BH-103 on E90

After alsmost a month of using this bluetooth headset, I've realized that my FM radio doesn't work. All the functionality, I think work except the Radio. Has anybody has the same issue? Thanks.

Hello friends,
I want to buy BH-103 and i want to know:
Is it loud?
It covers the sound arround, i mean cars,bus,traffic?
It has bass?
P.S. I want especial for music!
Thanks a lot

Similar Messages

GRN Report for 103 and 105 movement

Hi all
IS there any report available in SAP
Like i have done GRN with movement type 103 and 105
So i want to know for a specific plant against specific movement type let us say
my po is of 100 quantity
i have done GRN for 20 qty mov type 103 and 20 qty with mov type 105
GRN of 40 qty mov type 103 and 4 qty with mov type as 105
grn 20 qty with mov type 103
grn 20 qty with mov type as 103
so i want a report material doc created for mov type 105 w.r.t 103 mov type material doc
and only 103 material doc whose 105 is not done
plz give me ur valuable input
regds
shailesh

ya that is possible to get but not thorug standard MB51
look do this way create a query in SQVI
select tables MSEG and MKPF , EKBE now from this table select the field movement type as selection critera and posting date , plant etc.
now select the field MSEG,Movement type, PO no.
i will give you the logic system should select the material document for movement type 105 then against this material document you can get the po now(that is already there in mb51 just change the layout) now from the purchase odere no selected you can get the material document for movement type 103 from table EKBE that is purcahse order history . check with abaper by using this logic

Deployable cannot be retrieved from FILE_PROVIDER , stopping. Cause:com.sap.conn.jco.JCoException: (103) JCO_ERROR_LOGON_FAILURE: Name or password is incorrect

