BI Publisher 11g. Plotting multiple lines in a line graph

Hi,
We have a requirment where we need to show multiple lines in a line graph. I have gone through the earlier posts for this topic but when I am following the same steps I am not able to resolve the problem.
I have 3 mterics: Month (which will be X-axis) , Size (Which will be on y-axis) and Name. I have names for 10 tables and i want to display 10 lines in my line graph.
In the chart generator, I am using Month in "Labels", Table name for "color" field" and size in the "values" section.
When I am trying this I am geting the following error in chart generator. It says " The data required 2 columns. The data has only 1 column." To trick the system, I also put a dummy column with static value of 1, but then also i am getting the same error, that it requires 2 columns.
the sample XML for the chart is like this:
<G_2>
<TABLE_SIZE_TRENDS>43.90832000000001</TABLE_SIZE_TRENDS>
<TABLE_NAME>Table1</TABLE_NAME>
<MONTH_NAME_TRENDS>April</MONTH_NAME_TRENDS>
</G_2>
- <G_2>
<TABLE_SIZE_TRENDS>69.62872</TABLE_SIZE_TRENDS>
<TABLE_NAME>Table2</TABLE_NAME>
<MONTH_NAME_TRENDS>April</MONTH_NAME_TRENDS>
</G_2>
It looks pretty straightforward but I am stuck in it for quite some time now.
All your guidance is greatly appreciated in this regard.
Regards,
Aakarsh

any help? still need help. thanks

Similar Messages

  • How do you plot multiple curves on the same graph when using a while loop?

    I am writing a program that will plot the IV Output chracterisitcs curves for a MOSFET transistor. I have two sweep variables Vg and Vd. For each Vg valve selected, Vd is swept from its start to stop voltage creating a graph for that Vg valve. Both of the sweeps are done using while loops. Ideally I would like to display all of the Vg plots on the same graph while having the ability to do real-time graphing. Can anyone help me figure this problem out? I have attached my program. Thanks!!
    Tammy
    Attachments:
    outputfin2.vi ‏165 KB

    Hi Tammy & Tica T,
    As far as I see it - this thread is a very bad version of already existing bad version......
    http://forums.ni.com/ni/board/message?board.id=170&message.id=127857
    I expected, that an Applications Engineer from NI knows something about  a Transistor and how an Output characteristic looks like !!  Take a look to a typical Transistor Datasheet ( e.g. n-channel MOSFET) - you will see, that there is no relation of ID vs Time like in your example ( values vs time )  but  IDrain vs VDrain at different VGate's ( no relation to Mr. Bill Gates ).
    Find attached a vi, that in general does what you need - drawing of  curves vs x-axis (XY-graph in use)  - in test_sweep.zip.  And that you geet an impression, how it might be done ...... dynamic Output characteristic of a Transistor with Standard Equipment of a Lab ( Scope + Generator + Power Supply ) find in addition a Frontpanel - picture. One of the interesting points here is - the self-heating effect; visible on ch3 of scope - 5µs Pulse is already a very long time...... This measurement was done in order to compare with our own Transistors......... 
    Hope this helps a little bit to understand, what we are talking about.
    Regards
    Werner
    Attachments:
    test_sweep.zip ‏358 KB
    dynamic Transistor char.png ‏65 KB

  • How can I plot multiple curves using the XY graph?

    Hai,
    I want to plot  XY graphs for 2 diffrent datas in a single XY graph , to compare both the graphs, how to do. i attached my file & vi
    thanks
    sasi  
    Attachments:
    vi3.zip ‏55 KB

    Okay...so if I descide on rewiring my layout and not saving the entire array, how big is the buffer? because I want to be able to see the whole graph and be able to zoom and return to full view during runtime (possible right now).
    Also, you mentioned I could plot the 2D data directly? without adding timestamps to each Y-value? Will it only buffer one timestamp instead of my solution right now that saves as many timestams as I have channels in an array? Maybe the best would be to keep my value-array and then just add timestamps to the last values and then pass it to the XYgraph? If the buffer can handle that many values that is.
    If I were to abandon buffering the entire array (would be real nice indeed, since it frees up a lot of memory), I then need something to call on excel to import my semicolon separated textfile at the end. (textfile logged separatly) Right now I just call a new sheet and insert my array values.
    (look at last 2 frames of VI)
    Attachments:
    Untitled 11.vi ‏273 KB

