Best practice for interface

I would assume with all the different interfaces available in SAP for various modules SAP would ahve published a white paper on how to determine the best interface format for a system and what would be the best practice around it. Can someone share a process or methodology on how to determine the best interfaces practice?

Hueter, I'm not sure I'm following you. Maybe you could post an example. I don't see how to get access to the front panel controls of an FPGA subvi from the host vi--even wihen configured through the connector pane--without creating complimentary controls/indicators on the main FPGA VI block diagram (which seems to defeat the purpose of the exercise). It seemed like an intriguing idea, but it doesn't seem possible to configure a reference to a fpga subvi while the main fpga vi is running (only one reference to an FPGA is allowed, at least on crios).
Jarrod, I am not talking about accessing various bitfiles (only one can run at a time, right?). I am talking about creating standard FPGA interface code that can be used on multiple projects without having to reconstruct the VIs based on changes to the FPGA Reference. For example, I have interface code that is used to talk to various sensors through the c-series serial module. Those interface VIs depend on a specific FPGA reference to work. When I create a new project for a crio that has other modules besides the 9870, I will inevitably have a new FPGA VI. There is a subset of the new FPGA VI that is identical to the purely serial one (1 loop/state machine), but other code will be added to handle the other modules. Now the FPGA reference is different, and all my interface VIs are broken when I try to use the new FPGA reference. I have to change the FPGA reference in my interface VIs and then go through an reselect all the IO manually. It's not conducive to reuseable code.
I guess one possibility is to create one Main FPGA VI that has all the IO I could ever need, and then just use whatever subvi's I want in it. I believe this is essentially what's happening in the scan engine. A microcontroller is created on the FPGA with standard IO, and everything is accessed through the abstracted IO.
Chris

Similar Messages

Networking "best practice" for setting up a farm

Hi all.
We would like to set an OracleVM farm, and I have a question about "best practice" for
configuring the network. Some background:
- The hardware I have is comprised of machines with 4 gig-eth NICs each.
- The storage will be coming primarily from a backend NAS appliance (Netapp, FWIW).
- We have already allocated a separate VLAN for management.
- We would like to have HA capable VMs using OCFS2 (on top of NFS.)
I'm trying to decide between 2 possible configurations. The first would keep physical separation
between the mgt/storage networks and the DomU networks. The second would just trunk
everything together across all 4 NICs, something like:
Config 1:
- eth0 - management/cluster-interconnect
- eth1 - storage
- eth2/eth3 => bond0 - 8021q trunked, bonded interfaces for DomUs
Config 2:
- eth0/1/2/3 => bond0
Do people have experience or recommendation about the best configuration?
I'm attracted to the first option (perhaps naively) because CI/storage would benefit
from dedicated bandwidth and this configuration might also be more secure.
Regards,
Robert.

user1070509 wrote:
Option #4 (802.3ad) looks promising, but I don't know if this can be made to work across
separate switches.It can, if your switches support cross-switch trunking. Essentially, 802.3ad (also known as LACP or EtherChannel on Cisco devices) requires your switch to be properly configured to allow trunking across the interfaces used for the bond. I know that the high-end Cisco and Juniper switches do support LACP across multiple switches. In the Cisco world, this is called MEC (Multichassis EtherChannel).
If you're using low-end commodity-grade gear, you'll probably need to use active/passive bonds if you want to span switches. Alternatively, you could use one of the balance algorithms for some bandwitch increase. You'd have to run your own testing to determine which algorithm is best suited for your workload.
The Linux Foundation's Net:Bonding article has some great information on bonding in general, particularly on the various bonding methods for high availability:
http://www.linuxfoundation.org/en/Net:Bonding

