Bi-Administration cockpit step by step

Hi,
I am trying to install BI_Administration cockpit as given in the oss note  934848 . I am getting lot's of ABAP dumps when I am doing the first step using SPRO. I made sure I have all the authorizations and also confirmed with my basis about the service packs. Cauld someone please explain this.
If the above approach does not work can I go ahead and activate only the cubes that I need. If so, could some one send me the step by step process( with Imp IC's and their respective datasources).
Points will be awarded generously
Thanks,
Praveen

BI Administration Cockpit and new BI Statistics Content in SAP NetWeaver 2004s - Webinar Details
https://www.sdn.sap.com/irj/sdn/webinar?rid=/library/uuid/d09864c5-0bb0-2910-8e8a-a306a886dcd9
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50f95b21-7fb8-2910-0c81-f6935d4c654b
Note mentioned is correct,and hope you are on SP-13.
Let us know the short dumps you get ,to nail down errors.
Hope it Helps
Chetan
@CP..

Similar Messages

  • LO cockpit Extraction Step by step guide and enhancement process

    Hi All,
    My name is Prathibha and I started of my career with SAP BW. It is my pleasure to get introduced to this SDN World and I am very much impressed with the extent of help that is available here.
    Could some one mail me the step by step procedure and the enhancement process (Pls explain with some example,screen shots will be appreciated), the method of populating data into new fields. I went thru Roberto blogs and to some extent i am ok.Pls throw more light on this scenarios from ur experiences.
    Mail ID: [email protected]
    All good luck to everyone.
    Thanks,
    Prathibha.

    Also check out...
    How to make added custom field Delta mechanism work for LO Cookpit?
    Regarding Enhancing LO Data Source.
    PLUG-INs & Data source Enhancements
    changing the datasource of LO cockpit inR/3..need a backup plan
    Enhancement issue somebody clarify plz
    assign points if useful ***
    Thanks,
    Raj

  • BI Administration Cockpit - Empty templates in portal

    Hi,
    Has anyone experienced the following problem:
    - The BI Admin. Cockpit has been installed according to instructions without errors
    - The technical content as well as the process chains are working and data is being collected from the objects pointed in RSDDSTAT
    - The Business Pacakge "BI Administration 1.0" has been installed.
    - Both roles (BI Admin. & System Admin.) have been assigned in portal and BI Admin -role has been assigned to user in SSM.
    - The BI Admin. tab page is visible in portal and all of the IViews and pages are available in the portal content.
    - If the queries or the templates are executed from BEx or WAD they are populated with data and everything is working as it should be.
    - Even when executing the IViews or pages (f.ex. No. of BI Application Executions per User) in PREVIEW -mode from Portal Content Studio the reports are shown correctly.
    HOWEVER: If one navigates to BI-Admin tab --> BI Usage Statistics --> BI Application Usage Statistics -report, both of the expected reports are just missing. The only things that are shown  are the templates (tab strip and buttons) but the queries are missing.
    There are no error messages etc. Please advice how to proceed with further investigations?
    -Miikka

    Hi All,
    We are planning to install BI Admin Cockpit in our BI system as well. We found a lot of PDF documents on SDN, but they are more on the general terms. Can anyone share their real time experiences, plan and the exact startegy step by step to be followed to install Admin cockpit and how to use it?
    The Technical content is already installed on our system and the Process chains are also scheduled for the same for more than a year now. What we are missing is the exact real time plan with the steps to be done to have this?
    It would be of great help if we have this.
    Regards,
    Suman Pitta

  • BW Statistics vs. BI Administration Cockpit

    Hi to All,
    A question for all the guru's out there.
    I'm new to 2004s (who isn't). I used to work with BW Statistics on 3.5.
    We received our first BI 7.0 system last week.
    As a general prep i want to activate BW statistics on this 2004s system.
    I got the following question: 
    When i look at the BI Content i see that most of the content of BW statistics (part of the multiprovider 0BWTC_C10) i know (not all) is in the infoarea named "BW statistics 3.5 (No longer install)"
    What part of BW statistics is useful to install, just the BI statistics (without the "old" 3.5 elements) so these can be used within the BI administration cockpit?
    Thanx in advance!

    Hi Rene,
    All the 0TCT* stuff.
    You can check all the steps to take in SPRO > SAP NetWeaver > Business Intelligence > Settings for BI Content > Business Intelligence > BI Administration Cockpit.
    Best Regards,
    Pieter

  • Db50 step by step procedure

    hi
    i am new to sap netweaver.
    i am looking for a guide or document which has step by step configuration of db50 for data backup on daily basis.
    if someone can help me guide me.

    Hello Omerfarooq,
    ->For SAP MAXDB documentation please see the SAP note 767598.
    ->Please review the SAP notes:
    820824       FAQ: SAP MaxDB/liveCache technology
    990602       FAQ: CCMS for MaxDB/SAP liveCache technology
    1377148    FAQ: SAP MaxDB backup/recovery
    846890    FAQ: SAP MaxDB Administration 
    ->You can use the scheduling  calendar (CCMS transaction DB13 or DB13C in  in WebAS 6.*) to schedule a backup for a particular point in time and execute it implicitly.  
    As of WebAs 7.00, the administration is carried out with transaction
    DBACOCKPIT or DB50   -> Tools  - > DBA Planning Calendar. 
    ->u201CDBA Planning Calendaru201D documentation available at
    http://maxdb.sap.com/doc/7_7/default.htm -> Concepts of the Database System ->
    Database Tools -> DBA Cockpit
    Thank you and best regards, Natalia Khlopina

  • BI Administration Cockpit - Implement

    Hi All,
    Our system is BI 7.0. Recently we did the technical upgrade. BI Statistics related chains are running on our machine daily. Now we are thinking on the lines of implementing "BI Administration cockpit" on our BI system. I have a few questions:
    What is the concept and use of it?
    What are the prerequisites?
    What are the steps required to implement the same?
    Efforts required to install "BI Administration cockpit"?
    Best practices for the same.
    Appreciate if I get the above details to kick start the analysis?
    Regards,
    Suman Pitta

    Hi Suman ,
    1. Admincockpit will help you in analysing the statistics of BI objects .
    Ex - In your BI system , the users execute queries , workbooks , webtemplates , infopackages , process chains , dtps and other BI objects  and you want to judge their statistics (which query was execute the most in your system ,who are the users who executed them , which query is taking the highest time to execute and so on ) .
    The BI Admin cockpit will  give you the statistics of all BI objects that are being executed in your system .
    Advantages :
    1.You can check which query had the highest execution time and you can improve its performance .
    2. Who are the users who executed the queries and who are the users who account for the most  query execution time .
    3. RRIs are build upon the admincockpit queries which gives you the advantage of drilling down to underneath objects . So suppose you selected a query with the highest runtime , from the query itself you can go to the infoprovider upon which the query is build .
    4. You just login to your portal and navigate to
         System Administration-> Monitoring -> Business Intelligence
      And you can view all your BI Statistics over there for the selected system  . Just select your BI system in the BI System selection window and all the statistics for that system are being  displayed . So without logging in to your BI system you are able to view the statistics of all systems from one single place .
    Disadvantages :
    1. The only thing i guess is  they will take up some space in your database as statistics records are generated every time you execute any Object . So you need to cleanup the underlying tables at particular time-periods .  BI Admincockpit also provided settings/options for data deletion from underlying tables .
    Hope this information would give you an overview of the Admincockpit.
    Regards,
    Lokesh

