Best video widescreen size to work in standard iDVD

Hi!
My problem is this: iDVD make 16/9 DVD in that size: 720x404. If you think this is incorrect, please tell me. I import my Mini DVD in way to work with them in iMovie HD'06, and the final extraction size, made with MPEG Streamclip, in "dv", is 853x480, 16/9. In iMovie 06, I choose "Large Screen", and everything is ok. But when I finalize and check what is the size of the screen on the DVD, made by iDVD, the size is 720x404, 16/9.
Is it possible to keep native video size, here, 853x480, or do I need to work like iDVD do, and be satisfied with 720x404 16/9 size?

I have used ffMpegX in the past. http://www.ffmpegx.com

Similar Messages

What is the best video format/size for the iPad Air?

I'm using Xillisoft Ultimate Video Converter. I'd like to know what format/type to use for best quality. It has different iPad profiles. I'd just like to know which would be best.
Thanks!

Hi Rod,
That link is from the Captivate help file:
You could also find this documented in the help file link:
http://helpx.adobe.com/pdf/captivate_reference.pdf
Look under the topic "Unsupported objects in HTML5 output".
Thanks!

Working with HD m2ts files to get best video out burned on disk.

Working with m2ts video files, how to get best video output. I have Pinnacle 12U and the video picture that is produced on a burned disk is much better then what is produced in Adobe Premieme PRO CS4. I would like to continue to use Premieme Pro, but unless I can archive at least the same quality of video it would be hard to make the switch. I must be missing something??? HELP!!

More input, the media file output is VTS.VOB format from Adobe and from Pinnacle it is m2ts. When you stop the playback m2ts is real sharp and the the VOB is not as clear. During the playback the m2ts disk is so much better than the Adobe VOB format.
Does anyone know if this is the best format that Adobe can produce? It's a shame that with the great High Definition picture that you can now get out of a personal movie camera, that Adobe cannot produce the same quality picture out on disk!!

Best Video Card for non 3d/compositing work in Premiere CS4?

Hi all, I'm looking to optimize my system where I can to speed up the editing process. I edit 1080p footage from the Canon 5D MKII (h.264 MOV files)using half-res h.264 proxies, but CS4 seems to hang a lot in the timeline view and clips just disappear and instead show green. I'm switching to half-res MPEG-2 (.m2v) proxies now and so far that problem seems to have gone away (still testing), but when timeline display quality is at "High Quality" (vs. automatic) there's still some chop during slow pans (not seen with "Automatic" or "Draft Quality").
Anyway, I'm looking for the weakest point in my system and suspect the video card. My system is an 2.66 i7 processor, 6GB 1333 ram, 1x160GB sata II HD (OS/Apps), 3x1TB SATA II RAID 0 (paging file, data), and an $80 ATI 4650 512 MB video card running Vista 64.
So all that said, what's the best general graphics card for editing HD video in Premiere CS4? I don't care about 3d or compositing at this stage, just basic editing of unrendered (timeline playback) HD video, maybe sometimes 1-3 HD layers, some basic color correction effects (b+w, contrast, etc), dissolves, text overlay, some clip speed manipulation.
Many seem to recommend the Nvidia quadro cards, but I haven't found any information to suggest they help with anything other than 3D/compositing, which I don't need (and therefore don't need to pay the premium).
There's also the Nvidia CX card, but it's main feature is touted as encoding h.264, whereas I could care less about that and ideally need decoding of h.264 in the timeline to be better. I haven't seen any great reviews on this card of heard of average user testimonials, probably because it's $2k and it mainly marketed as "zoom more fluidly in photoshop, export h.264 4x faster", which seem like minor issues vs. "better realtime playback of HD video".
I sort of rambled, but if any informed CS4 users can help answer the question regarding the best video card for general CS4 editing use (not 3d/compositing stuff) I'd love to get more insight.

