Best practice to work with Sybase 12.5.3 database version

Hi all,
Is there any document or information about best practices to access a Sybase 12.3 version from universe on BOXIR2?
Thanks.

Hi Marlon,
Have a look to Product Guide of BOXIR2 for [Data access|http://help.sap.com/businessobject/product_guides/boexir2/en/xir2_data_access_guide_en.pdf] see if it helps.:
Regards,
Shweta

Similar Messages

  • Best practices for working with large placed bitmap images?

    Hey all,
    I need some advice on the best way to approach building these files. I've been working on some banners that are very large: 3 x 7 feet.
    Each banner has a simple vector graphic treatment at the top and bottom (rectangle with a different colored rule on top, and vector logo) and a small amount of text, just a URL and a headline.The headline is type (not converted to outlines) and usually has some other effect applied to it, say a drop shadow or outer glow. Under these graphics is a full bleed image. The placed images need to be 150ppi at actual size, so they're honking big, sometimes up to 2GB. Once the layouts are approved, they have to go to a vendor for output.
    The Illustrator docs are really large, and I've read in other threads how to combat that (PDF compatibility, raster settings). But even still, does anyone have any insight into the best way to deal with these things? The dimensions are large, and then the images are large, and it just makes for lots of looking at the spinning ball of death...
    If it were me, I'd build them in InDe, but the vector graphics need to be edited for each one, and I so don't like to do that in InDe unless forced. To me, it's still ultimately a page layout app, not a drawing app. (Old school here.)
    FYI, our machines are all MBPs with 8G ram and the latest Intel Core 2 Duo chips, 2.66 and 2.8GHz. If we keep the files local (as opposed to working on the server) it should be fairly zippy... No?
    Any advice is appreciated, thanks!

    You can get into memory trouble with very large placed pdf files. Tiffs too.
    This has to do with the preview, which contains much more information than you need for working with.
    On the other hand if you place EPSs and take care not to turn on overprint preview you can get away with huge files.
    If you do turn on overprint preview your machine will slow down a lot and the file may become totally unmanageable.
    Compare this with to InDesign where you can control the quality of the preview. A hi-res preview will slow you down and most often you don't need it anyway.
    I was working (in Illie) the other day on much larger files than you mention – displays for whole walls – and had some considerable trouble until I reverted to the old EPS format. They say it's dying but it ain't dead yet .

  • What are some best practices to work with Compressor 3 droplets and new Compressor 4?

    I have purchased Final Cut Pro X / Motion 5 and Compressor 4 from the App Store. My installation of Final Cut Studio 6.0.6 / Motion 3.0.2 / Compressor 3.0.5 has been moved to a new folder "Final Cut Studio". I have started the old version of Motion first as advised in this document.
    I just tried to use my old Compressor 3 droplets and i am able to convert as before.
    I am wondering what I should do now and what the best practices are
    Use the old droplets and stick with Compressor 3?
    Import the droplets to a new location to be able to use them in Compressor 4?
    Recreate new droplets with similar settings within Compressor 4?
    What are the changes I can expect from using Compressor 4?

    I've found that it helps to meet with each person in your new org that you'll be supporting. Start with the Eloqua Admin(s) and ask for an overview of standard reports, naming conventions, folder structure, processes, etc. Make sure to do the same with sales operations, too. If you're moving into an admin role ask for the data dictionary so you can study it to understand how the data maps from front end CMS to MAP to CRM.
    The next phase would be to meet with field marketing and campaign managers. Ask them about current projects, future projects and how you'll support their success with Eloqua.
    And last but certainly not least - process documentation! Ask for all of those things and you'll be rocking and rolling in no time.
    Good luck in your new role!

