Betreffende de Organizer van Photoshop Elements 10 (About the organizer of Photoshop elements 10)
Mijn versie van photoshop elements 10 werkt perfect
Doch na het afsluiten van het programma en even later terug opstarten vertikt de organizer te openen
Ik ben verplicht mijn PC volledig af te sluiten en pas dan kan ik terug de organizer laten werken
Heb photoshop elements volledig opnieuw geïnstalleerd doch hetzelfde probleem doet zich voor
My version of photoshop elements 10 works perfectly
But after the conclusion of the program and back a few moment later the
organizer won't open
I am obliged to shut down my PC completely and only then the organizer works again
Fully reinstalled Photoshop Elements 10 the same problem occurs
Strange problem?
Freddy Van Erp
Res. Beatrijs 23
3300 Tienen (Belgium)
016/821488
[email protected]
Yes that will work. If for example you have PSE8 installed, when you install PRE10 it can link to the PSE8 Organizer. But you could import your clips/media into a separate catalog for use with PRE. When you launch PRE10 simply click the Organize button on the welcome screen.
Similar Messages
-
I just found out about the switch from Elements to Adobe Revel. HELP
I do not want to spend any money on something I rarely use. I also do not want to grant "rights" to any person or corporation for my family pictures.
Will I need to delete my account?.Hi. There is not a switch from Elements. The switch is from Photoshop.com to Revel. Elements will work as it always did with the exception of communicating with Photoshop.com sharing and storage since that service is being discontinued.
In additon, Revel is free as long as you don't want to upload more than 50 files a month.
Check out these FAQ's and try Revel. After that, if you do not want your account, we can delete it.
Pattie
Forum for users moving from PS.com to Revel:
forums.adobe.com/community/ps.com_sharing_and_storage
Forum FAQ's:
forums.adobe.com/community/ps.com_sharing_and_storage/faq
Forum for Revel users:
forums.adobe.com/community/revel
FAQ's about the transition from Photoshop.com to Revel:
http://www.photoshop.com/misc/membership-faq
FAQ's about Revel and subscriptions:
http://www.adobe.com/products/revel/faq.html
Elements organizer/Revel Help:
http://helpx.adobe.com/elements-organizer/using/revel.html
Getting Started with Revel:
http://www.adobe.com/support/revel/gettingstarted/revel_gs.html
SHARE
FAQ: How do I share my photos in Revel?
http://forums.adobe.com/message/5092831#5092831
UPLOAD
FAQ: How do I add (upload) files to Revel?
http://forums.adobe.com/thread/1162795?tstart=0
DOWNLOAD
FAQ: How Do I Download files from Revel?
http://forums.adobe.com/thread/1166462?tstart=0
EDIT
FAQ: How do I edit photos in Revel?
http://forums.adobe.com/message/5088287#5088287
DELETE
FAQ? How do I delete a file in Revel?
http://forums.adobe.com/thread/1162793?tstart=0
SUBSCRIBE TO REVEL PREMIUM
FAQ: How do I sign up for Revel Premium?
http://forums.adobe.com/thread/1178780?tstart=0 -
Why does Adobe Elements 4.0 suddenly crash about the time Apple has a security update?
Why does Adobe Elements 4.0 suddenly start crashing about the time Apple has a security update?
An ADOBE FORUM "Community Professional" commented:
"Well, I'm not sure any of this is going to work, but go to your username>library>preferences and delete:
com.adobe.Photoshop.Elements.plist
The PSE 4 Paths and Settings folders (can't remember whether they're called Adobe Photoshop Elements 4.0 Paths or something different, but you want folders with Paths and Elements 4 in their names--you should be able to figure out which they are)
Opera preferences (if you have it)
Repair permissions and try again.
If it still quits, go to the PSE 4 folder in applications and delete the Adobe TWAIN driver from the plug-ins folder (note that you may have trouble with Epson scanners in PSE after doing this).
