Row text Visible in Excel layout but missing in Web layout
Hi,
My row text is visible in Excel layout but it is missing in web layout. Only the first row is missing text while the other rows are showing
The planning layout that I am using is also used in another web layout but I don't have same issue.
I have tried to the following.
- Retransport the layout
- delete the row and recreate it
but the issue is still the same.
thanks
found a work around solution to resolve it.
Similar Messages
-
BEx Analyzer Design 7.0 toolbar visible in Excel 2010, but not working
I use Microsoft excel 2010 in my PC. I installed patch for BI710 below. However I can not use any BI7.0 toolbar after installation.
bi710sp08p_801-10004472
bi710sp11_1100-10004472
BI3.5 toolbar is working fine.
Does anybody know how to fix this issue?
Many thank!
rajatina.Hi Rajatina,
We move from 3.5 to 7 sometimes back. We encounter similar issue where we have 3.5 and 710 in the same mechine. What we did, we uninstall both, and only install 710. and it works fine.
But for few cases, i did see user who has 3.5 and 710 can still use the BEx analyzer. So, i guess some installation sequence on something needs to be observed. But for our case, since we move to 710, we remove the 3.5.
Hope this helps. -
Hi Experts
I have two radio buttons and 4 text fields as follows,
parameter : a radiobutton group g1,
b radiobutton group g1.
parameter c(10) type c.
parameter d(10) type c.
parameter e(10) type c.
parameter f(10) type c.
If I want to select radiob button "a" first 2 text visible is to true.
next 2 text visible is false.
And if i select radiob button "b" first 2 text visible is to false.
next 2 text visible is true.
But we should not use any group and loop at screen.
without using how can we do this, can anyone help me pls.
Thanks in advance
regards
rajaramhi Raja Ram
already discussed in our forum.. kindly check
REPORT ztest_selection.
PARAMETERS: p1(10),
p2(10),
p3(10),
p4(10),
p5(10).
PARAMETERS: r1 RADIOBUTTON GROUP g1 USER-COMMAND abc DEFAULT 'X',
r2 RADIOBUTTON GROUP g1.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF r1 = 'X'.
IF screen-name CS 'P4' or screen-name CS 'P5'.
screen-active = 0.
modify screen.
ENDIF.
ELSE.
IF screen-name CS 'P1' or screen-name CS 'P2'
OR screen-name CS 'P3'.
screen-active = 0.
modify screen.
ENDIF.
ENDIF.
ENDLOOP. -
"Numbers stored as text" error in Excel when I schedule a report
Dear all,
When I schedule a report, I got a "Numbers stored as text" error in Excel.
But when I save as xls directly from webI, I have no error in the excel sheet.
So, is it a bug ? I have the BO XI 4.0 version.
Or is there a special option to set concerning schedule ?
Mike.Hi,
First check the object data type in webi. Normally this error will come when object/variable data type is Text in the report.
If you are getting this error with object data type number then add 0 in the object and see.
Like =[Object] + 0
It will force the value to be converted in the number.
Regards,
Amit -
Repeating row texts when exporting web report to Excel
Dear all,
When exporting a web report (including a structure/hierarchy) to Excel (via the 'export to excel button), the row texts (e.g. balance sheet texts) appear twice (column A and B)in the Excel result.
When using the web context menu 'Export to Excel' this issue does not occur.
I am using a BW 3.5 system which has been upgraded to support pack 16.
I assume it is the combination of the structure and the 'export to excel' functionality that does not match up, because when I switch off the hierarchy functionality in the web report query properties, the export to excel does not give me any problems.
Does anyone know how to solve this issue?
Thanks in advance,
Arjan.Did you write that software, COTS package called Medgate?
If not then ask that company for support. No one here would know how to fix it. They are using the CR RDC report engine.
Thank you
Don -
Conversion from .pdf to .docx:
I have converted a text in Slovenian in .pdf, but all the accents are missing in the converted .docx. version.
Does Adobe have a converter for texts with European-language accents, or shall I cancel my subscription?Subscription for what: ExportPDF or Acrobat?
[topic moved to Acrobat.com Services forum] -
Can i set the content of input text in a form layout in the uix page center
Hi
i have a simple question, how can i set the content of an input text in a form layout in the .uix page center?
i saw in the page properties but i didn't found.
thank you for your help.
Edited by: Islem on 19 déc. 2008 00:22Sirrick,
If I understand your question correctly, you want to programmatically set how many array elements (clusters) to show. You can do this with the Array properties: Number of Rows and Number of Columns. Please see the attached VI.
Zvezdana S.
National Instruments
Attachments:
Array_Elements.vi 20 KB -
Validate mandatory field in BPS Excel layout
Hi Sdner
In my BPS Excel layout i want to have some characteristic as mandatory.If i don't put any value for them system will put a # by default which i don't want. system should prompt a error message that particular field is mandatory and enter some value. I can check this thru planning function(FOX) but the problem is all characteristics in that row will greyed out after function execution and hence can't be changed by user.