  • Best practice in working with Adobe forms in multiple languages

    We have to provide access to some Adobe Interactive Forms in both English and French, some of them from Web Dynpro application(s), some of them as callable objects from Guided Procedures.
    1- We know for sure that we can have two copies of each form, one in English and one in French but that implies duplicating the FormCalc and Javascript code behind. 
    2- Another way if to modify in javascript all labels, captions using some javascript i.e. If lang = "E" then "My label" else "Mon étiquette" . It would work but it is not very efficient.
    Is someone here has experience with this type of situation and would be willing to share his experience with me?
    Thanks in advance,

    Hi Benoit,
    For Adobe Forms in multiple language you can use include text solution also . Within this solution you need to add a language parameter in your interface and then retrieve the include text in the language value ( not current language ) . Personnaly i used a lot this solution with Smartforms text .
    Also i used dictionnary text for text linked with data dictionnary element . For this there is standard function module in SAP .
    Anothers way is in the SFP editor you can translate your form as in SAPSCRIPT .
    Hope this help you
    Regard.
    PS : if necessary i can send you a sample form with smartform/Dictionnary text solution.

  • Error while Connecting report Best Practices v1.31 with SAP

    Hello experts,
    I'm facing an issue while trying to connect some of my reports from Best Practices for BI with SAP.
    It only happens when it's about info sets, the other ones that are with SAP tables go smoothly without a problem.
    The most interesting is I have already one of the reports connected to SAP info sets.
    I have already verified the document of steps of creation of additional database that comes with BP pack. They seem ok.
    Here goes what Crystal Reports throws to me after changing the data source to SAP:
    For report "GL Statement" one of the Financial Analysis one which uses InfoSet: /KYK/IS_FIGL_I3:
    - Failed to retrieve data from the database; - click ok then...
    - Database connector error: It wasn't indicated any variant for exercise (something like this after translating) - click ok then
    - Database connector error: RFC_INVALID_HANDLE
    For report "Cost Analysis: Planned vs. Actual Order Costs" one of the Financial Analysis one which uses InfoSet: ZBPBI131_INFO_ODVR and ZBPBI131_INFO_COAS; and also the Query CO_OM_OP_20_Q1:
    - Failed to retrieve data from the database; - click ok then...
    - Database connector error: check class for selections raised errors - click ok then
    - Database connector error: RFC_INVALID_HANDLE
    Obs.: Those "Z" infosets are already created in SAP environment.
    The one that works fine is one of the Purchasing Analysis reports:
    - Purchasing Group Analysis -> InfoSet: /KYK/IS_MCE1
    I'm kind of lost to solve this, because I'm not sure if it can be in the SAP JCO or some parameter that was done wrongly in SAP and I have already check possible solutions for both.
    Thanks in advance,
    Carlos Henrique Matos da Silva - SAP BusinessObjects BI - Brazil.

    I re-checked step 3.2.3 - Uploading Crystal User Roles (transaction PFCG) - of the manual where it talks about CRYSTAL_ENTITLEMENT and CRYSTAL_DESIGNER roles, I noticed in the Authorizations tab that the status was saying it hadn't been generated and I had a yellow sign, so then that was what I did (I generated) as it says in the manual.
    Both statuses are now saying "Authorization profile is generated" and the sign is now green on the tab.
    I had another issue in the User tab (it was yellow as Authorizations one before generating)....all I needed to do to change to green was comparing user (User Comparison button).
    After all that, I tried once more to refresh the Crystal report and I still have the error messages being thrown.
    There's one more issue in one of the tabs of PFCG transaction, it is on the Menu one where it is with a red sign, but there's nothing talking about it in the manual. I just have a folder called "Role menu" without anything in it.
    Can it be the reason why I'm facing errors when connecting the report to SAP infoSets? (remember one of my reports which is connected to an infoSet works good)
    Thanks in advance,
    Carlos Henrique Matos da Silva - SAP BusinessObjects BI - Brazil.

  • Best Practice For Working on Composite In Team

    Hello,
    I would like to know what is the best practice for working on a single composite by mutiple members in a team.
    We have a core services module wherein a single composite contains many services. So, to complete in time, we would like many members to work on it simultaneously.
    In such scenarios, if some one adds a new adapter or some other services, composite.xml changes.
    Saving it would override other member's changes. Also, it is not possible to apply lock simultaneously on the same file through some version control mechanism.
    Please let us know what should be the best practice in such scenarios.
    Thanks-
    Ashish

