BF2142 Orbital Strike no

Hi, I keep getting this weird buzzing noise whenever near an Orbital strike. I've tried changing the setting between low, medium, and high as well turning on/off eax with Hardware renderer. Nothing removes the buzzing noise although it does sound less noisy when on a lower quality sound setting. I?turned off the onboard audio in the bios as well as removed all the drivers for it. The rest of the systems drivers are all up to date. System goes as:?WinXP sp2AMD Athlon 64 X2 4200+Asus A8NE mobo2GB DDR400ATI Radeon X900XTXSB Li've 5. It works fine on software renderer but then everything else doesnt sound as good then, and the noise only occurs on the orbital strike and nothing else.

I have the exact same problem but?I have an x-fi?and just like u say it's ONLY during the orbital strike. but for me it's more of a crackling then a buzzing?(I thought this was probably x-fi related but u say?u have a sbli've 5. )?when i check the card right after playing and this noise happening the x-fi?chip is VERY HOT! and i was wondering if this problem is more likely with the earlier x-fi?cards and if maybe i could solve it by getting a newer one with a heatsink, also if anyone can help then just so u know i got an asus p5w dh deluxe with the intel 975x and i had the same problem when i had the card on an asus p5p800 with the intel 865p chipset, it seems that i've tried absolutely every possible solution i can think of or have found online except for buying one of the newer heatsinked ones. (that is other than this one guys solution were he replaced 6 of the jamicon caps with panasonic caps, and it supposedly fixed this same problem for a while but not permanently...) any help and or response would be greatly appreciated.Message Edited by SilentCrusher on 02-8-20070:26 PM

Similar Messages

  • Battlefield 2142 sound problem

    Hi guys!
    I have sound problems with Battlefield 242 since I bought a new motherboard.
    Old mobo: Gigabyte GA-M57SLI-S4
    New one: MSI DKA790GX
    CPU: AMD Phenom X4 9650
    RAM: 4* GB DDR2 800 Kingmax
    Sound: X-FI Xtremegamer PCI
    VGA: Sapphire ATI 4850 GB DDR3
    OS: Windows 7 64bit Ultimate
    Now I getting static/pop sounds during orbital strikes, only in multiplayer mode, in singleplayer mode everything ok!
    I tried several tips like:
    [*]Move the sound card to another PCI expansion slot and reinstall the sound card's drivers<[*]Replace nati've disk controller drivers with generic Windows ones<[*]Update the motherboard's BIOS to the latest version (including "beta" versions)<[*]Set the PCI Latency to 96 or greater<[*]Use the X-Fi card only in "Audio Creation Mode" with "Bit-matched playback" option on<[*]Overclock the PCI bus to 40?MHz instead of 33?MHz<[*]Deactivate X-Fi "Crystalizer"<[*]Deactivate unused devices in the motherboard's BIOS to free IRQ resources (RS-232 and Centronix ports, second Ethernet port, Parallel ATA controller, integrated audio)<[*]Deactivate Plug and Play in the motherboard's BIOS.<?
    Any more idea?
    ?[/list]

    "Re: Battlefield 242 sound problem! i've had this issue on my PC since the game came out with my X-Fi xtremegamer, even before win7. i think they said it happens with certain motherboards and there is no fix for it.
    what i just do is set it on hardware mode, with high quality. if i use X-Fi mode, then my sound goes crazy during orbital strikes. i wish there was a way to use ultra high audio quality with hardware mode for people like us though.
    interestingly, there was a similar problem in BF2. all the static, crackling, popping noise one day disappeared. it was earlier this year, i am not sure what fixed it, but if it was Creative that fixed BF2's X-Fi mode, I really think they ought to do the same for 242. i am guessing it was Creative because it was during a time when there were no patches for the game. it might have even been the latest OpenAL update i applied to BF2, but it was still from Creative. i did apply the same OpenAL update to 242 but it did not fix the static, crackling, pop problem during orbital strikes.