  • Problem printing Report with Image in BI Publisher 11g

    I am working with BI publisher *11g* but I have problem printing images. Everything works fine if I do not include any images however when I add a image I get following problems.
    When I tried printing PDF in output I get
    Type /Xobject
    subtype /Image
    Filter /DTDDecode .......
    When I tried printing HTML output I get
    Type /Xobject
    <html...
    ....>
    When I tried printing RTF I get
    { \fontb1 }
    { \f0 Arial;}
    { \f1 Times:}
    I think I am missing some BI publisher configuration. Can you help me in this regard.
    Thanks,
    Santosh
    Edited by: user4956795 on Jan 16, 2012 2:08 PM
    Edited by: user4956795 on Jan 16, 2012 2:18 PM

    Isn't there a way for you to do this via a Package/Procedure versus having multiple queries?
    Per the BI Publisher guide,
    Following are recommended guidelines for building data models:
    Reduce the number of data sets or queries in your data model as much as possible. In general, the fewer data sets and queries you have, the faster your data model will run. While multiquery data models are often easier to understand, single-query data models tend to execute more quickly. It is important to understand that in parent-child queries, for every parent, the child query is executed.
    You should only use multiquery data models in the following scenarios:
    To perform functions that the query type, such as a SQL query, does not support directly.
    To support complex views (for example, distributed queries or GROUP BY queries).
    To simulate a view when you do not have or want to use a view.
    Thanks,
    Bipuser

  • Oracle BI Publisher 11g - Known Data Model Limitations

    Hi
    I'm new to BI Publisher 11g. I'm attempting to find out what the known limitations of BI Publisher 11g are.
    In particular, I would like to know the maximum number of queries allowed per data model or if a report may be based on multiple data models.
    Scenario:_
    My organization requires an electronic reporting book (PDF document) effectively consisting of *40-50* data tables and graphs. Someone has sold the idea to IT and the business that BI Publisher as the tool that deliver this type of functionality. Having used the tool now for the last couple of days, it's starting to look it's not the case.
    How do i achieve my ultimate goal of combining disparate report output into 1 huge document?
    Do I develop each reporting section as a separate data model/report pairs outputting XML files and then combine all XML files into 1 target document?
    If anyone can please give me some advice on how to go about this, it would be greatly appreciated.
    Thanks
    Greg

    This is related to browser, try it in some other browser.or else check ur bi publisher settings and data source configurations. Mostly his wil happen if u changed some thing in blaf rich plus.css changes

  • BI PUBLISHER 11G : Automatic Filtering Doubt

    Hello.
    I have one pivot table with same data and one data table with other data from different dataset. Both dataset are joined.
    What i want to do is when i run the report the data from pivot table is showed and the data from data table is not showed until i click in one row in the pivot table.Actually the data from both tables are showed and i want by default only to show the pivor table data.
    Other problem is when i have one line in pivot table without matches in data table i recieve this error message : "Error Ocurred" .
    Someone have an ideia how to fix this 2 problem?
    I'am using the last version of Bi publisher 11g.
    Thanks in Advance.
    Paulo Duarte

    Raphael,
    From reading your problem description, it sounds like you are working with BI Publisher that you have installed as part of OBIEE.  Is that correct?
    I also think that you have built the charts in BI Publisher, not Answers and have set up the filters using BI Publisher, not Answers.  Is that correct?
    The screen shots both look to be from BI Publisher.
    Have you used Answers at all in constructing this report?
    If not then I think that the best place for your question to be answered is in the BI Publisher sub-space. We can move your question there if you would like.
    One final question, is OBIEE the data source for the report?
    Regards,
    Ian Bristow

  • Enabling permission in obiee bi publisher 11g

    Hello All,
    I've issue with obiee bi publisher 11g permission folder in task pane. It always disable even it enable in analytics bu disable
    in bi publisher. How can to enable this permission folder.
    Edited by: 933298 on Sep 28, 2012 12:18 AM

    Thanks so much for your help!
    I've used add_months against oracle databases without any problem
    Sadly this publisher sql editor is not taking the same functions as a regular sql + command line :(
    Do you have any other idea?
    Thanks!

  • Plotting multiple series on an SVG Chart

    Hi,
    I am trying to plot multiple series on an SVG Chart. The moment I add a second series, I get the following error:
    "SVG Chart error: ORA-20001: line_chart error: ORA-20001: get_data error: ORA-20001: Parse error: ORA-0093".
    The graph fails to plot multiple series even for the same queries. The query I use is something like the following:
    select null "link", substr(name,7) "Label",value "Value"
    from <table>
    where
    <conditions>
    and name in (<sub-query>)
    order by name desc
    I have previously used an SVG chart to plot multiple series and have never had such problems. Any help would be greatly appreciated.
    I tried deleting and recreating the chart - doesn't help.
    Thanks,
    Aswath

    If you want to order the data do it via an in-line view:
    SELECT *
    FROM (
    select null "link", substr(name,7) "Label",value "Value"
    from <table>
    where
    <conditions>
    and name in (<sub-query>)
    order by name desc
    )

