Bex variable value manipulation in the customer exit

Hello Experts - I have a situation where I need to manipulate the value of a variable in the customer exit based on certain conditions. I have a customer class variable defined in the query with the processing by Manual Input/Default Value. I need to restrict the values that this variable gets based on values that are selected for another variable (division). For example if the division value is 01, class variable can not have value 'CB'. Any ideas how this can be accomplished. Any input will be appreciated.
Rgds,
Venu.

Mansi & Guy - Thanks for your input. The query is not used interactively and it is used as dashboard query in VC for which the variables are fed via Adobe Flex application. In detail here is my requirement -
Division is a mandatory field that is selected on the dashboard (You can think this for query)
Class is a Optional field (users have option to select multiple values).
If the users choose particular division (say in my case 04) and not any Class, at the query level, I want to exclude CB which I can do it in i_step3 logic.
In case if the user selects any class, I want to skip the logic of exclusion in the i_step3 (This is because, I can restrict the user what class they can pick based on the Division they choose, so the i_step3 logic wouldn't be required in this case).
Basically, I do not want to raise messages and this needs to handled based on user selections.
Appreciate your help,
Venu.
Edited by: Venu on Sep 14, 2009 10:03 PM

Similar Messages

Variables coding for replacement path customer exit

i have to look up values in query for restricted keyfigure ..
the values are stored in an ods table as below, as the values changes often during the year.:
zdate123.......value1.....value2
1/1/10............90..............91
1/2/10............94..............87
in a query i have to grab all the data for Value1 for different dates,
so i created a variable ZVAR_VALUE1
and write the customer exit for it as below
    DATA: l_s_table TYPE /BIC/AZODS00.
    data: l_s_range_low,    l_s_range,    l_s_range_sign,    l_s_range_opt.
    DATA: v_today type sy-datum.
    v_today = sy-datum.
CASE i_vnam.
WHEN 'ZVAR_VALUE1'.
    IF i_step = 1.
      CLEAR L_S_RANGE.
      SELECT SINGLE /BIC/ZVALUE1 INTO l_s_range FROM /BIC/AZODS00
      WHERE /BIC/ZDATE123 EQ v_today.
      APPEND l_s_range TO e_t_range.
    ENDIF.
this gives error
WInitial RANGE-OPT for customer exit variable zvar_value1 is corrected..
Error for variable zvar_value1...
i tried replace variable with query but i cannot use it in restricted keyfigure as it gives error...variable cannot be used in structure
can anybody help correct the code??

thank you
    DATA: l_s_range TYPE rsr_s_rangesid.
and it works
but now in query outpu t the value comes up as 0.00 for everything
this is my code exactly as below
ATA: l_s_table TYPE /BIC/AZODS00.
DATA: v_today type sy-datum.
v_today = sy-datum.
CASE i_vnam.
WHEN 'ZVAR_VALUE1'.
IF i_step = 1.
CLEAR L_S_RANGE.
SELECT SINGLE /BIC/ZVALUE1 INTO l_s_range FROM /BIC/AZODS00
WHERE /BIC/ZDATE123 EQ v_today.
l_s_range-low = l_s_table-/BIC/ZVALUE1 .
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
ENDIF.
and there exist the value for today for Value1 in ods

Problem in transporting the Customer exit variable

Hi all,
i have careated a variable to capture the current date in my report, with the processing type, Customer Exit. and, its getting populated fine in my DEV environment. basically, i have to compute the number of days, in which net due date is being compared to the current date. when i transport this to the QA environment, the values for number of days is gettting some junk value, wherein in DEV its showing the exact values. It seems i have to take cetain measures in transportation of the Customer Exit.
please advice.
Thanks in advance
Sneel

Hello ,
In the Quality after you run the report check in the layout option>display text elements> variables and check what value is displayed for the use exit variable , if it is correct then problem may be in the selection you gave when you run the report if the user exit variable value is wrong , then set a break point in the code and run the report from rsrt and check where the error is.
hope it is clear
assign points if useful

How to find out the customer exit and sap exit variables created provider?

Hi all,
How to identify what are all the customer exit and sap exit variables are been created for an info provider. is there any tables which allow us to find out.
thanxs
haritha

Hello haritha,
SAP Exit and Customer Exit variables are created for Characteristics and not for individual InfoProviders.
So whenever the characteristic is used in the InfoProvider, by selection the appropriate variable the exit can be called.
So the same Exit can be in one or more InfoProviders.
Hope it helps.
Thanks,
Chandran

Looking for an ABAP-code for the customer-Exit Variable

Hello,
I have defined a Variable (Interval) which should be processed through Customer-Exit on characteristic Supplier-Date (date format). This Customer-Exit Variable is called ZDATE.
We have another time characteristic Fiscal year / period (0FISCPER) which has single mandatory input variable for ex. 003.2011. This input variable is called ZFISCPER.
Now I have to write an ABAP-Code where the customer exit variable ZDATE is derived (fiscal last year to last period) from input variable ZFISCPER in INCLUDE ZXRSRU01.
Means when the input variable (ZFISCPER) is 003.2011 then the customer exit variable ZDATE should be calculated in INCLUDE ZXRSRU01 as 01.01.2010 u2013 28.02.2011 (fiscal last year to last period).
Since I am quite new in ABAP, I will be grateful if you could write me sample ABAP for this.
Many thanks.

