switching drive letters D and E without any success. 
    Bios choices are:
    USb floppy
    ATAPI cd/dvd rom drive
    USB diskette on key
    Notebook Hard drive
    Network Adapter
    Original restore partition is long gone.
    I would rather restore it with an external Hard drive, not an USB memory stick.  I think both would work the same.  I do have an USB floppy drive, if there is some way of starting installation from floppies.
    Like I said, I really like the computer, even with all its faults, but I would like to restore it to its original  Operating System.

    Some progress, I got it to try to boot from an external hard drive.  Downloaded a program called WINToboot. tried to run it, got as far as formatting my  hard drive and might have loaded some kind of boot program.  Would not copy my restore disks because they did not have set up program.  Copied both restore disks to hard drive and tried to boot laptop.  F0 produced choose external hard drive choice.  Got "no OS found" error. only choice ctl alt del. I think I am headed in right direction.  Just need to know what to load on external hard drive. 

  • How do I install an amazon external dvd drive to replace a broken internal one in my old macbook?

    My old macbook has a broken optical drive inside it. The one that came with it has quit working and the genius at the genius bar said it needed to be replaced. The genius said to get an external one online so I bought the Amazon basics external dvd drive. I can't figure out how to install it and get it to work.

    Nothing will show up on the desktop until you put a CD/DVD in it.
    Plug it into the FireWire or USB port and turn it on. Put a CD/DVD in it and it should show up on the desktop.

  • Internal DVD drive is shot. Can I install SL from an external DVD drive?

    Hi folks, a quick (well actually a few) questions.
    I've had my imac since early '06. It's currently running Tiger, and I'd like to install Snow Leopard. The problem is that the internal DVD drive is shot. It's been occasionally refusing to accept DVDs for a while now, and now it has a DVD stuck in it (not mounted), which I can't get out via terminal, rebooting, or jiggling it (technical term I know).
    Now, I'm going to assume that getting apple to replace the DVD drive will be more expensive than just grabbing an external drive, especially as I'll most probably only use it once. The question is, if I grab a cheap external DVD drive, will I be able to install Snow Leopard with it? Or will Tiger not recognise it as a boot drive?
    Many thanks,
    Chris
    p.s. Also, I'm using a cheapo windows style keyboard (will be replacing asap), and I'm wondering if this is why I can't see bootable drives when holing option on startup?

    Yes, you can install from an external drive, although I wouldn’t go for a cheap one. There are good, relatively inexpensive, drives out there. And you are going to need that option key to select the install disk as your startup. I believe there is a corresponding key on a PC keyboard, but I don’t know what it is (maybe Alt?). I’m sure someone can jump in here and tell us.

Maybe you are looking for