Best way to resize a graphic for slideshow

Just a small issue I'm sure, but I'm trying to figure out the best way to handle this. I have a slide show set up with photos of various sizes. Some of the shots are landscape and the others portrait. I have a custom shadow I want at the bottom of each photo. However, if I just put it on the page, it doesn't have anyway to resize based on the photo. Is there a way around this?

The sample that you posted is not grayscale so it is no surprise that you are having trouble scaling it to the desired dimensions. Try changing the color mode to grayscale first, then scale the image, then save for web as a GIF file - - - reducing the color palette to the least number of grays needed to display the image.

Similar Messages

Best way to create customized counter for slideshow.

Hello everone. I am stuck on this one. What is the best way to create a customizable for the slideshow widgets. Im looking to create circles or boxes that change color in relation to the picture in the slideshow. I am sure that I have seen it on a muse site before, but just can't figure how to get it done. Thanks!

Have you tried using:
Effect > Text > Numbers ?
You could also have found that answer by searching for "numbers" at the Community Help site. It's really a great resource in addition to the online help files. Try it out!
(It would have been the first result returned from the search...)
http://www.adobe.com/support/aftereffects/

What is the best way to resize a clip

What is the best way to resize a clip? I have some clips in 1280x720p and a B camera shot of the same person that was shot at 1440x1080p and I want to multi-edit them so they need to be the same size. Is there a way inside FCP to re-interpret the 1440x1080 to 1280x720 or do I have to Export them as smaller clips and re-import them? Just have a lot of clips so would be good to find a internal FCP way of doing it.

Well Zeb, again with the insults. If you had just stated simply "What codec" are you using that would have been fine. But instead you decided to insult me and assume I knew nothing.
FYI I started working with video in 1985 and was one of the first to use Digital Video in 1991 as a Software Developer. So I can assure you I know a lot about codecs and NLE having even written one once. One of the things I learned in IT was to always ask for the best route through a problem from the experts around you before wasting valuable time and money finding your own, and usually the dead-ends at that!
So there you go, next time I'll mention the codec and next time if you could be more polite then things will progress more smothely on here

Advice on best way to setup Disaster Recovery for SOA Suite 10.1.3.4

Hi Everyone,
I need some advice on the best way to setup Disaster Recovery for a SOA Suite 10.1.3.4 install deploying JSF/ADF OC4J applications.
The way we are trying to do it at the moment is manually copy the "applications" and "applications-deployments" folders for the OC4J application on the production server, then compress and ship the files across to the DR application server nightly. (We don't require high availability).
In the event of a disaster we then extract the files and copy to the OC4J instance (pre-created and configured) on the DR server. Unfortunately to date we haven't been able to reliably setup a DR application (seem to mostly get 404 errors etc), even though the OC4J application has its connection pool resolved to the DR database and is showing as "up" in the ASConsole.
My question is, is there a more "native" way to do what we are trying to do. We do not have Enterprise version of SOA Suite or 11g database so any advanced recovery features are not an option. The setup is also stand alone, i.e. we are not using clustering or RAC etc.
Any ideas would be really helpful.
Thanks,
Leigh.
PS we are also running the production apps server with Oracle Application server 10g 10.1.2.3.0 as the HTTP apache server (with Forms, Reports and Discoverer deployed) and the SOA Suite 10.1.3 applications use the 10.1.2 HTTP server via the HTTP to AJP bridge. So the 10.1.3 OC4J instance is configured to use AJP on port range 12501 - 12600.

For enterprise solutions, AS Guard would work.
http://download.oracle.com/docs/cd/B25221_04/core.1013/b15977/disasrecov.htm#sthref303
However, since advanced recovery options are not available (as you said), then what you are doing should not be too bad.
AMN

Best Way to Define Employee Numbering For Different Countries

HI all
I am working on for a project which will be for Multiple countries.But Each country has different Instances.Now the questions is What could be the Best way to Define Employee numbering for all the Regions ? As for as My knowledge goes It would be Number prefixed by Country.Then How we can have Alpha numeric in employee Coding ? We need to have Fast Formula to Ahieve this task.If any body has come across this scenario please share your thoughts .Any thoughts are greatly Appreciated.
Cheers
Kumar cs

