BI Publisher 11.1.1.7.0 - RHEL 6.2 support?

Can anyone please advise whether this version of BI publisher can be installed on Red Hat Linux 6.2 (x86) operating system platform? The installation guide indicated RHEL 5.x support. Thank you.

This is our page:
http://www.oracle.com/technetwork/middleware/bi-publisher/downloads/index.html
and you can see there the certification:
www.oracle.com/technetwork/middleware/bi/bi-11gr1certmatrix-ps6-1928219.xls
Look for System tab.
Thanks
Eugen

Similar Messages

RHEL 5.7 support for BOE XI 3.1 SP3

Hi All,
The supported platform guide for BOE XI 3.1 SP3 says its supports RHEL 5.0
I would like to know does it also work with 5.7 version?
Thanks,
Swapnil Hoderkar

Hi,
The version 5.7 RHEL should support the BOE Xi 3.1 Sp3.
The patch need to be above RHBA-2007:0619-3
For more details check the link for Supported platform Guide : [BOE Xi sp3 Supported Platform Guide|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/3070682e-2a49-2d10-248b-c7428bcfb7f3]
Regards,
Rameez

Application deployment wizard- General Information-.Publisher and Software version fields - HOWTO build installation to support?

Hi all,
I have built an installer (using WIX) that gets deployed by SCCM Application Deployment.
The Publisher and Software version fields on the "General Information" page of "Create Application Wizard" do not get populated for the specified msi.
I looked in Orca at the Property table for the msi and the Manufactuer and ProductVersion values are filled in correctly.
Where is the SCCM "Create Application Wizard" looking for the "Publisher" and "Software version" values within the msi? It would be very useful to the SCCM Administrator if these values get filled in automatically by using
the values within the msi.
Thanks in advance!
Anthony LaMark

Hi,
If you could get the Manufactuer and ProductVersion values from Orca.
Use the following command creates a new application with the Manufactuer and ProductVersion.
PS C:\> New-CMApplication -Name "Contoso-test" -AutoInstall $True -Description "Contoso-test1" -Keyword "Contoso" -LinkText "Contoso-App" -LocalizedApplicationDescription "Contoso-test" -LocalizedApplicationName
"Contoso-test" -Manufacturer "Contoso-Mfg" -OptionalReference "Contoso-test4" -Owner "Contoso-testOwner" -ReleaseDate 2013/5/24
-SoftwareVersion "v3" -SupportContact "Contoso-supp" -UserDocumentation "Contoso-Help:"
For more information, please refer to the link below:
New-CMApplication
http://technet.microsoft.com/en-us/library/jj821860.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

RHEL 6 paravirtualisation support

Hi,
I've read somewhere that Red Hat has removed native XEN support from RHEL 6. Does this mean that a VM built with RHEL 6 running on OVM will perform badly (no paravirtualisation support?) compared to a RHEL 5 VM?
BTW I know that Oracle has just released EL 6 (basically RHEL 6 with all the Red Hat copywright messages removed).
Many Thanks.

Hi,
No, RHEL 6 guest will run as well as a RHEL 5.
What the "removed native Xen support" means is, that in a standard RHEL server (not guest!) install you will not find any XEN hypervisor functionality anymore. So the XEN hypervisor is gone (replaced by KVM), not any PVM/HVM functionality.
This even is improved with RHEL6, since the kernel itself will know what to do... use PVM or HVM. So no separate pvm kernel is needed.
Regards
Sebastian

OCFS / CRS / IA64 / RHEL 3 / 10g Support?

As I described in another thread, I have the following products and CRS does Not detect nor allow me to use the OCFS Filesystem when I try to input the device name/filesystem name, it errors and fails in the installer screen. The Support site for Oracle is Vague on this configuration officially. OCFS is UP and Running on four nodes. I actually installed Enterprise 10G on one system and defined the OCFS partition for my DB files. Worked fine. CRS seems to be my problem...
ocfs-2.4.21-EL-1.0.13-1.ia64
Oracle Cluster Ready Services Release 1 (10.1.0.3) for Linux Itanium
[root@sysl012 root]# uname -a
Linux sysl012 2.4.21-15.EL #1 SMP Thu Apr 22 00:13:07 EDT 2004 ia64 ia64 ia64 GNU/Linux
ANY official "support" for this?