  • Not able to view any report in BI Publisher 11g

    Hello All
    I have installed BI Publisher 11g in Intel Solaris 10. I started of from the scratch, created a Data Model, then created a Report. but now I am not able to view the report. Upon clicking the report name or Open it logs me out.
    I am logged in as user, weblogic the default user created while installation.
    Please help
    Ash

    Hi Rony,
    You may have created the report initially with Web Layout only - therefore there will no paper layout.
    To 'get' the paper layout back, select your Report module name from the Builder and then select Tools-->Report Wizard. Select 'Create both web and Paper Layout' and then go through the various wizard steps.
    Best of Luck.
    Regards,
    John

  • Parameter is not working in HTTP( XML FEED) dataset in bi publisher 11g

    Hi,
    I have used parameter in BI Publisher 10g for HTTP(XML Feed) dataset to have dynamic url which worked by using ${p_url} where p_url is the parameter.
    The same procedure when I use in BI Publisher 11g is not working.It does not consider the parameter ${p_url} and throws the following exception
    *oracle.xdo.dataengine.datasource.plugin.DataAccessException: java.lang.Exception: java.net.MalformedURLException: no protocol: ${p_url}*
    Has anyone faced this issue?
    Please let me know if am doing something incorrect here.
    Thanks &Regards,
    Balaji

    Thanks for your reply.
    In BI Publisher 10 g we are using it this way ${p_url}.
    p_url is the parameter which gives us the entire URL for the XML feed.
    e.g. p_url=http://rss.news.yahoo.com/rss/topstories
    The p_url takes the entire url.
    Please let me know if this can be done the same way in 11g.
    Thanks,
    Balaji

  • BI Publisher 11g Trial dont work fine , send ERROR

    Hi.
    I Install BI PUblisher 11G Trial in a new clean server with :
    + Windows 2008 R2 Foundation Spanish with SP 1
    + Download, Install BI Publisher 11g Trial
    + Execute Demo Report "Revenue Budget Actual and Detail "
    + In Inteactive mode work fine
    + In HTML send ERROR : "java.lang.ArrayIndexOutOfBoundsException: 0"
    + In PDF the pivot table don't display any value higer 1.000.000
    This is a bug ?,how correct this errors ?
    Thank you very much
    Carlos

    Hi Carlos,
    Are you still experiencing this problem?
    I do not see this on my installation on Windows7 64 bit running in English.
    I also set the BI Publisher UI language and Report Locale to Spanish and all three output types:
    Interactive, HTML and PDF render correctly.
    When you say that the pivot table doesn't show any values higher than 1.000.000 ... what does it show instead?
    How do the other sample reports look for you?
    Mike
    Edited by: mdonohue on Jun 5, 2012 4:45 PM

  • Can we have a multiple TAGS in single line.Pls let me know

    Hi Team,
    Can we have a multiple TAGS in single line.Ie 2 open tags and 2 close tags in XML..Pls let me know

    chk this xml file
    <ns0:Test1>  
    <Address><street>LinkinPark</street><city>Paris</city></Address>
    </ns0:Test1>
    But I am not sure whether u can have any value for parent node in 7.0 for like node Address... only child nodes can have value..
    It can be done in 7.1
    Regards,
    Syed

  • Useing Excel table genarate the report in bi publisher 11g

    Hi All,
    Can anyone share your ideas pls...
    Using Excel files we upload the data into data set excel but could't generate the reports in Bi-Publisher 11g...we are getting the error :"Null".
    We are using open office...is this could be a problem..?
    Rgds..DCB
    Edited by: DCB on Dec 30, 2010 5:30 AM

    check the below
    http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi//bip/advancedbip/advancedbip.htm#t3
    http://www.youtube.com/watch?v=NPbKRnSkDVM
    using rtf template
    http://bipconsulting.blogspot.com/2010/02/drill-down-to-detail-or-another-report.html

  • BAPI : Multiple assignment of a line ID error in BAPI_GOODSMVT_CREATE

    Hi All,
    I am using BAPI_GOODSMVT_CREATE  for upload using excel ...........
    but i find error when execute .... Multiple assignment of a line ID
    anyone know about this..........
    Thanks in advance
    Santosh

    which movement type you are using and wht is your movement indicator?

  • Does BI Publisher 11g Support Restful Web Services as Data Set

    Hi,
    Could you tell me if BI Publisher 11g supports the REST API or is SOAP based API required for web services defined as data sets.
    Thanks in advance,
    Jean

    There are External API's which only do JSON outputs. Can this be integrated into a Report? If not, Is there a Enhacement to Add RESTful returning JSON or XML for a Dataset?

Maybe you are looking for