Best Jsp book with practical approach

hi
I am new to JSP.
I wish to learn JSP with more of practical approach.
I have already gone through "Head First JSP and servlets"...but it is more dedicated towards SCWCD...
so this time i wish to take sugessions before picking up a book...
I need a book with is much more of practical approach...
covers traps in JSP....
thanks.

kmangold wrote:
Core Servlets & JavaServer Pages is the book I used when I was learning. It helped me get started real easily.I thought Marty Hall's books were OK, but I think Hans Bergsten's JSP book from O'Reilly is the hands down winner. It starts with JSTL right off the bat. You only learn scriptlet coding in a later chapter, almost as a last resort. I think that's the right way to learn JSPs.
%

Similar Messages

Best Practical JSP Book for PHP developer

Hi Friends,
I am new to JSP and want learn basics of JSP so that I can do simple web page works.
I am a PHP developer with one and half years of experience.
Can anybody tell me what is the best JSP book for beginners or any web link with lots of simple jsp example?
--Sujoy

Before you learn JSP, you need to learn Java. I heard 'Head First in Java' is a good book. Install Eclipse IDE (its free) and work through some of the book's examples in it (as you read the book from cover to cover). Then Install Tomcat (its free) and the tomcat plugin for Eclipse (its free). Then read a book on JSP (cover to cover). I like the book 'JSP in action'. It covers both JSP and servlets. Then, create a hello world JSP in Eclipse, then a hello world servlet in Eclipse.

Best practice approach for seperating Database and SAP servers

Hi,
I am looking for a best practice approach/strategy for setting up a distributed SAP landscape i.e separating the database and sap servers. If anyone has some strategies to share.
Thanks very much

I can imagine the most easiest way:
Install a dialog instance on a new server and make sure it can connect nicely to the database. Then shut down the CI on the database server, copy the profiles (and adapt them) and start your CI on the new server. If that doesn't work at the first time you can always restart the CI on the database server again.
Markus

Mac book air or pro best for using with projector?

mac book air or pro best for using with projector?

My preference is the Pro because there are more port options with the MBP.

MDS Best Practice Approach - Sample HR Scenario

Thanks for taking to time to read my MDS requirement...just looking for a better way to go about it.
Here is the requirement:
Every month CEO releases an excel list of approved employment positions that can be filled to the HR. The HR dept wants to be able to add positions that CEO approves and remove positions that the CEO feels are
no longer necessary. The recruiting group wants to track/modify this master list of positions per the CEOs discretion and assign employees to potentially each position as people are hired/terminated.
The HR data steward must be able to:
-when a position is filled, must be enabled to assign employees to the positions for org chart reporting
-they need the ability to assign/reassign parent child relationships for any position i.e. the Director Position manages multiple Manager positions which manage multiple Register Clerk positions.
I am new to MDS and am initially not sure how to approach this problem...do I create one entity for 'Positions' and another for 'employees' ? I'm thinking with that approach I can create employee as an domain based attribute for Position, then
create a derived Hierarchy for the Position parent/child relationships...just wondering if this is a good approach.
Are there other things I should be taking into consideration? Thanks!

If your Material list document is not excessively long it probably wouldn't be too much overhead to add a few extra columns using the CalculatedColumn action block. These extra columns, even though the number would be the same for all rows could contain a column for each of your aggregated functions.
Then in your iGrid just set the Column Width for these addtional fields to zero and upon UpdateEvent of the grid you could javascript them from Row number 1 to your desired html elements, etc.

Key figure display in planning book with respect to Time bucket profile

Hi,
I am loading a key figure to planning area from the info cube for the current month. When I review the key figure in planning book with monthly time bucket profile it shows 85 for the current month. In the same planning book with weekly bucket profile, it shows 55 from the current week and future weeks and the remaining 30 goes into the past weeks of the current month.
How to make the total quantity 85 to show in the current and future weeks only.
thanks and regards
Murugesan