So in Media Encoder CS4, I tried encoding one of the clips that plays back the least smooth in the Premiere timeline (a slow pan across intricate patterns on a sand dune in death valley) to the following:
Format: P2 Movie, Preset: DVCPRO HD 720P 30
(this was the only format in media encoder that mentions DVCPRO HD)
I noticed when trying to customize the setting, that there is no 30 fps option, just 23.976, 29.97, and 59.94. I just went with 29.97 as that was the closest to the 30 fps of the source MK II footage. The width and height were also unajustable at 960x720 for the DVCPRO HD format.
Playing the output in the timeline view of Premiere was comparable in smoothness to the m2v file. I looked at my resource monitor during playback looking for bottlenecks, and the CPU does seem to spike at 100% initially when playing this clip back. I reverted to the m2v version and also saw the same CPU spike. I also reverted back to the down-res'd mp4 version, same spike. Moving display quality down to draft does allow for smooth playback here.
So I guess there's something about this clip that is CPU intensive to play back in the timeline in any of these formats. The original 1080p version plays back perfectly in both quicktime and VLC player.
Anyway, for now I think I'm content with using the m2v proxies as a big chunk of the clips are fairly smooth, and using a reduced quality display mode for clips that don't play as smoothly is accpeptable for now. At least so far I'm not seeing the hanging/video not displaying (and instead showing a green screen) that I was with the mp4 proxies.
If anyone has any other suggestions as to how to get smoother timeline playback for these proxies (or the original h.264 .MOV files), however, whether it be a hardware upgrade (e.g. better video card) or a different proxy codec, I'd love to hear them and give it a shot.

Best video format to encode for playback on iBook G4 1.2GHz?

I have been scratching my head for a week on this. What is the best video format that is highest quality and will playback smoothly on my iBook g4 and my iPhone 4? It has 1.25GB of RAM and I upgraded the HD to a WD 250GB 5400 RPM IDE drive 2 years ago and it's running dual boot Leopard 10.5.8 and Tiger 10.4.11 (keeping Tiger for Classic Mode).
I have a very large HD video collection consisting of 720p HD DVDs and 1080p Bluray discs that I have already spent a year to convert to MKV and MP4 files for storage on my media server. They have all been ripped and encoded with H264 using Handbrake. The average 720p movie is about 4.5GB and the average 1080p movies run about 8GB. I have over 100 movies stored on my media server and they playback fine on all my computers. They work fine on all my Windows 7 systems, they even play fine on my G5 2.0GHz DC late 2005 Powermac with 8.5GB Ram and the NVidia 7800GT.
Most of my 720p files can be reduced in size and or quality to 1-2GB and are playable on my iPhone 4, iPad 2 and even my little Acer Aspire One netbook in m4v or mp4 format.
I know my iBook is out of date, but no matter what compression method I have tried, the only thing it can play is MPEG-2 encoded media. And it cannot handle any h264 video I make, even at 480p settings using the simple profile. Since MPEG-2 takes 4-8GB per movie, this is a huge waste of HD space. And if I encode my movies like the old iPod video size, it looks like crap in full screen. I really want to store about 20 movies on this iBook for playback when I travel since I have 2 extra batteries. I need to movies to playback on the iBook and be able to transfer them to my iPhone 4 or iPad at any time.
Is there any method for getting 480p to encode and playback well on this iBook without making it look like crap or using the old DivX avi standard? If I have to reduce all my movies for playback on the iBook, I don't want to go lower than 480p because I want the same conversions to work on my iPhone 4 as well with decent quality. It is redundant to keep making copies of each movie for each device. Anyone have any suggestions? I don't want to take my little netbook around with me because the screen is too small and there is no opticle drive.
If anyone has any ideas, please post which Handbrake profile or other that can work... or let me know if my iBook is just garbage now. Thanks!