  • Windows 7 x64 on 2009 MB, step-by-step instructions and solutions

    ok, after spending days on this with about 10+ clean installs on 2 different machines and searching forums about various problems, i'm going to go step by step in a flow-chart like manner to describe the steps and various pitfalls in getting windows 7 ultimate 64 bit installed correctly on a macbook (late 2009)...most of this i didn't figure out on my own, this is a compilation of solutions found by others. i'll try and link or credit anyone i can, but honestly can't remember where i saw all of this. part of this is to share my days of frustration to try and save someone some time. also, in case i have to do this again, i want a record of it so i don't have to start from scratch next time.
    i don't have everything working perfectly, but i have wireless and sound, but not sure if all the drivers are up to date. i'm still working on the headphone issue, i don't have sound yet with headphones, but i got the speakers to work.
    i'm going to preface this by saying that windows 7 is a horrible piece of software, i'm only helping a friend do it because she's an architect and needs autocad, but she wants a mac for daily use. also, i'm doing this from a spanish install of windows 7 (here in south america), so it's a pain to translate this cruddy convoluted OS into english as i'm not familiar with windows 7 anyway, so i'll do my best. i'm not a pc expert. also going to say that the windows 7 x86 and x64 installs i've done on a couple macbook pro 15's seems to work much better (full trackpad functionality, expose works) and without as many problems...i don't know why it doesn't seem to work as well in x64 on the macbook, i'm still investigating.
    also, i want to say that a fresh (first-time) bootcamp partition with windows install after a clean mac os x install seems to produce the best results. i say this because i wasn't happy with all the hacks in my first couple attemtps, so i erased the bootcamp partitions and re-created them to re-install windows 7 again. but i started experiencing some peculiarities that never happened in the first install after a clean Mac OS X install. it's as if the computer leaves artifacts from previous installs and acts funny. also, reboots and start-up times seem to be slower now than when it was a first-time fresh install. anyway, i'll try and outline all the weirdness here, indicated by asterisks *
    SO, HERE GOES:
    1) Go to Bootcamp Utility > Create Bootcamp partition
    2) Afterwards, this should take you to a restart into the windows install dvd....if install dvd boots fine, skip to step 3
    ** if you get a gray screen (happened to me after subsequent re-install attempts), you have to power off and reboot holding down "C" key to boot from the dvd...or you can hold down alt/opt key to get the icons of bootable volumes, at this point it should be mac os x and the windows dvd. the point is, force it to boot from the dvd if it hangs on re-start.
    3) Windows install should start. Select language, etc....You should then get to a screen listing all the partitions (should be 3 of them). Choose the Bootcamp partition and format (erase) it to proceed with the install.
    4) Windows should start installing all the files and will reboot a couple times, here's where things get weird possibly. On the first attempt at installing Windows 7, the install went smoothly on restart.
    ** some of you might get a blinking cursor and a black screen that goes on forever. Supposedly this is a bug in Windows 7, having to do with video drivers or something. I don't understand because my first install attempt, it rebooted just fine and the installation continued.
    anyway, what you have to do here if you get the forever-black screen is power down the machine with the power button and restart holding the alt/option key. this time when you get the bootable volumes on the gray screen, choose the Windows partition, which will now appear. DON'T boot up from the DVD. upon restart into Windows, you should be back in the installation process and it will attempt to finish the install here.
    it might be my imagination, but once i had to reboot into the dvd here to actually finish the install. technically Windows is not finished installing at this step, you just have to figure out how to get past the black screen to finish the install. try both.
    5) Windows should go back to where it left off before the restart, then finish the install.....and restart AGAIN. On my first attempt, the restart went smoothly and started the "first time user" process...
    ** some of you will get the black screen YET AGAIN, this happened to me on my subsequent attempts at re-installing Windows. again, you need to power off and start up holding the alt/option key, choose the Windows partition and it should take you to the "first time user configuration" process....since at this point, windows is indeed installed.
    6) Here you will fill out all your information, product key, etc...and get into Windows. Here you will have some other problems.
    Problem #1: you have no drivers to run Windows on your Mac, so you will need to install Bootcamp in windows from your Mac OS X install dvd
    Problem #2: you have no "right click", because you don't have drivers, so you might not be able to eject the Windows dvd to put in the Mac dvd
    Solutions: you can't control-click or right click, BUT YOU CAN hover over the DVD drive ( "D:" in your computer, my PC or whatever it's called in english) and see if there's an "eject disc" option.
    for some reason, my Windows dvd was spinning and not being recognized, so i just rebooted (alt/option) into Mac OS X and ejected the disc there. the point is, you need to eject the Windows disc and put in the Mac OS X install disc to access Bootcamp for Windows.
    7) Reboot into Windows (if you had to boot into Mac to eject the disc). Insert Mac OS X install disc. Navigate to BootCamp setup.exe and run it.
    ** the first time i did this, it ran no problem. but in subsequent attempts, it gave me the "x64 not supported by this computer" message that everyone seems to encounter. there is a bypass for this outlined here:
    http://www.techulous.com/hardware/how-to-apple-boot-camp-64-bit-for-windows-7-on -unsupported-macs.html
    8) Ok, so now you should have Bootcamp 3.0 installed. Now you need to update it with Bootcamp 3.1 update. Download it here and run it. This is required for 64 bit support, I believe this is the link:
    http://support.apple.com/kb/dl979
    ** hopefully you don't have problems, i didn't, so you might have to search the forums since i can't anticipate what might happen here, it worked for me every time.
    9) Ok, i think it might reboot after the update install. Now you have Bootcamp installed and most of the drivers you need, however not everything works. Some of the drivers will be out of date.
    Problem #1: you may or may not have updated nvidia drivers. mine are ok, but check nvidia website if you have doubts. most of their drivers are for PC hardware, however, so the ones on the bootcamp disk and update should be fine.
    Problem #2: almost everyone has wi-fi connectivity problems. it has to do with the wrong/outdated broadcom drivers from bootcamp. i will outline how i got it to work (based on someone else's solution i found in some forum or other).
    Problem #3: almost everyone is having sound issues. i'll explain what i did. i still have no sound coming out of the headphone jack, i'm working on that next. but i have speaker sound and no red light coming out of the headphone jack.
    ** first of all, you should probably download firefox from internet explorer in windows, then update adobe flash, it's a pain....i used another computer to download the drivers, then transfered them by USB drive, but you can do it however u want.
    Solution to wi-fi: ok, not sure where i got this information, but i downloaded HP drivers in a file called "sp45524.exe"....here's the link:
    http://www.wireless-driver.com/download/hp/hp-broadcom-wireless-lan-windows7-dri ver-v560188.htm
    apparently the broadcom drivers in Bootcamp 3.0 and 3.1 update won't install on Windows 7 x64 for some reason, lot of people are getting "code 10".
    what i did is this:
    9a) run the .exe file, it will create a folder called SWSetup\SP45524 that will house the drivers. there's a setup file in that folder, i didn't try it. perhaps it will install from there, but everything i read suggested a different step. ** if you run the set up file, you may have to run as administrator, or use the "troubleshoot compatibility" trick to get it to work.
    9b) Go to Control Panel > Hardware and Sound > Device Manager > Network adapters
    you should uninstall or deactivate any drivers you have. if it's not showing any wi-fi adapter, right click and "check for new hardware" (not sure how it's translated into english from spanish)....you should have an unknown device pop up with the yellow icon and exclamation mark. double click on that, assign it as a network adapter.
    when you get to the driver tabs, you can install it from there. this is where it gets tricky. click "install driver", "check drivers on this computer", "choose from a list of drivers on this computer", "use disc", and in the dialogue box ("install from disc" that says "copy manufacturers files from", navigate to the C: SWSetup|SP45524 folder and click until you can accept. this will load up a different list of drivers.
    (sorry, i'm translating the Windows from spanish to english, and i'm not familiar with exactly what they say in english, so you'll just have to use your imagination)
    you should now have a small list of drivers. personally, i chose the first one on the list "Wi-Fi adapter Broadcom 43224AG 802.11a/b/g/draft-n", but the second one worked also. again, i'm doing this on a late 2009 white macbook (6.1) and it works. according to the date of the driver, it seems like it might not even be the most current and might be older than the one that's on the MAC OS X install disc, but none of the ones on the disc work. this one does. (thanks to whoever found this out, i can't find the original link of the post with this driver reference).
    Solutions to sound: ok, there are multiple posts on this, everything from updating realtek to sigmatel...personally what worked for me was to download the most current Cirrus Logic drivers.
    everyone has been pointing to this post:
    http://www.stuffedcow.net/macbook_audio
    it doesn't really tell you what to do exactly. i'm not even sure what to do, but here's what i did. actually, i downloaded what was supposed to be the CS4207 driver here:
    http://www.cirrus.com/en/products/pro/detail/P1233.html
    then i followed the same procedure as before with the network adapter driver...."install driver", "check drivers on this computer", "choose from a list of drivers on this computer", "use disc", and in the dialogue box ("install from disc" that says "copy manufacturers files from", navigate to the folder you just downloaded from the above link.
    you should have an updated list of drivers. what i don't understand is that the Cirrus site lists the most current driver as CS4207, but the only thing that has 4207 in it starts with CDB. in any case, i chose the last one on the list, CS4206A (AB 99).
    i have no idea why i chose that, it just seemed to be the most current. in any case, sound works now.
    Ok, i tested all this stuff in skype. wifi, microphone and speakers work, isight works. however, still no headphone sound. so if anyone knows how to fix that, please let me know. i haven't gotten to that part yet. but i've spent like over a week trying to figure this out. windows 7 is so horrible that there seems to be so many steps to getting it just right, and i just found myself starting all over (i didn't mention the nightmare with license breaks with AutoCad due to windows reading the clock differently...that's another hack that i had to deal with...and failure meant re-installing everything).
    ok, off to bed now....

    Windows 7 x64 all updates
    Just doublechecking. Does that include the recent chkdsk hotfixes?
    [The Chkdsk.exe program does not start correctly on a Windows 7-based computer|http://support.microsoft.com/kb/975778]

  • Oracle 10gR2 WebService Call-In & Call-Out via PL/SQL (Step-by-Step Guide)