Hi,
ORA-19816: WARNING: Files may exist in db_recovery_file_dest that are not known to database.This looks like an ASM-full condition, see here:
http://dba.ipbhost.com/index.php?showtopic=11393&mode=linear
ORA-19816: WARNING: Files may exist in string that are not known to database.
Cause: One of the following events caused this:
1. A database crash happened during file creation.
2. A backup control file was restored.
3. The control file was re-created.
4. DB_RECOVERY_FILE_DEST has previously been enabled and then disabled.
Action: Use RMAN command CATALOG RECOVERY AREA to re-catalog any such files. If the file header is corrupted, then delete those files using an OS utility. Do not use messages 19817; it is used for simulating lock failure Do not use messages 19818; it is used for space reclaimation before backup
Hope this helps. . .
Donald K. Burleson
Oracle Press author
Author of "Oracle Tuning: The Definitive Reference":
http://www.dba-oracle.com/bp/s_oracle_tuning_book.htm

Need to Upgrade to RHEL 5.5 on 10.2.0.4.0 DB RAC Servers

Hello,
We need to upgrade the RHEL 4.x OS to RHEL 5.5 on all of our 2-node 10.2.0.4.0 RAC DB servers. I realize that RHEL doesn't support upgrades from MAJOR versions like this in terms that only DB re-linking activities need to be done. As a result, we cannot retain our previous system settings or services. So, we will have simply re-install our CRS and RAC DB binaries (after we back up the pre-existing DB files). Here are my 3 questions which are largely for clarification:
1.) Does this forum agree with this assessment?
2.) Is it possible to do this as a rolling upgrade such that exisitng users can use the 1st node while we rebuild the 2nd node - and then switch them over to the 2nd node and we rebuild the remaining 1st node?'
3.) Does any one have a link or document ID that they might point me to to aid in doing this? Otherwise, I will do what seems the most obvious, back the OS and DB files (mayeb do an RMAN backup as well), let the Sys Admins blow the existing OS away (node by node - see prev question for rolling upgrade question), re-install CRS and RAC and then move the data files in question back to start up the DB.
Thank you.
Matt

The term rolling upgrade refers to upgrading different databases or different instances of the same database in a RAC environment, one at a time, without stopping the database. Oracle supports the rolling upgrade of Oracle RAC (not OS like I wrote previously) in a cluster when both versions of the operating system are certified with the version of the Oracle Database you are running. Rolling patch upgrades are not available if the Oracle Database software is shared across the different nodes. This is the case where the Oracle home is on Cluster File System (CFS) or on shared NFS volumes. The feature is only available where each node has its own copy of the Oracle Database software.
I doubt that Redhat or Oracle Linux will support in-place upgrades from version 4 to 5. Your only option really available might be to split the RAC cluster and completely setup each node from scratch, than rebuild the cluster. There could be of few changes between EL 4 and 5 that may affect your ability to run a mixed cluster, i.e. raw device support. Sorry, I'm afraid I cannot give you any other practical advise. Perhaps you might want to check the RAC forum at RAC, ASM & Clusterware Installation
To answer you question about the difference with Oracle Linux. The same versions of Oracle Linux and Red Hat Enterprise are binary compatible. For Oracle Linux 5.5, x86_64, you have an option to install the Unbreakable Enterprise Kernel (UEK), which contains a newer and Oracle optimized version of the kernel, currently 2.6.32. Oracle Linux provides a free public yum repository for software management and other Oracle specific packages. For access to patches you need a subscription to the Unbreakable Linux Network (ULN).
http://www.oracle.com/us/technologies/linux/index.html
http://www.oracle.com/us/corporate/pricing/els-pricelist-070592.pdf
https://www.redhat.com/apps/store/server/
Edited by: MaC on Dec 20, 2010 7:20 PM

Tibetan Language publishing problem

Hi,
I meet a problem.
I'm in China. We created some E-learning modules using PowerPoint, initially in simplified Chinese language. We published them either locally (to the local computer) or to the Connect Pro server, the final published document displayed without problems.
Now, the original PPT module files had been translated to Tibetan language (see the 1st picture in the below).
I try to publish those Tibetan modules to my own computer recently. However, after the publishing process, the index.htm (the window that should display) did not show the contents as I expected. I just see the Adobe Presenter icon on that page, seems it is trying to display, but in the initial loading process endlessly (see the 2nd picture in the below).
I tried several modules, only the first one of them works but others go to the problem I mentioned above.
I used Presenter 8 to publish the PPT files.
I Emailed a previous colleague of me, who is a very clever Yankee. He replied the font (Tibetan) may not be supported by presenter. But I'm bewildered - why I published the 1st Tibetan language module, and successfully see the results? Did I just accidentally succeed?
Here is the last message he sent to me:
Yes, the font might only present a problem for certain characters, I think presenter 7 would probably be worse in this regard (but who knows?), I don't have PowerPoint or presenter on my computer and so can't actively diagnose, sorry =( I'm sure you can get a handle on it though - try looking at your browser's JavaScript console when it tries to load, it might give you some hints!
By default, when I chose "view output after publishing", Internet Explorer would be used as the showing screen. And I may not have the intention to change into another browser. He mentions the JavaScript setting of the browser, I'm still not sure what he pointed to.
Can anyone tell me how to display published Tibetan PowerPoints? Or, Tibetan language is not supported by Presenter indeed?
Thank you