I am not asking you how to rip a DVD. I am asking how to convert any video file for decent playback on my iBook or iPhone!
This feature is available in iTunes so you can convert your DVDs to iPod playable formats. But when iTunes or Handbrake (or even Apple Compressor) convert anything, even my own videos made with Final Cut and iMovie, they will play on any iDevice other than my iBook unless I use the lowest most terrible video format.
I am just trying to figure out the proper video format the iBook can play. I am not ripping the DVD's right now... did that years ago anyways (and half of the videos I want to convert I made with iMovie during my travels in China and Hong Kong... I am just trying to play movies I already own on an older iDevice... my iBook. Converting purchased videos and home made videos is in no way illegal.
You misunderstand what I am asking. I am not trying to break digital copyright. If this is breaking digital copyright, then why does iTunes allow me to convert the movies for my iPhone 4 in the first place? You are telling me if I didn't purchase the movie from Apple I cannot watch it on my iPhone and iBook? That is not right.
I just want to know what the proper video playback requirements are for the iBook hardware. Plain and simple. If it is illegal in any way to tell me how to do it, just tell me what video my iBook supports. Apple tells me what video my iPhone supports ie. 1280x720p @ 29fps.... blah blah blah. Seems so far the iBook can only play a DVD MPEG-2 stream and no advanced codecs like h263 or h264. I just want to know what format the iBook can handle.
I have exported movies from iTunes and of my time in Hong Kong from iMovie and I cannot get them to play on the iBook at all if they are even 480p. So I just need to know what the max video playback is. If it can only play 320x240 or something, it is completely useless. I remember years ago when I bought the iBook, it did play the sample h263 and h264 videos that Apple had on their website (some of them 480p-720p)... but today it seems it can't play anything but 320x240 or less without getting locked up. I know the HD video requirements are G5 or higher... but we are talking DVD size cannot play in h264 mp4 formats, only MPEG-2 formats. This makes no sense? So I need to know the exact maximum resolution, framerate and codec this iBook 1.2 GHz can handle.
Don't tell my watching movies on my iBook, even the ones I made is illegal.

Video camera for greenscreen work +

Hi. I'm going to be setting up an in-home studio for a weekly, 1 hour show (to be viewed on the internet, not sure if could ever get it onto public access stations but might like the option).
The studio will be 20' long by 16' wide (probably minus a carveout for a bathroom) - but will retain a 20' length for filming.
For noise control, planning to hang heavy black curtains on the sides and camera end, add some carpeting, and possibly some simple / inexpensive treatment on ceiling as well. Will either paint back wall green or get some chromakey material to shoot against. WIll have a desk with 1-4 people for the show, positioned 6-8 feet from the greenscreen, and the camera on the other end (roughly 12 feet away)
I'm trying to keep the cost as low as possible, but would like it to be a step up from my $200ish consumer camcorders (a JVC Everio and a Canon HV20), so I've been looking at some used Prosumer or Professional Video Cameras that would allow me to capture the 4:2:2 colorspace I want to do for improved Chroma Keys. (I have Adobe Master Suite CS6 and will be doing my work in After Effects and Premiere)
We have a Sony DSLR A200 which came with a couple of lenses, but don't have any additional lenses beyond that (or much camera experience - so all sugestions welcome).
Cameras I've considered include
Sony HVR-V1U which I can get locally for about $1000 or less; one just sold on Ebay for $800ish - I'm a bit reluctant to make that big of a purchase there, but might consider it if a well established seller / store - B&H suggested this camera didn't give you 'true' 4:2:2 colorspace via HDMI; Sony said it did give you the colorspace, what was lacking in these earlier models (or hmdi ports maybe) was ability to transmit full intensity data (for brightness)
Think I might need to buy an HDMI Capturing device to get the 4:2:2 signal - Atomos Ninja 2 runs just under $700, lets you record directly to Hard Drives so fairly inexpensive option for massive storage; Have also seen a variety of products from Blackmagic (Intensity Pro - and Hyperdeck Shuttle - ranging from $150ish-$350ish)
Canon XF100 is newer, seems to be a superior camera. Records onto generic Compact Flash cards (which could help limit expense and make for easy editing); and meets 'broadcast standards' of 50Mbps at full HD, and might not need external HDMI capture - saw these at B&H for between $2000 used, $2500 new; Currently listed for $2100 at 42nd Street Photo.com - which looks legitimate as best I can tell.
Heard BlackMagic Pocket Cinema Camera mentioned as well - much cheaper, roughly $1000 for new - but seemed like those might need a variety ofa dd o (dont know if compatible with my Sony lenses) - and require fast (expensive) SD cards
Would welcome any advice about good video camera for greenscreen work - along with any experience on the Atomos Ninja 2 or Blackmagic products retailed above (and any tidbits on setting up audio/video studio; will be recording some music in there as well)
Thanks