However, PSE 4 is pretty darned old and it's less compatible with every new OS X update, so what I've suggested may work and may not. FWIW, you probably will not be able to reinstall the program if you ever need to do so--installed versions of PSE 4 keep working in 10.6, but the installer does not."
Hope this helps -
great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my beloved Photoshop!
The Yosemite upgrade very often damages existing Photoshop installations. Thank Apple for that.
You need to uninstall and re-install Photoshop, then apply all the Photoshop upgrades from scratch.
But first, give us details about your setup:
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
CC lid geworden incl Photoshop, heb een 30dagen versie van Photoshop cc, die is nu verlopen en nu loop ik steeds vast in de wirwar van de Adobe jungle. Hoe krijg ik de boel op gang?
Sign in, activation, or connection errors | CS5.5 and later
Mylenium -
DIT abotions. Hoe installeer ik dat op het tweede werkstation?
My question was: I have two computers. On the First I downloaded tge Photoshop CC. I can download the second version (max. 2 users on one username) on my laptop, but how??? Under the same logname??
Met vriendelijke groet,
Geert
G.M.A. van Wylick
De Tichelarij 2,
5913 GS Venlo
Tel. 077-3547854 fax 077-3200924 gsm 06-53494202 [email protected]
Van: Atiqur Sumon [email protected]
Verzonden: woensdag 16 april 2014 12:38
Aan: GeertvW
Onderwerp: Abonnement van Photoshop CC
Re: Abonnement van Photoshop CC
created by Atiqur Sumon <http://forums.adobe.com/people/Atiqur+Sumon> in Photoshop General Discussion - View the full discussion <http://forums.adobe.com/message/6303146#6303146 -
Learning more about the features in PS touch
I was looking at PS touch, maybe for my ipod mini.
I was hoping to get more of a sense of what the features are, but it seems Adobe has replaced information with hype, giving us the Disney version of what their programs are about.
I'd like to know more about the features of PS Touch, specifically:
I assume I can use layers, but do they have modes such as darken, lighten, overlay, soft light, etc?
Can I create masks in these layers, so I have control over which part of the layer is applied to the image?
Does the curves tool have more than 3 points to adjust, can you add points as with full PS?
If I was working off my camera's memory card hooked up to the iPod mini, can I then do a save as of the image I'm working on, either saving it to the card or my device (in part to create a new image and to also keep the original) ?
It's very frustrating that this information is not more readily available to us. also, I may have missed it, but i didn't see a link to the forums from the Adobe pages, not under Learning, or about Adobe, or?
Regards, DavidIn order:
Yes, PS Touch uses layer blending modes just like in Photoshop (and Photoshop Elements). It doesn't have *every* blending mode, but the basics (like the ones you listed) are there.
The best that I can explain it as far as "masks" in PS Touch goes is that you paint your desired effect onto your image (via the Effects Paint tool). You do not need a mask layer per se as the effect is contained as you paint over the desired area. (You can adjust size, hardness, flow and opacity of the brush in this tool. If you have a tablet with pressure-senstive support, you can control size and opacity as well dynamically like you would with a Wacom graphics tablet connected to a desktop.)
You can add/subtract as many points as you want in the Curves adjustment. (There's a general Curves adjustment and one provided under the Effects Paint tool; both use the same interface for options.)
I don't think so, as the file system in PS Touch is self-contained (at least under Android; not sure about iOS). When you go to save a project, it's added into the main interface. (You can create folders to manage these projects, btw.) You can then export projects under a desired file type (like PSD or JPEG) locally or to a service like Adobe's own Creative Cloud or Dropbox. -
Documentation about the complete sap-proces-chain
Hi,
I'm a SAP-Beginner and I search a good Docu about the sap-business-process-chain. This means from the creation of a customer-order to the according
creation of a produciton-order up to the creation of an invoice!
Because I will be an abap-programmer, it will be the best, if the docu
show the table/files witch are effected by the processes!
Thanks a lot for your help!SD Configuration:
Enterprise Structure:
1. Maintaining Sales Organization
Sales Organization is an organizational unit responsible for the sale of certain products or services.