If you have each country on a different instance and you want employees to retain their employee number on transfer between countries, I believe you have two options:
i) Use manual numbering. One recent change to the system is that you can update the numbering profile from Auto to Manual and back to Auto again. So you could potentially leverage this manual workaround when a cross BG transfer happens.
ii) Bespoke module to export all emp numbers into a 'central repository', e.g., flat file, that can be accessed by all instances, imported regularly and then referenced by your Fast Formula. You would also need processing to determine when a person is a transfer from another BG or a new hire; probably have to be some control field on flex. Basically, this is a requirement made difficult by the decision to host each legislation on a different instance; I would never recommend clients to go down this route but I guess it's too late in your case.
If cross BG transfers are not common, e.g., less than 5 a week, I would recommend option 1.

What is the best way to create shared variable for multiple PXI(Real-Time) to GUI PC?

What is the best way to create shared variable for multiple Real time (PXI) to GUI PC? I have 16 Nos of PXI system in network and 1 nos of GUI PC. I want to send command to all the PXI system with using single variable from GUI PC(Like Start Data acquisition, Stop data Acquisition) and I also want data from each PXI system to GUI PC display purpose. Can anybody suggest me best performance system configuration. Where to create variable?(Host PC or at individual PXI system).

Dear Ravens,
I want to control real-time application from host(Command from GUI PC to PXI).Host PC should have access to all 16 sets PXI's variable. During communication failure with PXI, Host will stop data display for particular station.
Ravens Fan wrote:
Either. For the best performance, you need to determine what that means. Is it more important for each PXI machine to have access to the shared variable, or for the host PC to have access to all 16 sets of variables? If you have slowdown or issue with the network communication, what kinds of problems would it cause for each machine?
You want to located the shared variable library on whatever machine is more critical. That is probably each PXI machine, but only you know your application.
Ravens Fan wrote:
Either. For the best performance, you need to determine what that means. Is it more important for each PXI machine to have access to the shared variable, or for the host PC to have access to all 16 sets of variables? If you have slowdown or issue with the network communication, what kinds of problems would it cause for each machine?
You want to located the shared variable library on whatever machine is more critical. That is probably each PXI machine, but only you know your application.

What is the best way to create the layout for a single page website in Adobe Muse?

I was wondering the best way to create the layout for a single page website in Adobe Muse. Does anyone have any suggestions?

I know how to create a website but will that help me create a single page website? Below I will leave a demo of what I want. I want it to only have one page but multiple sections. What is the easiest way to create a single page website like the demo below?
Demo Website

What is the best way to have Mac setup for sync-ing 2 calendars? Any way to change? When we 1st got our Macbook we unknowingly set it up wrong--as 2 separate users, with separate everything. Good for contacts and email, bad for calendar, photos, music.

What is the best way to have Mac setup for sync-ing 2 calendars? Any way to change? When we first got our Macbook we unknowingly set it up as 2 separate users, with separate everything. Now I have an iphone and I want to sync calendars but not contacts or email. Any direction you could give would help! thx

Anyone...anyone? Bueller...Bueller?

What is the best way to follow the scenario for Out look integration with share point using SAP Gateway?

1)what is the best way to follow the scenario for Out look integration with share point using SAP Gateway?
2)workflow concepts for Purchase order?
3)Email triggering from out look for an approval process of PO? how these scenario can be best implemented with updated functions in Duet Enterprise.

Hi,
I do not have much idea on gateway integration with outlook but found out this document GWPAM Workflow Template which can be helpful for you to start with.
also you may want to post your question in SAP Microsoft Interoperability forum
Regards,
Chandra

Best way to update RBSELBEST table for invoice

what is the best way to update RBSELBEST table for PO invoice? Is there any BAPI or FM for this?

Thanks. I tried this one also, but it does not update the table.
in case if someone used this, what parameters i need to pass for this to work?

Best way to create a UI for a Composite app

Hi all,
What is the best way to create a UI for a Composite app that we are developing using CAF and GP.
1) WebDynPro Callable Object that implements GP Interface.
2) Consume the Application services(exposed as web services) in WebDynPro app
3) Creating a WebDynPro Model for the CAF Services.
4) Create a WebDynPro Application Callable Object (If yes how can we map the input and output params b/n WebDynPro app CO and CAF Application service).
Plz do remember we are using GP here.
Thanks in advance,
Best Regards,
Sudheer.

