Best method to create a spinnable flower windmill for iPad and Android

What is the best method to create a spinnable flower windmill for iPad and Android? I want to be able to drag and spin. The faster you drag, the faster it should spin. Each petal will have an image which will be its own link. Any links to tutorials, toolkits, and recent examples are greatly appreciated. Thank you.

Here's a whell that spins, but it has a spin button instead of being able to drag it:
http://www.switchonthecode.com/tutorials/creating-a-roulette-wheel-using-html5-canvas
Seems to me the best ui would be to be able to drag it and stop it or drag it and spin it at various speeds.

Similar Messages

How best to sync Outlook 2007 Calendar ad Contacts to Ipad and Android phone

How best to sync Outlook 2007 Calendar ad Contacts to Ipad2 and Android phone

How to transfer or sync content to your computer
As for the Android device... try googling for options.

Create Dynamic PDF for iPad and Android Devices

Hi ,
Is there any specific settings to be done to create PDF using Designer/Acrobat to work in iPad/iPhone and Android Devices. I googled a lot but not able to find anything specific.
Please advice.
Thanks
Kapil

Dynamic (XFA) forms are not supported on iOS at all.

How do I create 2 Recovery partitions: one for Lion and one for Mountain Lion?

Well that is basically the question:
How do I create 2 recovery partitions: one for Lion and one for Mountain Lion?
Reason is that I would like to keep the option to return to Lion, or even better, have a seperate partition for eacht?

can I access my programs from the other partition, so I can save space ...
No, as far as I know, each one is completely separate - especially if you're dealing with two different versions of OS's.
is it possible to safely make an extra partion on a running drive (it is my main computer ...) The disk is large enough ...
how large would this have to be
I've personally never done it on a running drive - have read it's possible, but don't want to suggest it since I've never done it and wouldn't be sure about the steps. This is how I got to two partitions on my iMac:
Originally, I had just one partition with Snow Leopard. I used CCC to clone that to an external drive. Booted into that drive and used DU to partition and erase the internal. I then cloned the new clone back. Also cloned the same thing to the other partition which I then upgraded to Lion. So I had two OS's - SL and Lion. I've now decided to clone my SL to an external drive for occasional use and installed ML on that partition - so now I have Lion and ML.
There are two ways to get a "fresh" install: either download the OS again and install it on a partition of your choice or, as I've done as well, copy the installer to a safe place so you don't need to download it again. It does include whatever apps/software is included in the OS. I've designated two smaller partitions on externals as my "fresh" installs of both Lion and ML for emergency or reinstall purposes (this is my way of dealing with not having install DVDs) - I took the time to install it there and then slowly add fresh installs of my important apps (either via download or install CD) - don't bother with the little/less used stuff, a current copy of that can be downloaded if and when I need it. I don't really update those two - that can also be done if/when I need it since that'll always change.
So, yesterday, I decided I wanted to start fresh with ML - booted into my fresh install of Lion (on external), wiped the SL partition on my internal and installed Lion. Decided to download a fresh copy of the ML installer and installed that. Then ran Software Update. After that, repaired permissions. Then I methodically opened every third party app and checked for updates - installed those where necessary. After all that, I simply copied (drag 'n drop) my entire Documents folder (which contains all my important data,, photos, etc) over from another backup.
This took a while, but mostly because of the long download times; the installs weren't all that bad. I should be running a really clean system now, especially since nothing was ported over except my Documents folder.

How to create a new document type for PO and Requisition

Hi All
Can you please help me with the steps of creating a new document type for PO and PR. Also the steps that need to be update for the procure pay cycle to work properly.
Once the document type is been created. I want to create the PO referecing the new PR and PO document type.I am new in MM.
Thanks, Ros

Hi,
1. You can create new PR and PO docu types at the following path:
For PR docu type:
First you need to create number range for docu type or you can use existing number range also. The path for creation of no. range is
SPRO>Materials Management->Purchasing->Purchase Requisition->Define Number Ranges
Then create PR docu type at below path and assign no. range to PR docu type here only
SPRO>Materials Management->Purchasing->Purchase Requisition->Define Document Types
For PO docu type:
Follow same procedure as mentioned for PR docu type. Path is
SPRO>Materials Management->Purchasing->Purchase Order->Define Number Ranges
SPRO>Materials Management>Purchasing->Purchase Order->Define Document Types
If you want to create PO referencing new PR docu type, link the PR docu type to PO docu type at below path:
SPRO>Materials Management->Purchasing->Purchase Requisition->Define Document Types--> Link purchase requisition - document type
Regards
Chetan

How can I Create a Client Configuration File for RemoteApp and Desktop Connection with Server 2012?

I have a working RDS RemoteApp site and looking to test out the feature in Windows 7 Control Panel\All Control Panel Items\RemoteApp and Desktop Connections
I came across this link: Create a Client Configuration File for RemoteApp and Desktop Connection and I believe this is what I need to do first, but these instructions are for
Server 2008, and I'm running 2012.
Any suggestions or tips on how I can begin testing this with Server 2012?