Hi All,
After two years of CTS+ working without issue, in the last fortnight JCO_ERROR_LOGON_FAILURE has occurred. I have reviewed all the configuration in document http://scn.sap.com/doc/DOC-30177, and it all looks fine. The user configured also checks out fine as well. The user id that is causing all the trouble is CTS_<SID>. We chose this option so we could determine which user in case of future issues. We have two development paths, Project and BAU. So at anyone time transports that have started in the BAU development system will need to be imported into the Project development system (using transport express) and vice versa. Attached is the security authentication log from the system showing authentication failure. I have also checked the transport routes defined for the business systems in the SLD and these look fine as well. Roles assigned to the user are SAP_CTS_PLUS,
SAP_J2EE_ADMIN, SAP_XI_CMS_SERV_USER, SAP_XI_CONFIGURATOR, SAP_XI_DEVELOPER, Z_CTS_PLUS_ADDITIONAL. I have also checked the permissions on the file at the operating system level.
Any suggestions/advice gratefully received as this really has me scratching my head.
Log:
!REPOSITORY_ERROR_CHECK_STACKTRACE!
[EXCEPTION]
com.sap.conn.jco.JCoException: (103) JCO_ERROR_LOGON_FAILURE: Name or password is incorrect (repeat logon) on DXI mshost strsap31
at com.sap.conn.jco.rt.MiddlewareJavaRfc.generateJCoException(MiddlewareJavaRfc.java:662)
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcClient.connect(MiddlewareJavaRfc.java:1364)
at com.sap.conn.jco.rt.ClientConnection.connect(ClientConnection.java:731)
at com.sap.conn.jco.rt.PoolingFactory.init(PoolingFactory.java:103)
at com.sap.conn.jco.rt.ConnectionManager.createFactory(ConnectionManager.java:293)
at com.sap.conn.jco.rt.DefaultConnectionManager.createFactory(DefaultConnectionManager.java:46)
at com.sap.conn.jco.rt.ConnectionManager.getFactory(ConnectionManager.java:262)
at com.sap.conn.jco.rt.RfcDestination.initialize(RfcDestination.java:509)
at com.sap.conn.jco.rt.RfcDestination.getSystemID(RfcDestination.java:533)
at com.sap.conn.jco.rt.RepositoryManager.getRepository(RepositoryManager.java:30)
at com.sap.conn.jco.rt.RfcDestination.getRepository(RfcDestination.java:603)
at com.sap.conn.jco.rt.RfcDestination.getRepository(RfcDestination.java:27)
at com.sap.cts.jco.tms.TmsJCoAdapter.initializeJCo(TmsJCoAdapter.java:76)
at com.sap.cts.jco.tms.TmsJCoAdapter.<init>(TmsJCoAdapter.java:57)
at com.sap.cts.jco.EpsFileReader.<init>(EpsFileReader.java:76)
at com.sap.cts.jco.EpsFileReaderController.doImport(EpsFileReaderController.java:90)
at com.sap.cts.core.ImportManager.execImport(ImportManager.java:102)
at com.sap.cts.ejb.DeployBean.execImport(DeployBean.java:170)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:47)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:47)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:37)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:21)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_MethodRetry.invoke(Interceptors_MethodRetry.java:46)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:25)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:17)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:138)
at com.sap.engine.services.ejb3.webservice.impl.DefaultImplementationContainer.invokeMethod(DefaultImplementationContainer.java:204)
at com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.process0(RuntimeProcessingEnvironment.java:710)
at com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.preProcess(RuntimeProcessingEnvironment.java:662)
at com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.process(RuntimeProcessingEnvironment.java:322)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPostWOLogging(ServletDispatcherImpl.java:199)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:65)
at com.sap.engine.services.webservices.servlet.SoapServlet.doPost(SoapServlet.java:61)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:754)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:152)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:38)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:457)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:210)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:441)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:430)
at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:38)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:81)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:276)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:81)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.SessionSizeFilter.process(SessionSizeFilter.java:26)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:57)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:43)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:475)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:269)
at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:56)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:328)
Caused by: RfcException: [null]
message: Name or password is incorrect (repeat logon) on DXI mshost strsap31
Return code: RFC_SYS_EXCEPTION(3)
error group: 103
key: RFC_ERROR_LOGON_FAILURE
at com.sap.conn.rfc.api.RfcApi.RfcOpen(RfcApi.java:219)
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcClient.connect(MiddlewareJavaRfc.java:1331)
... 87 more
Caused by: RfcException: [DXI|strsap31]
message: Name or password is incorrect (repeat logon)
Return code: RFC_SYS_EXCEPTION(3)
error group: 104
key: RFC_ERROR_SYSTEM_FAILURE
Exception raised by DXI|strsap31
at com.sap.conn.rfc.engine.RfcIoOpenCntl.RfcReceive(RfcIoOpenCntl.java:2034)
at com.sap.conn.rfc.api.RfcApi.RfcOpen(RfcApi.java:187)
... 88 more
Caused by: com.sap.conn.rfc.exceptions.RfcGetException: Name or password is incorrect (repeat logon)
at com.sap.conn.rfc.engine.RfcImp.ab_rfcerror(RfcImp.java:1157)
at com.sap.conn.rfc.engine.RfcGet.rfcget_run(RfcGet.java:131)
at com.sap.conn.rfc.engine.RfcGet.ab_rfcget(RfcGet.java:23)
at com.sap.conn.rfc.engine.RfcRcv.ab_rfcreceive(RfcRcv.java:33)
at com.sap.conn.rfc.engine.RfcIoOpenCntl.RfcReceive(RfcIoOpenCntl.java:1981)
... 89 more

User id missing in client 000

SAP ECC error:'Migration Monitor' exits with error code 103.