IMG -> Enterprise Structure -> Definition -> Sales and Distribution -> Define, copy, delete, check Sales organization
2. Assigning Sales Organization to Company Code
This assignment ensures all the sales made through this Sales Organization are accounted for in the assigned Company Code (Company Code is created by FI Consultant).
IMG -> Enterprise Structure -> Assignment -> Sales and Distribution -> Assign Sales Organziation to Company Code
3. Maintaining Distribution Channel
Distribution Channel is the way, in which Products or Services reach Customers.
IMG -> Enterprise Structure -> Definition -> Sales and Distribution -> Define, copy, delete, check distribution channel
4. Assigning Distribution Channel to Sales Organization
This assignment ensures, a Sales Organization can supply Materials to Customers through this Distribution Channel.
IMG -> Enterprise Structure -> Assignment -> Sales and Distribution > Assign distribution channel to sales organization
5. Maintaining Division
Division is a way of grouping materials, products, or services.
IMG -> Enterprise Structure -> Definition -> Logistics - General -> Define, copy, delete, check division
6. Assigning Division to Sales Organization
IMG -> Enterprise Structure -> Assignment -> Sales and Distribution -> Assign division to sales organization
7. Setting up Sales Area
All the sales are made from a particular sales Area. For creating a Sales Order Sales Area is compulsory.
IMG ->Enterprise Structure -> Assignment -> Sales and Distribution -> Set up sales area
8. Assigning Sales Organization- Distribution Channel- Plant
Plant is created ny MM Consultant.
IMG -> Enterprise Structure -> Assignment -> Sales and Distribution -> Assign sales organization - distribution channel - plant
9. Define Shipping Points
Shipping Point is the Organizational element, which is responsible for shipping the Materials to the Customers.
IMG -> Enterprise Structure -> Definition -> Logistics Execution -> Define, copy, delete, check shipping point
10 Assigning Shipping Point to Plant
This assignment ensures that goods from different Plant can be dispatched from different Shipping Points.
IMG -> Enterprise Structure -> Assignment -> Logistics Execution -> Assign shipping point to plant
Note: Ensure to do the undermentioned configuration also though it is not in Customizing node of Enterprise Structure.
11. Defining Common Distribution Channels for Master Data
Use
The purpose of this activity is to define distribution channels which have common master data..
Procedure
Access the activity using one of the following navigation options:
IMG Menu -> Sales and Distribution -> Master Data -> Define Common Distribution Channels
Transaction Code: VOR1
12. Defining Common Divisions for Master DataUse
The purpose of this activity is to define distribution channels which have common master data..
Procedure
Access the activity using one of the following navigation options:
IMG Menu -> Sales and Distribution -> Master Data -> Define Common Division
Transaction Code: VOR2
Pricing Procedure
In SD, Pricing Procedure is determined based on Sales Area (Sales Organization + Distribution Centre + Division) + Customer Pricing Procedure + Document Pricing Procedure. Sales Area is determined in Sales Order Header Level. Customer Pricing Procedure is determined from Customer Master. Document Pricing Procedure is determined from Sales Document Type / Billing Type (if configured). Once the pricing procedure is determined, Condition records are fetched. If appropriate condition records are found, the price is determined. If Mandatory pricing condition is missing, system will through an error message.
In SD, the steps to configure Pricing procedure are as under:
Step 1:
Condition table: If existing condition table meets the requirement, we need not create a new condition table. Considering the requirement for new condition table, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Condition Table (select the required fields combination, which will store condition record).
Step 2:
Access Sequence: If existing access sequence meets the requirement, we need not create a new access sequence. Considering the requirement for new sequence, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Access Sequence (Access sequence is made up of Accesses (Tables) & the order of priority in which it is to be accessed. Here we assign the condition table to access sequence.
Step 3:
Condition Type: If existing condition type meets the requirement, we need not create a new condition type. Considering the requirement for new condition type, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Condition Type. It is always recommended to copy an existing similar condition type & make the neccessary changes. Here we assign Access sequence to Condition type.
