Best method for keyframing with 3d camera 1 shot....

Hi I have a project I am working on and basically I am finding the key framing a little frustrating because I cant get the camera to do what I want. Ususally I have no problem in FCP but with Motion it doesnt seem as easy. Bascially what I have done is put up 7 of the same clip all in 3d spread down. What I want the camera to do is zoom close to one. Pause while you read what is on the clip then pan and zoom to the next one. The method I am doing is I hit the record button. Start the zoom to the first object then move timeline to where I want the camera to stop the zoom. I hit the record button again..wait a few frames and then hit it again so I can zoom to the next object. What seems to hahppen is the camera just starts moving to the other object and wont pause for those frames. I would like to know the best method for making this possible.Thanks

hi,
edit them all! Just select them all and choose linear from the control pop up.
if that doesnt work, maybe you could try setting keyframes manually, like you would in FCP. You dont turn on the red button at all, but add keframes for the parameters you want to animate in the Inspector window.
Sometimes I find I have to add two keyframes a frame apart to give that definite stop. This also allows me to play with the timing of the pauses. So set a keyframe where the camera starts to move and one where it stops. Then a frame on set another keyframe without changing the values, then go to the next point you want the camera to move and set another keyframe.... and so on.
hth
adam

Similar Messages

Best method for networking with ubuntu linux

Hi,
I'm setting up an ubuntu linux fileserver, and I was wondering what the best method for filesharing with my mac is. I'm currently running osx 10.4.11, though I may be upgrading to 10.5 soon. I'll be running SMB networking for a couple of other computers, but I'd prefer something a bit more robust that can handle file permissions etc.

Mac OS X supports NSF out of the box. Configuration isn't documented.
I recall Apple got rid of net info manager in Leopard, so the configuration will be different. Perhaps more unix like.
Mac OS X support the Unix Network File System (NFS). However, it leaves out
the GUI.
This page show you how to use NetInfo Manager:
http://mactechnotes.blogspot.com/2005/09/mac-os-x-as-nfs-server.html#c1168221713 40271068
NFS Manager can both setup NFS shares and connect to NFS shares.
http://www.bresink.com/osx/NFSManager.html
Once you figure out how NFS Manager configures the NFS shares, you can
use Applications > Utilities > NetInfo Manager to create more shares.
You will either have to coordinate Unix Userid number and Unix Group Id number or use the mapall option on the share.
To find out your Mac OS X userid and group id do:
applications > utilities > terminal
ls -ln
ls -l
# lists the NFS share on your mac
showmount -e localhost
#list NFS shares on a remote host
showmount -e remote-ip-address
Once you see what NFS Manager does, you will be able to use NetInfo Manager to manage a connection. In Mac OS 10.4 you can configure the /etc/exports control file. See man exports for the details. Before that you had to have the data in NetInfo manager. When Mac OS X came out, many common Unix control files were not present. Instead the data had to be in NetInfo manager. Over time Apple has added more and more standard Unix control files.
======
You do know about the need to match userids & groupids.
# display uid and gid
ls -ln
sudo find / -user short-user-name -exec ls '-l' {} \;
# on Mac OS X
you will need to go into NetInfo Manager and select user and find your short-user-name. Change uid and guid.
#on Linux look in
/etc/passwd
/etc/group
# with care...
# change 1000:20 to your values for uid:gid
sudo find / -user short-user-name -exec chown 1000:20 {} \;
The manual for Tenon MachTen UNIX (which Apple checked when doing Mac OS
X) says that one should crate the file /etc/exports, which will cause
portmap, mountd and nsfd to launch at startup via the /etc/rc file. The
file must not contain any blank lines or comments, and each line has the
syntax
directory -option[, option] hostlist
where 'directory is the pathname of the directory that can be exported,
and 'hostlist' is a space separated list of hostnames that can access the
directory. For example
/usr -ro foo bar
/etc
/Applications
/User/gladys gladys
The client the uses a command like
/sbin/mount -t type [-rw] -o [options] server:directory mount_point
where 'type' is 'nfs', 'server' the name of the server, 'directory' the
server directory mounted, and 'mount_point' the client mount point. See
'man mount' for details.
I haven't tried the above, but it would be nice to know if it works on Mac OS X.
Hans Aberg
This will give you some hints on NFS. Post back your questions.
Robert

Best methods for importing artwork via Illustrator with tranparency?