Hi All,
I am doing SAP ECC installation for windows 32 bit with MAXDB as backend.
I am stuck at the import ABAP.Getting error
ERROR 2008-08-08 16:10:53
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
1) imort_monitor.java.log-->contains
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
Import Monitor jobs: running 1, waiting 0, completed 18, failed 0, total 19.
Loading of 'SAPVIEW' import package: ERROR
Import Monitor jobs: running 0, waiting 0, completed 18, failed 1, total 19.
2)import_monitor.log
ERROR: 2008-08-08 16:10:36 com.sap.inst.migmon.LoadTask run
Loading of 'SAPVIEW' import package is interrupted with R3load error.
Process 'D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -nolog -c 0' exited with return code 2.
For mode details see 'SAPVIEW.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
INFO: 2008-08-08 16:10:52
All import packages are processed.
WARNING: 2008-08-08 16:10:52
1 error(s) during processing of packages.
INFO: 2008-08-08 16:10:52
Import Monitor is stopped.
3)SAPVIEW.log
error message returned by DbSl:
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
(CREATE VIEW "Z_T_CO_BW" ( "KOKRS" , "KOSTL" , "VERSN" , "KSTAR" , "WOG001" , "MEG001" ) AS SELECT T0002."KOKRS", T0002."KOSTL", T0001."VERSN", T0001."KSTAR", T0001."WOG001", T0001."MEG001" FROM "COSS" T0001, "CSKS" T0002 WHERE T0002."MANDT" = T0001."MANDT")
DbSlExecute: rc = 103
(SQL error -942)
error message returned by DbSl:
(DB) INFO: disconnected from DB
D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: job finished with 3108 error(s)
D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20080808174211
Only SAPDB: SAPSID srvice of SAP DB is only up.
No other services of database are up.And i am not able to up the other services also.
Is it required to up the other services?
If not?
Why this error is occuring?
Any help will be appreciated.
Thanks&Regards
Manisha das

Hello Manisha,
The one of the possible reasons for this is due to lack of H/W.
Increase your RAM size to atleast 2GB and utilise the same while you are installing ECC in database parameters step..
If the issue is with H/W, then this should fix the issue.
Hope it helps,
Regards,
Satish.

Tecra A8-103 Port Replicator III does not work on WIndows 7

Hi 2 all,
My Tecra A8-103 worked very fine with docking station: Advanced Toshiba Port replicator III plus.
It worked well on Windows Vista.
but, after Windows 7 was installed, docking station does not accept/recognize microphone and stereo input ??
I mean, when I connect microphone jack and jack from external speakers into docking station, there is no sound ??
are there any drivers perhaps ? to be installed for Windows 7 ?
thanks in advance
Zoran

I have a MacMini that is a intel core solo and has the DVI port not the mini-DVI.
I was able to load win7 but only after connecting the MacMini to an LCD monitor via DVI-to-VGA converter that came with my mac mini.
I am running snow leopard on the mac side and the video works great in 1080p via DVI cable direct to my DLP tv. but when I loaded win7 the tv couldn't display the video feed. The tv read "not compatible data". The DLP tv has a VGA input and win7 is running fine on it.
I am looking for a way to enable the video card to give the same quality on the win7 side as the OS X side, so that I can go back to the DVI cable and the 1080p I was getting in snow leopard.

E90 Several problems please help!

I have used 9210 and 9500 before and i found that the new e90 are well built but not user friendly enough...
please help me with the problems below as i cannot find the menu or option for it...
1.while searching for a contact, the number is not shown...i think it was shown both the name and contacts rite?
2.I cannot use the hsdpa modem while the msn on the phone is stil running? why? is it because the access point is being used by the phone?
3.any yahoo messenger software for it?
4.there are a few shortcuts in the desk page (or desktop?) can i rearrange the shortcuts for more efficiency?
Please help as i really like the phone built but not yet the features.
ricky

23-Sep-200706:03 PM
rwij wrote:
I have used 9210 and 9500 before and i found that the new e90 are well built but not user friendly enough...
please help me with the problems below as i cannot find the menu or option for it...
1.while searching for a contact, the number is not shown...i think it was shown both the name and contacts rite?
2.I cannot use the hsdpa modem while the msn on the phone is stil running? why? is it because the access point is being used by the phone?
3.any yahoo messenger software for it?
4.there are a few shortcuts in the desk page (or desktop?) can i rearrange the shortcuts for more efficiency?
Please help as i really like the phone built but not yet the features.
ricky
Hello Ricky.
All of the questions you asked could have been answered if you had used the search feature. However, as a first timer we like to point you in the right direction. Here goes:
1. There is a search feature that is in the Office folder. It can search the entire device for you, for names, addresses, etc...
2. You can not sure the same connection for two different operations. I mean that: if you want to use MSN and then use Yahoo, you must tell Yahoo to use the connection that MSN is on. This will work every time. The best thing to do is to use a default connection for both. Make sure they use the SAME connection.
3. There is: IM+ by ShapeServices @www.shapeservices.com (pay service), Fring @ www.fring.com (free and it works well. Consider it Skype for your phone).
4. Nope. There is a piece of software that I can not remember the name to that will do this. Someone will post the link for you for sure. Vmoisa, Jafores. You guys around?
Hope this helps.
Show the KUDOS button some love.... Hit that bad boy.... It don't hurt....
Apple iPhone 5,
Retina MacBook Pro, iPad Mini, Nikon D4