Hi,
should be something like:
DATA: l_s_range TYPE rsr_s_rangesid,
input LIKE sy-datum.
When 'ZDATE'
CONCATENATE '0101' 0FISCPER+3(4)-1 into l_s_range-low. "You get 01012010
CONCATENATE '01' Fiscper+1(6) into input. "You get 01032011
l_s_range-high = input-1. "You get 28022011
APPEND l_s_range TO e_t_range.
Greetings
Roman

How do I use the Exclude in the customer exit

I have to create a customer variable which will be passed back to the program and used for an exclusion. the user enters company codes and this passes into the user exit. In the exit i need to just place and S in from of then and these need to be used to exclude data. I tried restricting the variable in the query but it doesn't allow me to exclude. How do i accomplish this?

Hi MICK,
If you want to write code in customer exit and exclude some values for the variable in query,note the following things
- l_s_range-sign = 'E'.
Here 'E' means exclude
- Create the variable with OPTIONAL
Otherwise your customer exit won't work
Hope this helps.
Assign points if helpful
Regards,
Aaron Wang

How to use Multiple Single Option for selection in the Customer Exit

Hi,
How can we handle the multiple single values in the customer exit variable.
I have a requirement which is as follows -
Table A fiields -> Field Coach, Partner 2, Relation between PArtner 1 & Partner 2, Valid from, valid to date.
Table B -> Service Month, Start Date, End Date.
Table C -> Billing Date, Execution Partner,cal month /year.
For the Field coach in TABLE A, multiple Partner 2 are present.
Report has to be built on Table C.
User inputs the Service month and Field Coach . User can enter multiple field coach values.
For the All the Field Coach values entered, corresponding Partner2's have to be found from Table A and to be passed to the Execution Partner in Table C.
Now if we want to use customer exit variable on the field Execution Partner, how can we handle the Multiple Single selections in the customer exit.
Thanks,
Shubham

Hi,
While creating the variable you must have to specify multiple value.
In customer exit
write code multiple times and append the values.
For example:
when 'variable'.
l_s_range - sign = 'I'.
l_s_range - OPT = 'EQ.
l_s_range - LOW = EXECUTION PARTNER 1.
APPEND L_S_RANGE TO E_T_RANGE.
l_s_range - sign = 'I'.
l_s_range - OPT = 'EQ.
l_s_range - LOW = EXECUTION PARTNER 2.
APPEND L_S_RANGE TO E_T_RANGE.
l_s_range - sign = 'I'.
l_s_range - OPT = 'EQ.
l_s_range - LOW = EXECUTION PARTNER 3.
APPEND L_S_RANGE TO E_T_RANGE.
Regards,
Ranganath.

BW Authorizations - Query variable with processing mode as "customer exit"

Hi,
Iam new to BW authorizations and have not yet worked on customer exit before. I was going through the documentation at various sites but I could not get the end to end description on how the query process( when using a variable for an InfoObject) works in case of customer exit.
Let's assume that I am using a query variable with processing mode as "customer exit" and at the exit I write some code to extract user's authorizations from a z table. if this is the case, then when an end user runs a query,how will the the system know what value needs to be filled in the variable for the requesting user. Are the user details also sent to the code along with the query variable? If so how. If I mis-understood the process then forgive me and let me know the correct process.

Hi!
welcome to SDN!
customer exit variables need programing by user. so if you create a customer exit variable, you got to right a program which extracts values into this variable. we can do what ever we want in program, SAP will not deal anything ´with customer exits.
with regards
ashwin
PS n: Assigning point to the helpful answers is the way of saying thanks in SDN. you can assign points by clicking on the appropriate radio button displayed next to the answers for your question. yellow for 2, green for 6 points(2)and blue for 10 points and to close the question and marked as problem solved. closing the threads which has a solution will help the members to deal with open issues with out wasting time on problems which has a solution and also to the people who encounter the same porblem in future. This is just to give you information as you are a new user.

How to find the customer exits for a particular transaction

hi
how to find the customer exits for a particular transaction

Hi jyothsna vankadari ,
ther is a convenient way to find all BADIS called. You may know that BADIS are the newer version of EXITs.
I would suggest you to go for BADI.
Follow the below steps to find out what all BADI's are called when you press any button in any transaction.
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction.
Regards,
Clemens

Variable creation in bw with customer exit

hi experts,
how to create a variable in bw with customer exit?