Hi,
You can manually enter the path to the 2012 feed and it will connect and download the RemoteApps and Desktop connections.
If you need a sample .wcx file I have posted one here a couple of times. If you want I will look for it and post a link.
-TP
I tried adding my URL's below, these are sample links that work for me right now for when I log into the web page, but neither of these work. And I'm not sure what I would need to do with or how to create a .wcx file.
When I type in my URL of: https://connect.mydomain.org/RDWeb, I get redirected to:
https://connect.mydomain.org/RDWeb/Pages/en-US/login.aspx?ReturnUrl=/RDWeb/Pages/en-US/Default.aspx

HT2513 I have a mac and an ipad. when i create and ical event on my mac and then sync to my ipad, the event replicates; however, when i create an ical event on my ipad and then sync, the ical event does not sync.

Question: I have a mac and an ipad. when i create an ical event on my mac and then sync, the event transfers to my ipad. HOWEVER: when i create an ical event on my ipad and then sync, the event does not transfer. what am i doing wrong???
cadybill

Greetings,
Go to Apple > Software Update and install all available updates until no more are offered.
On iPad go to Settings > General > Software Update and install any updates.
Follow this article for issues with calendars: http://support.apple.com/kb/TS2481
Hope that helps.

Best way to format my 16GB flash drive for Mac and PC transferring large power point files?

best way to format my 16GB flash drive for Mac and PC transferring large power point files?

format flash drive in Exfat for transferring files between Mac and Pc.
FORMAT TYPES
FAT32 (File Allocation Table)
Read/Write FAT32 from both native Windows and native Mac OS X.
Maximum file size: 4GB.
Maximum volume size: 2TB
You can use this format if you share the drive between Mac OS X and Windows computers and have no files larger than 4GB.
NTFS (Windows NT File System)
Read/Write NTFS from native Windows.
Read only NTFS from native Mac OS X
To Read/Write/Format NTFS from Mac OS X, here are some alternatives:
For Mac OS X 10.4 or later (32 or 64-bit), install Paragon (approx $20) (Best Choice for Lion)
Native NTFS support can be enabled in Snow Leopard and Lion, but is not advisable, due to instability.
AirPort Extreme (802.11n) and Time Capsule do not support NTFS
Maximum file size: 16 TB
Maximum volume size: 256TB
You can use this format if you routinely share a drive with multiple Windows systems.
HFS+ ((((MAC FORMAT)))) (Hierarchical File System, a.k.a. Mac OS Extended (Journaled) Don't use case-sensitive)
Read/Write HFS+ from native Mac OS X
Required for Time Machine or Carbon Copy Cloner or SuperDuper! backups of Mac internal hard drive.
To Read HFS+ (but not Write) from Windows, Install HFSExplorer
Maximum file size: 8EiB
Maximum volume size: 8EiB
You can use this format if you only use the drive with Mac OS X, or use it for backups of your Mac OS X internal drive, or if you only share it with one Windows PC (with MacDrive installed on the PC)
EXFAT (FAT64)
Supported in Mac OS X only in 10.6.5 or later.
Not all Windows versions support exFAT.
exFAT (Extended File Allocation Table)
AirPort Extreme (802.11n) and Time Capsule do not support exFAT
Maximum file size: 16 EiB
Maximum volume size: 64 ZiB
You can use this format if it is supported by all computers with which you intend to share the drive. See "disadvantages" for details.

Create withholding tax data subsequently for reconciled and open items in c

Hi All,
Mine is a US co code and I have a vendor for which invoice and payment documents are posted. After posting the invoice i found that the vendor is subjected to classic withholding tax which i did not calculate when posting invoice, making payments.
Now i have changed the vendor master data with relevant withholding tax details.
I know the program RFWT0020 allows us to create withholding tax data subsequently for reconciled and open items in cases where vendors or customers become liable for withholding tax with a tax rate of 0 %.
It is not working out for me.
Can any body help me on this.
Thanks in advance.

Dear all,
by se38 --> report documentation, You can read carefully the following:
The auxiliary program makes it possible to convert both classic and extended withholding tax data. However, with classic withholding tax, ONLY VENDOR data can be converted.
In addition, the program enables the withholding tax code to be changed for reconciled and open items with existing withholding tax data. For this, the tax rate of the existing withholding tax data as well as the tax rate of the new withholding tax code must be 0%. The new withholding tax codes are taken from the customer or vendor master data. In the case of extended withholding tax, the withholding tax code is only changed if the related withholding tax categories are the same. The withholding tax base amount is not changed by this procedure.
Recreating or changing the withholding tax data requires that the program first be executed for INVOICES and then executed for PAYMENTS in a subsequent step.
I hope this helps You.
Mauri

How to create a positve pay file for ACH and Wire transfers through F110

Hi All,
I need to create a positive pay file for ACH and Wire transfers to the bank for auto clearing. For checks we have a standard program (RFCHKE00) to create the positive pay file which creates the output lists after the F110 payment process. Is there any standard SAP program available which creates the Positive pay file (Output list) for ACH and wire transfers through F110.
Thanks
Sridhar

Please let your abaper create a 'Z' program using RFCHKE00. For example 'ZRFCHKE00' and use it in the same way as you currently use RFCHKE00 for checks.
After the program is created, use SE38 and save it as a variant using your own specifications. Thereafter, in F110, when carrying out a payment run, under 'Printout/data medium', enter the program name under "Lists" with the variant. Then click on 'Maintain Variants' and make the necessay specifications there as well.
Instruct your end-users to enter this program when running ACH and wire transactions through F110.
Please let us know if this information was helpful.
Thanks,
Elias

How to create a generic with iMovie for iPad?