Does somebdy know if there is any workaround to solve this ?
Thanks
Tripple kHi Tarun
Use XL macros to validate data in a column.
When macro executes it first unprotect the worksheet,then we have our custom code for validation and error message, after that it is followed by a protect sheet command.
My Prob is that if error is there in any field raised by macro, user should be able to edit those fields but as we are protecting our worksheet in macro, editing is not possible.
I can't unprotect the worksheet because then user can change anything.
+Use a read function module on planning layout. While you are in layout change mode use lbexit_fm as a transaction code. You can read data from planning layout and write validation code and error message in ABAP function module.+_
I used this Tcode and FM, but they are ment to read Non SAP area of Excel sheet. The actual layout(Data Record)(SAP Area) which we want to read is not coming in internal table while executing FM.
On Execution it is saying that reading and writing on SAP protected data is not allowed.
If you have done any of these workaround then can you please put some more lights on this ?
Thanks
Tripple k -
Hidden report items with toggle are visible in Excel when a report is exported to Excel.
Hi
I have 4 Bar charts and 4 text boxes in one report in SSRS Report . These charts are hidden based on parameters. I have one visible chart and one text box when report is rendered .
When report is exported to excel 4 charts are visible. Each Bar chart has one textbox in toggle box. If I set toggle to None all hidden charts will be invisible in excel file.
I used iif(Globals!RenderFormat.Name=" EXCEL",False,True)
but it does not work when the chart is toggled by a text box.<v:shape alt="" id="Picture_x0020_1" o:spid="_x0000_i1025" style="width:6in;height:396pt;"
type="#_x0000_t75"></v:shape>Hi Katherine
Thank you for your quick response.
I am working with three versions .(SQL SERVER 2008, 2008 R2 and 2012)
I designed all reports in SQL Server 2008 and uploaded them in other versions.
For example, I have a chart that it is invisible when the report is initially run.
I want to hide this chart in excel when I export it to Excel format.
In SQL Server 2008: If the toggleitem of a chart sets to a text box the chart is visible in excel when it is a hidden item in the report .
I checked in PDF and word format it is fine and hidden items are not displayed.
There is this scenario for SQL Server 2008 R2 and SQL Server 2012. I tested Globals! RenderFormat in two versions but it does not
work. The main issue is toggleitem. If I remove toggleitem from hidden items they are invisible in three versions when they are exported to Excel. I am not sure if I design report in Sql Server 2008 R2 I can hide some
report items with toggle in Excel format or Not?
Thanks -
Hello,
Could anybody explain me, how can i insert into BPS excel layout excel and Visual Basic functionality (buttons, graphics, formulas)?
All my worksheet's rows are locked.
Could you send me docs about SEM BPS modeling?
Thanks in advance.
Best Regards,
Arunas StonysHello Arunas,
you can make your changes on the third screen of the layout builder; if you save the planning layout these changes will be saved in the Excel template of the planning layout.
Usually (dependind on the changes) it may be more convenient to download a copy of the master template and implement your changes there. Then you can checking the Excel file as an Excel template for the planning layout, e.g. with report UPP_LAYOUT_CHECKIN, cf. note 428092.
Be careful with data in the Excel template: In the 'SAP area' the Excel templates contains no data (the dummy data
you see in the third screen of the layout builder will be cleared when you save the layout). Data in the SAP area will be overwritten at run time with transaction data, but the size of the SAP area (e.g. the number of used rows) of course depends on the transaction data.
Regards,
Gregor -
Adding rows to an existing Excel File.
Hey,
I need to be able to add rows to an existing Excel File. I just wanted to know what are my options here.. any sample VIs already existing?
any help is appreciated.
Regars,
PeteYes, the Report Generation Toolkit works very well for this (active x underlies). You can use the Write to Spreadsheet File.VI to append data to an Excel file. But keep in mind this file is text-based and not a true Excel file. That doesn't mean much unless you want manipulate the file with Active X, in which case you will have problems (such as col width, for instance). If you have Report Generation Toolkit, use it. It's very easy and flexible.
Reese, (former CLAD, future CLD)
Some people call me the Space Cowboy!
Some call me the gangster of love.
Some people call me MoReese!
...I'm right here baby, right here, right here, right here at home -
Error in web interface excel Layout
Hi ,
I have an excel layout in the web interface, which is designed to enter plan data manually. It is working fine when we enter some data and save. But it is giving following error when clicked on'Refresh' button of web interface .However it is working fine with other ALV layouts in the same interface.This is the FM : API_SEMBPS_REFRESH calling from the 'refresh' button.
