BEx Analyzer Design 7.0 toolbar visible in Excel 2010, but not working

I use Microsoft excel 2010 in my PC. I installed patch for BI710 below. However I can not use any BI7.0 toolbar after installation.
bi710sp08p_801-10004472
bi710sp11_1100-10004472
BI3.5 toolbar is working fine.
Does anybody know how to fix this issue?
Many thank!
rajatina.

Hi Rajatina,
We move from 3.5 to 7 sometimes back. We encounter similar issue where we have 3.5 and 710 in the same mechine. What we did, we uninstall both, and only install 710. and it works fine.
But for few cases, i did see user who has 3.5 and 710 can still use the BEx analyzer. So, i guess some installation sequence on something needs to be observed. But for our case, since we move to 710, we remove the 3.5.
Hope this helps.

Similar Messages

  • CS6 design and web premium, looking to download  it but not working?? can anyone help?

    I have purchased the CS6 design and web premium at amazon and have had trouble downloading it. First i needed the correct processor, such as a minimum of Snow leopard or 10.6.8. I need help getting started because nothing is working for me? If anyone has any input please let me know. Thanks!

    Hi
    Please find the download links below
    http://prodesigntools.com/adobe-cs6-direct-download-links.html
    Please read the download instructions carefully befoe downloading.
    Hope It helps
    Thanks

  • Bex Analyzer Design Mode

    I am creating a workbook using the new Bex Analyzer Design Mode. I klick on the "Table" icon and then double click to get into the <b>Analysis Grid Properties</b>.
    Here I select a Dataprovider and Query. Now here comes my question. On the Analysis Grid Properties - Tab "General" you have the possibility to influence "Behavior" by checking or unchecking certain fields:
    - <b>Can I check Field "Use Formulas" in combination with
      field "Allow Navigation"?</b> Does that mean that I use
      the "Convert to Formula" Function for the query but am
      still a able to drill down and slice and dice?
    - I am a little confused because I thought that when
      using the <b>"Convert to Formula" Function you are not
      able to use the drill-down/slice and dice functionality
      any more????</b>
    Can you help me with that?
    Thanks a lot
    Message was edited by: Alex Miller

    Yes, you can check both and actually use the slice and dice functionality and formulas at the same time if you set the properties from design mode. For runtime mode, if you choose convert to formula, you loose the drilldown capabilities.
    It is not recommended to use both at the same time as the cell references that you use in the "Convert to Formula" mode change when you drilldown, and and copies of those references aren't updated.
    This may help you in some creative scenarios, but in general, I wouldn't use these 2 together.

  • Report visible for one user but not for other user

    Hi all,
    We have a situation where a report is visible to one user but not to some other user. What could be the possible explanation for this? Please let me know.
    I need quick responses.
    Thanks in advance,
    Sananda

    Hi Sananda,
    Just assign the saem roles as the other user who can view ..
    You can inform the Auth/basis team and they shud be able to do this..
    The T Code is RSECADMIN>user  Tab>Assignment>user.Display and BView the roles here..
    or goto SU01 and check for the Roles Tab.....
    The New user must have the same roles as that of the other..
    Rgds
    SVU123
    Edited by: svu123 on Sep 22, 2010 7:14 AM

  • Row text Visible in Excel layout but missing in Web layout

    Hi,
    My row text is visible in Excel layout but it is missing in web layout. Only the first row is missing text while the other rows are showing
    The planning layout that I am using is also used in another web layout but I don't have same issue.
    I have tried to the following.
    - Retransport the layout
    - delete the row and recreate it
    but the issue is still the same.
    thanks

    found a work around solution to resolve it.

  • Pictures I've taken are visible on my iPhone but not my camera roll. has happened twice.

    Pictures I've taken are visible on my iPhone but not my camera roll. This has happened twice. On a set of pictures taken 11/2/13 and today 11/5/13. Is there a solution for this. This is unacceptable. Now it's not showing any new pictures taken at all.