Best practice for mouseless ADF applications

I am developing an ADF application where the users do not want to use the mouse.
So I would like to know if there are a best practice for this?
I am already using the accessKey functionality and subforms defaultCommand
But I have had problems setting focus to objects on a page like tables. I would like a button to return the focus to the table after it has made the command like delete.
I have implemented a solution where I have found inspiration several threads and other webpages (see below).
Is this solution okay?
Are there any problems with it?
I would also like to know if there are better pathways to go like
out of the box solutions,
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/79-global-template-button-strategy-360139.pdf (are there an example implementation?), or
http://one-size-doesnt-fit-all.blogspot.dk/2010/11/adf-ui-shell-supporting-global-hotkeys.html
in advance thanks
Inspiration webpages
https://blogs.oracle.com/jdevotnharvest/entry/how_to_programmatically_set_focus
http://technology.amis.nl/2008/01/04/adf-11g-rich-faces-focus-on-field-after-button-press-or-ppr-including-javascript-in-ppr-response-and-clientlisteners-client-side-programming-in-adf-faces-rich-client-components-part-2/
how to Commit table by writting Java code in Managed Bean?
Table does not refresh and getting error as UIComponent is Null
A short description of the solution:
(jdeveloper version 11.1.1.2.0)
--- Example where I use onSetFocus in jsff page
<af:commandButton text="#{hrsusuiBundle.FOCUS}" id="cb10"
partialSubmit="true" accessKey="f"
shortDesc="Alt+Shift+F"
actionListener="#{managedBean_clientUtils.onSetFocus}">
<af:clientAttribute name="focusField" value="t1"/>
</af:commandButton>
--- Examples where I use doTableActionAndSetFocus in jsff page
--- There have to be a binding in the jsff page to delete, commit and rollback
<af:commandButton text="#{hrsusuiBundle.DELETE}" id="cb4"
accessKey="x"
shortDesc="Alt+Shift+X"
partialSubmit="true"
actionListener="#{managedBean_clientUtils.doTableActionAndSetFocus}">
<af:clientAttribute name="focusField" value="t1"/>
<af:clientAttribute name="actionField" value="Delete"/>
</af:commandButton>
<af:commandButton text="#{hrsusuiBundle.COMMIT}" id="cb5"
accessKey="s" shortDesc="Alt+Shift+S"
partialSubmit="true"
actionListener="#{managedBean_clientUtils.doTableActionAndSetFocus}">
<af:clientAttribute name="focusField" value="t1"/>
<af:clientAttribute name="actionField" value="Commit"/>
</af:commandButton>
<af:commandButton text="#{hrsusuiBundle.ROLLBACK}" id="cb6"
accessKey="z" shortDesc="Alt+Shift+Z"
partialSubmit="true"
actionListener="#{managedBean_clientUtils.doTableActionAndSetFocus}"
immediate="true">
<af:resetActionListener/>
<af:clientAttribute name="focusField" value="t1"/>
<af:clientAttribute name="actionField" value="Rollback"/>
</af:commandButton>
--- This is the java class I use
--- It is published in adfc-config.xml as a request scope managedbean
public class ClientUtils {
public ClientUtils() {
public void doTableActionAndSetFocus(ActionEvent event) {
RichCommandButton rcb = (RichCommandButton)event.getSource();
String focusOn = (String)rcb.getAttributes().get("focusField");
String actionToDo = (String)rcb.getAttributes().get("actionField");
UIComponent component = null;
String clientId = null;
component = JSFUtils.findComponentInRoot(focusOn);
clientId = component.getClientId(JSFUtils.getFacesContext());
if ( "Delete".equals(actionToDo) || "Commit".equals(actionToDo) || "Rollback".equals(actionToDo) ){
BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
OperationBinding operationBinding = bindings.getOperationBinding(actionToDo);
Object result = operationBinding.execute();
AdfFacesContext.getCurrentInstance().addPartialTarget(component);
if (clientId != null) {
makeSetFocusJavaScript(clientId);
public static String onSetFocus(ActionEvent event) {
RichCommandButton rcb = (RichCommandButton)event.getSource();
String focusOn = (String)rcb.getAttributes().get("focusField");
String clientId = null;
if (focusOn.contains(":")) {
clientId = focusOn;
} else {
clientId = findComponentsClientIdInRoot(focusOn);
if (clientId != null) {
makeSetFocusJavaScript(clientId);
return null;
private static void writeJavaScriptToClient(String script) {
FacesContext fctx = FacesContext.getCurrentInstance();
ExtendedRenderKitService erks = null;
erks = Service.getRenderKitService(fctx, ExtendedRenderKitService.class);
erks.addScript(fctx, script);
public static void makeSetFocusJavaScript(String clientId) {
if (clientId != null) {
StringBuilder script = new StringBuilder();
//use client id to ensure component is found if located in
//naming container
script.append("var textInput = ");
script.append("AdfPage.PAGE.findComponentByAbsoluteId");
script.append ("('"+clientId+"');");
script.append("if(textInput != null){");
script.append("textInput.focus();");
script.append("}");
writeJavaScriptToClient(script.toString());
public static String findComponentsClientIdInRoot(String id) {
UIComponent component = null;
String clientId = null;
component = JSFUtils.findComponentInRoot(id);
clientId = component.getClientId(JSFUtils.getFacesContext());
return clientId;
}

