BEx Analyzer : missing Selection screen for NON- SAP_ALL User

we have upgrade our BW from 3.1 to BI 7.0. Now we are testing and detect that Queries which are started by User who has user specific roles (not SAP_ALL like we as developer) this Selection Screen is missing. This leads to a complete selection of all data of the cube and this leads to very long runtime or auto logout.
What is wrong in our configuration?
Has anybody made the same experience ?
Thank You, Frank HInzmann
Schindler Informatik Ebikon (Switzerland)

Frank,
Any chance that somehow that user has set personalisation on all the variable values?
Regards
Gill

Similar Messages

Not getting BI query variable selection screen for few test users

Hi,
i am having problem when i am executing the reports. i am not getting variable screen for the test users ID's. but i am getting the screen when when 0BI_ALL authorization selected.
i want role based authorization, and not complete authorization.
the parameters in su01 are scl(X) and wlc(X X XX X)
Thanks,

Can you please check into Infoobject Maintenance screen in Bex Tab i.e. Query Execution Filter Value Selection. assign "Values from Masterdata Table".
Try again and let me know.
Nagesh Ganisetti.

Missing selection screen for Bex Application iView

Hi,
I have configured a Bex Application iView, for which I am able to see the selection screen in preview but when I attach this to workset and try to open it in portal, the report is displayed directly with out selection screen.
Here are the steps I did
1. Created Bex Application iView with provied query string.
2. Assigned this iView to Page.
3. Attached this page to workset and then to role.
4. Login to the portal for respective user to see the report.
5. When I click on the link for the report, the selection screen is bypassed and the report is displayed directly.
Note: I was able to see the selection screen in preview for both Page and iView.
Could anyone through light on this problem.
Regards,
Ravi.

Frank,
Any chance that somehow that user has set personalisation on all the variable values?
Regards
Gill

Macro not working in BEx Analyzer (Refresh selection Screen)

Hi All,
We have migrated work book for 3.x to 7.x and work book having lot of macros calculated and using multiple quires in single work books for inpt selection screen written Macro same macro is not working after Migration to 7.x
7.X Macro code below..
Sub BW_Prod_Year_Summary()
Run "BExAnalyzer.xla!SAPBEXrefresh", False, Range("E9")
End Sub
Sub BW_Prod_Year_Summary_Period()
Run "BExAnalyzer.xla!SAPBEXrefresh", False, Range("G9")
End Sub
Sub BW_Query_for_YTD_and_Monthly_View()
Run "BExAnalyzer.xla!SAPBEXrefresh", False, Range("J9")
End Sub
Sub BW_Prod_Perform_prev_month()
Run "BExAnalyzer.xla!SAPBEXrefresh", False, Range("M9")
End Sub
Sub BW_Prod_Perform_prev_month_Detail()
Run "BExAnalyzer.xla!SAPBEXrefresh", False, Range("P9")
End Sub
Sub BW_3_Months_Volume_Comparison()
Run "BExAnalyzer.xla!SAPBEXrefresh", False, Range("S9")
End Sub
Sub BW_Query_for_Current_RE()
Run "BExAnalyzer.xla!SAPBEXrefresh", False, Range("E40")
End Sub
Sub BW_Query_for_Previous_RE()
Run "BExAnalyzer.xla!SAPBEXrefresh", False, Range("G40")
End Sub
Sub BW_Query_for_Business_Plan_this_year()
Run "BExAnalyzer.xla!SAPBEXrefresh", False, Range("J40")
End Sub
Sub BW_Query_for_Actuals_last_year()
Run "BExAnalyzer.xla!SAPBEXrefresh", False, Range("M40")
End Sub
Sub BW_Query_for_Forecast_next_year()
Run "BExAnalyzer.xla!SAPBEXrefresh", False, Range("P40")
End Sub
Sub BW_Query_for_Forecast_Accuracy()
Run "BExAnalyzer.xla!SAPBEXrefresh", False, Range("S40")
End Sub
Sub BW_PDR()
Run "BExAnalyzer.xla!SAPBEXrefresh", False, Range("E132")
End Sub
Sub BW_SDR()
Run "BExAnalyzer.xla!SAPBEXrefresh", False, Range("G132")
End Sub
Sub BW_TDQ()
Run "BExAnalyzer.xla!SAPBEXrefresh", False, Range("J132")
End Sub
Sub BW_SSDR()
Run "BExAnalyzer.xla!SAPBEXrefresh", False, Range("M132")
End Sub
Sub BW_DDR()
Run "BExAnalyzer.xla!SAPBEXrefresh", False, Range("P132")
End Sub
Sub BW_Blocked_Stock()
Run "BExAnalyzer.xla!SAPBEXrefresh", False, Range("E195")
End Sub
Sub BW_Age_of_Stock()
Run "BExAnalyzer.xla!SAPBEXrefresh", False, Range("G195")
End Sub
Sub BW_Historical_WOS()
Run "BExAnalyzer.xla!SAPBEXrefresh", False, Range("J195")
End Sub
Sub BW_Current_WOS()
Run "BExAnalyzer.xla!SAPBEXrefresh", False, Range("M195")
End Sub
Sub BW_Current_WOS_Details()
Run "BExAnalyzer.xla!SAPBEXrefresh", False, Range("P195")
End Sub
Sub BW_Historical_STO()
Run "BExAnalyzer.xla!SAPBEXrefresh", False, Range("E243")
End Sub
Sub BW_Future_STO()
Run "BExAnalyzer.xla!SAPBEXrefresh", False, Range("G243")
End Sub
Sub BW_Product_Groups()
Run "BExAnalyzer.xla!SAPBEXrefresh", False, Range("J243")
End Sub
Please help me on this..!!
Thanks
Prakash