I'm new to Final Cut Pro and am tryin to figure out the best methods for importing artwork via Illustrator. So far, I've been saving the artwork as a transparent PNG, but I feel like there should be a better way. Any help would be greatly appreciated.
Thanks,
Mike
MacBook Pro Mac OS X (10.4.8)

Hi:
Ussually I have to rebuild in AI the company logo (I use to work for industries) to include in FCP edit.
- If you have CS2, open Photoshop and create a new file using the right preset (i.e. DV PAL) using transparent background. That creates a PSD empty file with all attributes you need (pixels dimensions and aspect ratio) to use later in FCP.
- Select your work (i.e. the final logo) in the AI canvas and copy it.
- Paste it in the empty PSD file as "vextor information" (I don't remember right now the exact words!). That way you can resize it in the PSD file without loosing quality.
- The better ir deciding the size NOW in Photoshop, or create sveral version in different sizes. Yuo'll get better quality id you make the resizings in Photoshop rather that doing a scale in FCP timeline.
- Once your logo is in the right dimension into the PSD file, save a copy and flatten all layers keeping the transparent background. If you don't need the layers during editing in FCP, you better have all layers flattened.
- Import that file in FCP.
That's my workflow, but probably you'll find different flavors here!
Alberto

What's the best method for a nav menu with image rollover for all visitors?

Hi.
First, thanks for reading this.
What's the best method for a nav menu with image rollovers for all visitors, including PDAs? I've used JavaScript rollovers for years because the majority of my customers' visitors use some version of IE (past 7.0) but I'm building a new site that has to display properly for the widest range of visitors imaginable. (I also know that I need to use a more modern method for everyone and this is my excuse to start).
Finally, using images is critical. I apologize ahead of time to anyone I offend, but I have never seen a nav menu without images that doesn't look just plain terrible.
Thanks.
Fitz21

If you want the best menus possible for Dreamweaver look no further than Project Seven:
http://projectseven.com/
They have all kinds of menus and other extensions available for purchase. Easy to use and they work as advertised. I personally use Pop Menu Magic and Tab Panel magic myself. I could go on and on, but I guarantee that if others respond they will echo the same sentiment for Project Seven.

HT1229 what is the best method for using a iphoto with an external hard drive for greater capacity?

what is the best method for using a iphoto with an external hard drive for greater capacity?

Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

Best practice for dealing with Recordsets

Hi all,
I'm wondering what is best practice for dealing with data retrieved via JDBC as Recordsets without involving third part products such as Hibernate etc. I've been told to NOT use RecordSets throughout in my applications since they are taking up resources and are expensive. I'm wondering which collection type is best to convert RecordSets into. The apps I'm building are webbased using JSPs as presentation layer, beans and servlets.
Many thanks
Erik

There is no requirement that DAO's have a direct mapping to Database Tables. One of the advantages of the DAO pattern is that the business layer isn't directly aware of the persistence layer. If the joined data is used in the business code as if it were an unnormalized table, then you might want to provide a DAO for the joined data. If the joined data provides a subsiduray object within some particular object, you might add the access method to the DAO for the outer object.
eg:
In a user permissioning system where:
1 user has many userRoles
1 role has many userRoles
1 role has many rolePermissions
1 permission has many rolePermissions
ie. there is a many to many relationship between users and roles, and between roles and permissions.
The administrator needs to be able to add and delete permissions for roles and roles for users, so the crud for the rolePermissions table is probably most useful in the RoleDAO, and the crud for the userRoles table in the UserDAO. DOA's also can call each other.
During operation the system needs to be able to get all permissions for a user at login, so the UserDAO should provide a readPermissions method that does a rather complex join across the user, userRole, rolePermission and permission tables..
Note that f the system I just described were done with LDAP, a Hierarchical database or an Object database, the userRoles and rolePermissions tables wouldn't even exist, these are RDBMS artifacts since relational databases don't understand many to many relationships. This is good reason to avoid providing DAO's that give access to those tables.

What is the best method for backing up photos in IPhoto?

I have over 10,000 photos in IPhoto and am looking for the best method for doing a backup (or an archive?). I'm now using ICloud and it appears it's just photo streaming and does not have storage capability. External hard drive, copying to a DVD, other suggestions?

Most Simple Back Up
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex:
Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically. Examples of such apps: Chronosync or DejaVu . But are many others. Search on MacUpdate
My Routine
My Library lives on my iMac. It’s Backed up to two external hard disks every day. These disks are permanently attached to the iMac. These back ups run automatically. One is done by Time Machine, one is a bootable back up done by SuperDuper
It’s also backed up to a portable hard disk when ever new photos are added. This hard disk lives in my car. For security, this disk is password protected.
I have a second off-site back up at a relative’s house across town. That’s updated every 3 or 4 months.
My Photos are backed up online. There are many options: Flickr, Picasa, SmugMug etc. However, check the terms of your account carefully. While most sites have free uploading, you will often find that these uploads are limited in terms of the file size or the bandwidth you can use per month. For access that allows you to upload full size pics with no restrictions you may need to pay.
Every couple of months I test the back ups to make sure they are working correctly. It’s very easy to mis-configure a back up application, and the only way to protect against that is to do a trial restore.

