BEx variables not appearing in Filter tab

Hi All,
I dont see all the variables created in the BEx query designer in the modeller for any particular characteristic.
For example-Variable 'A' is created on material group in BEx query designer but i dont see that particular variable in modeller in FILTER tab.
Please throw some light on this.
regards,
Rajendra

Hi,
After you create a filter in query designer , highlight the filter char. and right click and choose "Save As" .. with technical name and description.
Now go back to planning moduler refresh filter section.Newly created filter in Query would appear here!!!!

Similar Messages

Calendar not appearing in sync tab on MobileMe System Preferences

The Calendar check box is not appearing in sync tab on MobileMe System Preferences.
When I opened SP, MobileMe and sync tab, I can Calendar showing up and disappearing right away. What is this?
I am sorry if it was already discussed, but I could not find it. I can see topics about iCal bug and syncs but not specificaly this one.
Thanks for any help.
Mario Lordeiro

Mario,
The calendar sync has been removed from the MobileMe Sync preference pane, but I have seen the problem you have described, and can invoke it by accessing the "Open MobileMe Preferences...> selction through the sync icon menu item (Option + Click):
Then I am presented with this:
The "Calendars" choice disappears when I access the sync preference directly from System Preferences.
Seems like a bug to me.

Revision level not appearing in material tab of purchase order

hi
I have matained revision level in material master but it is not appearing in material tab of purchase order and print preview of purchase order
regards
Badari

Hi, If u have created proper change no in CC01 with assigned object material with proper validity period u can give revision level to material.
In order to reflect the current revision level on PO printout, the coding in PO print program should be designed accordingly to pick the latest revision level. PO output needs to be re-issued so that the new output can pick the latest information like PO revision level from the master.
Refer below link also for more information,
[Revision level in purchase order|Revision level in purchase order]

Variables Not Appearing Correctly

I am using RoboHelp 8 and FrameMaker 9. In RoboHelp, I have linked to a FrameMaker book. I have encountered a problem that I cannot seem to resolve. All of my FrameMaker variables have imported correctly. However, in a few instances the following code has been added:
 <?rh-udv_start name="AcmeWidgets" ?>Acme Widgets<?rh-udv_end ?>
Ideally, the variable should appear as:
<?rh-udv_start name="AcmeWidgets" ?>AcmeWidgets<?rh-udv_end ?>
The additional code is causing the variable to display incorrectly. I can remove the additional code, but it is added again each time I update the topics. This is only happening in one or two instances – the rest of the variables appear correctly. Can anyone help solve this dilemma?

You can start by running a variable report in Robohelp. Tools > Reports > Variables.
Make sure all your variables are accounted for in the Robohelp project. If not, reimport the files and let Robohelp rebuild everything.
Assuming that your variables are recognized by Robohelp, then in FrameMaker you can try this. Select the heading in question, and then click Heading 1 in your paragraph catalog. Next, while the heading is still highlighted, click Default Font in your character catalog. This should remove any additional character formatting on the variable itself.
Make sure you've mapped styles for paragraphs and character formats in Robohelp. Right-click the referenced FrameMaker book in Robohelp. Click Properties, and then select the Style Settings tab. Click Edit in the Style Mappings area. Select Character Styles in the Style Mapping Type box. You'll want to make sure you've get every FrameMaker style mapped to an acceptable Robohelp style.
That's all I can think of off the top of my head. Hope it helps point you in the right direction.
Jason

If i open a new window instead of a new tab, in the new window does not appear the menu tab

i want to open new windows instead of tabs and in the new window should appear the menu tab and scrolling up and down, but now with the new version the menu tab does not appear and i cannot scroll up and down.

Do you mean opening a window via the File menu (File > New Window) or do you always want to open links that you click on web pages in a new window?
See also:
*http://kb.mozillazine.org/Prevent_websites_from_disabling_new_window_features
You can open the about:config page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config

Variable not appearing for User

Hi everyone!
I have a query which the user have been using for quite some time and it was working fine. When the query is run the user has option of 3 input variables.
Today, all of a sudden, the 3rd variable does not show up for that user. The query runs fine for every other user. I mean all 3 input variables show up.
Some how only for this particular user, the 3rd variable does not appear.
Has any one encountered this situation. Can any one provide me some possible areas to look into as to what might have changed or what could be causing this problem.
All your help is appreciated.
Thankx!
Kumar.

Hi Raj,
I did try to remove the personalization on the user's system. But the variable still did not appear. I noticed few more things. The variable is "Site ID" (custom one).
1) The Site variable does not appear even on other queries only for this user.
2) I tried to make the user use another system and run the query, it still does not appear.
3) I created another query for user just to display the Site ID without any variable. It runs fine. When I created a selection variable for Site ID on the same query now the variable again does not appear.
So I think it must be either a change in authorization or change in definition.
Can you think of any other issue it might be encountering?
Thankx!
Edited by: kumar saurabh on Aug 25, 2008 4:50 PM

Bex variables not surfacing in analysis for excel

Hello Gurus
We are in BO 4.0 and BW 7.1. We have some variables(istep =1) used in a bex report and we have a workbook of analysis edtion for excel on top of this bex report. The bex variables work fine first time but when the data changes these variables are still showing the old data, they are not getting the refreshed data. Can anyone please help me on this. Thanks in advance.

First install the latest SP. Second enable "refresh data on report opening" on your report. This makes sure the workbook refreshes the data displayed each time you open the report. Third try to delete the crosstab and reinsert the crosstab.
Hope that helps!