    You can very well use a version control software with JDev. You may refer -
    http://www.oracle.com/technetwork/articles/soa/jimerson-config-soa-355383.html
    I think without version control mechanism (like subversion) it won't be easy to work in a multi-developer environment. If you really don't have a source and version control mechanism then manual merging will be required which may be error prone and time & effort consuming.
    Regards,
    Anuj

  • Best practices of integration with SAP Netweaver

    Hi All,
    I'm totally new to SAP Netweaver but I have a task to integrate our system with SAP ECC (R/3). We are using SAP Netweaver 6.4. The goal of integration is to provide for user list of available modules (Sales and Distribution, Human Resource, Payroll, etc) and when user selected for example Payroll we need to display list of available BAPIs. In general weare able to create Enterprise Web Service for some BAPI and consume it. But the problem is that everytime when administrator changed BAPI process (for example added new field to Business Object) we need to regenerate wsdl and change our client application. Does Netweaver provide some Web Service which can retrieve list of applications, list of BAPI processes and can retrieve meta data of some BAPI? Something like Partner Web Service interface?
    We are looking for best practices of integration with SAP Netweaver. We are trying to develop something like adapter which will be able to pull data into SAP ECC system is there any generic way to develop this adapter?
    Thanks in advance for your help.
    Yura.

    Hi Yura !!
    As far as I know, this is not possible yet. Using SAP Netweaver XI/PI, although it adds value to the webservice scenario exposing BAPI functionality, it also needs to maintain a refreshed version of the BAPI definition in its repository. Depeding the complexity of the change in the BAPI structure, maybe PI may allow you to continue working without changes.
    Maybe a good practice is not to make too much changes to a production BAPI, instead make a review in development environment, and once it is stable, use it in production. Other good practice is to keep older versions of BAPIs and add the changed ones as new versions to have back-compatibility
    Regards,
    Matias.

  • What is the best way to work with Word documents in The InDesign CS4???

    I work in Microsoft Word 2007 and all my documents have *.doc format.
    What is the best way to work with Word documents in InDesign CS4???
    David Blatner says to avoid copying and pasting text from Word instead of placing it (Ctrl+D).
    How about pasting RTF or Text Document???
    I want to make book's layout in ID CS4 and its main feature is that there is the left page with text and the right - with graphics.
    So, as I understand to place the text on each page I must create for example 70 Word documents and place each item on 70 left pages???
    It loks like wasting time. I sthere another way of making such layout???  What kind????

    It's best to place any text.
    You can have all of your text in one file and use auto-flow to add threaded text frames and pages as required (Hold down the Shift key when you click the loaded text cursor), but it's a little non-standard to have the thread only on one side of the spread from the auto-flow perspective, so you'll have to set up properly.
    This is one case where a master text frame will work to your advantage. On your master page spread, add a text frame to the left page, but not to the right (or at least not threaded to one on the right -- for some other project you might actually want two independent text threads). Hold the loaded cursor over a frame on the left side of a document page and auto-flow. ID will add new spreads as necessary, but only put the text on the left side.
    Peter

  • Best way to work with interlaced and progressive clips in the same timeline

    I´m shooting with Sony MC-50E camera in 1920x1080, 50i. When importing with Log & Transfer I can work with ProRes 422 files in interlaced mode. I have to mix the footage with video screencapture which is progressive (ProRes 422). The final videos are for web only so it should end up as progressive H264 videos. I´m getting good result if exporting to H264, 1024x576 with deinterlacing enabled, but exporting to full HD gives typical interlaced lines in the picture. How can I avoid this and what is the best solution for working with both interlaced and progressive clips?

    Deinterlace in Compressor using Frame Controls, Best settings. You can reconnect the deinterlaced files to your project, if you've already edited, but you may need to copy and paste the clips in your sequence to a new 25p timeline, then Remove Attributes, Basic Motion.
    When you're ready to export your sequence, use Quicktime Movie, Current Settings, Self-contained. Take that file to Compressor to transcode back to h.264.
    The Apple T.V. preset is very good.