When bouncing- what's best method for smallest file size/highest quality?

I am in the process of embedding 3 mp3's into a PDF to submit as a portfolio. The PDF also has text, and two scores included, and with the 3 embedded mp3's it can't be more than 10mb.
So my question is: When bouncing a project out of Logic, what is the best method for getting the smallest file size, but retaining the best audio quality? And once it's out of Logic and it is an mp3 or other type of audio file, is there a best format for compressing it further, and still maintaining the relative quality?
I bounced out the three projects into wav's. Now I am using Switch for Mac to compress them down to smaller Mp3's. I basically need them to be about 3 mb each. Two of the recordings sound OK at that size, but they are just MIDI(one project is piano and string quartet, the other is just piano- all software instruments. The recording that combines MIDI and Audio and has more tracks (three audio tracks and 10 Midi/software instrument tracks)and sounds completely horrible if I get it under 5 mb as an mp3. The problem is that I need all three to equal around 9mb, but still sound good enough to submit as a portfolio for consideration into a Master's program.
If anyone can help I would really appreciate it. Please be detailed in your response, because I am new to logic and I really need the step by step.
Thank you...

MUYconfundido wrote:
I am in the process of embedding 3 mp3's into a PDF to submit as a portfolio. The PDF also has text, and two scores included, and with the 3 embedded mp3's it can't be more than 10mb.
So my question is: When bouncing a project out of Logic, what is the best method for getting the smallest file size, but retaining the best audio quality?
The highest bitrate that falls within your limits. You'll have to calculate how big your MP3's can be, then choose the bitrate that keeps the size within your limit. The formula is simple: bitrate is the number of kilobits per second, so a 46 second stereo file at 96 kbps would be 96 x 46 = 4416 kbits / 8* = 552 kBytes or 0.552 MB. (*8 bits = 1 Byte)
So if you know the length of your tracks you can calculate what bitrate you need to keep it within 10 MB total.
I consider 128 kbps the lowest bearable bitrate for popsongs and other modern drumkit based music. Deterioration of sound quality is often directly related to the quality of the initial mix and the type of instruments used in it. Piano(-like) tones tend to sound watery pretty quickly at lower bitrates, as do crash and ride cymbals. But don't take my word for it, try it out.
And once it's out of Logic and it is an mp3 or other type of audio file, is there a best format for compressing it further, and still maintaining the relative quality?
You can only ZIP the whole thing after that, but that is just for transport. You'll have to unzip it again to use it. And no, you cannot compress an MP3 any further and still play it.
I bounced out the three projects into wav's. Now I am using Switch for Mac to compress them down to smaller Mp3's.
That is silly, you could have done that in Logic, which has one of the best MP3 encoders built in. And how good encoders are will especially come out at bitrates around or below 128, which you might be looking at.
I basically need them to be about 3 mb each.
So, one more scrap of info we need here: how long are those three pieces, exactly? I'll calculate the bitrate for you - but please bounce 'm directly out of Logic as MP3's. They will very probably sound better than your WAV-conversions made with Switch.
!http://farm5.static.flickr.com/4084/4996323899_071398b89a.jpg!
Two of the recordings sound OK at that size, but they are just MIDI(one project is piano and string quartet, the other is just piano- all software instruments. The recording that combines MIDI and Audio and has more tracks (three audio tracks and 10 Midi/software instrument tracks)and sounds completely horrible if I get it under 5 mb as an mp3. The problem is that I need all three to equal around 9mb, but still sound good enough to submit as a portfolio for consideration into a Master's program.
Length of the piece? And does the .Wav bounce you have sound OK?