I've dropped my E90 today :-(

I "managed" to drop my E90 today, from about 1m on a concrete floor. I have one hindge a little bit scratched, but the microphone stopped working ! The other party cannot hear me when I make a call, and the videoa are recorded without sound. I have taken the battery out and put it back on, but it is the same. However, it works perfect with the hands-free. So it is a hardware damage. It seems that I will have to leave it in service after all, even hough I have avoided this for a long time.
Now, I had many Nokia phones before, I have dropped all of them from even higher, but none of them got hardware problems. I have dropped my previous communicators (9300 and 9300i) so many times that I had to change their entire cases (they were cracked all over) But it never happen anything like this before, not even from a tumble down the stairs for one entire floor !
So, if you ask me, I preffer a plastic case which cracks on impact but it protects the internal components, rather than a metal case which holds better in case of an impact, but sends the shock inside. Because now I have a phone with no cracks but unsusuable without the hands-free.
2110i, 6150, 6210, 6310i, 6670, 9300, 9300i, E90, E72, HTC Touch Pro2, Samsung Galaxy S, Samsung Galaxy S II

05-Oct-200708:47 AM
turo wrote:
There was quite a long discussion with this Informed exactly same but drop was less then 1m. Mic died First drop
I've missed that thread, appologizes for re-posting. How long did it take for the repair ?
2110i, 6150, 6210, 6310i, 6670, 9300, 9300i, E90, E72, HTC Touch Pro2, Samsung Galaxy S, Samsung Galaxy S II