Step 4:
a. Pricing Procedure: It is recommended to copy a similar pricing procedure & make the neccesary changes in new pricing procedure. Pricing Procedure is a set of condition type & arranged in the sequence in which it has to perform the calculation. Considering the requirement for new Pricing Procedure, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Pricing Procedure --> Maintain Pricing Procedure.
b. Pricing Procedure: After maintaining the pricing procedure the next step will be determination of pricing procedure. Configuration for determining pricing procedure in SPRO is as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Pricing Procedure --> Determine Pricing Procedure.
5. Condition record: Condition record is a master data, which is required to be maintained by Core team / person responsible from the client. During new implementation, the condition records can be uploaded using tools like SCAT, LSMW, etc.
Normal Sales Order Cycle:-
Step 1: Sales Document Type
IMG > Sales and Distribution > Sales > Sales Documents >
Sales Document Header:
1. Sales Document Type:The sales document types represent the different business transactions, such as Inquiry, Quotation, Sales Order, etc. To create new sales order type, always copy as with reference to similar sales order. If possible use standard sales order.
2. Define Number Ranges For Sales Documents: Maintain number range with discussion with core team.
3. Assign Sales Area To Sales Document Types:
A. Combine sales organizations / Combine distribution channels / Combine divisions: Ensure to maintain these, else Sales Order creation will give error.
B. Assign sales order types permitted for sales areas: Assign only required Sales Order Types to required Sales Area. This will minimize selection of Sales Order Type as per sales area.
Sales Document Item:
1. Define Item Categories: If possible use Standard Item Category. Incase if required to create new, copy as from standard & maintain New.
2. Assign Item Categories: If possible, use standard. Formula for deriving item category: Sales Document Type + Item Category Group + Usage + Higher Level Item Category = Item Category
Schedule Line:
1. Define Schedule Line Categories: If possible use Standard Schedule Lines. Incase if required to create new, copy as from standard & maintain New.
2. Assign Schedule Line Categories: If possible, use standard. Formula for deriving Schedule Line: Item Category + MRP Type / No MRP Type.
Step 2:
IMG > Logistic Execution > Shipping > Deliveries >
1. Define Delivery Types: If possible use Standard Delivery Type. Incase if required to create new, copy as from standard & maintain New.
2. Define Item Categories for Deliveries: If possible use Standard Item Categories for Delivery Type. Incase if required to create new, copy as from standard & maintain New.
3. Define Number Ranges for Deliveries: Ensure to maintain number range.
Step 3:
IMG > Sales and Distribution > Billing >
1. Define Billing Types: If possible use Standard Billing Type. Incase if required to create new, copy as from standard & maintain New.
2. Define Number Range For Billing Documents: Ensure to maintain number range.
3. Maintain Copying Control For Billing Documents: Maintain relevant copy controls such as Sales Order to Billing, Deliver to Billing, etc.
The configuration differs from scenario to scenario & requirement of the client.
Regards,
Rajesh Banka
Reward point if useful. -
Need Business case Explaination about the Field in Customer Master
Hi all,
I have a doubt in Customer master Record
1. Customer Group
2. Price Group
3. Price list
4. Customer Stat.group
What I mentioned above fields i need business case explination, but all the above fileds are explaining about the Price and Statistics about the report. By using F1 Help i can understand but i need business case
Is there any link between those fields ?
@ Please dont close the thread if it is basic question please provide the details and link because i serached in Google but i couldn't able to findouthi
anuradha,
In my knowledge customer pricing group is the main in the customer master ,
you will one test case in customer pricing group in customer u can not fill it, the same customer u can rise the sale order , system sows earorr message, no customer master records maintain, it means when u create the sale order system take pricing procedure , pricing procedure determination ; sales area+customer pricing procedure +document pricing procedure assign to pricing procedure,(ovkk) ,
customer statical group
Sales Organization 0001 Sales Org. 001
Distribution Channel 01
Division 00
Cust.stats.grp 1 'A' Material
CustGroupMaterial 1 'A' Material
StatGrpSalesDoc 2 Returns, Credit Memo
StatGrpDocumentItm 1 Returns, Credit Memo
Update Group 1 SIS: Sales Document, Delivery, Billing Document
it is the static updating group for item level,
Sales Organization 0001 Sales Org. 001
Distribution Channel 01
Division 01
Cust.stats.grp 1 'A' Material
StatGrpSalesDoc 1 Order, Debit Memo
Update Group 1 SIS: Sales Document, Delivery, Billing Document
it is for static updating group for header level
it is use full in vov7 ,
price list and price group it is use full pricing to the customers, you can check it sale order header in sale tab u can find your required fields, -
Have an existing ex2010 sp3 organization.