  • BF2 Crackling sounds

    BF2 Crackling sounds? My specs:
    i7 920 d0 @ 4.0
    Foxconn Bloodrage
    6 GB OCZ Platinum 600 @ 7-7-7-24
    Asus 4850 52 MB 700/0
    X-Fi XtremeGamer Fatalty Pro
    Corsair 620HX
    Viewsonic vx2255wm 22" LCD widescreen
    Lancool PC-K62
    Vista 64 bit Home Premium
    I had this card for 2-3 years now and never had a problem with the crackling sounds on BF2. Well, not never. Just not as bad as I'm having them now. The sound card has always crackled and popped here and there.
    But now, as soon as the sounds load on the screen (through the status), I hear massi've crackles and pops so loud I have to take my headphones off (they would deafen anyone). Sometimes the crackles go away and I can game, but most of the time, the crackles continue and I can't play.
    I've tried the official drivers here online and even tried the beta drivers from Loi-CL (because of the Vista shutdown bug). I've tried turning the settings on the game down (thinking the x-ram was causing me problems), but still crackles and po
    ps.
    BTW, the system is stable stress tested and the sound card works on some other games I've tried. Any fix?

    only way i got cracking sound to stop was using forte drivers dk edited or the new home theater hd x-fi daniel k modded. every other driver causes this problem even in 242 when orbit strike happenes, but forte or home theater hd modded drivers fixed it for me.

  • I fixed my soundcard snap crackle pop is

    hello, good news i hope for all. ever since i upgraded my system to a 939 chip i experienced the dreaded snap crackle pop. i use to do the restart thing, then the problem would go away. untill recently i formated my ide hardri've in to 2 80gb dri'ves for xp, the other to x64. my free comcast mcafee antivirus would not work for x64 so i deleted x64. i still have the the option in my bios for which os i want to select xp pro or x64. but who cares. i can hit my sleep button or hibernate button and i don't have to restart. no snap crackle pop. my specs are (a8v) motherboard, (x2 4400+ dual core) cpu-oc'd to 2.45, (crucial ballistix tracer) memory 5:3 3-3-3-8 @246 , audigy 2sz platinum. i hope this work for all. i am sure you can resize your hardri've to give you more gb back. i am afraid to mess with it right now. i would like to know if this works for others.

    / Im on an X58 build too, except I run Crossfire, my XtremeGamer XFI PCI shares an IRQ with 2 pci express roots, and 5, and 2 microsoft UAA bus drivers(my cards have HDMI audio controllers) I get the worst crackling in BF242 during orbital strikes...... have you tried to update to INF 9..0.04?Message Edited by Radnsmash on 04-8-2009 2:00 PM

  • MSI K9A Platinum, X580 and Xtreme Ga

    So, me just as basicly everyone else who has this problem (which seems to be extremely common) is very tired having such lacking effort from Creative fixing the problems that do excist with the card range to fully corporate with about any modern motherboard. I got the SB9000, Xtreme Gamer - once I installed it in my K9A Platinum motherboard it found itself as BC00, worked fine but gave extremely messed up playback in Battlefield 242 once the Orbital Strike was raping the ground just as some other distant audio playbacks became very crackling which just ruins the experience and especially my faith in Creative as a company. After I updated to latest BIOS, v..6.0, the card wanted to find itself as a E800 and sometimes the audio card didn't want to be detected at all in Battlefield, forcing me to use Software sound which is outragous. I didn't pay to play with motherboard audio, but you guys on Creative just don't give a **bleep**, do you?Drivers are worthless... come on, seriously, it's the most lazy attitude I've ever seen... One update on about a year? And something like three updates, top, on a entire product range? Take atleast fi've minutes and fix this problem, I read the sticky but it didn't tell me anything but "We're Creative, go away from our forum spam down your Motherboard manufactors and hope for the best... losers" and I won't accept it. Either Creative gives us the exact fixes or nobody cares - Creative have the resources to fix this problem right now, it can't be so freaking hard to update the software when it's so easy making products that just won't work with any equipment from the 2th centuary in corporation with that audio chipset... Shame on you Creative. I sent a message to the Support about this half a week ago, still nothing, thanks alot for beeing bad at everything.