    Hi Everyone,
    This guide is for those of you who tried to Call-In and Call-Out WebService via Oracle 10gR2 using PL/SQL but failed a couple of times, re-installed a couple of times and retry, got it to work but don't know what made it work scenarios.
    Hope this helps ;-)
    Thanks,
    Henry Wu
    Instructions on how to use Oracle10gR2 Webservice Call-Out feature (Oracle JAX-RPC DII - Dynamic Invocation (DII) APIs)
    PREREQUISITE
    =================================================================
    1. Download Oracle Database 10g Release 2 (10.2.0.1.0) (ZIP, ~655MB)
    http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201winsoft.html
    http://download.oracle.com/otn/nt/oracle10g/10201/10201_database_win32.zip
    1.1 Choose Enterprise Edition
    2. Download 10.1.3.1 Callout Utility for 10g (R1 +R2) RDBMS (ZIP, ~13MB)
    http://download.oracle.com/technology/sample_code/tech/java/jsp/dbws-callout-utility-10131.zip
    2.1 Extract to C:\oracle\product\10.2.0\db_1\dbws_callout_utility_10131
    3. Download OC4J Standalone - Oracle Containers for J2EE (OC4J) 10g Release 3 (10.1.3.3) (ZIP, ~93MB; Pure Java—runs on all certified platforms)
    http://www.oracle.com/technology/software/products/ias/index.html (Download Site)
    http://download.oracle.com/otn/java/oc4j/101330/oc4j_extended_101330.zip
    3.1 Extract to C:\oracle\product\10.2.0\db_1\oc4j_extended_101330
    STEP-BY-STEP PROCEDURES
    =================================================================
    1. Prepare the database
    1.1 Connect to SYS account (or any account that can connect as SYSDBA)
    1.2 alter system set shared_pool_size=96M scope=both
    1.3 alter system set java_pool_size=80M scope=both
    1.4 ALTER USER SCOTT ACCOUNT UNLOCK;
    1.5 ALTER USER SCOTT IDENTIFIED BY "tiger";
    1.6 ALTER USER SCOTT QUOTA UNLIMITED ON USERS;
    1.7 GRANT PUBLIC TO SCOTT;
    1.8 GRANT Create Public Synonym TO SCOTT;
    2. Load Oracle SOAP client to SCOTT (for Oracle 10g Release 2 Database)
    2.1 Commands
    2.1.1 Open command prompt (cmd.exe)
    2.1.2 loadjava -u scott/tiger -r -v -f -genmissing -s -grant public C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\webservices\lib\soap.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\lib\dms.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\jlib\javax-ssl-1_1.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\lib\servlet.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\lib\mail.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\lib\activation.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\lib\http_client.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\lib\ejb.jar
    2.1.3 It will take around 3 minutes and you will see "something" like the following when it completes (count may not be exact) :
    Classes Loaded: 909
    Resources Loaded: 75
    Sources Loaded: 0
    Published Interfaces: 0
    Classes generated: 0
    Classes skipped: 0
    Synonyms Created: 984
    Errors: 0
    2.1.3 Close this command prompt
    3. Load Oracle JAX-RPC client to SYS (for Oracle 10g Release 2 Database)
    3.1 Commands
    3.1.1 Open command prompt (cmd.exe)
    3.1.2 loadjava -u sys/oracle -r -v -f -genmissing -s -grant public C:\oracle\product\10.2.0\db_1\dbws_callout_utility_10131\sqlj\lib\dbwsclientws.jar C:\oracle\product\10.2.0\db_1\dbws_callout_utility_10131\sqlj\lib\dbwsclientdb102.jar
    3.1.2.1 It will take around 15 minutes and you will see "something" like following when it completes (count may not be exact) :
    Classes Loaded: 4027
    Resources Loaded: 81
    Sources Loaded: 0
    Published Interfaces: 0
    Classes generated: 61
    Classes skipped: 0
    Synonyms Created: 4108
    Errors: 0
    3.1.3 Close this command prompt
    4. Execute UTL_DBWS packages to SYS (for Oracle 10g Release 2 Database)
    4.1 Commands
    4.1.1 Connect to SYS account only
    4.1.2 Execute the following (in TOAD you should execute them as Script, press the "thunder" button)
    4.2.1 @"C:\oracle\product\10.2.0\db_1\dbws_callout_utility_10131\sqlj\lib\utl_dbws_decl.sql"
    4.2.2 @"C:\oracle\product\10.2.0\db_1\dbws_callout_utility_10131\sqlj\lib\utl_dbws_body.sql"
    4.2.3 CREATE PUBLIC SYNONYM utl_dbws FOR sys.utl_dbws;
    5. Call-out a free Web Service using SCOTT
    5.1 Commands
    5.1.1 Connect to user SCOTT with password of TIGER
    5.1.2 Copy and Paste the following "Anonymous Block" (sample #1) and execute it :
    5.1.2.1 It sould return "PL/SQL DII client return ===> Redwood City"
    declare
    service_ utl_dbws.SERVICE;
    call_ utl_dbws.CALL;
    service_qname utl_dbws.QNAME;
    port_qname utl_dbws.QNAME;
    operation_qname utl_dbws.QNAME;
    string_type_qname utl_dbws.QNAME;
    retx ANYDATA;
    retx_string VARCHAR2(1000);
    retx_double number;
    retx_len number;
    params utl_dbws.ANYDATA_LIST;
    l_input_params utl_dbws.anydata_list;
    l_result ANYDATA;
    l_namespace VARCHAR2(1000);
    begin
    -- open internet explorer and navigate to http://webservices.imacination.com/distance/Distance.jws?wsdl
    -- search for 'targetNamespace' in the wsdl
    l_namespace := 'http://webservices.imacination.com/distance/Distance.jws';
    -- search for 'service name' in the wsdl
    service_qname := utl_dbws.to_qname(l_namespace, 'DistanceService');
    -- this is just the actual wsdl url
    service_ := utl_dbws.create_service(HTTPURITYPE('http://webservices.imacination.com/distance/Distance.jws?wsdl'), service_qname);
    -- search for 'portType name' in the wsdl
    port_qname := utl_dbws.to_qname(l_namespace, 'Distance');
    -- search for 'operation name' in the wsdl
    -- there will be a lot, we will choose 'getCity'
    operation_qname := utl_dbws.to_qname(l_namespace, 'getCity');
    -- bind things together
    call_ := utl_dbws.create_call(service_, port_qname, operation_qname);
    -- default is 'FALSE', so we make it 'TRUE'
    utl_dbws.set_property(call_, 'SOAPACTION_USE', 'TRUE');
    -- search for 'operation soapAction' under <wsdl:operation name="getCity">
    -- it is blank, so we make it ''
    utl_dbws.set_property(call_, 'SOAPACTION_URI', '');
    -- search for 'encodingstyle' under <wsdl:operation name="getCity">
    utl_dbws.set_property(call_, 'ENCODINGSTYLE_URI', 'http://schemas.xmlsoap.org/soap/encoding/');
    -- search for 'binding style'
    utl_dbws.set_property(call_, 'OPERATION_STYLE', 'rpc');
    -- search for 'xmlns:xs' to know the value of the first parameter
    -- under <wsdl:message name="getCityResponse"> you will see the line <wsdl:part name="getCityReturn" type="xsd:string" />
    -- thus the return type is 'string", removing 'xsd:'
    string_type_qname := utl_dbws.to_qname('http://www.w3.org/2001/XMLSchema', 'string');
    -- in the line <wsdl:operation name="getCity" parameterOrder="zip">
    -- the parameterOrder is 'zip', thus we put in 'zip'
    -- the 'ParameterMode.IN' is used to specify that we will be passing an "In Parameter" to the web service
    -- the 'ParameterMode.IN' is a constant variable in the sys.utl_dbws package
    utl_dbws.add_parameter(call_, 'zip', string_type_qname, 'ParameterMode.IN');
    utl_dbws.set_return_type(call_, string_type_qname);
    -- supply the In Parameter for the web service
    params(0) := ANYDATA.convertvarchar('94065');
    -- invoke the web service
    retx := utl_dbws.invoke(call_, params);
    -- access the returned value and output it to the screen
    retx_string := retx.accessvarchar2;
    dbms_output.put_line('PL/SQL DII client return ===> ' || retx_string);
    -- release the web service call
    utl_dbws.release_service(service_);
    end;
    5.1.3 Copy and Paste the following "Anonymous Block" (sample #2) and execute it :
    5.1.3.1 It should return "PL/SQL DII client return ===> twelve thousand three hundred and forty five"
    declare
    service_ utl_dbws.SERVICE;
    call_ utl_dbws.CALL;
    service_qname utl_dbws.QNAME;
    port_qname utl_dbws.QNAME;
    operation_qname utl_dbws.QNAME;
    string_type_qname utl_dbws.QNAME;
    retx ANYDATA;
    retx_string VARCHAR2(1000);
    retx_double number;
    retx_len number;
    params utl_dbws.ANYDATA_LIST;
    l_input_params utl_dbws.anydata_list;
    l_result ANYDATA;
    l_namespace VARCHAR2(1000);
    begin
    -- open internet explorer and navigate to http://www.dataaccess.com/webservicesserver/numberconversion.wso?WSDL
    -- search for 'targetNamespace' in the wsdl
    l_namespace := 'http://www.dataaccess.com/webservicesserver/';
    -- search for 'service name' in the wsdl
    service_qname := utl_dbws.to_qname(l_namespace, 'NumberConversion');
    -- this is just the actual wsdl url
    service_ := utl_dbws.create_service(HTTPURITYPE('http://www.dataaccess.com/webservicesserver/numberconversion.wso?WSDL'), service_qname);
    -- search for 'portType name' in the wsdl
    port_qname := utl_dbws.to_qname(l_namespace, 'NumberConversionSoap');
    -- search for 'operation name' in the wsdl
    -- there will be a lot, we will choose 'NumberToWords'
    operation_qname := utl_dbws.to_qname(l_namespace, 'NumberToWords');
    -- bind things together
    call_ := utl_dbws.create_call(service_, port_qname, operation_qname);
    -- default is 'FALSE', so we make it 'TRUE'
    utl_dbws.set_property(call_, 'SOAPACTION_USE', 'TRUE');
    -- search for 'operation soapAction' under <operation name="NumberToWords">
    -- it is blank, so we make it ''
    utl_dbws.set_property(call_, 'SOAPACTION_URI', '');
    -- search for 'encodingstyle'
    -- cannot find xml tag 'encodingstyle', so we just use the following as the generic encoding style
    utl_dbws.set_property(call_, 'ENCODINGSTYLE_URI', 'http://schemas.xmlsoap.org/soap/encoding/');
    -- search for 'binding style'
    -- although 'document' was used, it produced an error, thus we will use 'rpc'
    -- this value is generally only 'document' or 'rpc'
    utl_dbws.set_property(call_, 'OPERATION_STYLE', 'rpc');
    -- search for 'xmlns:xs' to know the value of the first parameter
    -- under <xs:element name="NumberToWords"> you will see the line <xs:element name="ubiNum" type="xs:unsignedLong" />
    -- thus the return type is 'unsignedlong', removing 'xs:'
    -- however, upon testing, using 'unsignedlong' produced an error, while 'string' did not, so we will use 'string'
    string_type_qname := utl_dbws.to_qname('http://www.w3.org/2001/XMLSchema', 'string');
    -- under <xs:element name="NumberToWords"> you will see the line <xs:element name="ubiNum" type="xs:unsignedLong" />
    -- the element name is 'ubiNum', thus we put in 'ubiNum'
    -- the 'ParameterMode.IN' is used to specify that we will be passing an "In Parameter" to the web service
    -- the 'ParameterMode.IN' is a constant variable in the utl_dbws package
    utl_dbws.add_parameter(call_, 'ubiNum', string_type_qname, 'ParameterMode.IN');
    utl_dbws.set_return_type(call_, string_type_qname);
    -- supply the In Parameter for the web service
    params(0) := ANYDATA.convertvarchar('12345');
    -- invoke the web service
    retx := utl_dbws.invoke(call_, params);
    -- access the returned value and output it to the screen
    retx_string := retx.accessvarchar2;
    dbms_output.put_line('PL/SQL DII client return ===> ' || retx_string);
    -- release the web service call
    utl_dbws.release_service(service_);
    end;
    NOTES AND REFERENCES
    =================================================================
    This detailed step-by-step guide was produced with the following guide http://www.oracle.com/technology/sample_code/tech/java/jsp/callout_users_guide.htm
    I could still not load Oracle JAX-RPC client to SCOTT (step 4) as it produces an error. See the following for more details :
    http://forums.oracle.com/forums/thread.jspa?threadID=633219&tstart=0
    Also, I could not consume some of the other free Web Services out there for reasons I don't know, hope someone can help clarify. See the following for more details :
    http://forums.oracle.com/forums/thread.jspa?threadID=630733&tstart=0
    >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
    >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
    >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
    Instructions on how to use Oracle10gR2 Webservice Call-In feature
    PREREQUISITE
    =================================================================
    1. Download Oracle Database 10g Release 2 (10.2.0.1.0) (ZIP, ~655MB)
    http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201winsoft.html
    http://download.oracle.com/otn/nt/oracle10g/10201/10201_database_win32.zip
    1.1 Choose Enterprise Edition
    2. Download OC4J Standalone - Oracle Containers for J2EE (OC4J) 10g Release 3 (10.1.3.3) (ZIP, ~93MB; Pure Java—runs on all certified platforms)
    http://www.oracle.com/technology/software/products/ias/index.html (Download Site)
    http://download.oracle.com/otn/java/oc4j/101330/oc4j_extended_101330.zip
    2.1 Extract to C:\oracle\product\10.2.0\db_1\oc4j_extended_101330
    STEP-BY-STEP PROCEDURES
    =================================================================
    1. Connect to SYS account and create user STORE
    CREATE USER store IDENTIFIED BY store;
    GRANT connect, resource TO store;
    2. Connect to Oracle using the user STORE and password STORE
    CONNECT store/store;
    3. Execute the following objects for this excercise
    CREATE SEQUENCE order_sq;
    CREATE TABLE product_types (
    product_type_id INTEGER
    CONSTRAINT product_types_pk PRIMARY KEY,
    name VARCHAR2(10) NOT NULL
    CREATE TABLE products (
    product_id INTEGER
    CONSTRAINT products_pk PRIMARY KEY,
    product_type_id INTEGER
    CONSTRAINT products_fk_product_types
    REFERENCES product_types(product_type_id),
    name VARCHAR2(30) NOT NULL,
    description VARCHAR2(50),
    price NUMBER(5, 2)
    CREATE TABLE customers (
    customer_id INTEGER
    CONSTRAINT customers_pk PRIMARY KEY,
    first_name VARCHAR2(10) NOT NULL,
    last_name VARCHAR2(10) NOT NULL,
    dob DATE,
    phone VARCHAR2(12)
    CREATE TABLE orders (
    order_id INTEGER
    CONSTRAINT orders_pk PRIMARY KEY,
    product_id INTEGER
    CONSTRAINT purchases_fk_products
    REFERENCES products(product_id),
    customer_id INTEGER
    CONSTRAINT purchases_fk_customers
    REFERENCES customers(customer_id),
    quantity INTEGER NOT NULL
    INSERT INTO customers (
    customer_id, first_name, last_name, dob, phone
    ) VALUES (
    1, 'John', 'Brown', '01-JAN-1965', '800-555-1211'
    INSERT INTO product_types (
    product_type_id, name
    ) VALUES (
    1, 'Book'
    INSERT INTO products (
    product_id, product_type_id, name, description, price
    ) VALUES (
    1, 1, 'Modern Science', 'A description of modern science', 19.95
    COMMIT;
    CREATE OR REPLACE PACKAGE dbfunc AS
    FUNCTION place_order (
    p_product_id INTEGER,
    p_customer_id INTEGER,
    p_quantity INTEGER
    RETURN VARCHAR2;
    END dbfunc;
    CREATE OR REPLACE PACKAGE BODY dbfunc AS
    FUNCTION place_order (
    p_product_id INTEGER,
    p_customer_id INTEGER,
    p_quantity INTEGER
    RETURN VARCHAR2 IS
    v_customer_count INTEGER;
    v_product_count INTEGER;
    v_order_id INTEGER;
    BEGIN
    -- count the number of products with the
    -- supplied p_product_id (should be 1 if the product exists)
    SELECT COUNT(*)
    INTO v_product_count
    FROM products
    WHERE product_id = p_product_id;
    IF v_product_count = 0 THEN
    RETURN 'No such product';
    END IF;
    -- count the number of customers with the
    -- supplied p_customer_id (should be 1)
    SELECT COUNT(*)
    INTO v_customer_count
    FROM customers
    WHERE customer_id = p_customer_id;
    IF v_customer_count = 0 THEN
    RETURN 'No such customer';
    END IF;
    -- get the next value from orders_sq
    SELECT order_sq.nextval
    INTO v_order_id
    FROM dual;
    -- place the order
    INSERT INTO orders (
    order_id, product_id, customer_id, quantity
    ) VALUES (
    v_order_id, p_product_id, p_customer_id, p_quantity
    COMMIT;
    RETURN 'Order placed with id of ' || v_order_id;
    EXCEPTION
    WHEN OTHERS THEN
    ROLLBACK;
    RETURN 'Order not placed';
    END place_order;
    END dbfunc;
    4. Install and Configure OC4J
    4.1 Change Directory
    4.1.1 Open command prompt (cmd.exe)
    4.1.2 CD C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\bin
    4.2 Configure Environment variables (type in command prompt)
    4.2.1 set JAVA_HOME=C:\oracle\product\10.2.0\db_1\jdk
    4.2.2 set ORACLE_HOME=C:\oracle\product\10.2.0\db_1\oc4j_extended_101330
    4.3 Starting OC4J for the first time
    4.3.1 oc4j -start
    4.3.2 If this is not your first time to "start" oc4j, go to step 4.3.4
    4.3.3 Set oc4jadmin password (use the password "oracle" w/o the quotation marks)
    08/03/21 17:13:54 Set OC4J administrator's password (password text will not be displayed as it is entered)
    Enter password:
    Confirm password:
    Confirm password: The password for OC4J administrator "oc4jadmin" has been set.
    08/03/21 17:14:01 The OC4J administrator "oc4jadmin" account is activated.
    4.3.4 OC4J has started if you see the message :
    08/03/21 17:14:16 Oracle Containers for J2EE 10g (10.1.3.3.0) initialized
    4.3.5 Leave this command prompt open
    4.4 Configure Data Source
    4.4.1 Open a new command prompt via the cmd.exe command
    4.4.2 type "hostname" and then press enter
    4.4.3 Keep this command prompt open for later use
    4.4.4 Open Windows Explorer and navigate to the folder C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\config
    4.4.5 Open the file data-sources.xml
    4.4.6 Modify and Save the file so that it will look something like the following :
    4.4.6.1 Note that "hpv2710us" is my hostname found in step 4.4.2
    4.4.6.2 Note that "ORCLDEV" is the name of my Oracle Instance. (Default installation uses ORCL only)
    <connection-pool name="Example Connection Pool">
    <connection-factory factory-class="oracle.jdbc.pool.OracleDataSource"
    user="store"
    password="store"
    url="jdbc:oracle:thin:@//hpv2710us:1521/ORCLDEV">
    </connection-factory>
    </connection-pool>
    4.4.7 Close the text editor
    4.4.8 Close the Windows Explorer
    4.4.9 Close this command prompt (type exit)
    5. Publishing a PL/SQL Package as a Database Web Service
    5.1 Create the config.xml file
    5.1.1 Open Notepad.exe
    5.1.2 Copy and Paste the following :
    5.1.2.1 Note that "hpv2710us" is my hostname found in step 4.4.2
    5.1.2.2 Note that "ORCLDEV" is the name of my Oracle Instance. (Default installation uses ORCL only)
    <web-service>
    <display-name>PLSQL Web Service</display-name>
    <description>PLSQL Sample</description>
    <destination-path>./dbfunc.ear</destination-path>
    <temporary-directory>/tmp</temporary-directory>
    <context>/plsqlsample</context>
    <stateless-stored-procedure-java-service>
    <jar-generation>
    <schema>store/store</schema>
    <db-url>jdbc:oracle:thin:@hpv2710us:1521:ORCLDEV</db-url>
    <prefix>db.func.place.order</prefix>
    <db-pkg-name>dbfunc</db-pkg-name>
    </jar-generation>
    <uri>/dbfunc</uri>
    <database-JNDI-name>jdbc/OracleDS</database-JNDI-name>
    </stateless-stored-procedure-java-service>
    <wsdl-gen>
    <wsdl-dir>wsdl</wsdl-dir>
    <option name="force">true</option>
    <option name="httpServerURL">http://localhost:8888</option>
    </wsdl-gen>
    <proxy-gen>
    <proxy-dir>proxy</proxy-dir>
    <option name="include-source">true</option>
    </proxy-gen>
    </web-service>
    5.1.3 Save file as config.xml in the directory C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\config
    5.1.3.1 Note it should be config.xml and not config.txt
    5.1.4 Close the text editor
    5.2 Publish dbfunc Oracle Package as a Web Service
    5.2.1 Open a new command prompt via the cmd.exe command
    5.2.2 CD C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home
    5.2.3 mkdir ear
    5.2.4 CD ear
    5.2.5 set ORACLE_HOME=C:\oracle\product\10.2.0\db_1\oc4j_extended_101330
    5.2.6 set CLASSPATH=.;%ORACLE_HOME%\webservices\lib\wsdl.jar;%ORACLE_HOME%\lib\xmlparserv2.jar;%ORACLE_HOME%\soap\lib\soap.jar
    5.2.7 java -jar %ORACLE_HOME%\webservices\lib\WebServicesAssembler.jar -config C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\config\config.xml
    Please wait ...
    STORE.DBFUNC
    5.2.8 java -jar %ORACLE_HOME%\j2ee\home\admin_client.jar deployer:oc4j:localhost:23791 oc4jadmin oracle -deploy -file C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\ear\dbfunc.ear -deploymentName dbfunc
    08/03/21 17:46:23 Notification ==>Application Deployer for dbfunc COMPLETES. Operation time: 296 msecs
    5.2.9 java -jar %ORACLE_HOME%\j2ee\home\admin_client.jar deployer:oc4j:localhost:23791 oc4jadmin oracle -bindWebApp -appname dbfunc -webModuleName dbfunc_web
    5.2.10 java -jar %ORACLE_HOME%\j2ee\home\admin_client.jar deployer:oc4j:localhost:23791 oc4jadmin oracle -bindAllWebApps -appname dbfunc
    5.2.11 Close this command prompt (type exit)
    6. Test dbfunc Web Service
    6.1 Restart OC4J
    6.1.1 Open the command prompt you used to start OC4J in step 4.1.1/4.3.1
    6.1.2 In the keyboard, hit Ctrl+C
    6.1.2.1 Type "Y" and then hit Enter
    08/03/21 18:02:51 Shutting down OC4J...
    Terminate batch job (Y/N)? Y
    6.1.2.2 Note that the command prompt should still be open
    6.1.2.2.1 If you accidentally closed the command prompt just do the following
    6.1.2.2.1.1 Do 4.1.1 to 4.2.2 and then proceed to 6.1.3
    6.1.3 oc4j -start
    Starting OC4J from C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home...
    08/03/21 18:07:57 Oracle Containers for J2EE 10g (10.1.3.3.0) initialized
    6.1.4 Leave this command prompt open
    6.2 Use the Web Service to "Order an Item"
    6.2.1 Connect to Oracle using the user STORE and password STORE
    6.2.2 select * from orders
    6.2.2.1 Zero row should return
    6.2.3 Open Internet Explorer
    6.2.4 Navigate to http://localhost:8888/plsqlsample/dbfunc
    6.2.5 Input the following :
    6.2.5.1 param0 value: 1
    6.2.5.2 param1 value: 1
    6.2.5.3 param2 value: 10
    6.2.6 Click the Invoke button
    6.2.7 A pop-up window will appear having the following contents :
    <?xml version="1.0" encoding="UTF-8" ?>
    - <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
    - <SOAP-ENV:Body>
    - <ns1:placeOrderResponse xmlns:ns1="http://db.func.place.order/dbfunc.wsdl" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
    <return xsi:type="xsd:string">Order placed with id of 1</return>
    </ns1:placeOrderResponse>
    </SOAP-ENV:Body>
    </SOAP-ENV:Envelope>
    6.2.8 Go back to SQLPLUS or Toad and execute "select * from orders" again
    6.2.8.1 There should be one row
    ORDER_ID, PRODUCT_ID, CUSTOMER_ID, QUANTITY
    1, 1, 1, 10
    NOTES AND REFERENCES
    =================================================================
    This detailed step-by-step guide was produced with the following article by Jason Price http://www.oracle.com/technology/pub/articles/price_10gws.html