Aglukas,
Thanks again. I understand the name of the Macro can be anything and this is how to create the Macro:
1) Run workbook, the query result display on the screen.
2) In Excel 2007, I click on Developer tab ->Macro.
3) Enter Macro name (Macro1) and click on Create button.
4) I have VB editor open with following:
Sub Macro1()
End Sub
5) So added the following code to Macro routine in VBA Module:
Sub Macro1()
With ThisWorkbook.Sheets("Sheet1")
Stop
.Activate
.Cells(15, 1).Interior.Color = RGB(220, 254, 250)
End With
End Sub
6) I then added the Macro1 to Workbook Setting ->Exit tab, and click on Add Macro button.
When I run/refresh the workbook, I didn't get into debug mode at all!!!
What is wrong in above steps?
Please advice, thanks.

BEx web report selection screen entries retain when closing and opening the report again

Hello all,
please help me in the below query.
Till last month the entries we made in BEx web report selection screen are retained in the selection screen even when we close the web report and open it again from portal without logging off. But recently this functionality is missing and the entries in selection screen are not remembered when we close and open the same report again. It is a good feature for the users. Have you come across this issue?

No...I think i can reframe the question very clearly......For ex: we are opening a Bex Web report...so initally we would be prompted by the variable selection screen...in which we have to give the entries(Values) for those variables like Cal month, Sales org, Company code, etc.....Later on the report will get open based on the values we have given......
Now if we close the particular report without logging off then if i try to open the same report that selected values are missing.....earlier it used to remember the values we have given until we log off....But now that functionality is missing....It was very useful feature.....Can you please tel me what can be done to resolve this??
I hope the explanation would be clear now.

Selection screen in Non-EDIT mode

Hi all,
I have a selection screen in which the user wants a field to be in Non-EDIT mode. How to do it?
PARAMETERS : s_vkorg like vbrk-vkorg default '1000'.
(The above parameter shud be in non-editable mode)
select-options : s_vtweg for vbrk-vtweg.
select-options : s_spart for vbrk-spart.
Pls reply.
Thanks in advance.
Vijay

Vijay,
Use the code below.
REPORT zscreen.
TABLES: vbrk.
SELECT-OPTIONS : s_vtweg FOR vbrk-vtweg MODIF ID mo1.
SELECT-OPTIONS : s_spart FOR vbrk-spart MODIF ID mo1.
* At selection Screen Output Event
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF screen-group1 = 'MO1'.
      screen-input = 0.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.

Modify selection screen for Logical Database 'SDF'

Hi
I need to make a section of the standard selection screen for logical database 'SDF' invisible. I have tried the differet selection screen options of the report attributes, but none of the provided ones give me what I want.
How can I find the name of the screen group for the "Line Item Selection" block of the selection screen so that I can make it invisible when the selection screen is displayed?
Thanks,
Thomas

I tried to do this:
Loop at screen.
         if   screen-group4 = '026'
           or screen-group4 = '027'
           or screen-group4 = '028'.
             screen-invisible = 1.
             modify screen.
         endif.
endloop.
This removed the selection text for these fields, but the Line Item Selection block is still visible, and the actual input fields are also visible. They now look like password input fields with all ***** in them.
What am I doing wrong?
Thanks for your help!
Thomas

Cannot enter value in selection screen for Hierarchy variable.