Could not run ex2013cu1 setup from my newly built 2012 server, getting the error in the subject line. I used the command line to run the AD preparation steps successfully from my 2012 DC/GC, then tried to run setup again from the new 2012 server and
still get the same error. The error itself in the log is pretty useless:
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0137] [0] Starting Microsoft Exchange Server 2013 Cumulative Update 1 Setup
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0152] [0] Local time zone: (UTC-08:00) Pacific Time (US & Canada).
[05/07/2013 01:19:13.0152] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[05/07/2013 01:19:13.0152] [0] Setup version: 15.0.620.29.
[05/07/2013 01:19:13.0152] [0] Logged on user: DOMAIN\ADMINISTRATOR.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='sourcedir', Value='\\h1\f$\junk\installers\server\Exchange\2013cu1'.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='mode', Value='Install'.
[05/07/2013 01:19:13.0215] [0] RuntimeAssembly was started with the following command: '/sourcedir:\\SERVER\f$\junk\installers\server\Exchange\2013cu1 /mode:Install'.
[05/07/2013 01:19:13.0215] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0793] [0] Finished loading screen CheckForUpdatesPage.
[05/07/2013 01:19:38.0762] [0] Finished loading screen UpdatesDownloadsPage.
[05/07/2013 01:19:40.0496] [0] Starting file's copying...
[05/07/2013 01:19:40.0496] [0] Setup copy files from '\\SERVER\f$\junk\installers\server\Exchange\2013cu1\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
[05/07/2013 01:19:40.0700] [0] Finished loading screen CopyFilesPage.
[05/07/2013 01:19:40.0840] [0] Disk space required: 1292445007 bytes.
[05/07/2013 01:19:40.0840] [0] Disk space available: 23767240704 bytes.
[05/07/2013 01:19:59.0762] [0] File's copying finished.
[05/07/2013 01:19:59.0965] [0] Finished loading screen InitializingSetupPage.
[05/07/2013 01:20:02.0934] [0] Setup is choosing the domain controller to use
[05/07/2013 01:20:09.0325] [0] Setup is choosing a local domain controller...
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
[05/07/2013 01:20:11.0809] [0] Setup will use the domain controller ''.
[05/07/2013 01:20:11.0809] [0] Setup will use the global catalog ''.
[05/07/2013 01:20:11.0825] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0919] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0966] [0] Setup will search for an Exchange Server object for the local machine with name 'WEX1'.
[05/07/2013 01:20:12.0028] [0] No Exchange Server with identity 'WEX1' was found.
[05/07/2013 01:20:12.0044] [0] The following roles have been unpacked:
[05/07/2013 01:20:12.0044] [0] The following datacenter roles are unpacked:
[05/07/2013 01:20:12.0044] [0] The following roles are installed:
[05/07/2013 01:20:12.0059] [0] The local server does not have any Exchange files installed.
[05/07/2013 01:20:12.0075] [0] Server Name=WEX1
[05/07/2013 01:20:12.0137] [0] Setup will use the path '\\SERVER\f$\junk\installers\server\Exchange\2013cu1' for installing Exchange.
[05/07/2013 01:20:12.0137] [0] The installation mode is set to: 'Install'.
[05/07/2013 01:20:27.0591] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
[05/07/2013 01:20:27.0591] [0] Active Directory Initialization status : 'False'.