Hi,
I am developing an ADF application where the users do not want to use the mouse. So I would like to know if there are a best practice for this?
Well HTML (and this is the user interface you see) follows a tab index navigation that you follow with "tab" and "shift+tab". Anything else is a short cut for which you use mnemonics (as you already do) or shortcuts (explained in http://one-size-doesnt-fit-all.blogspot.dk/2010/11/adf-ui-shell-supporting-global-hotkeys.html). There is a distinction to make between non-web environments (which I think you and your users have abackground in) and client desktop environments. Browsers block some keyboard functionality for their own purpose. So you may have to find a list of keys first that work across browsers. Unlike desktop clients, which allow you to "press a button" without the button to take focus, this cannot be done on the web. So you need to be clever here, avoiding buttons at all.
The following paper is about JavaScript in ADF and explains the basics for what Chris Muir explains in : http://one-size-doesnt-fit-all.blogspot.dk/2010/11/adf-ui-shell-supporting-global-hotkeys.html
http://www.oracle.com/technetwork/developer-tools/jdev/1-2011-javascript-302460.pdf
It has the outline for how to register short cut keys that perform a specific action (e.g. register ctrl+d to delete the current row you are on, or press F11 to execute a query (similar to Oracle Forms frmres files)). However, be aware that this includes some code you have to write (actually quite some code to be honest).
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/79-global-template-button-strategy-360139.pdf (are there an example implementation?), or
http://one-size-doesnt-fit-all.blogspot.dk/2010/11/adf-ui-shell-supporting-global-hotkeys.html
Actually these are implementations as they come with example code for you to use and customize, do they? So what is this question asking for more ? Also note that global buttons don't quite have anything in common with the question you asked. I assume you want to see it as an implementation of the Forms toolbar that operates on the form or table the focus is in. This however does not work for the web as there is nothing that keeps track of which component has a focus and to what iterator (data block) it belongs. This would involve even more coding (though possibly doable)
Frank

Best practice for consuming web services

Hi
we are consuming web service in orchestration by "Add Generated Item".By using this option it creates 1 orch,1xsd file and some bindings.
we have different projects for schemas,maps and orchestration under our solution in visual studio.
Now i need to know that what will be the best practice for consuming web service in orchestration i mean in which project should i use "add generated item" (in orchstration project or in schemas project) coz it generates both 1 orch and 1
schema.
thanks

From a service orientation perspective you should abstract the service artifacts from the other artifacts. Otherwise it will be very difficult to update the service interface without affecting the other artifacts. For example you don't want to have to redeply
your entire application if only one field changes in the service you consume.
So I typically generate the items, remove the unnecessary stuff, and put them in a separate project.
Depending on the control you have over the services you want to consume, it would even be better to create another layer of abstraction. By that I mean create your own interface (schema) and map that one to the one the service exposes. This basically
is only necessary if you consume external services that are beyond your control. By abstracting the interface it exposes, you limit the impact of changes of that interface on the rest of your system. All changes are abstracted behind your own interface.
If you consume internal services, you can probably control the way the interface is defined. In a service oriented world all internal services expose a well known interface, based on the domain objects you have within your organisation.
Jean-Paul Smit | Didago IT Consultancy
Blog |
Twitter | LinkedIn
MCTS BizTalk 2006/2010 + Certified SOA Architect
Please indicate "Mark as Answer" if this post has answered the question.

"Best practice" for components calling components on different panels.