Hi Murugesan,
Within the Planning Area, the data is stored at the lowest level granularity that you maintain in storage bucket profile. Then during display, system will decide what data to show depending on what kind of time bucket profile you use in the planning view, and the time based disaggregation that you maintain for Key Figure.
In this below case, what time characteristic do you have in cube? Is it date, week or month?
If it's date, check how much KF data is maintained on the dates which belong to week which has days both in this month/last month e.g. if I talk about Dec 2011, how much data is stored 1,2,3 & 4 th of Dec, 2011.
This data would appear in Dec in monthly view, but in week, it would appear in the week starting 28th November.
If data is maintained in cube in weeks, then you need to calculate how time based disaggregation would show it to you in months.
If it's months, then you would need to find out how much data would go to the days in the past week of the month.
The time based disaggregation may be causing you some issues, but in that case, I would not expect 30 out of 85 to go in the past week, unless you have data in cube in days.
Data shown in weekly view for week starting 28th Nov should ideally be a small proportion of 85, unless you are using a time stream/fiscal year variant, due to which most of December is in holidays. The only other exception I can think of is that you have data in teh days mentioned above.
It would be best to help the business understand this disaggregation logic, rather than thinking of manipulating the data to shift to a later week.
If this logic doesn't explain your situation, then please provide the date/week/month at which you have data in cube, and what quantity.
Thanks - Pawan

In need of a jsp book :)

I'm planning on converting a asp website to jsp and I need to figure out the following:
1: servlet that gives out connection objects from a pool and manages "lost" connections to a mysql db
2: a bean that has getConnection and closeConnection that is used on every jsp page.
3: servlet/bean that can check size/dimesions/filetype on a remote url image
4: Figure out what users are logged in at every given moment. result: x users are on, these are user1, user2, user3. automatic removal when session runs out. probably need a servlet for this.
Its been 3 years since I've touched java so i hope you guys can recomend a jsp book that can answer these questions for me and help me get started with this project?
Thanks :)

Yeah youre right, I should have specified that.
I got these books:
deitel java how to program 3rd edition
deitel advanced java 2 platform how to program
the last ook has a servlet and jsp section ut I suspect that java has evolved since then so thats why I'm asking if you have any other suggestions that offer more than 2 chapters. Its really basic the stuff i have :)

My air book with 10.8.4 got warm when the powersuppley is on

My air book with 10.8.4 got warm when the powersuppley is on

It is normal for a computer to get "warm" when CPU / GPU intensive actvities are run.
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, you may have to take the computer and the power adapter
to the Apple store to have it checked out.
Best.

Replacing all text in book with sample text

Hello fellows,
Is there a way to replace all the textual content in a book with some sample text using Extendscript?
If yes, could you please point me to the relevant APIs?
Thank you for your help in advance!

Yes, the point that Rick was making crossed my mind, too. Using regular expressions, you can easily specify which characters should be replaced. Listing a number of same-width characters and replacing them with an "x" is as easy as this:
sTextString.replace ( /[abcdefghknopqrsuvyz]/g, "x" );
This would leave the non-mentioned characters as they are. Depending a little bit on the fonts that are used, of course, as they might have different character widths for more than the ones I left out. But even if you only replace a couple of characters throughout the doc, it would be enough to get the desired effect.
The difficulty is getting to the text strings and also to replace them. There are many objects for which a GetText method exists, but you have to set the flags such that you actually get the right text strings out of that method. And then you have to figure out where in the doc the text string is, then delete the existing one and add the replacement. All of this has to be done without deleting any markers or anchors.
Another approach might be to set the text location to the first character in the main flow and then walking through the entire document character by character, testing each one and replacing it where required. But I don't think you would get into tables with that method, as those are linked to the running text via an anchor in that running text. So the table cells will have to be processed separately. And if you do have a method to change text in table cells, you can use that method on all paragraphs.
I think Rick has more experience in tweaking text strings. I am usually working on structured documents and only handling the element objects and their hierarchy, not so much changing the text content of documents. Rick, do you have an approach to walk through all text strings in a document and replace them without breaking anything ?
Ciao
Jang

Link in Webhelp to open sub-TOC tree of a 'Book with Link'

RH8 HTML
Hi all, hoping I can find a solution for this.
Currently, and as it should, I link to a page in my webhelp, from within my webhelp. i.e front page has a link that refers to another section in the webhelp. The links work fine, these links however are going to the 'book' (I created the TOC books to be books with links) and within these books are other topics.#
Is there a way to make it so that when the user clicks a link that goes to one of these 'books' in the TOC, that the toc tree also drops down.
example (hard to explain)
TOC
Home (contains link that user clicks which goes to Page 1)
Page 1 (book with link)
sub-page1 (remains closed until user opens it by clicking 'Page 1' book)
subpage 2 (remains closed until user opens it by clicking 'Page 1' book)
I would like those sub-pages to be opened when the link is clicked. Can it be done?
Thanks, hope its clear....