Best setup for iMac with SSD & HDD? Best location of scratch & home folders

Best setup for iMac with SSD and HDD? Best location of scratch & home folders?
Computer:
iMac 2.93 GHz Quad core i7, 8GB RAM, 1 TB HDD + 256 GB SSD
There is not much info from Apple about the best way to set up an iMac with a Hard Drive and Solid state drive. I’ve looked at a few of the forum posts across the web and came up with a plan and lots of questions. (I do use photoshop frequently, but not on a professional level):
1. I will keep OS and Applications on SSD
2. About moving the home folder: I saw some posts about moving the whole home folder, but it makes more sense to me to only move selected fodlers withing the home folder tomake the best use of the SSD. So will keep the home folder on SSD, but move certain folders (document /music/iphoto/download) to 1 TB HDD via instructions I found on the macintoshperformanceguide website:
cd
sudo cp -r Documents /Volumes/Master
sudo rm -rf Documents
sudo ln -s /Volumes/Master/Documents Documents
3. I would like to get 8 more RAM when I can afford it
4. I will attach an external hard drive for most of my documents and backup storage
5. Now here is where I’m not sure what’s best:
a. Should I partition my internal 1 TB hard drive and use the first partition as a scratch disc for photoshop and other applications? How much should I partition? Is there any benefit to this if the rive is partitioned?
b. Should I use an external drive as a scratch disc?
c. Any advice on a good 1-2 TB external drive?
d. Should I just leave things in factory settings?
Don't assume I know the basics - I got all the above just by searching around. Any advice and commentary is appreciatedThanks.
Message was edited by: sfandtheworld

Thanks for the advice and the links. yes, I would like to speed up ps as much as possible.
I wonder if putting the scratch disc on the same drive as the OS would cause them to interfere with each other? Even if they are on different partitions, they would not be able to be accessed at the same time, or could they? That's why I was wondering if I should place scratch disc on the internal HDD -- but then I don't know how much to partition for it (or to partition at all?)
ALso, I read on a few places that too much read/write on the SSD wears it down over time? Is this more of a theoretical concerns - it does not make sense to me since it has no moving parts!
thanks again for the advice ... I'm gonna go digest those links

What's best strategy for dealing with 40+ hours of footage

We have been editing a documentary with 45+ hours of footage and presently have captured roughly 230 gb. Needless to say it's a lot of files. What's the best strategy for dealing with so much captured footage? It's almost impossible to remember it all and labeling it while logging it seems inadequate as it difficult to actually read comments in dozens and dozens of folders.
Just looking for suggestions on how to deal with this problem for this and future projects.
G5 Dual Core 2.3 Mac OS X (10.4.6) 2.5 g ram, 2 internal sata 2 250gb

Ditto, ditto, ditto on all of the previous posts. I've done four long form documentaries.
First I listen to all the the sound bytes and digitize only the ones that I think I will need. I will take in much more than I use, but I like to transcribe bytes from the non-linear timeline. It's easier for me.
I had so many interviews in the last doc that I gave each interviewee a bin. You must decide how you want to organize the sound bytes. Do you want a bin for each interviewee or do you want to do it by subject. That will depend on you documentary and subject matter.
I then have b-roll bins. Sometime I base them on location and sometimes I base them on subject matter. This last time I based them on location because I would have a good idea of what was in each bin by remembering where and when it was shot.
Perhaps, you weren't at the shoot and do not have this advantage. It's crucial that you organize you b-roll bins in a way that makes sense to you.
I then have music bins and bins for my voice over.
Many folks recommend that you work in small sequences and nest. This is a good idea for long form stuff. That way you don't get lost in the timeline.
I also make a "used" bin. Once I've used a shot I pull it out of the bin and put it "away" That keeps me from repeatedly looking at footage that I've already used.
The previous posts are right. If you've digitized 45 hours of footage you've put in too much. It's time to start deleting some media. Remember that when you hit the edit suite, you should be one the downhill slide. You should have a script and a clear idea of where you're going.
I don't have enough fingers to count the number of times that I've had producers walk into my edit suite with a bunch of raw tape and tell me that that "want to make something cool." They generally have no idea where they're going and end up wondering why the process is so hard.
Refine your story and base your clip selections on that story.
Good luck
Dual 2 GHz Power Mac G5 Mac OS X (10.4.8)

Best method for flv playback in flash 8

group,
i am currently trying to get to grips with flv playback with
flash 8. i have come across a number of methods for flv playback
within flash 8 and am curious to know the difference between
methods and ultimately if there is such a difference discover which
is best. I have had a few issues with some methods and was
wondering if it was because that method sucks.
In particular i am looking for the best method for allowing
custom skinning of the player with the ability to have a player
somewhere on stage without it being stapled to the darn flv file.
METHOD1:
var nc:NetConnection = new NetConnection();
nc.connect(null);
var ns:NetStream = new NetStream(nc);
theVideo.attachVideo(ns);
ns.play("testmovie.flv");
METHOD2:
import mx.video.*;
this.attachMovie("FLVPlayback", "my_FLVPlybk", 10,
{_width:360,_height:240,x:0, y:0});
my_FLVPlybk.skin = "SteelExternalAll.swf"
my_FLVPlybk.contentPath = "testmovie.flv";
my_FLVPlybk.autoSize=true;
my_FLVPlybk.autoPlay=false;
what are the differences??
any help would be much appreciated. Thanks for your time and
expertises,
Flash fan.