It's a trade-off ... which is to say, it's like Life in general, right?
That many people that close-in is gonna be awful tight. Two people, ok ... three pushing it ... four is gonna work you some. Getting talent any farther away from the background given the limited distance the camera can move is not likely, without getting too wide a view from the cam exposing off-screen areas.
As to the screen blending into the floor ... you can affix the front edge out from the wall such as to get a curved shape that can visually blend wall into floor, you need a good two-feet radius to pull it off though. And if someone steps back, um ... yea, screens and photog's background paper can easily get a fresh new hole in them.
The "cove" backdrop support is a common commercial photographers tool ... needs to have at least a two-foot radius to be able to blend it visually from floor into wall. Often made by cutting 1/4" ply into 4-foot squares, then drawing a circle on them with a 2-foot radius, cutting out with a jig saw ... resulting in four corner sections that will be used for building the cove itself. Each with that radius of a circle cut out of it. Screw some small wood blocks onto the straight sides, using these blocks to fasten the cove-form sections to the wall and floor, then maybe three blocks flush with the edges of the cove one in the middle of the arc, then equidistant each side from there. Measure from an inch or two off the cove form onto the floor up flush with the bend of the cove and an inch or two past the cove-form up the wall. Cut a strip of 1/4" ply or masonry board or whatnot (some short of thin bendable but tough sheet good) that fits this dimension, push them tight to the form and screw through the sheets into the woodblocks on the cove forms.
Then your screen material can just drap over it and you won't step through it. We built one for our studio, it's 12 foot wide, works great ... and put two layers of 1/4" ply over it, the first stopping just at the edge of the cove form, the other going past that another inche and a half or so.

How do you know the best iMac display size

how do you know the best iMac display size
Only on them fits in the screen window and that makes the font so tiny. The others are too wide or too tall. I usually view at 150 - 200% for vision issues.

You say it's better to do the Media Browser? I'm fairly new to movie, dvd and garage band. How would I go about using the Media Browser instead of straight to iDVD?
Select Your project - go up to Share - Share to Media Browser and as Large (Not HD)
In iDVD select a nice theme - click on Media button - click on Movie - Select Your movie.
NOW - Save as a DiskImage - and test this before burning DVDs - if this Plays OK then either burn the Image by using Disk Util tool (and set down burn-speed to x4) - or burn via iDVD (will take more time)
I want to keep as much quality as I can.
Then don't use iMovie'08 or 09 or 11 - as they all discard every second line resulting in less quality on the DVD. I use iMovie HD6 or FinalCut any version.
Also...I tried to split my project in iMovie...but couldn't find a way. I wound up just making a copy and then deleting out a handful of scenes from the copy...I still have the original at 4:12hrs. Is there a way in iMovie to split a project?
I would make a copy and cut away a bit from the end - calling this Part 1 and from start of the other copy Part 2.
OR - there are other programs that can squees in more to a DVD e.g. Roxio Toast™ - BUT this has two cons.
• It costs - to me it was well spent mony as it can so much more e.g. back engineer a DVD to an editable form
• Squeesing in more on a DVD - costs in QUALITY - and as You want as much as it can be - then 90 minuts portions encoded with Pro-Quality encoding and full quality interlasced material from a video-editor that delivers this is the way to get 100% of what DVDs can do.
DVD is as standard only SD-Video - HD not possibly. Then You need Blu-Ray. (also Roxio Toast™)
Yours Bengt W

Video Podcast Size/Length Limit for iPhone?