I'm very new to Swing. I have been learning from tutorials, but these are always relatively simple interfaces , in which every component and container is initialised and added in the constructor of a main JFrame (extension) object.
I would assume that more complex, real-world examples would have JPanels initialise themselves. For example, I am working on a project in which the JFrame holds multiple JPanels. One of these Panels holds a group of JToggleButtons (grouped in a ButtonGroup). The action event for each button involves calling the repaint method of one of the other Panels.
Obviously, if you initialise everything in the JFrame, you can simply have the ActionListener refer to the other JPanel directly, by making the ActionListener a nested class within the JFrame class. However, I would like the JPanels to initialise their own components, including setting the button actions, by using an extension of class JPanel which includes the ActionListeners as nested classes. Therefore the ActionListener has no direct access to JPanel it needs to repaint.
What, then, is considered "best practice" for allowing these components to interact (not simply in this situation, but more generally)? Should I pass a reference to the JPanel that needs to be repainted to the JPanel that contains the ActionListeners? Should I notify the main JFrame that the Action event has fired, and then have that call "repaint"? Or is there a more common or more correct way of doing this?
Similarly, one of the JPanels needs to use a field belonging to the JFrame that holds it. Should I pass a reference to this object to the JPanel, or should I have the JPanel use "getParent()", or some other method?
I realise there are no concrete answers to this query, but I am wondering whether there are accepted practices for achieving this. My instinct is to simply pass a JPanel reference to the JPanel that needs to call repaint, but I am unsure how extensible this would be, how tightly coupled these classes would become.
Any advice anybody could give me would be much appreciated. Sorry the question is so long-winded. :)

Hello,
nice to get feedback.
I've been looking at a few resources on this issue from my last post. In my application I have been using the Observer and Observable classes to implement the MVC pattern suggested by T.PD.(...)
Two issues (not fatal, but annoying) with this are:
-Observable is a class, not an interface; since most of my Observers already extend JPanel (or some such), I have had to create inner classes.
-If an Observer is observing multiple Observables, it will have to determine which Observer called its update() method (by using reference equality or class comparison or whatever). Again, a very minor issue, but something to keep in mind.I don't deem those issues are minor. The second one in particular, is rather annoying in terms of maintenance ("Err, remind me, which widget is calling this "update()" method?").
In addition to that, the Observable/Observer are legacy non-generified classes, that incurr a loosely-typed approach (the subject and context arguments to the update(Observable subject, Object context) methods give hardly any info in themselves, and they generally have to be cast to provide app-specific information.
Note that the "notification model" from AWT and Swing widgets is not Observer-Observable, but merely EventListener . Although we can only guess what reasons made them develop a specific notification model, I deem this essentially stems from those reasons.
The contrasting appraoches are discussed in this article from Bill Venners: The Event Generator Idiom (http://www.artima.com/designtechniques/eventgenP.html).
N.B.: this article is from a previous-millenary series of "Design Techniques" articles that I found very useful when I learned OO design (GUI or not).
One last nail against the Observer/Observable model: these are general classes that can be used regardless of the context (GUI/non-GUI code), so this makes it easier to forget about Swing threading rules when using them (essentially: is the update method called in the EDT or not).
If anybody has any information on the performance or efficiency of using Observable/ObserverI would be very surprised if this had any performance impact. If it had, that would mean that you have either:
- a lot of widgets that are listening to one another (and then the Mediator pattern is almost a must to structure such entangled dependencies). And even then I don't think there could be any impact below a few thousands widgets.
- expensive or long-running computation in the update methods. That's unrelated to the notification model itself.
- a lot of non-GUI components that use the Observer/Observable to communicate among themselves - all the more risk then, to have a GUI update() called outside the EDT, see remark above.
(or whether there are inbuilt equivalents for Swing components)See discussion above.
As far as your remark 2 goes (if one observer observes more than one subjects, the update() method contains branching logic) : this also occurs with the Event Delegation model indeed: for example, it is quite common that people complain that their actionPerformed() method becomes unwieldy when the same class listens for several JButtons.
The usual advice for this is, use anonymous listeners, each of which handles the event from only one source (and generally very close in code to the definition of that source), and that simply translates the "generic" event notification method into a specific method call of a Controller or Mediator .
Best regards.
J.
Edited by: jduprez on May 9, 2011 10:10 AM

What is the best practice for APO - Demand planning implementation

Hi,
M client wants to implement demand planning.
Cient has come up with one scenario like a New Customer is created in ECC, and if I use BI and then APO flow for Demand planning, user will have to wait for another day. (AS BI is always having one day delay).
For this scenarios user is insisting on ECC and APO-DP interface.
Will anybody suggest what should be the best practice for Demand planning.
ECC -> Standalone BI -> Planning area (Planning is done in APO) -> Stand alone BI
Or ECC -> APO-DP (Planning is done in APO) -> Standalone BI system
I hope I am able to explain my scenario.
Regards,
Saurabh

Any suggestions !!