    Success!!!
    I had to grant this permissions:
    call dbms_java.grant_permission( 'WS_TEST', 'SYS:java.lang.RuntimePermission', 'getClassLoader', '' );
    call dbms_java.grant_permission( 'WS_TEST', 'SYS:java.lang.RuntimePermission', 'accessClassInPackage.sun.util.calendar', '' );
    call dbms_java.grant_permission( 'WS_TEST', 'SYS:java.lang.RuntimePermission', 'setFactory', '' )
    call dbms_java.grant_permission( 'WS_TEST', 'SYS:java.util.PropertyPermission', 'HTTPClient.socket.idleTimeout', 'write' );
    call dbms_java.grant_permission( 'WS_TEST', 'SYS:java.net.SocketPermission', 'localhost', 'resolve' );
    call dbms_java.grant_permission( 'WS_TEST', 'SYS:java.net.SocketPermission', '127.0.0.1:8084', 'connect,resolve' );
    As I wrote earlier, WS_TEST is my user into which I load JAX-RPC client. Note that, if you load JAX-RPC client into user another than SYS, you have NOT to use -s -grant public option (wassam wrote about this too). Another thing is that I (finally) didn't load OC4J. To consume WebService I use utl_dbws.invoke(call_Handle CALL, request SYS.XMLTYPE) function.
    voytec001

  • Step by Step instructions importing Client Certificates on Java Engine

    Hi All,
    I am trying to configure a <b>Receiver</b> SOAP adapter with SSL, does anybody has step-by-step procedure on how to install the client certificates on Java Engine using Visual Administrator? and refer that keystore in SOAP adapter?
    PI 7.0 SP 09
    UNIX-Sun Soloris.
    Thanks,
    Laxman

    Hey Molugu,
    you shouldn't have to install the client certificates on KeyStorage Service, for receiver adapters. The server's public certificate is sent just in the SSL handshaking. What you should have is the certificate authorization tree in your Trusted ACs Service (if the issuer of your client's certificate is not already there).
    You need to install client certificates in sender adapters, when your client uses authentication through certificate. Then you need to install that authentication certificate for the authorized users.
    Check the following link for SSL on J2EE: http://help.sap.com/saphelp_nw2004s/helpdata/en/f1/2de3be0382df45a398d3f9fb86a36a/frameset.htm
    Regards,
    Henrique.

