Variable creation in bw with customer exit

hi experts,
how to create a variable in bw with customer exit?

Hi
Create a variable with Processing type as customer exit.
Then Go to Se38 and ZXRSRU01 program in change mode and there you write the necessary coding how your customer exit variable should process.
else you can access the include function via CMOD also with selecting the enhancement for reports.
Regards
RaM

Similar Messages

Formel Variable - how to fill with Customer Exit from control table

Hello Experts,
I have create in BEx-Analyser a formel Variable ZEXRATE1 filled through Customer Exit. In BW I had a "control tabel" with keyfigures.
In the query definition I have include 0FISCPER, 0FISCVARNT and 0VTYPE. This
are the keys which should give the values for the selectstatement to select my keyfigure from the "control table" to fill ZEXRATE1.
If it possible to do with Customer Exit (CMOD -> RSR00001 -> ZXRSRU01) or do I have to implement a Bapi. Perhaps someone can give me a code example.
Regards Dieter

Hi,
Code may look like this
WHEN 'ZEXRATE1'.
check i_step = 2.
    LOOP AT I_T_VAR_RANGE INTO L_S_RANGE.
      CASE L_S_RANGE-IOBJNM.
        WHEN 'ZFISCPER'. GV_ZFISCPER = L_S_RANGE-LOW.
        WHEN 'ZFISCVARNT'. GV_ZFISCVARNT = L_S_RANGE-LOW.
        WHEN 'ZVTYPE'. GV_ZVTYPE = L_S_RANGE-LOW.
      ENDCASE.
    ENDLOOP.
    SELECT SINGLE RATE into INTO GV_RATE
              FROM ZTABLE
              WHERE 0FISCPER = GV_ZFISCPER
              AND   0FISCVARNT = GV_ZFISCVARNT
             AND 0VTYPE = GV_ZVTYPE   .
Assumptions : ZTABLE name of control table
                      ZFISCPER name of variable represents fiscal period
                      'ZFISCVARNT' name of variable representing fiscal year variant
                      'ZVTYPE'. name of variable representing value type
Hope that helps.
Regards
Mr Kapadia
Assigning points is the way to say thanks in SDN.

Prob in text variable with customer exit

Hi to all
I am working in PA module in HR ,In my Report i have to count total number of trainee and lateral in given Date range that From date to To Date , Before that i have to calculate a Total Employee Strength before one day of From date , suppose user enter a 1st of April 2007 to 1st of jun 2007 , so Employee strength should be calculated on the 31march 2007, for that i have written custome exit , now i am getting a value also , for Display that date have a created a text variable with customer exit , but i am not able to get that date , it should be display strength as on 31march2007 , instead of it is displaying Strength as on 00.00.0000.I am giving a cod also
ls_range-sign ='I'.
ls_range-opt = 'EQ'.
ls_range-low = 'EB1A'.
append LS_Range to e_t_range.
WHEN 'ZPA_DATE'.
if i_step = 3.
READ TABLE I_T_VAR_RANGE INTO L_S_VAR_RANGE WITH KEY VNAM = 'ZPA_DATE'.
IF SY-SUBRC = 0.
ZTEST = L_S_VAR_RANGE-LOW.
ztest1 = ZTEST - 1.
export p = ztest1 to MEMORY ID 'VALUE'.
ENDIF.
endif.
WHEN 'ZFRMDAT'.
if i_step = 3.
ls_range-sign ='I'.
ls_range-opt = 'EQ'.
ls_range-low = ztest.
append LS_Range to e_t_range.
endif.
when 'ZPA_CDAT'.
if i_step = 3.
ztest1 = ztest - 1.
ls_range-sign ='I'.
ls_range-opt = 'EQ'.
ls_range-low = ztest1.
append LS_Range to e_t_range.
endif.
when 'ZPA_VAR3'.
if i_step = 3.
ztest1 = ztest - 1.
import p = ztest1 from memory id 'VALUE'.
concatenate ztest16(2) ztest14(2) ztest1+0(4) into date separated by '.'.
move date to temp.
move 'Hello' to temp.
ls_range-sign ='I'.
ls_range-opt = 'EQ'.
ls_range-low = temp.
append LS_Range to e_t_range.
endif.
Please help me to come out
Thanks