Best practices for apps integration with third party systems ?

Hi all
I would like to know if there is any document from oracle or from your own regarding best practices for apps integration with third party systems.
For example, in particular, let's say we need customization in a given module(ex:payables) need to provide data to a third party system, consider following:
outbound interface:
1)should third party system should be given with direct access to oracle database to access a particular payments data information table/view to look for data ?
2) should oracle create a file to third party system, so that it can read and do what it need to do?
inbound:
1) should third party should directly login and insert data into tables which holds response data?
2) again, should third party create file and oralce apps will pick up for further processing?
again, there could be lot of company specific scenarios like it has to be real time or not... etc...
How does companies make sure third party systems are not directly dipping into other systems (oracle apps/others), so that it will follow certain integration best practices.
how does enterprise architectute will play a role in this? can we apply SOA standards? should use request/reply using Tibco etc?
Many oracle apps implementations customizations are more or less directly interacting with third party systems by including code to login into respective third party systems and vice versa.
Let me your know if you have done differently and that would help oracle apps community.
thanks
rrb.

you want to send idoc to third party system (NONSAP).
what kind of system is it? can it handle http requests
or
can it handle webservice?
which version of R/3 you are using?
what is the mechanism the receiving system has, to receive data?
Regards
Raja

Best Practice for Servlets

I guess I'm asking for most peoples' input on what I'm planning to do here ....
Here's what I want to do, and know a bit about.
o I want to make a servlet that serves only XML.
o After that, I want to transform the XML into web pages, RSS feeds etc.. using XSLT.
Here's what I'm not so sure about...
o How should I implement the interface to the web-based aspects? Should the servlet be coded to display HTML pages on "GET" requests? Or should I use a pile of HTML files to make forms?
o What do I use to perform the XSLT transformations? Where should the set of solutions be placed relative to my servlet? Would a user then access this solution rather than the servlet itself?
o How do I code the servlet on one machine, and then test it on another without breaking the libraries? How do I set up any libraries I might have to use (like for XSLT transformations) on the server?
Any other advice here? I'm sure this is done often, but I can't find a resource that explains the best practices for it all.
I know this sounds like a lot of stupid questions. I've had lots of programs working with Java before, but I'm at a loss as to how I'm supposed to package libraries I use in my programs - moreso with a servlet. To make matters worse, I plan on using MySQL as the database.
If there's some wizard on the forums here who's willing to say more than just "RTFM" (of which there is none to answer my questions together as one), I'd be very very happy ":^)

Let me re-pose my question so as to be specific
enough to not be picked apart in my answer.
I want to FIRST AND FOREMOST, create a servlet that
serves up XML based on parameters given to it (how?
who cares.).What does "serves up XML" mean?
Let's be precise. Do you intend the servlet to send the XML back to the client? Or is the XML an intermediate step in your processing? (Yes, it matters.)
Then, I want to create interfaces (HTML, RSS,
boogledeedoo) to this XML data by having either JSP,
another servlet or insert something else here,
transform the XML into whatever the desired format
is."interface" is a loaded term in Java. What do you mean by it?
>
My assumption is that I'll make the servlet that is
capable of outputting my desired XML data and then
create another servlet that will poke it for data as
needed to transform the XML into HTML. This servlet
would also likely serve as the web site itself and
would manage user logins etc...(persistance yaddy
yadda)You're not thinking about this properly.
"yadda yadda" == muddled thinking.
My other assumption is that I'll make another servlet
that will poke the XML servlet and transform that
into RSS or anything else I can dream up.How does "poke the XML servlet" fit into the request/response protocol that is HTTP? Please explain.
-=-!REASONING!-=-
Previously, when I was working with PHP, I liked to
make scripts that would display interfaces and post
to themselves. OK, now I see. "interface" == GUI in a browser to you. Very good.
You can create a JSP that is an interface. You can have that JSP submit the HTTP POST or GET request to itself. No problem there, as long as "itself" knows what to do with the request.
It was a nice way of creating a
complete little package. Everything for one function
was encapsulated nicely under one roof. No excessive
HTML files all over the place to nurture.A simple problem, a simple solution. You can do that with a JSP.
Look. Part of my inability to describe this well is
because I DO feel like I'm in a lot of directions at
once. Or you don't understand the technology very well.
But I have to be in order to pull together
some sort of plan for myself. I understand many
concepts and have just finished studying object
oriented design etc..."Just finished"? How long did it take?
I know things about how Tomcat does connection
pooling for SQL connections.Great. Not much to understand there. It's harder to figure out how to do n-tier apps with more than one page well.
I do know how to use Google, probably a lot better
than most. But rest assured, I've yet to find a
little guide as complete as any of the "LAMP" books
there are out there. Which by the way, I have never
purchased.That's because Java Enterprise Edition isn't intended for little problems. LAMP is. Maybe the limitation is that you are used to "little" problems and not bigger ones.
If JEE seems scattered and complex, it's because it is. It encompasses more than LAMP.
I'm confident in good guidance, and not a heartfelt
smackdown. I'm still waiting for some clear suggestions.I gave you one, you just didn't know it: go read about Spring.
http://www.springframework.org
It'll help you structure complex apps from the user interface to the database in the back.
You're welcome.
%