  • Step by step Data loading to BI 7.0 from SAP R/3 not from flat files

    Dear Guru's
    As i am new to BI 7.0, i need to extract the data from R/3 to BI. so could anyone help me in this regrds
    Thanks
    C.S.Ramesh

    if ur still not clear
    go thr this
    Hi,
    Check the following links.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
    check the following
    http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
    business content
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20co-pa%20extraction%203.0x
    https://websmp203.sap-ag.de/co
    http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
    (navigate with expand left nodes)
    also co-pa
    http://help.sap.com/saphelp_nw04/helpdata/en/53/c1143c26b8bc00e10000000a114084/frameset.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1910ab90-0201-0010-eea3-c4ac84080806
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ff61152b-0301-0010-849f-839fec3771f3
    LO Extraction
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
    Check these links:
    /people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
    /people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
    /people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
    /people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
    /people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
    Re: LO-Cockpit  V1 and V2 update
    Also Refer this link:
    http://www.sap-img.com/business/lo-cockpit-step-by-step.htm
    FI-CO 'Data Extraction -Line Item Level-FI-CO
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a
    FI-GL
    http://help.sap.com/saphelp_nw04/helpdata/en/c9/fe943b2bcbd11ee10000000a114084/frameset.htm
    http://help.sap.com/saphelp_470/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
    http://www.sapgenie.com/sapfunc/fi.htm
    FI-SL
    http://help.sap.com/saphelp_nw2004s/helpdata/en/28/5ccfbb45b01140a3b59298c267604f/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/41/65be27836d300ae10000000a114b54/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/ee/cd143c5db89b00e10000000a114084/frameset.htm
    How to do basic LO extraction for SAP-R3-BW
    1. Go to transaction code RSA3 and see if any data is available related to your DataSource. If data is there in RSA3 then go to transaction code LBWG (Delete Setup data) and delete the data by entering the application name.
    2. Go to transaction SBIW --> Settings for Application Specific Datasource --> Logistics --> Managing extract structures --> Initialization --> Filling the Setup table --> Application specific setup of statistical data --> perform setup (relevant application)
    3. In OLI*** (for example OLI7BW for Statistical setup for old documents : Orders) give the name of the run and execute. Now all the available records from R/3 will be loaded to setup tables.
    4. Go to transaction RSA3 and check the data.
    5. Go to transaction LBWE and make sure the update mode for the corresponding DataSource is serialized V3 update.
    6. Go to BW system and create infopackage and under the update tab select the initialize delta process. And schedule the package. Now all the data available in the setup tables are now loaded into the data target.
    7.Now for the delta records go to LBWE in R/3 and change the update mode for the corresponding DataSource to Direct/Queue delta. By doing this record will bypass SM13 and directly go to RSA7. Go to transaction code RSA7 there you can see green light # Once the new records are added immediately you can see the record in RSA7.
    8.Go to BW system and create a new infopackage for delta loads. Double click on new infopackage. Under update tab you can see the delta update radio button.
    9.Now you can go to your data target and see the delta record.
    find your scenario and find what data sources do you need on R3 side and ensure they are active as well:
    http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
    find your scenario -> data sources -> go to R3 -> sbiw and activate required data source
    replicate data sources in BW:
    RSA1 -> source systems -> right click on your source system -> replicate
    then activate your BC:
    service.sap.com/bi -> BI Business Content -> General Information -> SAP BW Business Content - Activation
    and execute infopackage (it should be delivered with BC)
    Useful links:
    http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
    Pls chk this cookbook for step by step;
    http://www.erpgenie.com/sapgenie/docs/MySAP%20BW%20Cookbook%20Vol%201.pdf
    http://www.erpgenie.com/sapgenie/docs/MySAP%20BW%20Cookbook%20Vol%202.pdf
    Step by step Generic extraction:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf
    How To doc link
    https://www.sdn.sap.com/irj/sdn/howtoguides
    Hope this helps

  • How To Configure Or Intialize Portal Installed With BI7.0 -  Step By Step

    Hello Gurus
    How do I configure or start working on portals which is installed as part of BI 7.0 installation that is  EP and EP Core(Includes BI-JAVA and ABAP Stacks).
    Please help me out with possible guidance(if possible Step by Step procedure) how to set up the parameters and at which locations in BI.. I have kept couple of days exploring this site, but I couldnt fine one answer relating.
    More over the answers I could find was "To configure technical content, business content and bi admin cockpit,"  Any help or suggestion provided is grealy appreciated and points will be awarded accrodingly.
    Thanking you all gurus in advance,
    Regards,
    Parvez.

    Dear,
    Try these links:
    http://help.sap.com/bp_epv170/EP_US/BBLibrary/Documentation/N00_BB_Essential_Information_EN_US.doc
    http://help.sap.com/saphelp_nw04/helpdata/en/7f/5bfc3f8fc2c542e10000000a1550b0/content.htm
    https://websmp102.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TEP12&COLLECTION=43&LANGUAGE=EN
    http://sapport.blogspot.com/2008/03/business-intelligence-java-components.html
    /people/srinivas.gv/blog/2005/11/28/role-and-configuration-of-isolation-methods-in-sap-enterprise-portal
    /people/julia.kielbasiewicz/blog/2005/04/17/integration-of-sap-business-warehouse-and-enterprise-portal-150-single-sign-on
    http://help.sap.com/saphelp_nw04/helpdata/en/0f/163c405865e801e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/32/98e6418b7eca17e10000000a155106/frameset.htm
    /thread/189547 [original link is broken]
    note: You can as well search in this forum.Im sure there are lots!
    Thanks.

  • MDM Data Manager step-by-step process with an example

    Hi All,
    I recently started reading MDM. I am clear with MDM-Console concepts. But I have problem with MDM Data Manager. I am confused with data entries in qualified tables, work flows(using microsoft studio), Matching mode- rules(High treshold, low threshold) etc.. I read material posted in forums- but still I am not clear.
    I need a step-by-step process for data entries with *examples*. A good example which covers all Data Manager concepts. PDF's with screen shots, videos any thing would help.
    Please help me......It would be of great help.
    Thanks in Advance.
    Suchir

    Hi Suchir ,
    MDM 5.5 has 4 MDM clients to perform 4 main functionality on the MDM master records.
    - Console- This is where all the Administrative work is performed
    - Data Manager- This is where the actual maintainence work is done on the master data like consolidation deduplication etc.
    - Import manager- Thsi is from where the source matser records are taken into MDM repoistory
    - Syndicator- This is from where teh consolidated master data is send back to the target systems.
    MDM Data Manager is the heart of MDM
    The activities that can be performed in the MDM Data manager are:
    - Data Consolidation
    - Data Validation
    - Data Deduplication
    - Data Assignment
    - Data Governanace
    etc......
    Qualified Table:
    - Qulaified tables are used to store relational records where one field value is determining the other field or fields value.
    - Qualified tables are maintained in Console and can be viewed in Data Manager
    - Qualified Table are viewed under a separate section in Data Manager in the right hand side.
    - Qualified table has Non qualifiers and Qualifiers.
    - Non qualifiers can be seen in the  Qualified table and in the linking Qualified field
    - Qualifiers can be seen separately under the Qualified section in the data manager
    Kindly refer the below link to know more on this:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00a15239-684e-2b10-b8ae-b936b7d1c1fe
    Workflows
    - Workflows are designed in MDM for Governanace
    - You can create the MDM workflow using the MS Visio 2003 stencils in the MDM Data manager in the record mode under the workflow table
    - The saved workflow in DM can then be executed either mnaully or automatically based on teh trigger actions
    - The trigger action for teh MDM wf are record Add,Update,Import,Manual
    Kindly refer the below link to know more on this:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60559952-ff62-2910-49a5-b4fb8e94f167  (MDM Workflows Overview)
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90990743-91c0-2a10-fd8f-fad371c7ee40  (Demo of MDM Workflows)
    Matching Mode
    - This mode is exclusively for Master data deduplication
    - We need to create Rules,Strategies,Transformation in MDM data manager in teh record mode
    - Then you need to run these strategies on the selected records
    - Based on your score and threshold set in the strategy MDM will identify duplicate records
    - This score will be seen in teh Matching mode
    - Colour coding is used along with scores to find out dupliactes
    - Green - 100%dupliacte Blue- 50?% Red- No duplicate
    Kindly refer the below link to know more on this:
    /people/michael.reil/blog/2006/05/18/mdm-matching-strategies-for-master-data-consolidation (matching merging in mdm)
    Hope It Helped
    Thanks & Regards
    Simona Pinto

  • Step By Step To Import Excel Spreadsheet Into SQL Server & Save Package

    Can someone provide a link or detail how to do this for me?  There are several options some of which I have no clue what do that I would like to understand so thought I would ask someone with more experience for a step by step.  Dumb it down
    for a dumby.

    SSIS is certianly one option, but you don't NEED to use SSIS for this.  please see these links.
    http://www.excel-sql-server.com/excel-sql-server-import-export-using-vba.htm#Introduction
    https://www.simple-talk.com/sql/database-administration/getting-data-between-excel-and-sql-server-using-odbc--/
    There are many options available to you as well.  Let me know if you need some more ideas of how to do what you are proposing to do.
    Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

  • How do you Configure Coldfusion MX7 Developer Version Step by Step to an Apache Server?

    Please provide exact steps as to how to Configure Coldfusion
    MX7 Developer Version Step by Step to an Apache Server Step by
    Step. I would be using the latest Apache Server download, which
    would be: apache_2.2.4-win32-x86-no_ssl.msi Please provide this
    answer ASAP.... Please also provide info on what folders to point
    the system to when configuring; in the version I provided it is
    rather hard to figure out what folders to use. Right now the way I
    did it does not work and I cannot see the administration page when
    the Apache Server is Running. Should the Apache Server be Running
    while installing? Also I noticed after the first install of Cold
    Fusion there is another step for full configuration where you have
    to go to the local host page for further configuration. What do you
    have to do there? I couldn't even get to that page because I
    couldn't access the admin page after I did the installation. Any
    help would be very welcome. Thanks in advance.