[05/07/2013 01:20:27.0591] [0] Schema Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Organization Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Domain Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0841] [0] Applying default role selection state
[05/07/2013 01:20:27.0872] [0] Setup is determining what organization-level operations to perform.
[05/07/2013 01:20:27.0872] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN.
[05/07/2013 01:20:27.0872] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[05/07/2013 01:20:27.0888] [0] InstallModeDataHandler has 0 DataHandlers
[05/07/2013 01:20:27.0888] [0] RootDataHandler has 1 DataHandlers
[05/07/2013 01:20:27.0903] [0] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. See
the Exchange setup log for more information on this error.
[05/07/2013 01:20:27.0935] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:21:04.0154] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:21:04.0154] [0] End of Setup
[05/07/2013 01:21:04.0154] [0] **********************************************Hi,
The cause is clearly described in the log:
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
I'd suggest you check NIC settings and AD configuration.
Hope it is helpful.
Fiona Liao
TechNet Community Support -
I've always assumed that I can't make any assumptions about the order in which elements are indexed by a for...each...in loop. Not even for a conventional indexed array. (Emphasis!: I'm not talking about associative arrays here, I'm talking about normal indexed arrays. Dense, no gaps.).
for each (var element:ElementClass in myArray) {}
May not traverse the array from first to last. I've never assumed that it's guaranteed anyway. Neither does the ECMA standard. I assume the compiler/runtime is at liberty to index the array in any order, which may even be different each time.
Whereas... for (var i:int=0;i<myArray.length;i++) {......var element:ElementClass=myArray[i]....}
....Is guaranteed to traverse the array from first to last. So I always use this looping statement if the ordering is important.
MY QUESTION IS.... In ActionScript 3, Can I just assume that the for..each..in will always traverse a dense indexed array from first to last?
Actually, my specific case at the moment is where another programmer is passing me an array,assembled within a for...each..in loop. But I need to assume the order of that array. If this is always going to work in ActionScript3, then no problem. Although I'll continue to worry about the ECMA standard for my own code, and wont make assumptions about ordering - but I won't force my anal-retentive programming style on the other guy.I did a test on it
case1:
var arr:Array = new Array();
arr[0] = 'a';
arr[1] = 'b';
arr[2] = 'c';
arr[3] = 'd';
for each(var arrEle:string in arr)
trace(arrEle);
always output a,b,c,d
case2:
var arr:Array = new Array();
arr[6] = 'd';
arr[0] = 'a';
arr[1] = 'b';
arr[3] = 'c';
for each(var arrEle:string in arr)
trace(arrEle);
always output a,b,d,c
so I assume array is created in this way: alloc a memory block for array first, when attaching new element(numeric indexd by i) to array, check if i >= length, put new element in the end of array, else put element at i; so in case 2, array is alloced in this way
array:{'d'} //6>0
array:{'a', 'd'} //0<1
array:{'a', 'b', 'd'} //1<2
array:{'a', 'b', 'd', 'c'} //3>=3
disclaimer: totally assumption!!! -
Thoughts about the bin window - bugs or features and workarounds...
Hi there,
I really have big toubles using the bin window. It is even worse in OSX.5 (the only thing I don't like with OSX.5 and Logic8!).
There are some Problems:
1. I can't move any audio-files to wherever I want them to without Logic is copying them back into the audio-folder by saving the song. The problem is that I want Logic to copy imported audio files into the audio-folder but if I change something manually Logic should remember that without working against me. So for example: I am bouncing a lot of audio into the bounce folder. In Logic 7 all the finished bounces were located there on the hard drive. Easy to find and to organize. But in Logic 8 they are moved to the audio-folder and I have to search very carefully which files I want to send to my client. That's the biggest source of trouble for me right now.
2. If I am making groups, Logic is sometimes copying even that audio-files back into the normal audio-folder. The problem here is: sometimes. I really have no idea what the problem is. Sometimes just some audiofiles are staying in the group (on the hd) for a couple of Logic-saves and then are moved back at the 10th save or something.