Hi;
I have subscribed to the "Programming Paradigms" video podcast from Stanford University available through iTunes freely [1].
The lesson's download to the Mac fine and play on it, but when i sync them to my 1st generation iPhone (v2.1) only the first episode works as expected and other lessons plays without a video (only audio).
I realize first lesson's length is smaller (17 min. versus 40+ min.) than others, is there a video podcast size or time limit for iPhone exists and if so how can i bypass these limits?
[1] http://deimos3.apple.com/WebObjects/Core.woa/Browse/itunes.stanford.edu.16173481 11.01617348114
Thanks,

The standard itself doesn't have these limitations, but each "device" may have it's own limitations that you need to be wary of. For example, I can encode an .mp4 video file that will play back fine on a Playstation 3, but, due to it's bitrate, will not play back on an iPod.
However, any app on a computer that is listed as being able to playback MPEG-4 content will recognize it as such and play it back.

Best Video Settings For The iPad.

Hi everyone,
Does anyone know this ? "Best Video Settings For The iPad".
Kindly and in simple terms state the best possible settings to be use when converting videos for the iPad that optimizes the entire screen size/ area without a black borderline around your video. it's rather frustrating to have many technical jargons online without anyone giving real pointers at real values in conversion settings.
Thanks in anticipation.

Kindly and in simple terms state the best possible settings to be use when converting videos for the iPad that optimizes the entire screen size/ area without a black borderline around your video.
It is impossible to answer your question without knowing both the aspect ratio of the source file and your personal preferences for displaying it on a 4:3 iPad screen.
Basically, you have two options here when converting files of one aspect ratio for display on a screen of another aspect. You can distort the original display to "fill" the ipad screen. (E.g., you can make a widescreen movie exactly fill your iPad screen but then people and objects will look tall and skinny.) The other option is to convert at the original aspect ratio and simply use the iPad "zoom" option to force your widescreen movie to fill your 4:3 screen by scaling the height of your movie to fill the screen and allowing the left and right edges of you movie to be cropped from your view. You have no other choices here other than living with the defaulted black areas.

What is the best video converter for high quality MPEG-4 for Apple TV?

What is the best video converter for high quality MPEG-4 for Apple TV?

Handbrake won't convert AVI files, But there are many more than those mentioned that will
The choice of conversion software is a personal choice, I have around a dozen applications that will tackle AVI's, however VisualHub is not one of them, not because there is anything wrong with it but rather I have enough such applications in my arsenal already.
I would use mpegstreamclip in most scenarios for what you are wanting to do but maybe not always. It is a good idea to have a few applications to choose from as not all do the same thing. mpegstreamclip has a few more options than some bog standard applications without becoming overburdening with choices.
You might want to try a few applications yourself before deciding on the software for you. isquint is a free limited version of visualhub, you might want to give that a whirl to get a feeling for visualhub.
Be aware though that quality conversions do not happen quickly, claims of being faster than other applications may well be correct, but are usually a trade off against quality. Again you need to choose your software to reflect your preferred balance between speed and quality.
Here's how I use mpegstreamclip, http://web.me.com/gartside1104/z008/Mpegstreamclip.html but your AVI's may well be low quality, you shouldn't set the bitrate any higher than your source file and likely lower, you shouldn't increase the frame size either.
Message was edited by: Winston Churchill

Installed Premiere Pro CS4 but video display does not work?

I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
Ron

I would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2

Satellite 1800-100: video-out does not work

He,
I just installed windows XP on my old Satellite 1800-100, but now my video-out does not work anymore. So I just downloaded the latest driver, but there's no way I can get it installed. According to Windows the new driver isn't newer, so it won't let me update it. And when i try to unistall the display driver, I have to reboot before it takes effect, and wile rebooting it automaticly installs the standard driver again.
Can anybody help me?
Greets,
Daan

Hi
Do you mean TV- out port or monitor port? As far as I know this unit is preinstalled with WXP Home and all drivers can be also used for WXP Pro.
Did you preinstall your own OS (non recovery image)?

I have an older Power Mac G5 Quad, and my video card just went out. I am trying to find a video card that will work for my Power Mac. I have duel screens but I can't seem to find the appropriate video card

I have an older Power Mac G5 Quad, and my video card just went out. I am trying to find a video card that will work for my Power Mac. I have duel screens but I can't seem to find the appropriate video card. The serial number on my computer is: RM620603R6W. Apple won't help me because the computer is older than suggested. Please give me the exact video card that will work best for my computer.