    This looks promising:
    http://www.sitepoint.com/article/install-coldfusion-mx-windows
    Ken Ford
    Adobe Community Expert
    Fordwebs, LLC
    http://www.fordwebs.com
    "spinaweb" <[email protected]> wrote in
    message
    news:eorrk3$m1g$[email protected]..
    > Please provide exact steps as to how to Configure
    Coldfusion MX7 Developer
    > Version Step by Step to an Apache Server Step by Step. I
    would be using
    > the
    > latest Apache Server download, which would be:
    > apache_2.2.4-win32-x86-no_ssl.msi Please provide this
    answer ASAP....
    > Please
    > also provide info on what folders to point the system to
    when configuring;
    > in
    > the version I provided it is rather hard to figure out
    what folders to
    > use.
    > Right now the way I did it does not work and I cannot
    see the
    > administration
    > page when the Apache Server is Running. Should the
    Apache Server be
    > Running
    > while installing? Also I noticed after the first install
    of Cold Fusion
    > there
    > is another step for full configuration where you have to
    go to the local
    > host
    > page for further configuration. What do you have to do
    there? I couldn't
    > even
    > get to that page because I couldn't access the admin
    page after I did the
    > installation. Any help would be very welcome. Thanks in
    advance.
    >
    >

  • Help - Step by Step Material on How to load Data from flatfile to BI 7.0

    Hi BI Experts,
    Can any one send the document or a pdf file on how to load data from flat file to BI 7.0 in step by step process.
    Thanks in Advance
    Regards
    Ramakrishna Kamurthy
    +91-9963101073