    SisterDee wrote:
    I'm with you. It doesn't make any sense to me either. However, when I view my pictures as a collection and select it - nothing is there. It is a clear picture.
    The problem is that what you originally said, "Pictures I've taken are visible on my iPhone but not my camera roll" , has nothing to do with your actual problem. 
    Define "clear picture".  Do you mean blank image?  Are you saying there are no pictures to view, only blank screen where the picture should be? 
    If so, restore the iOS in iTunes:
    iTunes: Restoring iOS software

  • Bex Analyzer BI 7.0 on Vista Microsoft EXCEL  2007

    Hi to all,
    I have this configuration in my pc:
    SAPGUI 7.10
    SAP NetWeaver BI 7.0
    Patch level 8 (bi710sp05_500-10004472,bi710sp06_600-10004472,
                         bi710sp06p_601-10004472,gui710_8-10002995 and 
                         gui710_pdb_8-10002995).
    Windows Vista
    Office 2007
    When i open Bex Analyzer with BI 7.0 frontend browser and logon to my BW system, i get the following error "Microsoft Office Excel has stopped working" "Check online for Solution and restart the program"
    however when i use Bex Analyzer 3.X frontend browser everything is working fine.
    Please help,because most of my queries are converted to BI 7.0 frontend.

    i'd suggest u research some oss notes.
    Take a look at the following:
    1073426
    1045244
    1039191
    these may not be exact solutions, but will guide you to other notes as well...

  • Report runs fine in Analyzer but not working when executed fromQuerydesig

    Hi,
    I have a issue with the Bw report which is not showing any data for Keyfigureswhen i execute the report related to APO from Bex query designer in Web.
    But the same report executes fine in the Bex Analyzer.
    If any one has faced this issue earlier,update us reg that.
    We are doubting any prob related to catch memory as the java link for the report is not working.Report works fine in RSRT.
    Vamsi

    Hi there,
    Can you please let us know what cache settings you changed, as we are having the same issue.
    Many thanks

  • Report runs fine in Analyzer but not working when executed fromQuerydesiger

    Hi,
    I have a issue with the Bw report which is not showing any data for Keyfigureswhen i execute the report related to APO from Bex query designer in Web.
    But the same report executes fine in the Bex Analyzer.
    If any one has faced this issue earlier,update us reg that.
    We are doubting any prob related to catch memory as the java link for the report is not working.Report works fine in RSRT.
    Vamsi

    Hi there,
    Can you please let us know what cache settings you changed, as we are having the same issue.
    Many thanks

  • Color Swatches in Toolbar for Fill and Stroke are not working properly.

    The color swatches in toolbar for fill and stroke are not functioning as they should.  When I select an object on the artboard, the swatches display fine in the toolbar for what they should be.  However, when I double-click on those swatches from within the toolbar to modify the color, the color which comes up is #000000 instead of the actual color it should be. 
    I am using 16.2.1 (cloud) for Mac OS 10.8.2
    I've submitted a bug report, but want to know if anyone else has had this issue and what they did to resolve the issue.
    Also, the eyedropper tool is buggy and occasionally places the #000000 into an object instead of the characteristics the eyedropper is selecting.  I don't have any hidden layers or weird groupings, it just randomly decides when it is going to work or not.
    I've never had these issues on previous versions of illustrator and have been proficient in all versions since 2007.

    Double click the eyedropper, and turn on appearance, is off by default.
    For your #000000 color problem that also likely is related to appearance setting. You may have for example have some with #000000 at the character level, and another color at the type level.

  • How to get rid of text in bookmark toolbar? the default reset will not work

    my bookmark toolbar has changed. I clicked on default reset so just icons show but it will not work. can not get rid of text.

    The Bookmarks Toolbar, by default, shows both icons and text. Here is an Add-on that will allow you to show only the icons.
    *'''''Roomy Bookmarks Toolbar''''': https://addons.mozilla.org/en-US/firefox/addon/roomy-bookmarks-toolbar/
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • Designer 6i + 9i: Java tools (Version History etc) do not work in 9i

    1.
    I have installed both Designer 6i (4.2) and 9i in different homes.
    6i works fine, but in the 9i installation the java tools, such as Version History Viewer etc. do not work. The java classes cannot be found.
    Any suggestions?
    2.
    6i R4.2 and 9i seem to work against the same repository version, so I can use 6i for the missing parts. Will this be working still after future patches of 9i?
    I need the combined 6i/9i installation because my laptop is used both for (6i) training and 9i development.