Best Practice for Recording to HDD's.

I want some answers from some people who have been using Logic for a while and have experience in this topic. I have a 2010 MBP 13" with 1 Firewire 800 port, after looking for a cheap quality interface i purchased a Saffire Pro 14 which has a Firewire 6pin interface and i assume is Firewire 400mbps. The interface also doesn't have an extra Firewire port and the manual says not to "daisy-chain" becuase of latency and CPU spikes. Honestly i haven't noticed any problems with my HDD I/O in Logic, when i skip around it peaks but never any errors. I formatted an old 160GB Sata 1 drive and hooked it up over USB, i noticed that when i "skip" arround or w/e its called it doesn't peak (get red) anymore. I want to know peoples experience with Daisy chaining firewire devices, and using USB HDD's.
When i invest more money, would it be ok to stick with my interface for now and get a Glyph drive and daisy chain my interface on at the end? Should i stick with USB storage? Should i stick with internal 5400RPM drive? Should i upgrade it to a 7200RPM ( my original idea). In I.T. we call it best practices, whats the best practice for storing your audio/logic files on a Mac when running Logic.

Please don't just tell me Firewire is faster than USB.....I'm an I.T. Proffesional (wishing i went to school for recording ) I know how comptuers work, i build them and fix them all day. I want to know from peoples personal experience what they run and their suggestions. Thanks so much!

Best practice for Global Address?

Good Morning,
I am new to Cisco firewalls and would like to know what is the best practice for creating an external ip address and port into my network and then redirecting that to a specific machine. I am thinking of using a global ip address and then only allowing this type of traffic to talk to the specific destnation and on that specific port. Is this the correct course of action? Or os there a better or more effecient way of allowing this process using ADSM.
Troy
Message was edited by: Troy Currence

Hi,
Basically when you are attempting to allow traffic from the external public network to some of your servers/hosts you will either use Static NAT or Static PAT
Static NAT is when you bind a single public IP address to be used by only one internal host. This is usually the preferred option if you can spare a single public IP address for your server, meaning you probably have a small public subnet from your ISP.
Static PAT is when you only allocate certain ports on your public IP address and map them to a local port on the host. This is usually the option when you only have a single public IP address that is configured on your ASAs external interface. Or perhaps in a situation when you just want to conserver your public IP addresses even though you might have a few of them.
In Static NAT case you configure the Static NAT and use the interface ACL to allow the services you require.
In Static PAT you only create a translation for a specific port/service so only connections to that port are possible. Naturally you will also have to allow those services/ports in the interface ACL just like with Static NAT.
Again if you can spare the public IP addresses then I would go with Static NAT or if you only have a single or few IP addresses you can consider Static PAT (Port Forward) also.
I dont personally use ASDM for configurations but can help you with the required CLI format configurations. These can actually be done through ASDM also from the Tools -> Command Line Interface menus at the top.
Hope this helps
- Jouni