    1.     On log on you will be placed in the SAP Easy Access Strategic Management/ Business Analytics
    1.     You see the screen divided in two segments.
    2.     Follow the left segment.
    3.     Click on the Business Information Warehouse.
    4.     Sub Menu &#61664; BW Administration.
    5.     You find various entries in it.
    6.     Now double click on UG_BW_RSA1-Administrator Workbench
    2.     Creation of Info Area
    1.     Click on InfoObjects.
    2.     Now in the right hand side screen select the InfoObjects (First item on the top). Right click the mouse and select Create InfoArea.
    3.     A dialog box pops up.
    4.     Give the InfoArea as ZIVY_Iarea.
    5.     Give the Long Description as ZIVY Info Area.
    3.     Create a Catalog:
    1.     Select the InfoArea just created “ZIVY_Iarea”.
    2.     Right click the mouse pointer and select the option “Create InfoObject Catalog” 
    3.     A dialog box pops up.
    4.     Give the InfoObjCat = ZIVY_CHCAT
                                                                  i.      Description = “ZIVY Character Catalog”
                                                                 ii.      InfoObjectType: Check the Character. ( As we are creating the master data, check the Character)
                                                                iii.      Now at the bottom of this dialog box you see an icon called “CREATE”. Click this icon.
    1.      
    1.     The next screen in front of you is the “Edit InfoObject Catalog”.
    2.     Simply click the “activate” icon present on the Application Toolbar.
    2.     Create InfoObject :
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     Right click your mouse pointer, and select Create InfoObject.
    6.     A dialog box pops up.
    7.     Give the Character &#61664;ZIVY_CUST and
                                                                   i.      Description&#61664; Customer Info Object
                                                                 ii.      Click the TICK mark.
    1.      
    1.     The next screen you see is “Change Characteristic ZIVY_CUST: Detail”.
    2.     In this screen the following fields have to be modified:
                                                                   i.      In the General Tab
    1.      DataType: CHAR
    2.      Length: 10
                                                                 ii.      In the Master Data/ Texts Tab:
    1.      Check the “With Master Data” and “With Texts”.
    2.      Use suitable formats in the fields.
                                                                iii.      In the Hierarchy Tab:
    1.      Uncheck the “With Hierarchies”.
                                                               iv.      In the Attributes Tab:
    1.      We need to create the Attribute InfoObjects. These could be done directly from here or even from the RSA1 &#61664; InfoObject &#61664; ZIVY_Iarea&#61664;ZIVY_CHCAT. This will be delt in the forth coming steps (STEP  .
    1.      
    1.     Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
    2.     Activate the ZIVY_CUST, by clicking the icon “ACTIVATE”
    2.     Creation of InfoObject: ZIVY_CITY
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     Right click your mouse pointer, and select Create InfoObject.
    6.     A dialog box pops up.
    7.     Give the Character &#61664;ZIVY_CITY and
                                                                   i.     
    Description&#61664;
    Customer
    City Name.
                                                                 ii.      Click the TICK mark.
    1.      
    1.     The next screen you see is “Change Characteristic ZIVY_CITY: Detail”.
    2.     In this screen the following fields have to be modified:
                                                                   i.      In the General Tab
    1.      DataType: CHAR
    2.      Length: 25
                                                                 ii.      In the Master Data/ Texts Tab:
    1.      Uncheck the “With Master Data” and “With Texts”.
                                                                iii.      In the Hierarchy Tab:
    1.      Uncheck the “With Hierarchies”.
    1.      
    1.     Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
    2.     Activate the InfoObject ZIVY_CITY, by clicking the icon ACTIVATE.
    2.     Creation of InfoObject: ZIVY_STATE
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     Right click your mouse pointer, and select Create InfoObject.
    6.     A dialog box pops up.
    7.     Give the Character &#61664;ZIVY_STATE and
                                                                   i.     
    Description&#61664;
    Customer
    State Name.
                                                                 ii.      Click the TICK mark.
    1.      
    1.     The next screen you see is “Change Characteristic ZIVY_STATE: Detail”.
    2.     In this screen the following fields have to be modified:
                                                                   i.      In the General Tab
    1.      DataType: CHAR
    2.      Length: 25
                                                                 ii.      In the Master Data/ Texts Tab:
    1.      Uncheck the “With Master Data” and “With Texts”.
                                                                iii.      In the Hierarchy Tab:
    1.      Uncheck the “With Hierarchies”.
    1.      
    1.     Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
    2.     Activate the InfoObject ZIVY_STATE, by clicking the icon ACTIVATE.
    2.     Creation of InfoObject: ZIVY_CTRY
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     Right click your mouse pointer, and select Create InfoObject.
    6.     A dialog box pops up.
    7.     Give the Character &#61664;ZIVY_CTRY and
                                                                   i.      Description&#61664; Customer Country Name.
                                                                 ii.      Click the TICK mark.
    1.      
    1.     The next screen you see is “Change Characteristic ZIVY_CTRY: Detail”.
    2.     In this screen the following fields have to be modified:
                                                                   i.      In the General Tab
    1.      DataType: CHAR
    2.      Length: 10
                                                                 ii.      In the Master Data/ Texts Tab:
    1.      Uncheck the “With Master Data”
    2.      Check the “With Texts” and make suitable Text Table Properties.
                                                                iii.      In the Hierarchy Tab:
    1.      Uncheck the “With Hierarchies”.
    1.      
    1.     Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
    2.     Activate the InfoObject ZIVY_CTRY, by clicking the icon ACTIVATE.
    1.     Creation of  Attributes and InfoObject from the ZIVY_CUST InfoObject:
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     In this ZIVY_CHCAT, you see the InfoObject ZIVY_CUST. Double click the InfoObject ZIVY_CUST.
    6.     You find the screen “Change Characteristic ZIVY_CUST:Detail”.
    7.     Click on the tab “Attributes”
    8.     In the Character Attribute Box, type ZIVY_CITY and enter the ENTER KEY.
    9.     You see the relevant information regarding this being inserted.
    10.     Similarly, type ZIVY_STATE, ZIVY_CTRY.
    11.     Now, we will create another InfoObject ZIVY_TEL, from here.
    12.     So type ZIVY_Tel and enter the ENTER KEY.
    13.     A dialog box pops up, and request you “If you want to Create an InfoObject”
    14.     Select “ Create Attribute As Characteristic” and click the check mark.
    15.     Another window pops up. Give the following:
                                                                   i.      In the General Tab:
    1.      Long Description: ZIVY Telephone Number
    2.      Short Description: ZIVY Telephone Number
    3.      DataType : NUMC
    4.      Length : 10
    5.      Uncheck Attribute Only
                                                                 ii.      In the Master Data/ Texts Tab:
    1.      Uncheck the “With Master Data” and “With Texts”.
                                                                iii.      In the Hierarchy Tab:
    1.      Uncheck the “With Hierarchies”
                                                               iv.      Now click the “TICK MARK”
    1.      
    1.     Click the “ACTIVATE”
    2.     A window pops up.
                                                                   i.      Select “activate dependent InfoObjects.
                                                                 ii.      Click the Check Mark.
    1.     Creation of InfoObject: ZIVY_DATE
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     Right click your mouse pointer, and select Create InfoObject.
    6.     A dialog box pops up.
    7.     Give the Character &#61664;ZIVY_DATE and
                                                                   i.      Description&#61664; ZIVY Date.
                                                                 ii.      Click the TICK mark.
    1.      
    1.     The next screen you see is “Change Characteristic ZIVY_DATE: Detail”.
    2.     In this screen the following fields have to be modified:
                                                                   i.      In the General Tab
    1.      DataType: DATS
    2.      Length: 8
                                                                 ii.      In the Hierarchy Tab:
    1.      Uncheck the “With Hierarchies”.
    1.      
    1.     Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
    2.     Activate the InfoObject ZIVY_CTRY, by clicking the icon ACTIVATE.
    2.     Create ZIVY Application Component:
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoSource in the left hand segment.
    3.     In the right hand segment, select InfoSources.
    4.     Right click the mouse pointer and select the entry “Create Application Component”
    5.     A window pops up.
                                                                   i.      Application Component: ZIVY_APPCOMP
                                                                 ii.      Long Description : ZIVY Application Component
                                                                iii.      Click the check mark.
    1.     Create InfoSoure:
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoSource in the left hand segment.
    3.     In the right hand segment, select InfoSources.
    4.     Select the application component you created “ZIVY_APPCOMP” alias “ZIVY Application Component”.
    5.     Right click the mouse pointer and select the entry “Create InfoSource”
    6.     A window pops up:
                                                                   i.      Select the “Direct Update of Master Data”
                                                                 ii.      InfoObject : ZIVY_CUST
                                                                iii.      Click the CHECK MARK.
    1.      
    1.     Now beneath “ZIVY Application Component” you see the “Customer Info Object”.
    2.     Select the “Customer Info Object” mentioned above.
    3.     Right click the mouse pointer, and select the entry “Assign DataSource”.
    4.     A window pops up.
                                                                   i.      InfoSource: ZIVY_CUST
                                                                 ii.      Source System: FLATFILE
                                                                iii.      Check the TICK MARK.
                                                               iv.      Just click yes for the coming window pop ups.
    1.      
    1.     Key thing
                                                                   i.      Click on the tab “Transfer Rules”
    1.      Have a look at the data mapping here.
    2.      First field is ZIVY_CUST,
    3.      Second field is ZIVY_CITY.
    4.      And so on.
    5.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.                                                            ii.      Click on the tab “DataSource/Transport Structure”1.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
    2.      If the order is different, just shuffle the rows.
                                                                iii.      Click the “Activate Button”. By clicking the “ACTIVATE BUTTON” you just activated the ZIVY_CUST MASTER DATA.
                                                               iv.      Now in DataSource : select the text.
                                                                 v.      Click on the tab “Transfer Rules”
    1.      Have a look at the data mapping here.
    2.      First Field : 0LANGUAGE
    3.      Second field is ZIVY_CUST,
    4.      Third field is 0TXTMD.
    5.      Click the Transfer Rule adjacent to “0LANGUAGE”
    6.      A window pops up.
    a.       Check the “CONSTANT” and give the value as “EN”
    b.      Click the TICK MARK.
    7.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. Ignore the first field, as it is a constant.                                                          vi.      Click on the tab “DataSource/Transport Structure”1.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
    2.      If the order is different, just shuffle the rows.
                                                              vii.      Click the “Activate Button”. By clicking the “ACTIVATE.
    1.     Create the DATA required for this MASTER DATA
    1.     Open EXCEL.
    2.     Type the following data:
    1.      
    1.     Save as “ZIVY_CUST_MASTER.CSV”
    2.     The file should be saved in COMMA SEPARATED FORMAT.
    3.     Open EXCEL
    4.     Type the following data:
    5.     Save the file *** “ZIVY_CUST_TEXT.CSV”
    1.     Create InfoPackage
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoSource in the left hand segment.
    3.     In the right hand segment, select InfoSources.
    4.     Select the application component you created “ZIVY_APPCOMP” alias “ZIVY Application Component”.
    5.     Beneath this, you see “ZIVY_CUST” alias “Customer Info Object”
    6.     Beneath this you see a “FLAT FILE”.
    7.     Select this “FLAT FILE”,  right click the mouse pointer and select the option “Create InfoPackage”.
    8.     A window pops up.
                                                                   i.      InfoPackage Description: Info package for “ZIVY_CUST_ATTR”.
                                                                 ii.      Select “ZIVY_CUST_ATTR”
                                                                iii.      Click the “CHECK MARK”
    1.      
    1.     You see a new screen “Scheduler (Maintain InfoPackage)”.
    2.     Click the tab “External Data”
                                                                   i.      Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_CUST_MASTER.csv
                                                                 ii.      Check the CSV file.
                                                                iii.      Click the Preview Button.
                                                               iv.      A window pops up, click the CHECK MARK.
                                                                 v.      You see the data present in the EXCEL File.
    1.      
    1.     Click the tab “Update”
                                                                   i.      Have a look at the entries.
    1.      
    1.     Click the tab: Scheduler:
                                                                   i.      Click the button “Start”
                                                                 ii.      You now click on “MONITOR BUTTON” present on the tool bar.
                                                                iii.      Browse the data.
    1.     Create InfoPackage
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoSource in the left hand segment.
    3.     In the right hand segment, select InfoSources.
    4.     Select the application component you created “ZIVY_APPCOMP” alias “ZIVY Application Component”.
    5.     Beneath this, you see “ZIVY_CUST” alias “Customer Info Object”
    6.     Beneath this you see a “FLAT FILE”.
    7.     Select this “FLAT FILE”,  right click the mouse pointer and select the option “Create InfoPackage”.
    8.     A window pops up.
                                                                   i.      InfoPackage Description: Info package for “ZIVY_CUST_TEXT”.
                                                                 ii.      Select “ZIVY_CUST_TEXT”
                                                                iii.      Click the “CHECK MARK”
    1.      
    1.     You see a new screen “Scheduler (Maintain InfoPackage)”.
    2.     Click the tab “External Data”
                                                                   i.      Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_CUST_TEXT.csv
                                                                 ii.      Check the CSV file.
                                                                iii.      Click the Preview Button.
                                                               iv.      A window pops up, click the CHECK MARK.
                                                                 v.      You see the data present in the EXCEL File.
    1.      
    1.     Click the tab “Update”
                                                                   i.      Have a look at the entries.
    1.      
    1.     Click the tab: Scheduler:
                                                                   i.      Click the button “Start”
                                                                 ii.      You now click on “MONITOR BUTTON” present on the tool bar.
                                                                iii.      Browse the data.         
    1.     Create InfoObject :
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     Right click your mouse pointer, and select Create InfoObject.
    6.     A dialog box pops up.
    7.     Give the Character &#61664;ZIVY_MAT and
                                                                   i.      Description&#61664; ZIVY Material Info Object
                                                                 ii.      Click the TICK mark.
    1.      
    1.     The next screen you see is “Change Characteristic ZIVY_MAT: Detail”.
    2.     In this screen the following fields have to be modified:
                                                                   i.      In the General Tab
    1.      DataType: CHAR
    2.      Length: 10
                                                                 ii.      In the Master Data/ Texts Tab:
    1.      Check the “With Master Data” and “With Texts”.
    2.      Use suitable formats in the fields.
                                                                iii.      In the Hierarchy Tab:
    1.      Uncheck the “With Hierarchies”.
                                                               iv.      In the Attributes Tab:
    1.      We need to create the Attribute InfoObjects. These could be done directly from here or even from the RSA1 &#61664; InfoObject &#61664; ZIVY_Iarea&#61664;ZIVY_CHCAT. This will be delt in the forth coming steps (STEP 17).
    1.      
    1.     Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
    2.     Activate the ZIVY_MAT, by clicking the icon “ACTIVATE”
    2.     Creation of InfoObject: ZIVY_GROUP
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     Right click your mouse pointer, and select Create InfoObject.
    6.     A dialog box pops up.
    7.     Give the Character &#61664;ZIVY_GROUP and
                                                                   i.      Description&#61664; ZIVY Material Group.
                                                                 ii.      Click the TICK mark.
    1.      
    1.     The next screen you see is “Change Characteristic ZIVY_GROUP: Detail”.
    2.     In this screen the following fields have to be modified:
                                                                   i.      In the General Tab
    1.      DataType: CHAR
    2.      Length: 10
                                                                 ii.      In the Master Data/ Texts Tab:
    1.      Uncheck the “With Master Data”
    2.      Check the “With Texts” and make suitable Text Table Properties.
                                                                iii.      In the Hierarchy Tab:
    1.      Uncheck the “With Hierarchies”.
    1.      
    1.     Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
    2.     Activate the InfoObject ZIVY_GROUP, by clicking the icon ACTIVATE.
    2.     Creation of InfoObject: ZIVY_COLOR
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     Right click your mouse pointer, and select Create InfoObject.
    6.     A dialog box pops up.
    7.     Give the Character &#61664;ZIVY_COLOR and
                                                                   i.      Description&#61664; ZIVY Material Color.
                                                                 ii.      Click the TICK mark.
    1.      
    1.     The next screen you see is “Change Characteristic ZIVY_COLOR: Detail”.
    2.     In this screen the following fields have to be modified:
                                                                   i.      In the General Tab
    1.      DataType: CHAR
    2.      Length: 10
                                                                 ii.      In the Master Data/ Texts Tab:
    1.      Uncheck the “With Master Data”  and  “With Texts”.
                                                                iii.      In the Hierarchy Tab:
    1.      Uncheck the “With Hierarchies”.
    1.      
    1.     Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
    2.     Activate the InfoObject ZIVY_COLOR, by clicking the icon ACTIVATE.
    2.     Creation of InfoObject from the ZIVY_MAT InfoObject:
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     In this ZIVY_CHCAT, you see the InfoObject ZIVY_MAT. Double click the InfoObject ZIVY_MAT.
    6.     You find the screen “Change Characteristic ZIVY_MAT:Detail”.
    7.     Click on the tab “Attributes”
    8.     In the Character Attribute Box, type ZIVY_GROUP and enter the ENTER KEY.
    9.     You see the relevant information regarding this being inserted.
    10.     Similarly, type ZIVY_COLOR.
    11.     Click the “ACTIVATE”
    3.     Create InfoSoure:
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoSource in the left hand segment.
    3.     In the right hand segment, select InfoSources.
    4.     Select the application component you created “ZIVY_APPCOMP” alias “ZIVY Application Component”.
    5.     Right click the mouse pointer and select the entry “Create InfoSource”
    6.     A window pops up:
                                                                   i.      Select the “Direct Update of Master Data”
                                                                 ii.      InfoObject : ZIVY_MAT
                                                                iii.      Click the CHECK MARK.
    1.      
    1.     Now beneath “ZIVY Application Component” you see the “ZIVY Material Info Object”.
    2.     Select the “ZIVY Material  Info Object” mentioned above.
    3.     Right click the mouse pointer, and select the entry “Assign DataSource”.
    4.     A window pops up.
                                                                   i.      InfoSource: ZIVY_MAT
                                                                 ii.      Source System: FLATFILE
                                                                iii.      Check the TICK MARK.
                                                               iv.      Just click yes for the coming window pop ups.
    1.      
    1.     Key thing
                                                                   i.      Click on the tab “Transfer Rules”
    1.      Have a look at the data mapping here.
    2.      First field is ZIVY_MAT,
    3.      Second field is ZIVY_GROUP.
    4.      Third field is ZIVY_COLOR.
    5.      Check the mapping. If you don’t see the mapping.
    6.      Click on the empty row in the group “Assign InfoObjectField”, the box to the right.
    7.      Type ZIVY_GROUP, ZIVY_COLOR.
    8.      Check the transfer rules.
    9.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.                                                            ii.      Click on the tab “DataSource/Transport Structure”1.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
    2.      If the order is different, just shuffle the rows.
                                                                iii.      Click the “Activate Button”. By clicking the “ACTIVATE BUTTON” you just activated the ZIVY_CUST MASTER DATA.
                                                               iv.      Now in DataSource : select the text.
                                                                 v.      Click on the tab “Transfer Rules”
    1.      Have a look at the data mapping here.
    2.      First Field : 0LANGUAGE
    3.      Second field is ZIVY_MAT,
    4.      Third field is 0TXTSH.
    5.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. Ignore the first field, as it is a constant.                                                          vi.      Click on the tab “DataSource/Transport Structure”1.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
    2.      If the order is different, just shuffle the rows.
                                                              vii.      Click the “Activate Button”. By clicking the “ACTIVATE.
    1.     Create the DATA required for this MASTER DATA
    1.     Open EXCEL.
    2.     Type the following data:
    1.      
    1.     Save as “ZIVY_Material_MASTER.CSV”
    2.     The file should be saved in COMMA SEPARATED FORMAT.
    3.     Open EXCEL
    4.     Type the following data:
    5.     Save the file *** “ZIVY_Material_TEXT.CSV”
    1.     Create InfoPackage
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoSource in the left hand segment.
    3.     In the right hand segment, select InfoSources.
    4.     Select the application component you created “ZIVY_APPCOMP” alias “ZIVY Application Component”.
    5.     Beneath this, you see “ZIVY_MAT” alias “ZIVY Material Info Object”
    6.     Beneath this you see a “FLAT FILE”.
    7.     Select this “FLAT FILE”,  right click the mouse pointer and select the option “Create InfoPackage”.
    8.     A window pops up.
                                                                   i.      InfoPackage Description: Info package for “ZIVY_MAT_ATTR”.
                                                                 ii.      Select “ZIVY_MAT_ATTR”
                                                                iii.      Click the “CHECK MARK”
    1.      
    1.     You see a new screen “Scheduler (Maintain InfoPackage)”.
    2.     Click the tab “External Data”
                                                                   i.      Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_Material_MASTER.csv
                                                                 ii.      Check the CSV file.
                                                                iii.      Click the Preview Button.
                                                               iv.      A window pops up, click the CHECK MARK.
                                                                 v.      You see the data present in the EXCEL File.
    1.      
    1.     Click the tab “Update”
                                                                   i.      Have a look at the entries.
    1.      
    1.     Click the tab: Scheduler:
                                                                   i.      Click the button “Start”
                                                                 ii.      You now click on “MONITOR BUTTON” present on the tool bar.
                                                                iii.      Browse the data.
    1.     Create InfoPackage
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoSource in the left hand segment.
    3.     In the right hand segment, select InfoSources.
    4.     Select the application component you created “ZIVY_APPCOMP” alias “ZIVY Application Component”.
    5.     Beneath this, you see “ZIVY_MAT” alias “ZIVY Material Info Object”
    6.     Beneath this you see a “FLAT FILE”.
    7.     Select this “FLAT FILE”,  right click the mouse pointer and select the option “Create InfoPackage”.
    8.     A window pops up.
                                                                   i.      InfoPackage Description: Info package for “ZIVY_MAT_TEXT”.
                                                                 ii.      Select “ZIVY_MAT_TEXT”
                                                                iii.      Click the “CHECK MARK”
    1.      
    1.     You see a new screen “Scheduler (Maintain InfoPackage)”.
    2.     Click the tab “External Data”
                                                                   i.      Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_MATERIAL_TEXT.csv
                                                                 ii.      Check the CSV file.
                                                                iii.      Click the Preview Button.
                                                               iv.      A window pops up, click the CHECK MARK.
                                                                 v.      You see the data present in the EXCEL File.
    1.      
    1.     Click the tab “Update”
                                                                   i.      Have a look at the entries.
    1.      
    1.     Click the tab: Scheduler:
                                                                   i.      Click the button “Start”
                                                                 ii.      You now click on “MONITOR BUTTON” present on the tool bar.
                                                                iii.      Browse the data.         
    1.     Create InfoObject :
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     Right click your mouse pointer, and select Create InfoObject.
    6.     A dialog box pops up.
    7.     Give the Character &#61664;ZIVY_SPER and
                                                                   i.      Description&#61664; ZIVY Sales Person Info Object
                                                                 ii.      Click the TICK mark.
    1.      
    1.     The next screen you see is “Change Characteristic ZIVY_SPER: Detail”.
    2.     In this screen the following fields have to be modified:
                                                                   i.      In the General Tab
    1.      DataType: CHAR
    2.      Length: 20
                                                                 ii.      In the Master Data/ Texts Tab:
    1.      Check the “With Master Data” and “With Texts”.
    2.      Use suitable formats in the fields.
                                                                iii.      In the Hierarchy Tab:
    1.      Uncheck the “With Hierarchies”.
                                                               iv.      In the Attributes Tab:
    1.      We need to create the Attribute InfoObjects. These could be done directly from here or even from the RSA1 &#61664; InfoObject &#61664; ZIVY_Iarea&#61664;ZIVY_CHCAT. This will be delt in the forth coming steps (STEP 24).
    1.      
    1.     Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
    2.     Activate the ZIVY_SPER, by clicking the icon “ACTIVATE”
    2.     Creation of InfoObject: ZIVY_SREG
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     Right click your mouse pointer, and select Create InfoObject.
    6.     A dialog box pops up.
    7.     Give the Character &#61664;ZIVY_SREG and
                                                                   i.      Description&#61664; ZIVY Sales Region.
                                                                 ii.      Click the TICK mark.
    1.      
    1.     The next screen you see is “Change Characteristic ZIVY_SREG: Detail”.
    2.     In this screen the following fields have to be modified:
                                                                   i.      In the General Tab
    1.      DataType: CHAR
    2.      Length: 20
                                                                 ii.      In the Master Data/ Texts Tab:
    1.      Check the “With Master Data”  and “With Texts”.
                                                                iii.      In the Hierarchy Tab:
    1.      Uncheck the “With Hierarchies”.
    1.      
    1.     Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
    2.     Activate the InfoObject ZIVY_SREG, by clicking the icon ACTIVATE.
    2.     Creation of Attributes from the ZIVY_SPER InfoObject:
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     In this ZIVY_CHCAT, you see the InfoObject ZIVY_SPER. Double click the InfoObject ZIVY_SPER.
    6.     You find the screen “Change Characteristic ZIVY_SPER:Detail”.
    7.     Click on the tab “Attributes”
    8.     In the Character Attribute Box, type ZIVY_SREG and enter the ENTER KEY.
    9.     You see the relevant information regarding this being inserted.
    10.     Click the “ACTIVATE”
    3.     Create InfoSoure:
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoSource in the left hand segment.
    3.     In the right hand segment, select InfoSources.
    4.     Select the application component you created “ZIVY_APPCOMP” alias “ZIVY Application Component”.
    5.     Right click the mouse pointer and select the entry “Create InfoSource”
    6.     A window pops up:
                                                                   i.      Select the “Direct Update of Master Data”
                                                                 ii.      InfoObject : ZIVY_SPER
                                                                iii.      Click the CHECK MARK.
    1.      
    1.     Now beneath “ZIVY Application Component” you see the “ZIVY Sales Person Info Object”.
    2.     Select the “ZIVY Sales Person  Info Object” mentioned above.
    3.     Right click the mouse pointer, and select the entry “Assign DataSource”.
    4.     A window pops up.
                                                                   i.      InfoSource: ZIVY_SREP
                                                                 ii.      Source System: FLATFILE
                                                                iii.      Check the TICK MARK.
                                                               iv.      Just click yes for the coming window pop ups.
    1.      
    1.     Key thing
                                                                   i.      Click on the tab “Transfer Rules”
    1.      Have a look at the data mapping here.
    2.      First field is ZIVY_SPER,
    3.      Second field is ZIVY_SREG.
    4.      Check the mapping. If you don’t see the mapping.
    5.      Click on the empty row in the group “Assign InfoObjectField”, the box to the right.
    6.      Check the transfer rules.
    7.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.                                                            ii.      Click on the tab “DataSource/Transport Structure”1.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
    2.      If the order is different, just shuffle the rows.
                                                                iii.      Click the “Activate Button”. By clicking the “ACTIVATE BUTTON” you just activated the ZIVY_SREP MASTER DATA.
                                                               iv.      Now in DataSource : select the text.
                                                                 v.      Click on the tab “Transfer Rules”
    1.      Have a look at the data mapping here.
    2.      First Field : 0LANGUAGE
    3.      Second field is ZIVY_SPER,
    4.      Third field is 0TXTSH.
    5.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. Ignore the first field, as it is a constant.                                                          vi.      Click on the tab “DataSource/Transport Structure”1.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
    2.      If the order is different, just shuffle the rows.
                                                              vii.      Click the “Activate Button”. By clicking the “ACTIVATE.
    1.     Create the DATA required for this MASTER DATA
    1.     Open EXCEL.
    2.     Type the following data:
    1.      
    1.     Save as “ZIVY_SREP_MASTER.CSV”
    2.     The file should be saved in COMMA SEPARATED FORMAT.
    3.     Open EXCEL
    4.     Type the following data:
    5.     Save the file *** “ZIVY_SREP_TEXT.CSV”
    1.     Create InfoPackage
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoSource in the left hand segment.
    3.     In the right hand segment, select InfoSources.
    4.     Select the application component you created “ZIVY_APPCOMP” alias “ZIVY Application Component”.
    5.     Beneath this, you see “ZIVY_SPER” alias “ZIVY Sales Person Info Object”
    6.     Beneath this you see a “FLAT FILE”.
    7.     Select this “FLAT FILE”,  right click the mouse pointer and select the option “Create InfoPackage”.
    8.     A window pops up.
                                                                   i.      InfoPackage Description: Info package for “ZIVY_SPER_ATTR”.
                                                                 ii.      Select “ZIVY_SPER_ATTR”
                                                                iii.      Click the “CHECK MARK”
    1.      
    1.     You see a new screen “Scheduler (Maintain InfoPackage)”.
    2.     Click the tab “External Data”
                                                                   i.      Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_SPER_MASTER.csv
                                                                 ii.      Check the CSV file.
                                                                iii.      Click the Preview Button.
                                                               iv.      A window pops up, click the CHECK MARK.
                                                                 v.      You see the data present in the EXCEL File.
    1.      
    1.     Click the tab “Update”
                                                                   i.      Have a look at the entries.
    1.      
    1.     Click the tab: Scheduler:
                                                                   i.      Click the button “Start”
                                                                 ii.      You now click on “MONITOR BUTTON” present on the tool bar.
                                                                iii.      Browse the data.
    1.     Create InfoPackage
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoSource in the left hand segment.
    3.     In the right hand segment, select InfoSources.
    4.     Select the application component you created “ZIVY_APPCOMP” alias “ZIVY Application Component”.
    5.     Beneath this, you see “ZIVY_SPER” alias “ZIVY Sales Person Info Object”
    6.     Beneath this you see a “FLAT FILE”.
    7.     Select this “FLAT FILE”,  right click the mouse pointer and select the option “Create InfoPackage”.
    8.     A window pops up.
                                                                   i.      InfoPackage Description: Info package for “ZIVY_SPER_TEXT”.
                                                                 ii.      Select “ZIVY_SPER_TEXT”
                                                                iii.      Click the “CHECK MARK”
    1.      
    1.     You see a new screen “Scheduler (Maintain InfoPackage)”.
    2.     Click the tab “External Data”
                                                                   i.      Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_SPER_TEXT.csv
                                                                 ii.      Check the CSV file.
                                                                iii.      Click the Preview Button.
                                                               iv.      A window pops up, click the CHECK MARK.
                                                                 v.      You see the data present in the EXCEL File.
    1.      
    1.     Click the tab “Update”
                                                                   i.      Have a look at the entries.
    1.      
    1.     Click the tab: Scheduler:
                                                                   i.      Click the button “Start”
                                                                 ii.      You now click on “MONITOR BUTTON” present on the tool bar.
                                                                iii.     
    Browse the data.         
    1.     Creation of InfoObject Catalog with Key Figures:
    1.     Select the InfoArea just created “ZIVY_Iarea”.
    2.     Right click the mouse pointer and select the option “Create InfoObject Catalog” 
    3.     A dialog box pops up.
    4.     Give the InfoObjCat = ZIVY_KEYCAT
                                                                  i.      Description = “ZIVY Key Figures Catalog”
                                                                 ii.      InfoObjectType: Check the Key Figures.
                                                                iii.       Now at the bottom of this dialog box you see an icon called “CREATE”. Click this icon.
    1.      
    1.     The next screen in front of you is the “Edit InfoObject Catalog”.
    2.     Simply click the “activate” icon present on the Application Toolbar.
    2.     Create InfoObject :
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_KEYCAT”,which is ZIVY  Key Figures Catalog.
    5.     Right click your mouse pointer, and select Create InfoObject.
    6.     A dialog box pops up.
    7.     Give the Character &#61664;ZIVY_AMT and
                                                                   i.      Description&#61664; ZIVY Amount Info Object
                                                                 ii.      Click the TICK mark.
    1.      
    1.     The next screen you see is “Create Key Figure ZIVY_AMT: Detail”.
    2.     In this screen the following fields have to be modified:
                                                                   i.      In the Type/ Unit Tab
    1.      DataType: Amount
    2.      Unit/ Currency = 0Currency
    1.      
    1.     Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
    2.     Activate the ZIVY_AMT, by clicking the icon “ACTIVATE”.
    2.     Create InfoObject :
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3. 