I tried to delete some slides and publish the PPT, I find the cause is focused on some slides from 11-14. (I've tried to delete some slides from the beginning, the publishing results were all fail)
In the process of deleting some slides from the PPT, voice files may be deleted automatically by the Presenter itself, but I don't think it was the voice file that created this problem.
Delete and publish            Publishing results
s11                                        Fail
s11, s12                                 Fail
s11, s12, s13                          Fail
s11, s12, s13, s14                 Success
s14                                        Fail
S13, s14                                Fail
s12, s13, s14                         Fail
s11, s13, s14                        Success
s11, s13                                Fail
s11, s14                                Fail
There are 15 slides of this module in total. I have included the pictures of s11, s13, s14 here.
Would you like to diagnose this issue, if I send this module presentation to you via Email? Could you leave an Email address or message your Email address to me?
And, after I identified those slides that may causing this problem, I found them (s11, s13, s14 see the list above) maybe not necessary for local publication, since we do not intend to publish those modules to a Connect server and collect answering statistics. So the option for us is to delete those three slides and do the local publication.
But if you have interest, I would send you the presentation file, and you can take a look.
s11:
S13:
S14:

Placeholder not visible in custom page layout - publishing site

Hi,
I have a custom page layout in publishing site.
I had added a new textbox to the existing page layout as below:
<tr id="trCustomContent2">
<td id="tdCustomContent" style="padding-top:5px;">
<div id="divCustomContent" style="padding-left:6px !important;vertical-align:top; width:450px;" >
<h3>
<PageFieldTextField:TextField ID="TextField1" FieldName="fec9f0d3-77a3-4afc-99d3-99d2cb745d2c" runat="server" >
</PageFieldTextField:TextField></h3>
</div>
</td>
</tr>
I deployed the changes, but in the edit mode of the page, i am not able to see the page layout.
This issue is happening when a subsite is created. For the existing sites, the textbox is getting shown.
How to fix this?
Thanks

Hi Venkatzeus,
For each page layout, it has associated with a content type.
You can click into the content type in site content types under Web Designer Galleries in root site settings.
And then click Add from new site column to create and add the new site column to this content type.
After that you can add this column to the page layout(.aspx page for the page layout) with the code below(you need to change the fieldname value to the corresponding GUID of the column):
<div>
<Publishing:EditModePanel runat="server" CssClass="edit-mode-panel">
<PageFieldTextField:TextField ID="TextField1" FieldName="6bf50814-27d1-4b36-9980-c702c25080d7" runat="server">
</PageFieldTextField:TextField>
</Publishing:EditModePanel>
</div>
Best regards.
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Click Boxes in published PDFs

I have a click box that opens a linked PDF (not a url but an actual file) in my Captivate program. When I publish the Captivate program the SWF and HTML5 versions of the program will open the linked PDF file when I click on the click box. However, when I publish a PDF version of the Captivate program, the PDF version will not open the linked PDF file. I have put the PDF in the publish folder. Does the PDF version of not support the ability to use click boxes to open linked files?

Hi there
This is not a bug. Click Boxes are invisible by their very nature. They are invisible buttons.
Likely you feel into a trap of sorts. It seems you felt you would need to clear the visible option in order that your user would not see the Click Box.
In reality, clearing this option simply removes it from the slide during playback. Perhaps you are using Variables and Advanced Actions. Maybe you are making a game of sorts. You wish to allow clicking on a certain area, but having no action when the click occurs. UNTIL you click another area to make this one finally "clickable". You would accomplish this by using the Advanced Actions and Variables and turning visibility off and on. So when the user clicked another area, the action turned on visibility for the Click Box that was formerly hidden. And if the user clicked before and nothing happened, they click this time and see an action occur.
Make sense? I hope so. If no, perhaps I can toss together a small demo to show you.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Possible to retrieve an '09 blog published on iWeb/MobileMe?