Hi Stefania,
to me it looks like your local variable num_mese is not defined with the correct data type.
Try to change
if num_mese = 09 to if num_mese = '09',
same for 10 -> '10', 11 -> '11'.
If that does not help please let me know your coding where you define the type of num_mese (DATA statement).
Regards
Stephan

Formula Variable with customer exit

Hi,
can we use Formula variables with customer exit based on characteristics(ex Bill date)? if yes, can you guys help me on this.
Thanks
kri

Yes , you can use a formula variable with customer exit based on characteristics .
Depends on the requirement what you want to show in the formula variable ,
Eg : if you want to show the max fiscal year period , in that case :
create a new formula in the keyfigure section of your query , go to edit , you can see formula variable below the keyfigures ,
right click on the same and create new formula variable :
Write the code for the formula varible in the backend as we do for normal customer exit varaible :
for this e.g the code will be :
FORM get_variable_value
      tables E_T_RANGE      type RSR_T_RANGESID
      using I_VNAM          type RSZGLOBV-VNAM
            I_VARTYP        type RSZGLOBV-VARTYP
            I_IOBJNM        type RSZGLOBV-IOBJNM
            I_S_COB_PRO     type RSD_S_COB_PRO
            I_S_RKB1D       type RSR_S_RKB1D
            I_PERIV         type RRO01_S_RKB1F-PERIV
            I_T_VAR_RANGE   type RRS0_T_VAR_RANGE
            I_STEP          type I.
DATA L_S_RANGE LIKE LINE OF E_T_RANGE.
DATA loc_var_range LIKE rrrangeexit.
Data : l_inPer TYPE string.
IF i_step = 1.
Select min( distinct FISCPER )
        from /BIC/A(DSO name)
        into l_minper .
    l_s_range-sign = 'I'.
    l_s_range-opt = 'EQ'.
    l_s_range-low = l_minper .
    APPEND l_s_range TO e_t_range.
endif.
drag the formula variable in the new formula created and exexcute the query , you will be able to see the output .
This is just an example , your code will differ as per your requirement .

Formula date variable ,which is processing by 'Customer exit' with ready in

Hi ,
I need to create 1 variable which takes date from user and do some calculation.irrespective of any date char.
so I have created Formula date variable ,which is processing by 'Customer exit' with ready input .
But when selection screen pop up date formula variable comes with the format yyyymmdd.
but i need dd.mm.yyyy. i have checked my profile and it is dd.mm.yyyy.
Waitin for reply

Hi Babu
Did you get the answer to the query....if yes please drop me a mail on this as I have the same requirement and thanks in advance...
my id [email protected]
REgards
Amit

Authorization with customer exit variable (CP, BT, EQ)

Hi SDN-Experts,
I have a question concerning the new authorization concept.
I created an authorization for 0COSTCENTER which also contains the 3 special characters 0TCAACTVT, 0TCAIPROV and 0TCAVALID. I inserted a customer exit variable for 0COSTCENTER. The exit reads datasets from a db table which contains authorizations for the actual user. The authorizations have different formats, e.g. "1000", "1000;1200", "25*" etc.
The internal table e_t_range is filled as followed in the exit:
i   eq   1000
i   bt   1000   1200
i   cp   25*
This does not work. It works if I only use "eq" OR "cp". But not both at the same time.
How can I achieve to use the different authorizations in the db table for the bi authorization?
Thanks in advance...
Joerg