    BorkaBonum,
    Tone down the bad language.
    If the card isn't always being detected properly then that could be causing an issue. Have you tried uninstalling it, and then reinstalling it in another PCI slot? That'll force the card onto other resources (like another IRQ).
    Did you send a message to support through the website? Did you get an auto response? A response always automatically goes out when a request arri'ves so you know we got your e-mail, if you didn't get that, check your spam filter first in case it got stuck there.
    Cat

  • New 680i and 1 x 8800GTX system - X-Fi no longer wo

    Just upgraded my old Athlon 64 3800+, nForce 4 SLI (Albatron K8SLI mobo), 2 x 7800GTX system to the following:?Windows Media Centre Edition with all updatesCore 2 Duo e66002GB G.Skill DDR2 800eVGA 680i moboeVGA 8800GTX vid card2 x WD Raptor in RAID 0 config x Seagate SATA HD as backup/storage dri've x Hauppage PCI Dual TV tuner card (NOVA T 500)X-Fi FataltyLogitech Z-640 speakersSamsung 24" widescreen monitor?Unfortunately my X-Fi Fatality no longer works. It worked great for an hour or so, and then I started to get the dreaded scp problem, especially during orbital strikes in BF242. So I swapped the card from one PCI port to the next, and the problem got worse - terrible sound in centre and rear channels, even when not gaming (just doing the speaker test sounds terrible). Now I can't get rid of the distortion in my centre and right channels no matter what I try. I've done the following to try to fix the problem:?.) Moved card between the two PCI slots2.) Removed the other PCI card, my TV tuner3.) Updated all drivers via automatic web update4.) Uninstalled all drivers, then reinstalled them5.) Ensured onboard HD audio is disabled6.) Used PCI Latency tool to try setting speed of 30, 60, 64 and 90 for X-Fi7.) Updated BIOS version to latest eVGA Beta BIOS, which is meant to fix scp in 680i/SLI systems8.) Clocked CPU back to normal speed and voltage?Not one of these has fixed the problem. Running the mobo's onboard audio works perfectly, and I know the X-Fi is fine as it's from my old system, where it ran trouble free for over a year - yes, trouble free in an nForce 4 board running SLI. Bizarre or what?Any solutions to this problem, that I have not already tried, would be most appreciated. However, after researching the issue online for the last 2 days, I'm not hopeful that I'll get?one. ?Message Edited by gunslingerAU on -24-200605:20 AM
    Message Edited by gunslingerAU on -24-200605:20 AM
    Message Edited by gunslingerAU on -24-200605:22 AM

    Just to be sure you haven't overlooked the obvious ones:?Make sure volume is not above 79% or SVM is enabled, to avoid noise created by a too powerfull signal(stressed amp). Also, make sure you have disabled/muted all inputs not being used on your soundcard. Uncheck EAX?if pre-enabled in your "Creative Mixer panel"?under gaming mode, and yeah, make sure you use the correct mode too!?
    Oh, and PCI Latency should be 32(the industri standard)?Did any of that help you out?Message Edited by Mr_DJ on -24-200606:40 PM

  • Here.  Hi I buy pack but the problem is you already purchased in-app purchased but it hasn't been downloaded pls fix it for me and I buy before 15 days pack 19,99 and 4,99 and the same problem  in game world strike

    Hi I buy pack but the problem is you already purchased in-app purchased but it hasn't been downloaded pls fix it for me and I buy before 15 days pack 19,99 and 4,99 and the same problem want or were can I fit it pls

    The e-mail for World Strike support is: [email protected]
    You need to contact them with your questions.