Argh. I published my family's travel blog a few years back using MobileMe (web.me.com/shwang), and stupidly forgot about it during the MobileMe/iCloud transition. Is there any way to retrieve the blog's contents, with or without comments?

iWeb saves the assets of your website, webpages, blog posts and photoalbums in the domain.sites file on your computer.
It's here :
~/Library/Application Support/iWeb/
where ~ is your Home directory.
Only the comments were saved on the MMe server.
So you need the domain file to continue publishing on a new server. Comments are not supported on 3rd party webservers, so you could not see them anyway.
If you have no domain file and no backup, you'll have to start from scratch.

Publisher 2010 issue

When I try to open a particularly large file (a book I have written with many, many pictures) I get the message that "Publisher cannot open the file." All other file of mine, of any size, will open. How do I work around this problem?

Hi,
You may get this error when the publication is damaged, to troubleshoot a a damaged publication in Publisher, you can refer to the kb below:
http://support.microsoft.com/kb/198256/en-us
Although it's written for earlier versions, it also applies to Publisher 2010.
Regards,
Melon Chen
TechNet Community Support

Site Template and webparts in Publishing Pages

Hi
I've created a couple of webparts in SPD and added these to the pages in the Pages Library (Publish). I then export the site as a template (switching publish off first) and create a new sites from the template. Unfortunately the weparts are missing from
the publish pages but are available in the new site Webparts Gallery. The Site Pages have the Webparts available but the Publishing pages dont. When I exported the SC root web I switched off publishing for the site.
Why aren’t the weparts appearing on the page created in Pages Library. Ive switched on publishing now in the new site but its made no difference. ?
I found this blog but it doesnt appear to provide a solution :http://blogs.technet.com/b/stefan_gossner/archive/2007/09/19/save-site-as-template-option-and-the-publishing-feature.aspx
Thanks

As I said, templates are not supported when you turn on publishing. That's why there is no "save site as template" link after you turn on Publishing in a Site Collection. I assume you are using one of the hacks to navigate directly
to the page that lets you save the site as a template, since the link isn't there. That will work for some sites, but clearly won't for yours. There is no workaround. Site Templates aren't supported in Publishing environments because they
aren't reliable. If you want Page layouts then you need publishing. If you use publishing then you can't use site templates.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Trouble publishing to business catalyst

Hi all.
Here´s my problem. I use Muse in 2 different locations (same account) and the site I created is perfectly updated and published from location 1 on business catalyst. Problem is, when I downloaded the muse file from CC into my second location computer, added info and tried to publish I keep getting this error message saying that an "unexpected error in Catalyst" has made it impossible to publish the site. Does anyone know what´s going on?
Thanks,

Hi guirodrigues109,
Are you able to open the site on Muse on different location? If yes, then when exactly are you getting this error? A screenshot of an error with the steps you took is appreciated.
Also make sure that you are logged in to Muse with the AdobeID that is merged with your BC site account where you are trying to publish.
OR simply come on chat for Muse support team to investigate this further on your behalf.
Kind Regards,

Publish SFTP with UAG

Hello
Is it possible and if so, can anyone provide direction for publishing an SFTP server with UAG?
I'm essentially looking for direct proxy with no UAG portal authentication.
Thank you!

UAG is a HTTP/HTTPS proxy. Even Microsoft pushed as VPN gateway for a while and TMG is underneath forwarding/publishing of anything else then HTTP/HTTPS is not supported, see also http://technet.microsoft.com/en-us/library/ee522953.aspx. So technically you
can access the TMG console and add rules to publish port 22 for SSH/SFTP but it is not supported from Microsoft.
Hope that helps,
Lutz

Creating Publishing Pages

In SP2010, the steps to create a page was Site Actions > More Options > Create > Page
Then we'd have the options to select a Page, Publishing Page, or Web Part Page.
I can't seem to figure out where this is in SP2013. I know I can go to Site Contents and select Pages > File > New Document. That gives me the option to create a new Page, Article Page, Welcome Page, or Error Page.
Where can I create the pages above like in 2010? The Publishing feature is enabled by the way.
thanks

Hi,
According to your post, my understanding is that you wanted to create Publishing Page.
You can create Pages from Site Actions (Settings) Menu in SharePoint 2013.
From the Settings menu (the gear icon), you’ll find an
Add a Page item：
More information:
The Proper Way to Create Publishing Pages in SharePoint 2013
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

BI Publisher 11.1.1.7.0 - RHEL 6.2 support?

Similar Messages

Maybe you are looking for