Hi All,
I have a hierarchy variable on the selection screen for Org unit.
When i execute the report via Bex or RSRT i am able to enter the value directly into the selection screen input field without going for F4 help and then selecting the value.
But when the same query is used in web template and executed the input field for the variable on the selection screen is greyed out and doesnt allow to type in the value. Only way to fill in the value is via F4 help.
Can anyone tell why is this happening and is there any way this can be changed?
Thanks in advance.
-RJ

Hi Prakash,
I am not able to select or click on the input field of the selection screen before and after selecting the value
CTRL+K doesnt work for me.
The display field is populated only when i select a node from the F4 help screen.
When executed from RSRT the field is highlighted and i am able to enter the value unlike when executed on web browser.
The variable is Mandatory multiple single value readu for input.
I found an article saying that for hierarchy node variables the values are forced by F4 value help as the values that are entered manually might not be unique.
This is the link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/15839190-0201-0010-adb1-d2edd9857b0a
I would like to know if there is a work around or setting that can be made to make it work?
-RJ

How to define our own selection screen for logical database in abap-hr?

Hi Friends,
Can u please help me
How to define your own selection screens for logical database.
we use to do like(goto->attributes-HRReportcatagerious ).but How to desin using customer table like t599c, t599f and how to add to my logical database?
Thanks in advance
charan

check out this online help
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/dba65c35c111d1829f0000e829fbfe/frameset.htm
Regards
Raja

How to get One Selection Screen for all queries?

Hi Experts,
I have three queries having selection screens. All the selection screen have the same variables, but the reports are different.
I have created a workbook having these three queries. Each time when the workbook opens, the three selection screen pops up one after the another. Same values are entered in all the selection screens.
Now the user wants only one selection screen for all the three reports. Is it possible? I tried but I do not see any way.
I think there should be some way of getting it done.
Waiting for your inputs,
With kind regards,
Shreeem

Hi
If a workbook contains multiple queries that use the same variable, you are prompted to enter the variable values again for each query. To avoid this, set the Display Duplicate Variables Only Once flag.
Goto Workbook Settings>Under Variables Tab>select Display Duplicate Variables only Once
http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/54/a493f7256b43698191a2623e5a0532/frameset.htm
Hope this helps,
Aparna Duvvuri

Define selection screen for ldb_process

Hi I'm using the call function ldb_process for KDF(lfa1, lfb1, bsik), the trouble is that the information its different than if i do it on a normal report defining the logical database kdf and selection screen 903.
I find that the difference is because the selection screen, this is because the default selection screen for the kdf database is 1000, and this selection has the "Open items at key date" selection with the current date.
The question is:
How can i define the selection screen 903 using the call function ldb_proces?
Thanks
Pablo Santos

Hi,
You cannot define screen version 903 using function LDB_PROCESS. Instead use table "SELECTIONS" of the function module .
Cheers.

Layout Option on Selection Screen For Zreport

Hi All,
Plz explain how to do coding for using Layout option on selection screen of
report. Also i should be able to save and create new layout on selection screen.
Thnaks in advance.
Aniket Dayama

hi,
creation of sub-screens.
selection-screen begin of tabbed block <name of the tab> for < height of the tab in no's> lines.
eg;
selection-screen tab(20) l1 <data element> user-comand <name of the funcion code>
selection-screen end of block <name of the tab strip>.
eg;
selection-screen begin of tabbed block mytab for 10 lines.
selection-screen tab(20) l1 user-command tab1.
selection-screen tab (20) l2 user-command tab2..
selection-screen end of block mytab.
Under initialization.
data element = text-01.
data element = text=02.
How to initialize the tab with default screen.
<name of the tab> - prog = sy-repid.
<name of the tab>- dynnr = '<subscreen no>'.
<nane of the tab>-activetab = '<user-command for the strip>
if this has solved ur problem then dont forget to reward with points.
with regards,
madhuri.

Change Layout in Selection Screen for OO ALV-Grid

Hello everyone,
I got a problem regarding layouts for objectoriented ALV Grid. I want to make it possible that user can take the layout for ALV he wants to on the selection screen. So far thats no problem and it works. But there are some little problems which I do not know how to fix them. But first the facts:
(1) I got my parameter for layout
PARAMETER: p_vari TYPE disvariant-variant.
(2) I fill my global layout structure in initialization
INITIALIZATION.
* Variante vorbelegen
   gs_variant-username = sy-uname.
   gs_variant-report   = sy-repid.
* Layout holen
   CALL FUNCTION 'LVC_VARIANT_DEFAULT_GET'
     EXPORTING
       i_save        = 'A'
     CHANGING
       cs_variant    = gs_variant
     EXCEPTIONS
       wrong_input   = 1
       not_found     = 2
       program_error = 3
       OTHERS        = 4.
   IF sy-subrc = 0.
     p_vari = gs_variant-variant.
   ENDIF.
(3) I got my handling for F4-value help on variant parameter
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
   CALL FUNCTION 'LVC_VARIANT_F4'
     EXPORTING
       is_variant    = gs_variant
       i_save        = 'A'
     IMPORTING
       es_variant    = gs_variant
     EXCEPTIONS
       not_found     = 1
       program_error = 2
       OTHERS        = 3.
   IF sy-subrc <> 0.
     MESSAGE text-m01 TYPE 'S'.
   ELSE.
     p_vari = gs_variant-variant.
   ENDIF.
(4) I give back my parameters content into the variant structure at start of selection
START-OF-SELECTION.
   gs_variant-username = sy-uname.
   gs_variant-report   = sy-repid.
   gs_variant-variant = p_vari.
This works all fine but I got some problems when using default variants/layouts. For example I got a default variant only for me. When starting the selection screen it works fine that the default layout was written. It is displayed automatically in the variant parameter. But I want that if i I empty the content (blank it out) from my variant parameter, that report should start with "normal" layout how it was written in the report and NOT with default layout.
When I clear the gs_variant it works like I want it, but then the alv layout button looks like (without functions for layout), because I do not have the reference to my report.
So what to do? :-)
Regards
Michael