Maybe you are looking for

  • I want to show Vendor Number in CS11 report

    Dear Guru, Please help me to display vendor details in report CS11- BOM EXPLOSION LEVEL BY LEVEL. INPUT: 1) HEADER:2) PLANT:3) ALTERNATIVE:4) BOM APPLICATIN : BEST OUTPUT: VENDOR IS NOT DISPLAY THERE where is customization, settings for display vendo

  • Export freezes in the same spot

    I'm trying to export a video using Adobe CC. It's the same file I've exported a dozen times before, but for some reason the export-and my whole computer-freezes right at 40% every time. I'm exporting in H.264 at the HD 720P 23.976 frames per second p

  • Optimal Computer Workcenter Lab Enviornment for a Non-Profit

    We are setting up three 20 station computer work areas  for a non profit that does homeless services. These labs will be places for clients to come in throughout the day and get resumes done, do job searches etc. We have 20 new dell workstations / Wi

  • Error using RemoteLoginManager

    Hi all, I'm using the content services SDK to create a simple document, and followed all the steps in the Content Services developer guide, but I get the following error:~ AxisFault faultCode: {http://xml.apache.org/axis/}HTTP faultSubcode: faultStri

  • Where to buy the logic studio FULL VERSION

    does anyone know where to buy the LP8 FULL VERSION not the academic version? I heard there's only 50$ difference on the price, so i will probably go for the full version. i think apple store only sells the academic version.