Hi Olivier.
Yes, the variable is defined as selection option and I did also try to use "EQ" instead of "CP".
I tested again with another variable which is "ready for input" and is not used in an authorization. The Variable is filled in the customer exit. This is the code:
WHEN 'ZJGR_COSTCTR_TEST'.
l_s_range-sign = 'I'.
l_s_range-opt = 'BT'.
l_s_range-low = '0000001000'.
l_s_range-high = '0000001200'.
APPEND l_s_range TO e_t_range.
l_s_range-sign = 'I'.
l_s_range-opt = 'CP'.
l_s_range-low = '0000002*'.
APPEND l_s_range TO e_t_range.
The result in the variable screen in BEx Analyzer is the following:
1000 - 1200;0000002*;
And it still does not work. It seems that you could not mix EQ, BT and CP. But this is exactly what I have to do with the authorization variable...
Do you have any other tipps that I might try out?
Thanks,
Joerg

Variable with customer exit

Hello,
I have created a query with customer exit variable.this variable calculates cumulative month from the beginning of the year. this variable depends on another regular variable 0PCALMON (single value, mandatory). i also use this variable in the query to show the month itself.
the problem is as follow:
until yesterday the 0PCALMON variable pop up normally, but now the variable doesn't pop up at all!
Does anyone have an idea?
Thanks,
Maya

Hi,
The variable may be personalized with some value.
To remove the personalization for a user:
Step 1: RSA1 -> Search for ODS 0PERS_VAR
Step 2: Manage -> Contents ->selective deletion
Step 3: Put the user to remove the personalization
http://help.sap.com/saphelp_nw04/helpdata/en/01/42c73c13b0ce5be10000000a114084/content.htm
Regards
Happy Tony

Characterstic variable with customer exit

Can u some bady help me.
How to express about Characterstic variable with customer exit
Edited by: chenna reddy on Aug 7, 2008 9:48 PM

Hi,
The variable may be personalized with some value.
To remove the personalization for a user:
Step 1: RSA1 -> Search for ODS 0PERS_VAR
Step 2: Manage -> Contents ->selective deletion
Step 3: Put the user to remove the personalization
http://help.sap.com/saphelp_nw04/helpdata/en/01/42c73c13b0ce5be10000000a114084/content.htm
Regards
Happy Tony

Hierchies and hierchies node with customer exit?

hi friends,
what scenerio we use hierchies and hierchies node variable with customer exit ?
Thanking u
suneel.

Hierarchy variables represent hierarchies. You can use them wherever
hierarchies can be selected.
Hierarchy node variables represent a node in a hierarchy. You can use them as
an alternative to hierarchy nodes as fixed values for restricting a characteristic.
If you use a hierarchy node variable, you can make selections by hierarchy
node when you use the query.
The Customer Exit processing type for variables enables you to determine
values for variables by means of a function module exit. The function
module used is EXIT_SAPLRRS0_001.
You create a project in transaction CMOD by selecting the SAP
enhancement RSR00001 and assigning this to the enhancement project.
Activate the project.
WHEN 'HIERARCHY'.   " Hierarchy variable
         CLEAR L_S_RANGE.
         L_S_RANGE-LOW = 'MY HIERARCHY'. " hierarchy name
         L_S_RANGE-SIGN = 'I'.
         L_S_RANGE-OPT = 'EQ'.
         APPEND L_S_RANGE TO E_T_RANGE.
-> Only dependents of hierarchy 'MY HIERARCHY'
      WHEN 'HNODE'.   " Hierarchy node variable
         CLEAR L_S_RANGE.
         L_S_RANGE-LOW = 'DEPT1'. " Node name
         L_S_RANGE-HIGH = '0HIER_NODE'.   " InfoObject
         L_S_RANGE-SIGN = 'I'.
         L_S_RANGE-OPT = 'EQ'.
         APPEND L_S_RANGE TO E_T_RANGE.
-> Node 'DEPT1', that cannot be posted to
      WHEN 'HNODEVAL'.   " Hierarchy node variable
         CLEAR L_S_RANGE.
         L_S_RANGE-LOW = 'LEAVE1'. " node name (node is a leaf)
         L_S_RANGE-SIGN = 'I'.
         L_S_RANGE-OPT = 'EQ'.
         APPEND L_S_RANGE TO E_T_RANGE.
-> Node 'LEAVE1' (leaf)
Regards
Naga