Hi Mike, make sure the card has Mac ROM, or is a PC card with Mac ROMs flashed to it...
G5 PCIe options are listed here:
http://www.jcsenterprises.com/Japamacs_Page/Blog/71BBF3EF-9713-4C53-8B80-26771F8 A4087.html

How to make best videos/audios for Creative Zen/Zen Vision W/Zen Vision M/Z

4Easysoft Creative Zen Video Converter is an all-in-one Video Converter for Creative Zen software with high output quality and powerful video editing functions, which can help all the zen users to make the best video/audio effect.
First of all, let’s make clear what kinds of videos/audios can get the best effect in the zen players.
Video:
MPEG, WMV, and AVI (MPEG-4 SP, DivX, Xvid), while MPEG-1, and MPEG-2 are supported, but must be transcoded with the included software.
Audio:
MP3, AAC, WMA, WAV, and Audible 2, 3, and 4 formats.
Settings:
Video resolution: 320×240; Video Bitrate: 500 kbps; Audio Bitrate: between 96 to 128 kbps.
Then, let me show you how to make a full use of this powerful converter.
Preparation:Download and install 4Easysoft Creative Zen Video Converter
http://www.4easysoft.com/guide/creative-zen-video-converter/main.jpg
Step 1: Run this software and add video/audio files.
Step 2: Select output video format from the profile drop-down list.
Click the “Profile” button to select the output video format from the drop-down list button.
Step 3: Customize output settings.
Click “Settings” button in the output settings area, you are allowed to customize the output parameters, specify output folder and select output format.
Step 4: Start conversion
Click “Start” button on right bottom of the main interface, you can begin the conversion. All the tasks of conversion will be finished at fast speed and high output quality.
http://www.4easysoft.com/guide/creative-zen-video-converter/steps.jpg
Tips on editing videos:
1: Capture your favorite picture.
Just click the “Snapshot” button to save your favorite image.
2: Merge videos into one file.
Just check the “merge into one file” option if you want to merge the selected contents into one file As default the merged file is named after the first selected file (either a title or a chapter)
3: Select preference
Click the “Preference” button and a dialog pops up, you can select the output destination, the Snapshot foler, the format of the snapshot image. You can also choose to shut down your computer or do nothing after your conversion. You can also select the CPU usage.
4: Trim video
You can get any clip of your video and put it on your zen.
5: Crop video
You can crop your video by selecting your video mode, setting crop values, or drag the frame.
http://www.4easysoft.com/guide/creative-zen-video-converter/tips.jpg
Ok, just enjoy movies and music with your Creative Zen player now!
More useful tools:
MP4 Converter is a powerful MP4 Video Converter which is designed to convert almost any video formats to MPEG-4 standard formats; WMV Converter provides perfect solution to convert common video formats to WMV with the best quality of picture and sound; Apple TV Video Converter is the excellent Apple TV converter software to convert all video files such as AVI, MPEG, WMV, MP4, MOV, RM, ASF, 3GP, VOB, etc, to Apple TV movies.
Edited by: user11254370 on 2009-6-9 下午11:58

Just wanted to mention - I bought the IR Remote thinking to make the player useful without navigation keys. Now I feel like I wasted more money instead of shifting to some other player by some other company with better customer service.

Can't get widescreen monitor to work right.

I can't get my widescreen monitor too work right.
It should be at 1360x768 res but it is at 1024x768.
I'm using a mac mini.
My monitor is manufactured by LG, it is a flatron. xrandr -q gives
Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1024 x 768
default connected 1024x768+0+0 0mm x 0mm
1024x768 0.0*
800x600 0.0
640x480 0.0
I'm sorry if this is a noobie issue, I wouldn't know. I hope someone will please help me. thank you.

Is your video driver right for your system? Which driver are you using right now?

Best video widescreen size to work in standard iDVD

Similar Messages

Maybe you are looking for