Wow that was fast, works great, thanks :-)
I did not use this parameter in set table method but now I fill it dynamically.
Ok next problem, one step harder ;-)
Now I have one selection screen for one ALV-Grid, but four radio buttons which control with which data the ALV gets filled (four different fieldcats, data tables and so on). Each Grid got an own HANDLE so that the layouts can be separated in four categories.
Now I want that by changing the radio button the individual standard layout for the chosen alv grid is getting filled.
This works fine when using it in selection screen output.
AT SELECTION-SCREEN OUTPUT.
   CLEAR gs_variant.
* Layout-Handles individuell für Klausel-Radiobuttons setzen
   IF     p_py IS NOT INITIAL.
     gs_variant-username = sy-uname.
     gs_variant-report   = sy-repid.
     gs_variant-handle   = 'KLPY'.
   ELSEIF p_rh IS NOT INITIAL.
     gs_variant-username = sy-uname.
     gs_variant-report   = sy-repid.
     gs_variant-handle   = 'KLRH'.
   ELSEIF p_aj IS NOT INITIAL.
     gs_variant-username = sy-uname.
     gs_variant-report   = sy-repid.
     gs_variant-handle   = 'KLAJ'.
   ELSEIF p_sr IS NOT INITIAL.
     gs_variant-username = sy-uname.
     gs_variant-report   = sy-repid.
     gs_variant-handle   = 'KLSR'.
   ENDIF.
* Layout holen
   CALL FUNCTION 'LVC_VARIANT_DEFAULT_GET'
     EXPORTING
       i_save        = 'A'
     CHANGING
       cs_variant    = gs_variant
     EXCEPTIONS
       wrong_input   = 1
       not_found     = 2
       program_error = 3
       OTHERS        = 4.
   IF sy-subrc = 0.
     p_vari = gs_variant-variant.
   ELSE.
     CLEAR p_vari.
   ENDIF.
But unfortunately selection screen output is getting passed by EACH changing in the selection screen. This means when I try to clear the default layout in my parameter field, it gets refilled automatically with default layout. If I do a condition around the filling (only if not initial) the default value filling does not work fine in every case, e.g. when clearing the parameters field and then change the radiobutton -> then it does not get filled automatically.

I received a notice that there is an update for my Lightroom 5. I have the non-creative cloud version. Is the update available for non-cloud users? It says to download click the link and it takes me to Cloud free trial screen.

I received a notice that there is an update for my Lightroom 5. I have the non-creative cloud version. Is the update available for non-cloud users? It says to download click the link and it takes me to Cloud free trial screen.

It is the same installer. You can run it as 30-days trial (CC version) and decide later for CC or stand-alone. To license as stand-alone, follow this guide.
If you already have the LR6 license key, you can enter it during setup and do not need to follow the guide.

Selection Screen for crystal report ?

Hi to all,
Is it possible to create selection screen using Crystal report designer alone ?
I came to know that we can give selection parameteres using SELECT EXPERT option in desginer.
Can we create selection screen for user input like we have in abab (selection screen) ?.
Is it possible to check authorization using Crystal report designer ?
If anyone knows anything .... remotely connected with the question I asked please reply.
Waiting for reply.
Regards,
Surya.

Surya,
To do what you are wanting, you will want to do the following:
1) Create parameters. Open the Field Explorer > right click Parameter Fields > fill in the necessary fields o create the desired parameter.
2) Add the parameter to the Select Expert.
2a) If you are using a SQL Command to generate your data set you will need to add the parameter name to the Parameter List of the Command and add it the selection criteria of the SQL statement.
Something like this:
WHERE f.FieldName = {?ParameterName}
HTH,
Jason

BEx Analyzer : missing Selection screen for NON- SAP_ALL User

Similar Messages

Maybe you are looking for