Variables coding for replacement path customer exit

i have to look up values in query for restricted keyfigure ..
the values are stored in an ods table as below, as the values changes often during the year.:
zdate123.......value1.....value2
1/1/10............90..............91
1/2/10............94..............87
in a query i have to grab all the data for Value1 for different dates,
so i created a variable ZVAR_VALUE1
and write the customer exit for it as below
    DATA: l_s_table TYPE /BIC/AZODS00.
    data: l_s_range_low,    l_s_range,    l_s_range_sign,    l_s_range_opt.
    DATA: v_today type sy-datum.
    v_today = sy-datum.
CASE i_vnam.
WHEN 'ZVAR_VALUE1'.
    IF i_step = 1.
      CLEAR L_S_RANGE.
      SELECT SINGLE /BIC/ZVALUE1 INTO l_s_range FROM /BIC/AZODS00
      WHERE /BIC/ZDATE123 EQ v_today.
      APPEND l_s_range TO e_t_range.
    ENDIF.
this gives error
WInitial RANGE-OPT for customer exit variable zvar_value1 is corrected..
Error for variable zvar_value1...
i tried replace variable with query but i cannot use it in restricted keyfigure as it gives error...variable cannot be used in structure
can anybody help correct the code??

thank you
    DATA: l_s_range TYPE rsr_s_rangesid.
and it works
but now in query outpu t the value comes up as 0.00 for everything
this is my code exactly as below
ATA: l_s_table TYPE /BIC/AZODS00.
DATA: v_today type sy-datum.
v_today = sy-datum.
CASE i_vnam.
WHEN 'ZVAR_VALUE1'.
IF i_step = 1.
CLEAR L_S_RANGE.
SELECT SINGLE /BIC/ZVALUE1 INTO l_s_range FROM /BIC/AZODS00
WHERE /BIC/ZDATE123 EQ v_today.
l_s_range-low = l_s_table-/BIC/ZVALUE1 .
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
ENDIF.
and there exist the value for today for Value1 in ods

Error while trying to Execute the Query with Customer Exit

Hi Experts,
I am having a Query with Customer Exit, it is working fine for all the Employess, except for one. When i try to remove the Customer Exit it is working for her too. Below is the error i am getting.
system error in program SAPLLRK0 and form RSRDR; CHECK_NAV_INIT_BACK
Thanks,
Kris.

Hello Kris,
Are you working with multiprovider? Please check if OSS notes 813454,840080 or 578948 are applicable in your case.
Regards,
Praveen

Text Variable With Customer Exit ABAP Code

Hi Experts,
Could you please help me with the Logic/Code that i need to use in Calculacting The TEXT Variable Using CUSTOMER EXIT
I had a rolling report in which there are 14 Calculacted Keyfigures (Not Restricted KF),Which are
M-1,M-2,M-3,M-4,M-5........M-14
My requirment is to get the MMM.YYYY based on Sy Date as a title of the column
In MAY2009
M-1 represents (Current Month -1) APR2009
M-2 represents (Current Month -2) MAR2009
M-3 represents (Current Month -3) FEB2009
M-4 represents (Current Month -4) JAN2009
M-5 represents (Current Month -5) DEC2008
M-6 represents (Current Month -6) NOV2008
M-7 represents (Current Month -7) OCT2008
M-13 represents (Current Month -13) APR2008
M-14 represents (Current Month -14) MAR2008
In JUNE2009
M-1 represents (Current Month -1) MAY2009
M-2 represents (Current Month -2) APR2009
M-3 represents (Current Month -3) MAR2009
M-4 represents (Current Month -4) FEB2009
M-5 represents (Current Month -5) JAN2009
M-6 represents (Current Month -6) DEC2008
M-7 represents (Current Month -7) NOV2008
M-13 represents (Current Month -13) MAY2008
M-14 represents (Current Month -14) APR2008
Currently the Description of CKF is named as M-1,M-2..M-14.My requirment is to develop Text Variables that displays the description as MMMYYYY