Best Practice for PDF print forms based on SAP standard

Hi,
I have copied the SAP standard PDF form F_D_INT_SCALE_00 to a Z form, and am using it in conjunction with the standard print program RFDZIS01_PDF. However I need to output some additional fields that are not supplied by the print program / interface (for example Customer VAT number).
What is the best practice for achieving this? As far as I can see the only way is to take a copy of the standard print program and modify it to select the extra data, and modify the interface. I never like taking copies of standard programs though for obvious reasons.
If I had this requirement with a smartform it would be a simple case of embedding ABAP code into the Z smartform and leaving the print program alone, but unfortunately there is no provision for the non-PDF version of the Interest Letter to be sent by email.
Thanks in advance,
Vindaloo

Thanks for your reply Robert.
However I think you are referring to Smartforms when you mention Code Initialization and Global Data declarations. I need to know the best way to modify copies of standard Adobe Print Forms.
Regards,
Vindaloo

Highly Required CRM 5.0 Best practices for CRM Service Module

Dear all,
I have been searching for CRM 5.0 version best practices in Internet quiete a long period, but could not find anywhere.
currently SAP is providing only best practices for SAP CRM 2007 version.
since most of configuration is differing because of Webclient Interface, I request you to refer a source from where I can get the CRM 5.0 Best Practices for Service module.
Your suggestions and help will be highly appreciated.
Best regards
Raghu ram

Hi Srini,
<removed by moderator>
Thank you & Best regards
Raghu ram
Edited by: Raghu Ram on Jul 16, 2009 6:09 AM
Edited by: Raghu Ram on Jul 16, 2009 6:11 AM
Moderator message please review the rules of engagement located here:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/home/rulesofEngagement
Edited by: Stephen Johannes on Jul 16, 2009 8:12 AM

Best Practices for FSCM Multiple systems scenario

Hi guys,
We have a scenario to implement FSCM credit, collections and dispute management solution for our landscape comprising the following:
a 4.6c system
a 4.7 system
an ECC 5 system
2 ECC6 systems
I have documented my design, but would like to double check and rob minds with colleagues regarding the following areas/questions.
Business partner replication and synchronization: what is the best practice for the initial replication of customers in each of the different systems to business partners in the FSCM system? (a) for the initial creation, and (b) for on-going synchronization of new customers and changes to existing customers?
Credit Management: what is the best practice for update of exposures from SD and FI-AR from each of the different systems? Should this be real-time for each transaction from SD and AR (synchronous) or periodic, say once a day? (assuming we can control this in the BADI)
Is there any particular point to note in dispute management?
Any other general note regarding this scenario?
Thanks in advance. Comments appreciated.

Hi,
I guess when you've the informations that the SAP can read and take some action, has to be asynchronous (from non-SAP to FSCM);
But when the credit analysis is done by non-SAP and like an 'Experian', SAP send the informations with invoices paid and not paid and this non-SAP group give a rate for this customer. All banks and big companies in the world does the same. And for this, you've the synchronous interface. This interface will updated the FSCM-CR (Credit), blocking or not the vendor, decreasing or increasing them limit amount to buy.
So, for these 1.000 sales orders, you'll have to think with PI in how to create an interface for this volume? What parameters SAP does has to check? There's an time interval to receive and send back? Will be a synchronous or asynchronous?
Contact your PI to help think in this information exchange.
Am I clear in your question?
JPA

Best practice for ASA Active/Standby failover

Hi,
I have configured a pair of Cisco ASA in Active/ Standby mode (see attached). What can be done to allow traffic to go from R1 to R2 via ASA2 when ASA1 inside or outside interface is down?
Currently this happens only when ASA1 is down (shutdown). Is there any recommended best practice for such network redundancy? Thanks in advanced!

