CUOM 2.3 sends multiple notifications for Event StoppedGSUPerformancePolling with same time stamps

Hi Alll,
I have a CUOM Version 2.3 which shows mutiple notifications per Device for Event StoppedGSUPerformancePolling with same time stamps. The message below is generated from the default All_Events for all devices.
Does anyone have a solution for that.
Regards Michael
This message is generated 8 times with the same time stamp in all messages.
** This message is generated from Cisco Unified Operations Manager **
ALERT ID                = 00012OW
CREATION TIME           = Sat 30-Oct-2010 16:31:57 CEST
MODIFIED TIME           = Sat 30-Oct-2010 17:00:58 CEST
STATUS                  = Active
SEVERITY                = Critical
MANAGED OBJECT          = 183.201.141.193
MANAGED OBJECT TYPE     = VoiceGateway
ASSOCIATED EVENTS       =
    Cleared:183.201.141.193:Unresponsive
    Active:183.201.141.193:StoppedGsuPerformancePolling
CUSTOMER IDENTIFICATION = Voice Port
CUSTOMER REVISION       = Voice Port

if you get SNMP timeout on multiple devices then the fault usually lies in the path that the polling follows to get to these devices and back to the server.
The problem obviously lies in the part path they have in common.
It is not unusual to see the highest backbone loads during the night, due to backups being taken.
Make sure the most important inter-switch links have no errors.
I would rather fix this then turn off alerting.
Cheers,
Michel

Similar Messages

  • Dispatch center - Select multiple tasks for scheduling at the same time

    Hi!
    I need a consultation regarding Dispatch center. Is there a functionality to select multiple tasks for scheduling at the same time for one resource?
    Please, guys, this is urgent.
    Jan

    You can schedule a single task or multiple tasks automatically directly from the
    dispatch center. The scheduling criteria applied come from Advanced Scheduler.
    Make Sure, you have the advanced scheduler. With out Advanced Scheduler and by just using Advice, you can only assign one task at a time.
    HTH
    ps: for more information, refer Field Service User Guide, "Scheduling Tasks"

  • Submit Multiple Job Definitions/Job Chains with same Time window/Submit frame in mass

    Hi,
    We have a requirement to submit multiple Job Definition/Job Chains which are part of common Time Window/Submit frame/Queue....
    Ex. We have over 50+ different jobs/job chains which will runs Monday to Friday for every 2 hours on same Queue "XXX_Queue".  Instead of submitting each job/job chain manually, we would like to know if we could use any script that can achieve our requirement? since we have couple of other jobs which fall under same scenarios...
    We are on M33.104 version. Please let me know if any one has any scripts or alternate way of submitting multiple jobs/job chains in mass.
    Thanks in advance!
    Nidhi.

    Hi Nidhish,
    Here is some code to set some stuff on a job:
    //Get the partition, for global this is not necessary as global is default
    Partition part = jcsSession.getPartitionByName("GLOBAL");
    //Get the job definition
    JobDefinition jobdef=jcsSession.getJobDefinitionByName(part, "System_Info");
    //Get the submit frame
    SubmitFrame sf = jcsSession.getSubmitFrameByName(part, "SF_Every_Year");
    //Get the time window
    TimeWindow tw = jcsSession.getTimeWindowByName(part, "System_Week_WorkingHours");
    //Set the start time
    DateTimeZone dtz = new DateTimeZone(2015, 10, 18, 15, 0, 0, 0);
    //Get the Queue
    Queue SystemQ=jcsSession.getQueueByName(part, "System");
    //Create the Job
    Job infoJob=jobdef.prepare();
    //Attach queue to job
    infoJob.setQueue(SystemQ);
    //Attach submit frame, time window, start time
    infoJob.setSubmitFrame(sf);
    infoJob.setTimeWindow(tw);
    infoJob.setRequestedStartTime(dtz);
    //Print out the jobid of the job
    jcsOut.println(infoJob.getJobId());
    //Submit the job
    jcsSession.persist();
    Regards,
    HP

  • SharePoint 2013 - SPD Custom Workflow keeps sending multiple emails for a single Task

    I have a workflow triggering on List item created only. There are multiple stages in the work flow and in each stage a single task is assigned to a group of people. Currently group is only having one user i.e. my own test user with a valid email address.
    Workflow was running fine for first 5 runs but now it keeps sending multiple emails for each task multiple times and runs very slow. I have only single workflow in development server with 24GB RAM.
    Enabling the Workflow log in Event viewer does not show any error or warnings. The only clue I see is WorkFlowManager Database table "DebugTrace" having multiple entries showing that WF is trying to send same email multiple times with failed attempts,
    but in reality emails are being delivered as well.
    http://server/site/_vti_bin/client.svc/sp.utilities.utility.SendEmail Retry sending email in xx.xx.xx Status: HTTPRetrying
    http://server/site/_vti_bin/client.svc/sp.utilities.utility.SendEmail Retry sending email in xx.xx.xx  Status: HTTPFailed
    I could not get the exact phrase as I don't have direct access to development machine at work.
    Any help or guidance will be highly appreciated.