Hi all
For what it's worth, Leon's suggestion is what I too would recommend. When I facilitate a RoboHelp class and am discussing the "Book with link" feature, I typically will suggest that this approach is used.
@Leon - I think this changed with a recent forum upgrade. Annoying, isn't it?
Standard definiton of any upgrade: Uninstall old bugs. Install new ones.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Wrong PC in MIGO how to reverse and book with the right PC

Hello Experts
Objective:
My controller wanted to reverse the Entries From Profit Center A to Book it with Profit Center B, since they use the Profit Center B.
My detailed Analysis:
PC = A
PC = B
Internal Order was created = A123 > and had PC = A assigned to it.
Production Order was created for Material No = M123 with respect to Internal order = A123 > and has PC = A assigned to it, since Material Master = M123 has PC = A in the costing view.
When i check the entries it was all MIGO i saw something strange that these MIGO entries were booked with different materials other than the Material assigned in the production order.
Any ways even if MIGO would have book with the same Material master but since there is PC = A in the Internal Order and Production order it will default the PC A in the accounting entries.
so if we analyze the above scenario, there should be a PC = B assigned in the IO A123 and Production Order A123, then it would work.
so what would be the solution to achieve my objective, in the above case.
Best Regards

Hi,
It can be quite frustrating to program using the DAQmxBase driver. Beaware, that this is just a temporary driver. The next release of the DAQmx driver will include the usb-600x series.
When this is said, you should be able to use the driver. To make sure that the device is working use one of the examples found by pressing the windows start button > Programs > National Instruments > DAQmxBase > Examples > LabVIEW.
The examples will give you a good starting point.
Also I would make sure that I had the newest version of the driver installed. Following link will provide that for you:
http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C128D?opendocument&node=132060_US
Let me know if this doesnt solve your problem.
Regards
Anders M
NI DK

Suggest a good JSP book

Can anyone suggest a Good JSP book for a intermediate level Programmer.
It should have good working examples of JSP model 2 architeture and also on how to use Tags in JSP
Rajani

Web Development with JavaServer Pages by Duane K. Fields and Mark A. Kolb
See http://www.manning.com/Fields/index.html

Printing Photo Book with 101+ Pages

Sorry if this has been previously posted, but I could not find anything on this topic. Does anyone know of an online service that will print a photo book with more than 100 pages? I have a photo book I have created in PS6 to commemorate my parents trip to Europe for their 50th anniversary. All that time and effort and then I find out Kodak will only print up to 80 pages! I would really appreciate any suggestions on this!
Thanks

Thanks Trish. My book is actually 140 pages & viovio only goes to 120. At this point, guess I will look at deleting 20 pages (tough!) and using them. They seem to be the best option so far!

Problems running jsp files with tags on tomcat 4.0

hi,
i had some jsp1.1 stuff running on tomcat3.3.
last week i moved to tomcat 4.0 , changed the tags to fit jsp1.2 and... everything is wrong now. while trying to run jsp with tags i get an error message (same for all files):
---->
description The server encountered an internal error (Internal Server Error) that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: (class: org/apache/jsp/djsp$jsp, method: _jspService signature: (Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse; )V) Incompatible object argument for function call
<-------
the jsp files with no tags and servlets are running ok.
I NEED YOUR HELP!!!

cyclid,
i have the same environment setup and the same troubles. after searching the forums, it seems that there are others with the same, if not similar issues, yet no solutions. if you find the solution to this one, could you please post it. i would really appreciate it since i have been on this one for several days with no success. i even tried the helloworld jsp/custom tag examples from a jsp profession book that i have and that won't work.
Anyone out there,
if you have any idea why this problem exists, any solutions, ideas would be appreciated.
thank you,
navesink

HT5557 Can you make a book with Pages app. to transfer to iBook on the iPad?

I have a very old manual of Westinghouse Radio schematics (1936-1937).I have scanned the manual in pdf's and wanted to take certain models to put together as one "book" for my own reference. iBook sees each page as a book when I export to it.
What would be the best way to put them together so iBook sees one book with pages inside?

I understand.
I would like to keep the phone as secure as possible from unauthorized use by keeping it locked and disabling siri on the lock screen.
However I would like my children to be able to use the phone app to call mom. Seems like this could be accomplished by permitting the owner to imput several numbers that can be called from the locked screen. Another solution would be to limit Siri's access when the phone is locked.

Best Jsp book with practical approach

Similar Messages

Maybe you are looking for