Hi Vibhor,
I test ping from R1 to R2 and ping drop when I shutdown either inside (g1) or outside (g0) interface of the Active ASA. Below is the ASA 'show' failover' and 'show run',
ASSA1# conf t
ASSA1(config)# int g1
ASSA1(config-if)# shut
ASSA1(config-if)# show failover
Failover On
Failover unit Primary
Failover LAN Interface: FAILOVER GigabitEthernet2 (up)
Unit Poll frequency 1 seconds, holdtime 15 seconds
Interface Poll frequency 5 seconds, holdtime 25 seconds
Interface Policy 1
Monitored Interfaces 3 of 60 maximum
Version: Ours 8.4(2), Mate 8.4(2)
Last Failover at: 14:20:00 SGT Nov 18 2014
This host: Primary - Active
Active time: 7862 (sec)
Interface outside (100.100.100.1): Normal (Monitored)
Interface inside (192.168.1.1): Link Down (Monitored)
Interface mgmt (10.101.50.100): Normal (Waiting)
Other host: Secondary - Standby Ready
Active time: 0 (sec)
Interface outside (100.100.100.2): Normal (Monitored)
Interface inside (192.168.1.2): Link Down (Monitored)
Interface mgmt (0.0.0.0): Normal (Waiting)
Stateful Failover Logical Update Statistics
Link : FAILOVER GigabitEthernet2 (up)
Stateful Obj xmit xerr rcv rerr
General 1053 0 1045 0
sys cmd 1045 0 1045 0
up time 0 0 0 0
RPC services 0 0 0 0
TCP conn 0 0 0 0
UDP conn 0 0 0 0
ARP tbl 2 0 0 0
Xlate_Timeout 0 0 0 0
IPv6 ND tbl 0 0 0 0
VPN IKEv1 SA 0 0 0 0
VPN IKEv1 P2 0 0 0 0
VPN IKEv2 SA 0 0 0 0
VPN IKEv2 P2 0 0 0 0
VPN CTCP upd 0 0 0 0
VPN SDI upd 0 0 0 0
VPN DHCP upd 0 0 0 0
SIP Session 0 0 0 0
Route Session 5 0 0 0
User-Identity 1 0 0 0
Logical Update Queue Information
Cur Max Total
Recv Q: 0 9 1045
Xmit Q: 0 30 10226
ASSA1(config-if)#
ASSA1# sh run
: Saved
ASA Version 8.4(2)
hostname ASSA1
enable password 2KFQnbNIdI.2KYOU encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface GigabitEthernet0
nameif outside
security-level 0
ip address 100.100.100.1 255.255.255.0 standby 100.100.100.2
ospf message-digest-key 20 md5 *****
ospf authentication message-digest
interface GigabitEthernet1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0 standby 192.168.1.2
ospf message-digest-key 20 md5 *****
ospf authentication message-digest
interface GigabitEthernet2
description LAN/STATE Failover Interface
interface GigabitEthernet3
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet4
nameif mgmt
security-level 0
ip address 10.101.50.100 255.255.255.0
interface GigabitEthernet5
shutdown
no nameif
no security-level
no ip address
ftp mode passive
clock timezone SGT 8
access-list OUTSIDE_ACCESS_IN extended permit icmp any any
pager lines 24
logging timestamp
logging console debugging
logging monitor debugging
mtu outside 1500
mtu inside 1500
mtu mgmt 1500
failover
failover lan unit primary
failover lan interface FAILOVER GigabitEthernet2
failover link FAILOVER GigabitEthernet2
failover interface ip FAILOVER 192.168.99.1 255.255.255.0 standby 192.168.99.2
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-715-100.bin
no asdm history enable
arp timeout 14400
access-group OUTSIDE_ACCESS_IN in interface outside
router ospf 10
network 100.100.100.0 255.255.255.0 area 1
network 192.168.1.0 255.255.255.0 area 0
area 0 authentication message-digest
area 1 authentication message-digest
log-adj-changes
default-information originate always
route outside 0.0.0.0 0.0.0.0 100.100.100.254 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
http server enable
http 10.101.50.0 255.255.255.0 mgmt
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet timeout 5
ssh 10.101.50.0 255.255.255.0 mgmt
ssh timeout 5
console timeout 0
tls-proxy maximum-session 10000
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
username cisco password 3USUcOPFUiMCO4Jk encrypted
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
crashinfo save disable
Cryptochecksum:fafd8a885033aeac12a2f682260f57e9
: end
ASSA1#

Best Practices for ASA 5500 Device Monitoring

I have looked high and low and am unable to find anything on this topic. I am hoping that somebody here may be able to share some insight into what are considered the best practices for monitoring ASA's--specifically the 5510 with Sec+ License.
My current monitoring application keeps reporting issues with outbound interface buffers being too high, but there are not any performance issues and I believe the thresholds are just set absurdly low.
Thank you in advance for any assistance.

Hi James,
You probably won't be able to find any all-encompassing documentation for these types of best practices that cover all scenarios. The better method would be to define exactly what items you'd like to monitor and we can provide some guidance on how to best get that working for you.
-Mike

Best practice for interface

Similar Messages

Maybe you are looking for