  • Best practice for dealing with Recordsets

    Hi all,
    I'm wondering what is best practice for dealing with data retrieved via JDBC as Recordsets without involving third part products such as Hibernate etc. I've been told to NOT use RecordSets throughout in my applications since they are taking up resources and are expensive. I'm wondering which collection type is best to convert RecordSets into. The apps I'm building are webbased using JSPs as presentation layer, beans and servlets.
    Many thanks
    Erik

    There is no requirement that DAO's have a direct mapping to Database Tables. One of the advantages of the DAO pattern is that the business layer isn't directly aware of the persistence layer. If the joined data is used in the business code as if it were an unnormalized table, then you might want to provide a DAO for the joined data. If the joined data provides a subsiduray object within some particular object, you might add the access method to the DAO for the outer object.
    eg:
    In a user permissioning system where:
    1 user has many userRoles
    1 role has many userRoles
    1 role has many rolePermissions
    1 permission has many rolePermissions
    ie. there is a many to many relationship between users and roles, and between roles and permissions.
    The administrator needs to be able to add and delete permissions for roles and roles for users, so the crud for the rolePermissions table is probably most useful in the RoleDAO, and the crud for the userRoles table in the UserDAO. DOA's also can call each other.
    During operation the system needs to be able to get all permissions for a user at login, so the UserDAO should provide a readPermissions method that does a rather complex join across the user, userRole, rolePermission and permission tables..
    Note that f the system I just described were done with LDAP, a Hierarchical database or an Object database, the userRoles and rolePermissions tables wouldn't even exist, these are RDBMS artifacts since relational databases don't understand many to many relationships. This is good reason to avoid providing DAO's that give access to those tables.

  • What is the best way to work with AVCHD 720 24p footage in FCE4.1?

    Hi I have a Panasonic HMC-150 and I've been shooting 720 24p footage at 21 mbps transfer rate.
    I was wondering what is the best way to work with this material in FCE 4.1? I see that in the easy set up menu they only have the option of 1440X1080i at 50 or 60 fps or 1920X1080i at 50 or 60 fps.
    Also in the rates drop down menu there is only 50 or 29.97.
    So I was wondering which is the best choice for 720 24p footage and will it look alright in any of them? Also is it possible to customize these settings?
    And finally can you work with faster transfer rates (21mbps) in FCE?

    Yikes, this is going to be tricky since FCE does not support native 24p editing.
    The work around for some of us is that AVCHD material that is 24p is often recorded to disc at 60i using telecine, in which case it can be editing at 29.97 frames per second, and then detelecined afterward for final export at 23.98 fps. The problem is that I think your camera actually records real 24p - not 24p packed into 60i. When you import the material from the camera what does QuickTime report the framerate as?

  • What is the best way to work with mixed media in 1080 timeline?

    Hi there,
    I have a project shot mostly in 1080 24p but a bit of 720 24p and 4x3 30p footage.
    What is the best way to work with this mixed media?
    Thanks!
    Steven

    Hi Shane,
    Ok just to recap (thanks for being patient by the way)...I have put some questions in here...feel free to write in caps to respond and we'll put this baby to rest!
    1) I will work in a 1080p FCP sequence, correct?
    2) HD 1080p footage captured as applepro res hq I will leave as is and work with?
    3) HD 720p footage which was captured as applepro res hq. Can I just drop in 1080 timeline and let FCP do its work? Or should i run through compressor, if so what setting shall I submit it too?
    4) I dont have a budget for an external hardware to convert SD to HD...should I capture my SD Beta through Final Cut and just leave and let FCP do its work? Or should I run through compressor? If so what setting shall I submit it too?
    5) For for my master sequence in FCP am I not using an I-Frame format apple pro res if I am using my apple pro res hq 1080 footage as my formatted sequence? I am not sure what you mean by GOP?
    6) I also found some 60p footage 1080p XDCAM compressor shot with the same XDCAM camera. I put in the 1080p 24p timeline but it was pretty choppy...any ideas of this conform?
    Thanks very much for all your help it has gone along way,
    Steven
    Saying what CODECS you are working with was my question. 1080, 720, 4:3...really says nothing. There are a dozen 1080 codecs, another dozen 720 codecs, and nearly 100 4:3 formats.
    Best to capture all the footage to one uniform codec.
    Second best is to work with one format and let FCP conform the rest to that...IF and only IF that format is an I-Frame format like ProRes. GOP formats as master sequence formats cause TONS of issues.
    What I'd do is work 1080 ProRes, just add the 720p footage (Use Compressor to convert it if you didn't have a lot, but if you had a lot, just add it), but I'd capture all the SD 4:3 footage via a Kona 3 or Matrox MXO2 as 1080 ProRes. Hardware conversion of SD to HD is much better than anything FCP can do. AE might do good as well. But then use Compressor to convert 29.97 footage captured (you can't convert 29.97 to 23.98 when you capture) to get to 23.98.