  • I have an ipad mini 1st gen 64 gb (wifi only) and i have problem with some of my apps. These apps have lags when you play with them for a few seconds the apps are having lags are call of duty strike team, gta San Andreas and nfs most wanted.pleas help me

    I have an ipad mini 1st gen 64 gb (wifi only) and i have problem with some of my apps. These apps have lags when you play with them for a few seconds the apps are having lags are call of duty strike team, gta San Andreas and nfs most wanted.pleas help me

    I'm going to guess videos buffer for a while also...
    Two possibilities, one is you should close apps on the iPad, the other is your internet speed is not able to handle the demands of a high speed device.
    To close apps:   Double click home button, swipe up to close the apps.
    To solve internet problem, contact your provider.   Basic internet is not enough for video games and movies.   Your router may be old and slow.

  • Can't highlight, underline, strike through or select text in iOS 7 Adobe Reader

    I have enjoyed using Adobe Reader to proofread clients' documents, but since the last two iOS 7 updates I can't highlight, underline, strike through or select text in PDFs generated by the same source that previously presented no problems.
    The drawing and insert text functions do work.
    I am using an up-to-date iOS 7 iPad 4. The latest Adobe Reader update and a hard reset, as advised elsewhere on the forum, didn't help.
    I have read What's New and looked at the Help manual. I am aware of the new long tap to select one word followed by another tap.
    What am I doing wrong? Adobe Reader used to work so easily. I won't be paid for the time lost while I try to fix this. Any help would be appreciated.

    Hi Krissy,
    I found it extremely frustrating and I don't have a technically sensible answer for you.
    Mine started working again suddenly, but slowly, after many hours of not working, and then improved in speed and responsiveness with use.
    The conventional wisdom is to ensure you have the latest update of Adobe Reader first. There has been more than one since the iOS 7 change.
    The first time it started working again for me was when I was trying in a pdf that I had previously edited in Adobe Reader before the problem began, where I know all the tools used to work (i.e. no problems caused by the file itself) but it is now also working in the new doc that wouldn't work the other day.
    Shradha above gave me the clue that triggered it. I usually go straight to the "Pick a Tool" comment/annotate button in the main/first toolbar at the top, then use the toolbar at the bottom, where the highlight, underline and strikeout tools wouldn't work.
    These functions started working when I tried selecting text directly from the first screen that has the toolbar for "View Modes" (an eye), save/export options, "Pick a Tool", share options and search, without selecting any of these options.
    So, instead of choosing the Pick a Tool button at the top, try just holding down some text for a while, as if to select it (mine wouldn't even select for a long time) and see if the grey tool menu pops up right above that text.
    Initially, I only got the options that were already working to pop up ("Note, Text, Freehand and Signature"). I tried a few different spots in the file and eventually the "Copy/Highlight/Strikeout/Underline/Define" menu popped up. The first time it apppeared was after holding down the text selection action for about 20 seconds, and it didn't appear every time, but then it became quicker and more reliable, and then these functions also started to work from the bottom toolbar that I usually use after choosing Pick a Tool.
    Even today, checking that it still works, it was a bit stuttery to start with and then it came good.
    Perhaps any of the technically-minded members could explain this or perhaps tell us if there is a difference in the action that is supposed to bring up the "Note" etc versus the "Highlight" etc pop-up menus. I'm stumped.
    So try holding down text to select as soon as you open the file, and see if that grey menu will start to appear with the "Highlight" etc options after several attempts. I hope it starts working for you soon.
    C

  • Port Forwarding for Counter Strike Server - DSL Modem to Linksys Router then to my Laptop (wifi)

    Hi,
    i have read many posts here but did not find any solution. Below is my current situation.
    Objective: I want to create a Counter Strike 1.6 Server and for that i have to forward port 27015.
    Networking Issues: Im currently using a Shiro (Dsl Modem) which is given by my ISP & i have connected my DSL modem to my Linksys WRT54G (ver 7.2) router. I connect my laptop thorugh wifi to router.
     I know basic port forwarding but that does not help me. I need a complete tutorial on this issue coz i dont have much network knowledge.
    waiting for reply
    thank you

    Try this link to forward port for Counter Strike on the router.