BC variable not appearing in BEx

I have a Time variable "Last 6 months excluding current month".i have activated it in the Business Content.The problem is i can't see the variable in the Query Designer.Any suggestions.I am using BI7.

Hi,
Not to sound like a help desk, but it may be worth you closing the application and opening it up again, I've noticed in version 7.0 that there seems to be a lag on the refresh of InfoObjects, etc this could be the same issue for you.

Text Variables Not Appearing Correctly in InCopy

In working on a project I have discovered that the text variables do not properly appear in some of my InCopy assignments. I have tried deleting the assignments and recreating them, synchronizing the variables in the whole book, and checking in and out the assignments in InDesign. None of the approaches I have tried have resolved the issue. Hoping someone in the community may have run across this issue before and knows what I'm missing.
Correct Dates in InDesign Incorrect Dates in InCopy

You can start by running a variable report in Robohelp. Tools > Reports > Variables.
Make sure all your variables are accounted for in the Robohelp project. If not, reimport the files and let Robohelp rebuild everything.
Assuming that your variables are recognized by Robohelp, then in FrameMaker you can try this. Select the heading in question, and then click Heading 1 in your paragraph catalog. Next, while the heading is still highlighted, click Default Font in your character catalog. This should remove any additional character formatting on the variable itself.
Make sure you've mapped styles for paragraphs and character formats in Robohelp. Right-click the referenced FrameMaker book in Robohelp. Click Properties, and then select the Style Settings tab. Click Edit in the Style Mappings area. Select Character Styles in the Style Mapping Type box. You'll want to make sure you've get every FrameMaker style mapped to an acceptable Robohelp style.
That's all I can think of off the top of my head. Hope it helps point you in the right direction.
Jason

BEx variables not showing correct order despite ordering at query level

Dear Experts,
I am using a workbook with 2 queries sharing same variables.
The Queries variable order for display in the popup screen has been re-arranged at Query designer level (query properties > variable sequence). Regenerated queries. Relogin to BEx . Re-run workbook. Same old order.
Please advise what could be the cause. I am also wondering if this is due to personalisation.
regards
Bass

Hi Bass,
You mentioned workbook.
If the query itself also has this problem, it can be a bug as SAP Note 1568815.
Symptom
The sequence of the variables in the variable screen is lost.
You may implement the correction of this note via transaction SNOTE if the SP of your system fits.
After that, you need to regenerate the query in RSRT.
Regards,
Patricia

Logical System is not appearing in Informer tab to check SOD's

Hi GRC Experts,
I have an issue with logical system to run risk analysis.
I created logical system by following the Config guide, added physical system and generated rules (RAR Configuration>>Logical Systems>>Generate Rule) for that logical system.
I haven't generated rules for the physical system (RAR Config>>Rule Upload>>Generate Rules) since I dont want more rules to be displayed in the reports.
However I do not see logical system as an option in Risk Analysis (informer Tab) and Config>>Schedule background job for BAtch Risk Analysis>> under system as well.
It would be great if any one advice me on this.
Regards,

Thanks Chinmaya,
Yes you are right, I confirmed with a friend (my ex-GRC colleague) of mine as well.
can't execute sod checks on a logical system - logical systems are only intended to eliminate the need to add the same rule set over and over for the same types of systems
Regards,
Ramesh K

In Firefox 4, why are the website icons not appearing in the tabs and next to the URL in the address bar? They appear fine in the bookmarks menu.

The little favicons that represent the website show up as the blank page icon in the toolbar and in the address bar, but they appear fine in the bookmarks bar. I have tried clearing my cache, and that did not help.

The little favicons that represent the website show up as the blank page icon in the toolbar and in the address bar, but they appear fine in the bookmarks bar. I have tried clearing my cache, and that did not help.

Payment term field is not appearing in Payment tab in MIRO

Hi
While doing MIRO transaction, I could not find Payment Term filed in Payment tab. for Purchase order created and it contains payment term.
for other company codes, Payment term is coming.
For details please see the attachment. Please need your help for resolving this issue.
Thanks and Regards
Appu

Hi,
open t code : OB41 - select 31 double client on posting key - click on maintain field status and click on payment transaction - their your have to select Payment term - Optional entry
then it will come in MIRO
Mahesh

Why, when using Firefox, the page logos do not appear on the tabs wheras they do on the IE?

For example, when I open any page (each page has a certain logo, a graphic symbol); like MSN polska or any other page, instead of the logo I get a blanc rectangle symbolizing file. When I am usin IE there is no problem, Iget a proper logo on each tab.

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
See also (e.g. browser.chrome.*):
*http://kb.mozillazine.org/Resetting_preferences

Row-Wise Variable not populating in Filter

Hi,
I have a row-wise variable that gets a list of units that an employee belongs to (parent/child units).
In answers, I want a prompt with a drop down that shows all of the units the user should be able to access. This works if the user only belongs to one unit. However, if a user is in multiple units, it only shows his "Current" unit in the drop down (just one value).
My prompt query is like this:
SELECT "- Dim_Emp".unit FROM PRS WHERE "- Dim_Emp".unit = VALUEOF(NQ_SESSION.Units)
From what I understand, the where equals clause should evaluate to a where IN clause in the physical statement, but it doesn't appear to be doing that.
I would really appreciate some help on this. Thanks!
Kevin

Kevin,
In prompts, the drop-down can only contain 1 value. You should use the multi-select option in prompt.
Try that and see if you get a list of all parent/child units

BEx variables not appearing in Filter tab

Similar Messages

Maybe you are looking for