    Hi Peter,
    1) This is most probably caused by your java class path being longer than
    999 characters. We are aware of this problem and it is recorded as a bug.
    Simply reduce the length of your class path to less than 999 characters
    and the Java tools should start OK. The offending Registry variable you
    are looking for is:
    HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\HOME0\REPADM61\DEFAULT_JVM_PARAMS_THIN_JDBC
    JVM_CLASSPATH_DEFAULT_THIN_JDBC
    There is an also one or two issues with the JDBC thin drivers used and
    the 'increased sensitivity' of the 9i database tnsnames.ora file content
    and structure. The Release Notes for Designer 6i Release 4.3/9i Designer
    9.0.2.1.0 should more details on this and available workarounds.
    I suggest you look at these and implement the tnsnames.ora workaround at
    least, in order to protect against future connection problems. By the way
    - 8.1.7 works fine with respect to these connection issues.
    2) Please see this post from this forum for more details =>
    Re: Oracle 9i database problem
    Hope this helps.
    Regards,
    Dominic
    Designer Product Management
    Oracle Corp

  • Drive visible in Disk Utility but not Finder.  Why?

    I have a PowerMac G4 (mirrored drive doors) with 4 hard drives installed. 3 of the drives are set-up in a striped RAID array and the other one is my boot drive with two partitions. One one partition, I have OS X 10.3 and I can see the RAID drive fine. On the other partition, I fresh installed 10.4 but the drive does not appear on the desktop. Strangly, I can see the drive in Disk Utility and it shows me the mount point. I can even unmount and remount it but it still does not show up in the Finder. I had 10.4 server installed prior to the fresh 10.4 (not server) install and that showed it fine. I tried to see the drive in Terminal but also does not appear. Why does my drive appear in Disk Utility but not the Finder?

    BDAqua wrote:
    Yes, it needs the path to the drive...
    :-/ Yes, I got the command in completely with the path to the drive like it states in the other post. I have no idea why it didn't recognize the command as I'm not as familiar with UNIX/Linux commands as I'd like to be.
    Anyways... I found the cause of the problem (incase it happens to anyone else). Here's what happened:
    The ownership on the root of my RAID volume was set to be read/write for me (under my proper username) and no access for anyone else including Admin. When I installed a fresh OS, the default user was Admin (who had no access under the previous OS). If I would've taken the time to set-up my proper account (with the same owner name as my previous OS) then it would've been visible again but since I didn't see it under the default Admin account, I stopped there to troubleshoot. Another way to make it visible was just to change the access privileges from my previous OS to be read/write for other users (or at least Admin). I would think that checking the box for "Ignore ownership on this volume" would've remedied that but for whatever reason, it didn't.
    Thank you for all your help. I did learn a little even if it wasn't the direct solution. Now if only I could get Disk Utility to restore my old image without giving me crazy errors... But that's another issue altogether. ;-D

  • Data Visible At Aggregated Level but not at Leaf Node Level in ASO

    Hi,
    I am facing an issue in Essbase Version 7. I have a BSO - ASO partition. I have 4 dimensions Customer, Accounts, Product and Time. When i try to view data across customer, time and accounts the data is visible at the leaf node level and the aggregated level. But when i include Customer in my analysis the data is visible at an aggregated level for the customer but not a the leaf node level. What could be the cause of this? I am not getting any errors during my data load in ASO as well as when i run the aggregation in ASO...
    Any inputs on this issue are highly appreciated....

    Without having complete information, I'll guess you are trying to look at the data in the BSO cube. I would look at the partition definition. One of two things is most likely happening
    1. You only have the partition defined to look at the top level of customers
    2. THe member names of lower levels of customers is not consistent betweent he two cubes and you don't map member names.
    You can prove that is it a partition definition problem by doing the same retrieves from your ASO cube. If you get back data you know it is a partition definition problem. If you don't get back the proper data you have different problems. One that would not seem logical unless you had odd formulas on your ASO cube.

  • BEx Analyzer with GUI 720 and MS Office 2010 does not work

    I have recently installed SAP GUI 720 with BEx addon (7 and 3.x) on a computer with Office 2010 and Windows 7.
    All BEx components work fine except Analyzer 7.
    When starting Analyzer 7 nothing happens.
    I have tried instead starting transaction RRMX from a BI system but this generates a short dump.
    Does anyone have an idea about what could be the problem?
    <<text removed>>
    Best regards,
    Didrik
    Edited by: Matt on Sep 22, 2010 8:17 AM

    Hello Didrik von Essen,
    guess its issue with Excel Addins.  i rectified the same issue by enabling the excel addins.go to Application wizard. and change the  please find the screenshot . let me know if it works

Maybe you are looking for