  • Forwarding port for Counter-strike: Source is not working

    With my linksys router (Model WRT54G)I tried forwarding my port for a Counter-Strike: Source server. My friends tried it after I tried forwarding the ports and it did not work. It looks like this: |Application|Start|End--|Protocol|Ip-Adress------|Enabled| |CS1--------|1200-|1200-|Both----|192.168.1.[105]|Check--| |CS2--------|2700-|27015|Both----|192.168.1.[105]|Check--| |CS3--------|27020|27039|Both----|192.168.1.[105]|Check--| I can get on the server but my friends can not. And yes, I did uncheck "Block Anonymous Internet request". Message Edited by Iridium on 08-16-2007 07:37 PM Message Edited by Iridium on 08-16-2007 07:38 PM
    Message Edited by Iridium on 08-16-2007 07:38 PM

    Is the IP address 192.168.1.105 really the IP address of the server in your LAN?
    Moreover, check what kind of modem you have. Follow the instructions here. If the IP address on the status page is a private IP address and the IP address on whatismyipaddress.com is different then your modem does routing too and you have to configure port forwarding there as well.

  • 3rd Strike -or- How I Learned to Hate Skype

    I believe I've made a huge mistake with my serious efforts to embrace Skype as a viable option to conduct personal business, let alone relying on Skype to keep me in touch with my loved ones. I type "3rd Strike" in my subject-line, but it's more like 4 now...and I won't have the discretionary time to evaluate other solutions to my communications needs; this will have to wait until the weekend.
    If you wish to review my troubles, please refer to my other posts. To summarize: the Windows 8.1 App is a useless pre-beta mess, I can't change my paid-for 2-year contract Skype Number's caller ID (and it comes up as a sanitized Skype user-name), the "Skype Credits" I bought for USELESS ONE-WAY SMSing are a write-off, and this afternoon is the giant turd which clogs the Skype waterpipe: I have ANOTHER potential client who informed me that he'd been trying to reach me all weelend on my Skype number, but would only receive a busy-signal. I was fortunate enough to have met him in person when he'd informed me. Of course, I asked him to verify he had the right number. He produced the slip of paper I myself had written this number down on, and sure enough it was correct. He then produced his cell-phone, dialed my number, and sure enough: BUSY SIGNAL. It turns out that he dialed a "1" at the beginning of the number. WHY?!?
    This introduction to Skype has been an extraordinarily frustrating and potentially business-damaging experience. My increasing irritation has only been compounded by Microsoft's seeming laxidasical attitude towards adressing customers' pointed and serious concerns about their Skype product. It is being heavily marketed as this convenient, "hip" communications solution that turns out to be totally un-cooked. I don't have too much experience with the "old" Skype, but I have used it off and on for years...it worked. Now that I was lulled into diving in with the come-ons that came with my business-class Microsoft Surface Pro laptop, I feel like I've been hoodwinked. Not only is Skype NOT anywhere near ready for personal business, it appears based on YEARS of customer complaints here on the "Skype Community" message board that these serious problems have not been addressed in the slightest. In fact, I'll wager with the introduction of the "Modern Windows" Skype app, serious and damaging backsteps have been affected on the product. 
    I CAN'T TRUST SKYPE!!!
    MICROSOFT: DICIPLINE YOUR NEWLY ADOPTED CHILD!!!