3. I am not able to organize my groups and audio files very well. So if I have group that always is shown on top of the bin window and I have a audio-bounce called "zoo" it is the last one in the list. Then I have to move it the whole way up to the group. That costs me about a half our per day. Way too much. There should be some kind of easier handling. For example a second window for groups or something. The next one is that I have to call the group something like 001AASFX or ZZZ_SFX so that I am able to find it fast enough in the finder. It was so much easier to go the bounce folder in Logic 7 days.
4. The hide-regions keycommand was unstable with OSX.4.10 but now with OSX.5 it is not working at all. If I choose a audiofile in the bin window and hit the standard keycommand for hiding regions just the region for that audiofile is hiding and instantly shown again. I want to have a shorter way to move my bounced files into the group that is the whole way up to the list's beginning.
So I wonder if that are new features or if it is really buggy. I am not able to work with that structure right now and with that kind of unstable location behavior. Are there any workarounds, tips, tricks? Is there anyone who feels like me? May I hope for a update?
That's it
Xcell
Message was edited by: Axel RohrbachHey Jim,
thanks for the support. Seems to be something Apple has to work on. There are some posts and questions about the bin window in every forum I know but there is never a "this is not want we want and there are bugs" - thread. In fact the whole Logic 8 structure with the one-window-gui is great and works much better than I expected. So it is no general "what the **** are they doing"-thing
Nevertheless, is there a way to get this to apple? I don't know if they are aware of these problems and perhaps the testers are making music with one bounce and that's it. Just one file is not that difficult to handle, organize and to find. But there are other users working in different ways (like us I think).
@ David: I am sorry but you are wasting time and thread-space. If you don't say anything if you do not feel comfortable nothing will change. You are not able to let it rain in Austria (yet) but there are real guys working at apple and it's not a kind of wonder that there is logic at all. So am trying to discuss here something and hope for any reaction or attention and don't need any "go deeply into your self and you will find a way"-stuff. Thanks anyway to bring god back to that forum.
Xcell
Message was edited by: Axel Rohrbach -
Need info about the integration Process.
HI ,
I would like to know about the different components of Integration Process like about the Receiver etc..
and how do we relate the properties of each component with the container.
Thanks in advancehi Syed
An integration process is an executable, cross-system process for processing messages. In an integration process you define all the process steps that are to be executed and the parameters relevant for controlling the process.
You implement integration processes when you want to define, control, and monitor complex integration processes that extend across enterprise and application boundaries. The design and processing of integration processes is also known as cross-component Business Process Management (cross-component BPM, ccBPM).
http://help.sap.com/saphelp_nw04/helpdata/en/68/6bfd3f9149ca42e10000000a1550b0/frameset.htm
follow this thread to learn how to define an IP
http://help.sap.com/saphelp_nw04/helpdata/en/68/6bfd3f9149ca42e10000000a1550b0/frameset.htm
You use a correlation to assign messages that belong together to the same process instance. A correlation joins messages that have the same value for one or more XML elements. A correlation is therefore a loose coupling of messages: at design time, it enables you to define which message a receive step must wait for, without knowing the message ID
http://help.sap.com/saphelp_nw04/helpdata/en/68/6bfd3f9149ca42e10000000a1550b0/frameset.htm
regards
sandeep
If helpful reward points -
Question about the ECC6 migration and the retrieving of partner's address
Hi experts,
I have already post a thread about the use of the table BUT021_FS instead of BUT020 for retrieving partner's standard address.
I do modifications to my specific programs.
But what about the standard?like BUA_BUT020_SELECT_WITH_PARTNER for example
If I read the standard code, I see that it is still using the indicator XDFADR to specify if this address is standard or not.
I am new at ABAP and I want to know your analyse about it.
So, my question is : Is the result of this FM (partner address) correct? what I mean to say if I will use this address to determine if it is a standard or not.
Best regards.Hi,
I understood what you mean but I don't use this FM explicitly.
I am analyzing a CRM 7 dump and I see in the traces of st22 the use of this FM.