My E90 review

I have my new Nokia E90 for several weeks now and I had the chance to thoroughly "evaluate" it. I must say I am coming from a Nokia 9300 / 9300i, which means that I am influenced by them (I have used them for over 2 years now)
First the good stuff about the E90:
- SPEED - it is extremely fast compared to 9300i and all functions benefit from this. Everything works as it should be, including Internet browser, meaning that the waiting times are at a minimum on all applications.
- 3G - I do not use video-calling too much, but my God the Internet at 3.5g is fast compared to GPRS ! Internet at high speed makes live much easier, while another very good aspect is the ability to make calls and stay connected on the Internet at the same time (impossible with GPRS).
- You always have the possibility to choose the access point when needing an Internet connection. Every time an Internet connection is required, you are asked which access point should be used. On 9300i this wan only available for Internet Browser, while the E-mail program was much more difficult in this respect.
- Larger inner screen. While 9300i dsipaly was only 640 pixels, E90 has 800. This in a benefit only for Internet browsing, even though most pages these days require 1024. Never the less, a step forward.
- The keyboard is lit (finally) ! Very good !
- The phone software can be up-graded by the user. This is a very smart move from Nokia ! No new software available for Nokia E90 just yet, though.
- It has vibration alert. Good for meetings.
- Power-up is done maybe 5 times faster than 9300 / 9300i. A Big step forward.
- In two weeks my E90 never hanged-up, while 9300i would have hanged-up several times in this time.
The bad stuff:
- Missing shortcuts. Nokia 9300i is GREAT when it comes to shortcuts. The new E90 does not have too many shortcuts and some of them do not even work in all applications. I am especially missing the Ctrl+T for full screen (its lack is most annoying in Internet Browser and Acrobat reader) and the Zoom keys (Chr + arrows up and down) Having a BIG keyboard but being forced to work through the menus to perform simple tasks is AWFUL. A big step back from 9300i.
- Missing buttons on the right of the screen. Not only that E90 has only two buttons on the right of the screen (compared to 9300 / 9300i), but they are normally full with "Options" and "Exit". 9300i was very smart: have important functions on those 4 buttons on the right of the screen, while keeping a proper, computer-like menu on top of the screen. Another step back from 9300i.
- Internet Browser does not allow to open a new window, unless a web page is opening a new window. You do not have anymore the option of opening a link in a new window. So we have now an Internet Browser which is performing slightly better than the one in 9300i, but with fewer functions. Another step back from 9300i.
- E-mails are displayed without the "To:" and "Date:" field, unlike in the 9300i. If you want to see when the message and to whom it was sent, you have to check the "Message details". Again, why the big screen if it in not user properly ?
- No fax. I cannot believe this ! Another step back from 9300i.
- Computer has only basic functions and it does not know the order of operation (in the 21st century !). This is step back compared to the very good computer available on 9300i.
- It does not show the phone number of the person calling, only the name. If a person is calling and the contact has several numbers in memory, you do not know from which number that person is calling from. The 9300i was showing the number on the inner display (not on the outer display though). For me this is a big problem since I have to reject calls from some numbers and accept calls from other numbers, for the same contact name. Of course I can go around it by putting the same person on two contact names with different number, but why ? The displays are huge, so the number of the caller would easily fit on the screen. Another step back from 9300i.
- Search function for contact was very much simplified. You can no longer search a contact by company name, job of phone number. Even though this function was slow in 9300i, at least it worked. Another step back from 9300i.
- Keyboard keys are very stiff. The keyboard on 9300i was perfect in terms of ergonomic (at least for my fingers) They keyboard on E90 gives me cramps on fingers because I have to press much harder on keys.
- Keyboard is touching the screen and leaves grease mark all over it. Very annoying because you have to clean the screen very often.
- No BACK-UP to Memory card function anymore ! I have to keep a back-up copy of the phone in my computer, instead of the memory card. If my E90 gets broken, I will have to connect the new one to a computer. Another step back from 9300i.
- Multitasking have a strange meaning on the E90. You can no longer have opened in the same time the Messaging program and several messages. If you open a message, the entire messaging program is blocked with it. If you want to see two E-mail messages in the same time, you have to close one of them and open the other. Same, if you open a document from File Manager, the entire File Manager is blocked until you close the document. Another MAJOR step back from 9300i.
- Calendar does not show the "Number of years" for anniversaries. Another MAJOR step back from 9300i.
- Notes are no longer on the Desk, but in a separate program. This new program is very good because it searches for E-mail addresses, web addresses and phone numbers in the notes (something which 9300i was not doing), but the notes are no longer sticking on your face. The display is big, why use it ?!
- Text documents (.txt) are opened by default in an viewer which does not allow editing, just viewing (?)
- I do prefer the Office programs (Text editor and spreadsheet editor) on 9300i. Quickoffice might display the documents better, but it has one very annoying "feature": you have to switch from edit mode to viewer mode. Why ?
- I did prefer the Picture Viewer and the Music Player on the 9300i. The new ones want to be smart an search for available pictures / music all over the phone. I just preferred to tell the software which folder I want to see / play. Maybe it is a matter of taste and this was a response to the iPod (which is definitely not on my taste)
The two new major features added on E90:
- GPS is EXTREMELY slow on acquiring the position. I actually use it with an external GPS mouse connected to the phone via Bluetooth. It work 10 times faster !
- CAMERA: all pictures have a blue tint, while the camera button is very hard to be used. On top of this, the long time from the moment the button is depressed until the picture is taken makes the camera almost impossible to use in real life. To obtain acceptable results you need to take pictures in full natural light, on static subject, and with a lot of patience. So forget about the camera. Moreover, in my line of work I am not allowed to enter with a camera phone on some of the customer's premises, so I have to leave the phone outside and change the SIM to another phone.... Why do we not have the choice to have the phone without the camera, like on E50 ?
All in all:
- If you do not count the incredible speed and the 3G, E90 is a step back from 9300i on almost all functions.
- Nokia 9300i was designed for power users, having in mind the person which is using a PC computer at full capacity and expects a similar performance from a Communicator. Nokia E90 was designed for kids who want to show off with an expensive phone, not for power users.
- I was expecting from Nokia just a 9300i communicator with 3G and 10 times the speed. It really does not need anything more, hence the camera or GPS.
- The fact that I can have the same application running both on the large inner screen and on the smaller outer screed is of no use for me. If I wanted to use the applications on the smaller outer screen I would have bought the Nokia N95.
- I do not think I could come back to Nokia 9300i because it is VERY slow compared to Nokia E90. But just for speed and 3G I have to make A LOT of compromises.
- However, if I brake the E90 (which is very easy with a phone of this size), I am not sure I will pay the same money for it again. I will probably buy a new 9300i which is very cheap these days and incredible value for money.
Now, I would very much like to have somebody tell me that I am wrong and that all the features that I am missing so much actually exist and I just did not see them...
August 2007.
2110i, 6150, 6210, 6310i, 6670, 9300, 9300i, E90, E72, HTC Touch Pro2, Samsung Galaxy S, Samsung Galaxy S II