Short text -
There is no instance of the planning processor for handle 74C1F787C20AC345B12ACA8EF2361C8D
message number -
UPP_PP_K051
we are on BW 3.5 & SP 16. and front end GUI 6.4 and excel 2003.
Any light on this is very much appreciated.
Best Regards,
RameshHi,
Seems the problem is with your ITS server. Contact your basis team.
Regards -
Copy a table in Safari and paste special, as text, to an Excel worksheet
I am attempting to write Applescript code to copy a table in Safari and paste special, as text, to an Excel worksheet.
When I perform the operation manually, all the rows of the Safari table are pasted into Excel in a single column, i.e. after all of the data in a row of a table is pasted vertically into Excel,the next row is pasted in the next open cell below in the same column, as I need it.
When I use the applescript line..."paste special on worksheet format text" Excel pastes the table data in rows AND columns , like the table looks in Safari, but I do not want it pasted this way.
Any ideas on how to get my Applescript code to perform the same manual operation?
Thanks!I do not know what Excel you have, but to copy a table from a Safari's page, you could use the table tags of the page's source to get the table you want.
That is, use text item delimiters.
deivy -
Tabular model. Define column description to be visible in Excel
Hello,
I edit a Tabular Model in SQL Server Data Tools.
Then I connect to it through Excel, where I see the names of the tables, column and measures.
I would like to see descriptive names of the entities in Excel. There is "Description" field in a model, but Excel still displays the real names of the columns.
I can only do that by setting description in the field parameters in Excel for each pivot table(there are many)
Can I implement such functionality using SQL Server Data Tools fro VS2013 and Excel ?Hi Ruslan,
According to your description, you created a SQL Server Analysis Services Tabular model project, now you need to define column description to be visible in Excel, right?
In SSAS tabular, there is a measure property Description
that description of the measure. The description will not appear with the measure in a reporting client. Please refer to the link below to see the details.
http://msdn.microsoft.com/en-us/library/hh230824.aspx
For the tabular model table, the table description property is a text description for the table. In PowerPivot for Excel, if an end-user places the cursor over this table in the field list, the description appears as a tooltip.
http://msdn.microsoft.com/en-us/library/hh479562.aspx
Regards,
Charlie Liao
TechNet Community Support -
Interactive Report - Include Non-selected Column in Row Text Search
Hi,
We have an interactive report that contains many columns. NAME VARCHAR2(30), TYPE VARCHAR2(30) etc and DESCRIPTION VARCHAR2(4000).
Normally the DECRIPTION column would not be shown (avalilable for dispaly via 'Select Columns' but not selected), however we need the default Row Text Search (ie direct entry into the search field instead of creating a column filter) to search the DESCRIPTION field wether it is selected for display or not.
This will allow the user to enter a term that may be contained in the DESCRIPTION to find records without trying to display a 4000 character field in the report - which just looks horrible.
We are using ApEx 4.1.1.
Thanks,
Martin FiggHi Ray,
As I expected this has got us very close. We went with the code:
select
facility_id,
facility_name,
'<span title="' || facility_desc|| '">'||substr(facility_desc,0,50)||decode(sign(length( facility_desc)-50),1,' (More...)',NULL)||'</span>' facility_desc,
equipment_id,
equipment_name,
'<span title="' || equipment_desc|| '">'||substr(equipment_desc,0,50)||decode(sign(length( equipment_desc)-50),1,' (More...)',NULL)||'</span>' equipment_desc,
from
rf_full_item_list_vwhich works well. The only issue is that when you download to csv you get the html tags etc as well. Put I am a lot closer to a solution than we were.
Thanks again.
Martin
Maybe you are looking for
-
Please help me with my laptop!
Hello. I have a Toshiba Satellite L355d-s7815. It was bought in September. I go to school fulltime online so this computer has been used almost every single day since it's been purchased. And up until two weeks ago it worked just fine. Now, it turns
-
Can anyone help my itunes stops working when i connect my ipad to my computer a windows error message comes up looking for solution but then closes itunes.
-
How to include print date with time on SkillBuilders Schedule Plug In?
Hi, Do you have an idea how to include and get the print date with time on the SkillBuilders Plug In? It shows me the date only, time not included. Have tried to put "HH24:MI", "HH24MI" or Tochar(HH24:MI)? No result?? select p.fullname, sbip_schedule
-
Adobe flash updater appears to lock user profile files in Windows 7
Hello All, I don't own any Adobe products, but I wanted to put this up so that others who run into this issue can find it, and hopefully Adobe will look into it if it's common. This evening, I had just restarted my computer (Windows 7 RC), and after
-
I trying to create a DG from a two node RAC instance. All the machines are at the same patch levels and OS levels (11.1.0.7/Solaris 2.10). Our GRID CONTROL is at 10.2.0.5 and patched to what I think is the latest level. The wizards works fine and the