Adobe has announced that it has ceased development of Flash for mobile phones (in favour of HTML5, and due to the opposition of both Apple and Microsoft to allow support of Flash for their mobile operating systems), so from that direction neither Microsoft nor Nokia is going to get any help.
If the Adobe Flash Video format specification is publicly available to use or to license (I don't know if it is), then at least Microsoft could implement support for it, if they wanted to (Nokia might not have sufficient rights from Microsoft to add new codecs to Windows Phone).
So, you might direct your question primarily to Microsoft, rather than Nokia (of course, a Microsoft representative will probably read this, too, but whether they'll response or not is another matter).

Best method for incremental replication to backup xserve?

I was just trying to figure out what would be the best method for routinely incrementally replicating a primary xserve. I have a secondary that has the same hardware. I thought about using scheduled tasks with Carbon Copy Cloner over say a Crossover cable to the secondary xserve. However, doing this backup would continually wipe out the network settings for the secondary mac? I could do the replication to a secondary drive and then just make that drive the boot drive in the event of data corruption on the master server?
Where I'm at now is that the primary server runs Raid1, so in the event of a single drive failure or a hardware failure, I could swap the drives into the backup server. However, I'd like some sort of protection against data corruption on the primary xserve.
Any general thoughts on a better way to do this? Or is there software that does this well?
Thanks

Our primary is an XServe RAID. In addition it has an external 2TB drive that I CCC all the user accounts to every night. I then setup a Mac Mini Server as a replica.
If the primary XServe has a catastrophic failure, I simply connect the 2TB drive to the Mac Mini and point the replicated user accounts to the cloned data on the 2TB drive.
I haven't tested it. But this scenario seemed like the best solution.
Message was edited by: MacTech_09

Best method for refreshing a component's data?

What's better when you want to refresh the content of an object? Should you just replace your JComponent with an entirely new one, or should you try to get access to the data and then remove the items and then re-add them.
In my example, I have a JTree and am not sure which would be the best method to use. Should I try to remove all the nodes, or sometimes I think it would be easier to just remove the tree component from my panel, create a new tree and re-populate it?
Thanks for any advice.

pjbarbour wrote:
I'm not quite sure what would be the best method for this. My client is using a 4x3 screen and SD projector at a large meeting, and they want me to just create a DVD that is letterboxed. I have one Premiere CS5 project that's 1920x1080, and another project that's 720x480 widescreen (1.2). I created a new sequence in both projects that is 720x480, 4x3 (0.9), and what I do is just scale the timeline down so that it's letterboxed. Is this the best method for achieving this? Or would you do something else? I don't like the idea of scaling my timeline down in Premiere.
Hello.
As Jim so rightly points out above, you do not need to do anything.
Just use your normal 16:9 widescreen footage, and author as normal.
Your player will letterbox automatically when it is connected to a 4:3 screen in setup (just make sure "Pan & Scan" is not also there)

Best method for dynamically populating PDF on the web?

Hi there,
I'm trying to find a web-based solution to populate text within an existing PDF with a person's name (using a name variable within the PDF body copy in several spots). I know that LiveCycle Designer is the best method for creating dynamic PDF's but since I'm on a Mac, LiveCycle Designer wasn't packaged with my CS5 Suite / Acrobat 9 and I'm not eager to run windows in parallel and pay for acrobat pro a second time just to have it on windows for the LiveCycle functionality...CS5 wasn't cheap ha.
So I'm trying to find out if there are alternative ways to achieve this without going down that road. I don't mind writing PHP or using some other programming language to set it up online, but I just seem to be finding many different methods coming up and cannot find the most straightforward solution.
Any help is greatly appreciated!

LiveCycle Designer won't do what you want. It requires server software: LiveCycle Forms will do the trick.
You can find information on it here: http://www.adobe.com/products/livecycle/forms/

Best Method for transferring projects back and fourth

Hello. I will soon be purchasing an iMac for home use and would like to get some advice on project transfer. I will be doing a lot of video editing back and fourth between the office and home. What is the best method for doing this? Where can i locate the files to make sure that I have everything and wont be missing anything when I bring it home, etc. Thanks for any advice!
Brandon

Use a (Firewire 800 or faster) external HD to keep your media, events and projects on.
You can then take the drive to work with you and back home. Use FCP X to transfer (or create) the event and projects on this drive and both macs will recognise it.
The drive must be formatted Mac OS Extended (journaled is not important for video drives).
Andy

Best method for keyframing with 3d camera 1 shot....

Similar Messages

Maybe you are looking for