Because my review of E90 has got too long, especially on he not so pleasant issues, I have put together a list of the problems / missing features. Of course, the comparison is with 9300i, so the users of other S60 Nokia phones swill not notice most of them.
Software issues:
1. Missing fax
2. Missing keyboard shortcuts (most of them)
3. No scheduled SMS
4. Only basic computer
5. Browser cannot "Open a link in a new window"
6. Browser has no "Save picture as" function. Images can be saved only working through several menus.
7. Messaging cannot open several messages in the same time
8. E-mail does not display "To:", "Date:" and sender E-mail address (they can be found only in "Message details")
9. Phone does not show the number of the caller, nor the number of the person I'm calling (only the name)
10. No advanced search fucntion for Contacts (search is available only for names, but not for company name, function, address, phone number, etc)
11. No "Back-up to memory card" function
12. Calendar does not show the "Number of years" for aniversaries
13. Strange multitasking (opening a document from File Manager will block File Manager until the document is closed)
14. Mail / calendar software does not support .ics attachments
15. Problems with roaming in Russia
16. Tab key adds 5 spaces instead of moving the cursor to the next field
17. No buffer for the keys pressed in advance
18. Voice recorder can only record 60 seconds (instead of 60 minutes on 9300i)
Hardware issues:
1. Stiff keyboard
2. Keyboard is touching the screen and get it dirty
3. Extremely slow GPS
4. Camera button hard to opperate
5. Pictures taken have a blue tint
If here are any other isues to be added to the list, or those on the list are not correct, please feel free to comment.
2110i, 6150, 6210, 6310i, 6670, 9300, 9300i, E90, E72, HTC Touch Pro2, Samsung Galaxy S, Samsung Galaxy S II

New to the E90 - grateful for some help ...

Greetings All,
Just got my E90 a few days ago. Just a few questions to start off with:
1. Can anybody recommend a decent free file manager application, i.e. one which actually allows me to browse the entire filesystem? The built-in Nokia file manager only lets you see the \data\ folder in the phone, so for example you cannot see anything you've downloaded from the web!!
(1b. Or is there a way to change the destination of downloaded files in the web browser?)
2. Why is the GPS so poor? I live in London, UK, and there must be plenty of satellites available (everybody around me uses GPS with no problem), yet my E90 frequently finds only one satellite, or none at all, and can't triangulate my position.
3. (This is tricky.) Does anybody else use s2putty? (s2putty.sourceforge.net) It works fine for password access, but it won't accept my private key (says "Cannot use - not a private key"). I've tried creating a brand new key pair in puttygen and still it doesn't work. I think the file format is somehow munged when it's copied over to the E90. Does anyone have any idea about this?
4. Is it just me or it the user manual really totally rubbish? Is there a good user guide somewhere which tells you how to switch between apps easily, sort out your own menus, get rid of lots of the pre-installed gubbins etc. etc.?
5. That'll do for a start, unless anyone knows of a good hex editor, DOS emulator or Master Of Magic port ...
Thanks in advance for any help,
CC

Y-Browser:
http://www.drjukka.com/YBrowser.html
Many guides that might not have come in the sales package here:
http://europe.nokia.com/appmanager/UnitedStatesEnglishEUROPE_NOKIA_COM_3/Get_support;JSESSIONID_NCOM...

ITunes update 11.0.2. is delivering failure 103 - any experience how to fix it?

iTunes update 11.0.2. (loaded automatically in the background and signaled in the App Store symbol is delivering failure 103 if I try to install it - any experience how to fix it?