How do i create A generic with iMovie for iPad?

luckyuis wrote:
Hi All,
> I have generated a report showing data for past 12 months and after that i need to include a chart showing Month on X axis with data for past 12 months ..for example if i run the report for June 2011 then on the chart it should take as june 11..>may 11..>april 11........so on june 10 with respect to other values
>
> fyi .. i am using type: Numeric Axis..> Date Axis line chart and created seperate formule on top of date field to get past 12 months data
>
> Please advise how can i do that on the chart
>
> Thanks much,
> Lucky
Once you pull the data, goup on the date monthly, most recent first ,and then graph the summaries in the group.

Creating a external content type for Read and Update data from two tables in sqlserver using sharepoint designer

Hi
how to create a external content type for Read and Update data from two tables in sqlserver using sharepoint designer 2010
i created a bcs service using centraladministration site
i have two tables in sqlserver
1)Employee
-empno
-firstname
-lastname
2)EmpDepartment
-empno
-deptno
-location
i want to just create a list to display employee details from two tables
empid firstname deptno location
and same time update in two tables
adil

When I try to create an external content type based on a view (AdventureWorks2012.vSalesPerson) - I can display the data in an external list. When I attempt to edit it, I get an error:
External List fails when attached to a SQL view
Sorry, something went wrong
Failed to update a list item for this external list based on the Entity (External Content Type) 'SalesForce' in EntityNamespace 'http://xxxxxxxx'. Details: The query against the database caused an error.
I can edit the view in SQL Manager, so it seems strange that it fails.
Any advice would be greatly GREATLY appreciated.
Thanks,
Randy

What I need to create and publish a magazine for iOS and Android?

Hi!
I would like to know what I need to design, create and publish a magazine for iOS and Android. I would also like to know what products I need, what price would you pay and what process I have to follow to carry out this work.
Thanks in advance!

It is NOT possible to create a Single Edition app for Android. Single Edition apps work only on the iPad.
You can create Single Edition apps using any account—CC, Pro, or Enterprise—and if you cancel your DPS subscription, these Single Edition (or single-folio) apps are still available in the App Store as long as you maintain your iOS account with Apple.
For multi-folio apps, the app container is downloaded from an app store, but the folios are downloaded from the Adobe Distribution Service. If you cancel your DPS subscription, the Adobe Distribution Service basically shuts down for that app. New users can still download your apps from an app store, but the library will be empty. Existing users can still view the folios they've downloaded, but they can't get any updates or new folios.

I have created a spreadsheet on numbers for ipad with a list of customers as a drop down menu. How can i make their address appear underneath when i select the customer?

I have created a spreadsheet on numbers for ipad with a list of customers as a drop down menu. How can i make their address appear underneath when I select the customer?
iselect the customer?

Hi bazza,
We won't be able to put the address from a formula into the same cell that you enter the customer's name. We can put the address in the cell under the customers name.
First let's take James advice and concatenate the address in the address table.
Here is the formula in G2
=CONCATENATE(B2&"
",C2&"
",D2&"
",E2)
It shows this way because after I clicked on B2 and typed [&"] (no brackets) I typed option-return
This gives you your new line. Then I typed the closing ". I repeated this for the rest of the address.
Next we want to bring this to your order sheet. I prefer using the two formulas OFFSET and MATCH instead of VLOOKUP.
base tells OFFSETwhere to start counting from. Click A1.
row-offset is for the row. we will use MATCH() -1 to give us the row.
What MATCH does is give you the row number where something is found and you can specify an exact match. I usually construct the MATCH formula first and then cut and paste it into OFFSET. MATCH looks like this: MATCH(A2,Table 1::A,0). A2 is what we are looking for, Table 1A::A is where we are looking (the entire column A), and 0 means we want an exact match. Can you see it inside the OFFSET formula? Notice that we had to subtract 1 from its result.
column-offset tells OFFSET which column A=0 so we want 6.
we ignore "rows", "colomns" we don't need them.
If this seems like too much, just break it down into small pieces.
quinn

Can I create books for the iBookstore for iPad and iPhone using Pages?

Can I create books for the iBookstore for iPad and iPhone using Pages?

No problem, Peter. iBooks Author makes a lot of things much easier than trying to grapple with a standard epub, but it also has some big limitations, like iPad only, and ibookstore only.
EDIT It's not really suitable for something like a novel, for example, although it's great when you need lots of illustrations and movies and such.

Best method to create a spinnable flower windmill for iPad and Android

Similar Messages

Maybe you are looking for