Amrit I think u72720 wanted to know how to get MMYYYY in the column headings.
this can be achieved using text variable easily.
steps
1. Right click and go to properties and click the button next to description box.
2. Add any existing text var from the list
3. now right click on this var in the desription box and select 'new variable'
4. give var name description
   processing type ->replacement path
   replace with char-> fiscal period (or calmonth if that is what restricted in your column)
   select value as 'Key'
finish creation and use this var in all the selection column headings (remove M-1, M-2 etc)
you will get mmyyyy decriptions for every column depending on month of that column

Error With Customer Exit Variable

Hi,
I need To Create Customer Exit For Text Variable based on Two Input Variable values.
can any one correct my code Code is written below based on quarter and Fiscalyearvarient.
I have to get calmonth Text value.
I am getting the error as : "I_T_VAR_RANGE" is a table without a header line and therefore has no
Component Called "0PERIV".
DATA : l_s_range TYPE rsr_s_rangesid,
 loc_var_range LIKE rrrangeexit.
IF i_step = 2.
CASE i_vnam.
 WHEN 'ZTXT_CML' .
 CLEAR: l_s_range.
 LOOP AT i_t_var_range INTO L_S_VNAM WHERE vnam = 'ZQUAR' AND vnam = '0periv'.
 IF i_t_Var_range-0PERIV = 'IE'.
 IF i_t_var_range-ZQUAR = '1'.
 l_s_range-low = 'APRIL'.
 l_s_range-sign = 'I'.
 l_s_range-opt = 'EQ'.
 ELSEIF i_t_var_range-ZQUAR = '2'.
 l_s_range-low = 'JULY'.
 l_s_range-sign = 'I'.
 l_s_range-opt = 'EQ'.
 ELSEIF i_t_var_range-ZQUAR = '3'.
 l_s_range-low = 'OCTOBER'.
 l_s_range-sign = 'I'.
 l_s_range-opt = 'EQ'.
 ELSEIF i_t_var_range-ZQUAR = '4'.
 l_s_range-low = 'JANUARY'.
 l_s_range-sign = 'I'.
 l_s_range-opt = 'EQ'.
 ENDIF.
 ELSEIF i_t_var_range-0PERIV = 'K4'.
 IF i_t_var_range-ZQUAR = '1'.
 l_s_range-low = 'JANUARY'.
 l_s_range-sign = 'I'.
 l_s_range-opt = 'EQ'.
 ELSEIF i_t_var_range-ZQUAR = '2'.
 l_s_range-low = 'APRIL'.
 l_s_range-sign = 'I'.
 l_s_range-opt = 'EQ'.
 ELSEIF i_t_var_range-ZQUAR = '3'.
 l_s_range-low = 'JULY'.
 l_s_range-sign = 'I'.
 l_s_range-opt = 'EQ'.
 ELSEIF i_t_var_range-ZQUAR = '4'.
 l_s_range-low = 'OCTOBER'.
 l_s_range-sign = 'I'.
 l_s_range-opt = 'EQ'.
 ENDIF.
 ENDIF.
 APPEND l_s_range TO e_t_range.
 ENDLOOP.
ENDCASE.
ENDIF.