  • Best practice to deal with computer or departed employee

    Dear All,
        I would like to inquire about the best practice to deal with computer and computer account of a departed employee. should be disabled, reset, deleted, or just kept as it is until it is needed by another user?
    Regards
    hiam
    Hiam

    Ultimately your needs for their identities and equipment after they leave are what dictate how you should design this policy.
    First off, I recommend disabling the account immediatly following the employee's departure. This prevents the user from using their credentials to log on again. Personally I have a "Disabled Users" OU in Active Directory. When I disable accounts
    I move them here for easy future retrieval.
    It is possible the user may return, or if they have access to certain systems you may need the account again. I would keep the accounts for a specific amount of time (e.g. 6 months, but this depends on your needs) and then delete them after this period of
    time.
    If the employee knows the passwords to any shared accounts (not a good idea though many organizations have these) or has accounts in other systems that do not use Active Directory authentication, immediately change the passwords to these accounts again following
    the employee's departure.
    If the employee had administrative access to their computer (not a good idea, though is the reality in most cases) you should disable the computer account and remove it from the network. This will prevent the employee from remotely accessing the machine
    until you are able to rebuild or inspect it for unapproved changes.
    Ask the user's manager, team members, and subordinates if there are any files that the employee would have stored on their computer. Back these up as necessary.
    Most likely you will reuse the computer for another employee. For best results you should use an image so you can re-image their machine and not have to worry whether they had installed any unwanted software (backdoors, viruses, illegal software, etc).
    Hope this helps.
    Jason Warren
    @jaspnwarren
    jasonwarren.ca
    habaneroconsulting.com/Insights

  • What´s the best approach to work with Excel, csv files

    Hi gurus. I got a question for you. According to your experience what's the best approach to work with Excel or csv files that have to be uploaded through DataServices to you datawarehouse.
    Let's say your end-user, who is not a programmer, creates a group of 4 excel files with different calculations in a monthly basis, so they can generate a set of reports from their datawarehouse once the files have been uploaded to tables in your DWH. The calculations vary from month to month. The user doesn't have a front-end to upload the excel files directly to Data Services. The end user needs to keep a track of which person uploaded the files for a determined month.
    1. The end user should place their 4 excel files in a shared directory that will be seen by DataServices.
    2. DataServices will execute certain scheduled job that will read the four files and upload them to the Datawarehouse at a determined time, lets say at 9:00pm.
    It makes me wonder... what happens if the user needs to present their reports immediately so they can´t wait until 9:00pm.  Is it possible for the end user to execute some kind of action (out of the DataServices Environment) so DataServices "could know" that it has to process those files right now, instead of waiting for the night schedule?
    Is there a way that DS will track who was the person who uploaded those files?
    Would it be better to build a front-end for the end user so they can upload their four files directlyto the datawarehouse?
    Waiting for your comments to resolve this dilemma
    Best Regards
    Erika

    Hi,
    There are functions in DS that captures the input files automatically. You could use file_exists() or wait_for_file() option to do that. Schedule the job to run every certain minute and if the file exists then run. This could be done by using a certain file name with date and timestamp etc or after running move the old files to archive and DS wait for new files to show up.
    Check this - Selective Reading and Postprocessing - Enterprise Information Management - SCN Wiki
    Hope this helps.
    Arun

  • When I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please

    when I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please

    Ive got the same problem, just got my iphone unlocked, and they told me to sync it to itunes to get it permently unlocked, well everytime i plug my iphone in it says; it wont work as it needs up dating to 10.6.3, which i have already updated, but still doesnt work, so how can i get my phone unlocked?

Maybe you are looking for