    I believe I've made a huge mistake with my serious efforts to embrace Skype as a viable option to conduct personal business, let alone relying on Skype to keep me in touch with my loved ones. I type "3rd Strike" in my subject-line, but it's more like 4 now...and I won't have the discretionary time to evaluate other solutions to my communications needs; this will have to wait until the weekend.
    If you wish to review my troubles, please refer to my other posts. To summarize: the Windows 8.1 App is a useless pre-beta mess, I can't change my paid-for 2-year contract Skype Number's caller ID (and it comes up as a sanitized Skype user-name), the "Skype Credits" I bought for USELESS ONE-WAY SMSing are a write-off, and this afternoon is the giant turd which clogs the Skype waterpipe: I have ANOTHER potential client who informed me that he'd been trying to reach me all weelend on my Skype number, but would only receive a busy-signal. I was fortunate enough to have met him in person when he'd informed me. Of course, I asked him to verify he had the right number. He produced the slip of paper I myself had written this number down on, and sure enough it was correct. He then produced his cell-phone, dialed my number, and sure enough: BUSY SIGNAL. It turns out that he dialed a "1" at the beginning of the number. WHY?!?
    This introduction to Skype has been an extraordinarily frustrating and potentially business-damaging experience. My increasing irritation has only been compounded by Microsoft's seeming laxidasical attitude towards adressing customers' pointed and serious concerns about their Skype product. It is being heavily marketed as this convenient, "hip" communications solution that turns out to be totally un-cooked. I don't have too much experience with the "old" Skype, but I have used it off and on for years...it worked. Now that I was lulled into diving in with the come-ons that came with my business-class Microsoft Surface Pro laptop, I feel like I've been hoodwinked. Not only is Skype NOT anywhere near ready for personal business, it appears based on YEARS of customer complaints here on the "Skype Community" message board that these serious problems have not been addressed in the slightest. In fact, I'll wager with the introduction of the "Modern Windows" Skype app, serious and damaging backsteps have been affected on the product. 
    I CAN'T TRUST SKYPE!!!
    MICROSOFT: DICIPLINE YOUR NEWLY ADOPTED CHILD!!!

  • Strike Through in ADOBE appears in the subsequent line items

    Hello ADOBE Forms creators;
    I am using the functionality of Strike through(line through) in my PO line items if the line item is deleted. However, in the following line item which is not marked as deleted if some of the fields have the same value as the deleted item, for example: if the quantity in the previous line(the deleted line item) is 5 and in the current line is also 5, this quantity in the current line item which is not marked as deleted gets the strikethrough as well. But if the value is not the same it will not get the strike through.
    Can anyone put some light into this issue. The points will awarded to the correct answer(s).
    Thanks,
    Cyrus

    What you are seeing is exactly as you described....ie. when the fields match in value, it applies to all. This has do to how you are navigating your DOM there in your Javascript. You are not making use of any indexing....just simply saying "any of my field values for quantity, apply this style". You are "referencing by name" to your fields.
    You have:
    this.parent.items.QUANTITY.blah.blah
    when it should look something like (forgive me but off top of my head....look/search for correct syntax)....
    this.parent.list.items[index].QUANTITY.blah.blah
    basically you need to find the index of your "QUANTITY" children (and other like named fields). They are all "named" the same, so they will have some kind of index to resolved them correctly. It might be an index after "QUANTITY". I am guessing you will look at the index for IND_TXT and then find all other fields with that same index (ie. same row?).
    Hope this helps.

  • Want to see constant text, say, TEST with strike off (like in MS word) prit

    Hi
    I hv a smartform, in which I hv a box with the size of 1 inch height and 10 inch width. I hv some text in it, say, "TEST", well.
    Now I need to print it as strikeTEST (meaning strike off like in MS word)
    So, pls. let me know How can get it?
    Thank you

    Thank you,
    "there are ready made fonts with strike out option"........Can you pls. mention couple, so that, will get it from Google. Right now, I dont know any such.
    Thank you,

  • Vista x64 / Logitech Orbit MP / XFi Platinum problem confirmed... PLEASE RE

    I was wondering why my 7. option disappeared from my speakers configuration option. Turns out another person had the same issue with his computer and found out that unplugging his Orbit MP fixed the problem. (It was limiting his sound to 5.) Well I had the same configuration but took it a step further to disable the Logitech Orbit recording device in device manager.Problem solved! Im not sure if this is a Vista, a CL, or Logitech problem. I figure I'd throw this out there to let everyone know. Problem reproduced with: XFi Platinum w/ optical out going to external receiver 7.Logitech .5 Quickcam DriversXFi 2_5_0004 drivers (the newest ones) Would like to hear everyone else's comments on this. Thanks.

    It's funny how some people say you can enable 5. with vista 64 using alchemy but for 10 days now I have yet to get a response.

Maybe you are looking for