Hi Supraja,
You would have to declare I_T_VAR_RANGE internal table as the table with an header line.
This you will find in data declaration segment.
ie
DATA : I_T_VAR_RANGE type <table name> WITH HEADER LINE.
or
Create a work area like l_s_var_range.
Use work area while performing operations in your code and later append the record to the table i_t_var_range.
DATA : L_S_VAR_RANGE type i_t_var_range.
Also, i_step = 3 is the right one, because you are processing the customer exit based on the values of the user input of two variables.
Modified code below.
DATA : l_s_range TYPE rsr_s_rangesid.
DATA : L_S_VAR_RANGE type i_t_var_range,
loc_var_range LIKE rrrangeexit.
IF i_step = 3.
CASE i_vnam.
WHEN 'ZTXT_CML' .
CLEAR: l_s_range.
LOOP AT i_t_var_range INTO l_s_var_range WHERE vnam = 'ZQUAR' AND vnam = '0periv'.
IF l svar_range -0PERIV = 'IE'.
IF l_s_var_range -ZQUAR = '1'.
l_s_range-low = 'APRIL'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ELSEIF l_s_var_range -ZQUAR = '2'.
l_s_range-low = 'JULY'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ELSEIF l_s_var_range -ZQUAR = '3'.
l_s_range-low = 'OCTOBER'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ELSEIFl_s_var_range -ZQUAR = '4'.
l_s_range-low = 'JANUARY'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ENDIF.
ELSEIFl_s_var_range -0PERIV = 'K4'.
IF i_t_var_range-ZQUAR = '1'.
l_s_range-low = 'JANUARY'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ELSEIF l_s_var_range -ZQUAR = '2'.
l_s_range-low = 'APRIL'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ELSEIF l_s_var_range -ZQUAR = '3'.
l_s_range-low = 'JULY'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ELSEIF l_s_var_range -ZQUAR = '4'.
l_s_range-low = 'OCTOBER'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ENDIF.
ENDIF.
APPEND l_s_range TO e_t_range.
ENDLOOP.
ENDCASE.
ENDIF.
Hope it helps,
Best regards,
Sunmit.

Problem with customer exit variable in BeX Query

Hi All,
We have created a customer exit variable in a query and populated with few patterns in customer exit.
My query has to bring all the records where the address line is containg the patterns passed through customer exit. Here the query is not working as expected.
It is bringing the values where the address line is exactly same as the pattern and not bringing the records where the pattern is part of the address line.
For example: Pattern passed in customer exit = 'HOSPITAL'
The record where address line = 'HOSPITAL' is shown in the rpeort, where the record with address line = 'HOSPITAL ROAD' is not shown in the report.
I would appreciate your help on this.
Regards,
Rakesh

Hi Diogo,
Below is the code I am using in the customer exit.
SELECT * FROM zae_tt_pbuild INTO TABLE gt_pbuild.
      IF sy-subrc = 0.
        LOOP AT gt_pbuild INTO gs_pbuild.
          CONCATENATE '*' gs_pbuild-pbuild '*' into lv_pattern.
          ls_range-low = lv_pattern.
          ls_range-sign = lc_sign_i.
          ls_range-opt = 'CP'.
          APPEND ls_range TO e_t_range.
          CLEAR: ls_range,
                 lv_pattern.
        ENDLOOP.
      ENDIF.
     ENDIF.
I have tried using '%' instead of '*' aswell but the result is same.
Thanks,
Rakesh

Issue with customer exit for copying one variable value to another

Hello Gurus,
I need to copy the value of a single value variable into another single customer exit variable.
I coded as below.
WHEN 'customer_exit_var'.
 IF I_STEP = 2. "after the popup
 LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
 WHERE VNAM = 'user_input_Variable'.
 CLEAR L_S_RANGE.
 L_S_RANGE-LOW = LOC_VAR_RANGE-LOW.
 L_S_RANGE-HIGH = ''.
 L_S_RANGE-SIGN = 'I'.
 L_S_RANGE-OPT = 'EQ'.
 APPEND L_S_RANGE TO E_T_RANGE.
 EXIT.
 ENDLOOP.
 ENDIF.
I used the condition <= for the customer exit variable in the report. But, it is considering only single value, but not all the values <= to the give value.
Please help me in this regard,
Thanks,
Aarthi.

Thanks for your immediate response Govind.
My report is restricted based on two dates. Date1 and Date2. Need to consider all records whose dates are <= Date1 and <= Date2.
Date1 and Date2 should have same values. But user inputs only Date1.
So, I created Date1 as Single, User Input Variable restricted the query with <=Date1.
Next I created Date2 as Single, Customer Exit Variable and restrcited the Query with <=Date2.
In CMOD I used the above code to assigne Date1 Value to Date2.
When I execute the report, say I give todays date in the report (Dec, 12, 2007). Date2 has to consider all the values <= Dec 12, 2007. But, in my case it is considering only Dec 12, 2007, but not the before dates.
So, Please help me in solving this problem.
Thanks,
Aarthi.

Variable creation in bw with customer exit

Similar Messages

Maybe you are looking for