Hi
Create a variable with Processing type as customer exit.
Then Go to Se38 and ZXRSRU01 program in change mode and there you write the necessary coding how your customer exit variable should process.
else you can access the include function via CMOD also with selecting the enhancement for reports.
Regards
RaM

Formula date variable ,which is processing by 'Customer exit' with ready in

Hi ,
I need to create 1 variable which takes date from user and do some calculation.irrespective of any date char.
so I have created Formula date variable ,which is processing by 'Customer exit' with ready input .
But when selection screen pop up date formula variable comes with the format yyyymmdd.
but i need dd.mm.yyyy. i have checked my profile and it is dd.mm.yyyy.
Waitin for reply

Hi Babu
Did you get the answer to the query....if yes please drop me a mail on this as I have the same requirement and thanks in advance...
my id [email protected]
REgards
Amit

Change Bex Variable Value every time refresh query!

I'm looking for solution at this problem:
1) I've create a formula variable
2) I've assign to this variable a value in EXIT_SAPLRRS0_001 (step 2)
3) When run my query it's OK but the value of my variable is static!!
The problem is to change variable value every time the user change a filter like when do "Select Filter Value"...
How can I do this?

I know step 2 and this step is usefull for the first valorization of variable
but, for example, if I run the query with initial filter and after, in the navigation, I restrict the filter using "Keep Filter Value" on a single value of one characteristic the system doesn't execute the SAP EXIT and variable is the same of the first initial value...
I need a SAP EXIT or anything like it for change Formula Variable Value every time I change any filter during the query navigation.

Re: Passing Bex variable values to javascript in WAD 7.0

Hi,
Is there any possibility to pass a Bex variable value to the java script in WAD 7.0 so that i can create a pop up and display the value.
I found a post explaining its possibility in WAD 3.5. but i am not able to find how it can be done in WAD 7.0
Any inputs will help.
Regards.
Shafi

Hi Shafi...
Yes it can be done. Insert a Dataprovier Information Item and a Script Item with a code for querying the xml island that provide the infomation you need. I hope this helps. If you need help with the code let me know.
Edited by: Alvaro Wilfrido Lozada Borrero on Dec 28, 2009 8:44 PM

How to do coding in the customer exit

Hi I have found the customer exit by finding "Call function Exit" in the program. Now my question is how to do coding for that exit as I can not enter it directly in CMOD.

Hi Suchender,
in TA CMOD you first have to create a Z- project. Then assign an enhancement.
The assigned enhancement offers one or more components. After assigning the enhamcement,
display the components. in case enhancemnet is a function exit simply double click it and you will navigate
to function builder. there you will find an include, where you can place your coding.
regards
rea

Code (ABAP) for the Customer Exit Variable (CMOD)

Scenario
An employee can purchase any no of policies in a day or month.each policy will have start date and expiry date.
My requirment
Count all the policies(valid) by employee on a ranges basis exception reporting
(0-10;10-20;20-30;30-40) and then able to drill down by policy start date and expiry date.
As per the requirment is to show policies that employee had with in the give date intreval which are not yet expired (active) i need to write a condition that will count only policies whose Expiry date is > Current calender day
As Policy Expiry Date is a char i am converting it to KF using fourmala variable so that i can write a condition on it using current cal day formula variable sap exit
Requirment:
Need a code for SAP exit variable which will meet the following requirment
There are the following 2 variables in the query
1) A variable (User Input)(Date Range) on Policy Start Date and
2) Authorisation Variable which is based on Authorisation Object(Analysis Authorisations)
I need a SAP Exit variable (CMOD) that will
BAsed on the user entered Policy Start date it has to pick all the policy exiry date of the policies and display all the policies whose expiry date is greate than Sy Date (Current Date) and also if Policy Expiry Date is blank or # it has to display
Arun supplied me with the below code...but i think it doesn't include blank expiry date or #...as i am new to ABAP please update me with releavent code
Policy Start Date : ZPST_DTE
Policy Expiry Date: ZPSP_DTE
Variable (Type:Customer Exit) on Expiry Date: ZEEXP_DTE
Arun's Code:
IF I_STEP = 1.
CASE V_NAME
WHEN 'X' " X is the variable u created for the exit
l_s_range-low = SY-DATUM.
l_s_range-opt = 'I'.
l_s_range-sign = 'GT'.
APPEND l_s_range TO e_t_range.
END CASE.
Please modify above code to include Blank or # values of Expiry Date
Thanks Arun
Please ask if you need further info as this is urgent
Thanks

Hi Arun,
Thanks for the help...will definetly assign points
(Closed the previous thread)
Please spare bit of ur time as this is my first ABAP Code
Can i include 2 restrictions..# and Variable (Customer Exit)...But how can i include Records with Blank Values
As the data from Source system the expiry date is filled up with either Date or # or Blank...my requiorment is to include all 3 and
Question:
As there are 2 other variables defined ..one on Policy Start Date (User input date intreval) and Location (Authorization Variable..Analysis Authorisations)...Do i need to change I_STEP in the code
(Req: Reports shows all the(still valid) policies emp has purchased between 2 give date (Variable on Policy Start date)
IF I_STEP = 1.
CASE V_NAME
WHEN 'X' " X is the variable u created for the exit
l_s_range-low = SY-DATUM.
l_s_range-opt = 'I'.
l_s_range-sign = 'GT'.
APPEND l_s_range TO e_t_range.
END CASE.

Bex variable value manipulation in the customer exit

Similar Messages

Maybe you are looking for