The dump appears when I create new Organization and Contact in CRM WebUI. May be it's a validation of fields of address.But I think, I must put this other thread in CRM, but I you had some experience with it, it would be very helpful.
Thank you for your help,
Best regards. -
Questions about the content of download meeting recording .zip file
I tried posting this on the resurrected Connect forum, but my Adobe ID wasn't recognized there....
Concerning the files that are included in the .zip file of the meeting recording that can be downloaded:
1) Is there any documentation describing the files and their contents (i.e. what each file represents, what each XML element and attribute in those files represent)
2) Are there any files that capture mouse movement on a shared desktop?
Thank you!Hi Sean,
Regarding your first post:
Thanks Jorma! I don't have access to an FMS build at the moment but I'm quite certain it's there. As for contacting Jaydeep, I am 90% sure he authorized us to broadcast his email on here if folks had questions about the tool, but, in the case that I'm wrong and he didn't - I'm going to double-check first.
Regarding your most recent post..
"To be clear, the most critical goal I'm trying to accomplish is to create an automated process that will download the recording meeting at its highest quality in a consistent and reliable manner".
I personally believe this is possible; unfortunately, I haven't seen it done yet. If your recording contains:
- audio
- a camera feed
- screensharing
Then I think you might be able to get this going. If it contains shared content, like a shared PPT, this gets trickier.
"To do this, of course, I have to reproduce some of the functionality that Connect provides, starting and combining video and audio streams according to the instructions in the control files."
Exactly right. If your recording didn't contain shared content, then all you've got on your hands are a bunch of audio/video files that you could edit together as you wanted with your favourite video editing tool. If it contains shared content, here's (at a high level) what's happening.
For shared PPTs or FTContent files:
First (for version 9 recordings only), Connect reads the information on the Shared Content's location and SCO within mainstream and indexstream and validates it before loading it. I don't recall this happening to the same extent with version 8 or earlier, but maybe it was. Now, if the content is validated (ie. Connect can find it) the share pod will display as black, if it doesn't, you get an empty pod with an message like "No content is being shared" or something like that.
Connect then looks at the actual FTContent file, and loads the content that is to be shared using the file path and sco ID listed in here. It's important to note that the SCO ID and file path in here will likely not be the same as the original file you uploaded to your room, it's a new SCO id (I believe SCOs of this type are called referenced scos) and new path.
Now...if I was going to build some sort of player which would play all these files in one screen to make a recording...I might not want to use Connect's code here. If you know the file path to the shared content (from FTContent), you could easily view it with the content URL (conveniently also in FtContent). I'm not a coder, but I'm envisioning something like Presenter's GUI where you've got the presentation's content in the main area, and a video file (if there is one) playing back on the side.
Anyways, food for thought if you want to try to go about this. Connect recordings are incredibly complex and they come with a big learning curve, but if you can make sense of them the knowledge is quite valuable.
Maybe you are looking for
-
F4 help for a field in item table in a view cluster
Hi All, I have a view cluster with two tables. I should provide F4 help for field in item table based on the selected row of the header table. F4 should have only values fetched based on the header table entry. How can i achieve this. Please suggest.
-
TS3297 Why is my iTunes and App Store defaulting to US when I am in the UK?
I somehow managed to get onto the US version of the App Store and I can no longer get the default back to the UK. I am allowed to change the icon in the bottom right hand corner, however it defaults back to the US when I try to update my outstanding
-
Can I use my Upgrade in the Apple store instead?
Wanted to know if I'm allowed to use my upgrade at the apple store since i was able to reserve one there?
-
Hi, I have a problem, how can i delimit the InfoObject in a Cube for security in BW, the user can see the reports of the cube, but there are some fields that they shouldn't have permission. Thanks.
-
[SOLVED]dwm-personalized Lightdm stuck in loop
Hello, I am using following configurations directly from Arch dwm wiki. After I provide my login and password, it takes me right back to lightdm. I am able to log-in using both regular dwm session and xinitrc. /usr/share/xsessions/dwm-personalized.de