Hi,
You can use Web Dynpro or Visual Composer for designing UI for your CA.
1) WebDynPro Callable Object that implements GP Interface.
You can use Web Dynpro Component CO to use a single Web Dynpro component in your GP Activity.
4) Create a WebDynPro Application Callable Object :This is for entire Web Dynpro Application(multiple components).
2) Consume the Application services(exposed as web services) in WebDynPro app :
3) Creating a WebDynPro Model for the CAF Services.
For example, in updating operations first we have to get the existing data from Database.For getting this data you can use application services in your Web Dynpro component.Later expose this WD component as CO insert in a GP activity.
For creating operations, you can use Web Service CO(Application Service) directly in GP Activity.
These links are useful for you.
[link1|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a00c07d0-61e0-2a10-d589-d7bc9894b02a]
[link2|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10b99341-60e0-2a10-6e80-b6e9f58e3654]
[lnk3|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1078e3b0-ec5d-2a10-f08a-c9b878917b19]

What is the best way to erase my computer for personal stuff while leaving the computer ready to use

what is the best way to erase my computer for personal stuff while leaving the computer ready to use

If the Mac came with Mountain Lion or Lion, press Command, Option and R keys on boot, open Disk Utility, erase the disk and reinstall Lion or Mountain Lion. If it came with Snow Leopard or older, insert the DVD, press C key on boot, go to Utilities > Disk Utility, erase the drive and reinstall Snow Leopard

The best way to make proxy files for editing?

Hi,
What is the best way to create proxy files for editing? I'm thinking Apple ProRes 422 (Proxy). The original material is DVCPRO HD 1080i50, shot on Panasonic P2 cards, and copied on to hard drives. But as there is about 400 hours of it, I desperately need to find a clever way to make smaller proxy files for editing.
I would also like to make the proxies at a smaller resolution than 1080i for the editing process.
I guess it's possible to import the media and then batch export it to the proxy format, but Is there a better way?

I'm not able to ingest the material directly from the P2-folders as ProRes 422 (Proxy). No matter how much I change the import settings in "Log and transfer", it still ingests as DVCPRO HD 1080i50.
Correct. DVCPRO HD P2 can only come in as DVCPRO HD. You can't transcode it. AVCIntra P2 is what you can bring in as ProRes. (Sorry Tom).
I can of course transcode it form there to the proxy format and delete the ingested files,
Why? Why do that? You have ingested all the files, right? You ALREADY HAVE THEM...right? Why not work with them? You obviously have the room (20TB). Why import all this, then now take the days it would require to make proxies?
Making the ProRes-proxies directly from the P2-material seems more logical, or isn't it?
DVCPRO HD P2 cannot come in as anything else, so the offline/online workflow for them doesn't work unless you import it all, then transcode to a smaller format...but then need to keep the originals online to relink to when you are done. If you wanted to do an offline/online, you needed to research this better...or test it...before you shot your hundreds of hours only to find that what you want to do won't work.
Shane

What is the best way to increase the volume for the phone? My Dad has a hearing aid and could use more volume.

What is the best way to increase the volume for the phone? My Dad has a hearing aid and could use more volume.

https://itunes.apple.com/gb/app/hearyounow-your-personal-sound/id569522474?mt=8
Have a look here and in particular
"Customers also bought "

I am getting pop ups on safari and firefox lately and am worried i may have malware or something now on my computer doing this. What is the best way to check this out for sure and remove it?

I am getting pop ups on safari and firefox lately and am worried I may have malware or something now on my computer doing this. What is the best way to check this out for sure and remove it?

Please review the options below to determine which method is best to remove the Adware installed on your computer.
The Easy, safe, effective method:
http://www.adwaremedic.com/index.php
If you are comfortable doing manual file removals use the somewhat more difficult method:
http://support.apple.com/en-us/HT203987
Also read the articles below to be more prepared for the next time there is an issue on your computer.
https://discussions.apple.com/docs/DOC-7471
https://discussions.apple.com/docs/DOC-8071
http://www.thesafemac.com/tech-support-scam-pop-ups/

Best way to resize a graphic for slideshow

Similar Messages

Maybe you are looking for