Try just downloading and installing from the Support site - http://support.apple.com/kb/DL1614 - instead of the Mac App Store.
Clinton

Problem with E90 Map 2.0 Application

My E90 Details
Firmware : 300.34.84 Model RA6 Nokia E90 (26)
Map 2.0
The problem is whenever I launch the MAP Application,
1. It tries to go online, but stay there and hangs, need to remove the battery and then I could restart turn it on.
2. Successfully go-online, using it for a while, then the screen just freeze. Again, need to remove the battery.
3. Successfully go-online, navigate, after I exit from the Map application, the phone hangs, need to remove the battery to get the phone working again.
I just got my E90 1 month ago, been in and out from Nokia Sevice centre ever since, all they can do is format and reload the firmware, but the problem still persist.
Anyone have similar problem, please help.

hi i have the same configuration, the problem is quiet common at my end to, first problem i figured was that network i selected for internet and what maps was using were different. when it ask u to go online and u select a access point, make sure this is same as the one in maps >tools>setting>internet>default acess point.
the other option is use since in india the network is not really good at all places, i dont turn on the internet immediately i let it run for about 20 secs or so then let it go online and it works fine.
i personally found the earlier maps version a lot better with the new one u need a lot of patience.

103 to 105 report

do we have any transaction code to check the open 105 for the 103.
(i dont want we103 or we105 selection para meter in me2l/m/n..etc
i wan the same in reprt.
GRN number of 103               103 release (105)
50000101                    50000103
50000102                    not released
50000104                    50000108
50000105                    50000107.....
do we have any standard report for the same, if not please let me know from where and which field i can take from MSEG/MKPF table... i am not getting the same in single transaction...

if u r talking abut movement type 103 and 105 then u can try mb51,mb5b.
regards,
indranil

103 movement inspection for spares and engineering materials

can any body tell me how to control engineering and & spares materials when i done GR against 103 movement inspection lot is created but there is no control of goods is keep in quality but system allow 105 movement total quantity also how we will control the quantity if it is in quality stock any settings is required kindly send me guidelines

Hii,
103 movement is GR w.r.t P.O into GR blocked stock. Generally GR blocked stock means keeping the material outside the plant. The stock displayed in GR bloocked does'nt considered into inventory stock.
103 movement will be activated were the stores want to put some Quantity check on the material & where the Purchase dept does'nt want to take any accountability for the supplier deficit stocks. (In 101 immediately accountability take place and reflected in the inventory and FI document gets generated).
In MIGO after 103 movement, user can immediately release stock from GR block stock in the same screen (A05 Release from GR blockd stock). From Quality point of view u need to go with 103-105 movement type. Here don't activate Quality for 103 movement but activate quality for 105 movement type.Bcoz in 103 after inspection, u cannot show defect material in Blocked stock and it will remain in GR blocked stock. Confusion remains between new material and defect material where bothe will remain in GR blocked stock.
In short 103 - Quantity check (stores activty, no Inpsection lot)
105 - Quality check (Quality activity. Inspection lot)
Edited by: Lokesh K on Aug 10, 2010 1:03 PM

Report for Mvt Type 103 & 105

Dear Gurus,
Is there any report which will show the corresponding material document of 105 MVT/ 104 MVT type for 103 MVT type Material document
Regards,
Rajesh

Hi,
What you have to do is:
Enter Tcode MB51...Enter Mvt type 103 and in to enter 105..
Now clcik on F8 Button...It will display you the result as per what you have expected..
Cheers!!
Utsav

Report for Pending 103 for 105 (If GR based IV is untick condition)

Hi,
I required logic for mapping the report in Pending 103 for 105, If GR based IV is untick condition in PO.
Our business accept the material with movement type 103. After various tests (outside SAP), we post this document with movement type 105.
Normally each MIGO document has a reference document no . In case of 103 document, the reference docu no is the same no. In case of 105 document, the reference docu no is the docu no of 103.
It is noticed that for some 103 and 105 documents, the reference docu no is blank when GR based IV is not ticked in the Purchase order.
We need some logic to find the ref of 103 doc in 105 doc.
Regards,
Maddali

Thanks for your promt reply.
I have seen ME2M/ ME2L with selection parameter we104 or we105. However our client required specific report format for controlling this issue.
So I am trying for logic in this particular senarieo.
Regards,
Suresh

BH-103 on E90

Similar Messages

Maybe you are looking for