    Yes, I have on-premise SP site, and here is the actual log I see in DebugTraces table.
    Message              Level     Name    Category
    Attempt 1 of the HTTP request to 'http://site/collection/_vti_bin/client.svc/sp.utilities.utility.SendEmail' failed with response '<Exception.
    No Status Code>'.              2              HttpRequestFailed          Http
    Attempt 2 of the HTTP request to 'http://site/collection/_vti_bin/client.svc/sp.utilities.utility.SendEmail' will be made in 00:00:06.            
    2              HttpRequestRetrying     Http
    Attempt 2 of the HTTP request to 'http://site/collection/_vti_bin/client.svc/sp.utilities.utility.SendEmail' failed with response '<Exception.
    No Status Code>'.              2              HttpRequestFailed          Http
    Attempt 3 of the HTTP request to 'http://site/collection/_vti_bin/client.svc/sp.utilities.utility.SendEmail' will be made in 00:00:07.            
    2              HttpRequestRetrying     Http
    Attempt 3 of the HTTP request to 'http://site/collection/_vti_bin/client.svc/sp.utilities.utility.SendEmail' failed with response '<Exception.
    No Status Code>'.              2              HttpRequestFailed          Http
    Attempt 4 of the HTTP request to 'http://site/collection/_vti_bin/client.svc/sp.utilities.utility.SendEmail' will be made in 00:00:09.            
    2              HttpRequestRetrying     Http
    Attempt 4 of the HTTP request to 'http://site/collection/_vti_bin/client.svc/sp.utilities.utility.SendEmail' failed with response '<Exception.
    No Status Code>'.              2              HttpRequestFailed          Http
    Attempt 5 of the HTTP request to 'http://site/collection/_vti_bin/client.svc/sp.utilities.utility.SendEmail' will be made in 00:00:13.            
    2              HttpRequestRetrying     Http

  • Unity Connection 10 - EventID: 0xC0000007 (7) - After 5 unsuccessful attempts to send a notification for subscription

    hello,
    i am receiving this event on MX:
    this is showing ip address of my unity connection that is 172.20.101.22....
    what could be reason and cause of it?
    EventID: 0xC0000007 (7) - After 5 unsuccessful attempts to send a notification for subscription [EABtYngwMi5uaGljLmxvY2FsEAAAAIfIUmalt2VFie2S8ahJiKNZu5GtCIfRCA==] against endpoint [http://172.20.101.22:7080/NotificationService/services/NotificationService?id=33a00cf5-3f28-44e1-9d44-46b24da4bc2a&pid=14227], the subscription has been removed. Details: WebException: Unable to connect to the remote server Status: ConnectFailure at System.Net.HttpWebRequest.EndGetRequestStream(IAsyncResult asyncResult, TransportContext& context)
    at System.Net.HttpWebRequest.EndGetRequestStream(IAsyncResult asyncResult)
    at Microsoft.Exchange.Services.Core.NotificationServiceClient.CreateSendNotificationRequestAsync(IAsyncResult requestAsyncResult)

    Navigate to CUC Administration, set the following under SMTP Configuration > Server, and give it another shot.
    [V] Allow Connections From Untrusted IP Addresses
      [ ] Require Authentication From Untrusted IP Addresses
    -Mateusz

  • How to send multiple data for a single element

    Hi All,
    I have a requirement where I have to send multiple data for single element per single transaction. For example
    Id details
    1 abcd
    1 efgh
    1 def
    Now, when I am selecting this ID from database, I have to get all the details in a single xsd like
    <id>1</id>
    ---><details>abcd</details>
    <details>efgh</details>
    <details>def</details>
    Thanks

    Hi,
    The following XSLT...
    <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
    <xsl:template match="/">
    <xsl:variable name="root" select="/"/>
    <root>
    <xsl:for-each select="distinct-values(/root/entry/id)">
    <xsl:variable name="id" select="."/>
    <entry>
    <id><xsl:value-of select="$id"/></id>
    <xsl:for-each select="$root/root/entry[id = $id]">
    <details><xsl:value-of select="details"/></details>
    </xsl:for-each>
    </entry>
    </xsl:for-each>
    </root>
    </xsl:template>
    </xsl:stylesheet>Will work for a document like this...
    <root>
    <entry>
    <id>1</id>
    <details>detail1</details>
    </entry>
    <entry>
    <id>1</id>
    <details>detail2</details>
    </entry>
    <entry>
    <id>2</id>
    <details>detail3</details>
    </entry>
    </root>Hope this helps...
    Cheers,
    Vlad

  • Blackberry Travel keeps sending me notifications for travel not my own (2 or 3 a day or more).

    Blackberry Travel keeps sending me notifications for travel not my own (2 or 3 a day or more).

    Just noticed this the other day myself. I don't know when it actually occurred. Doesn't seem to be repeating. In my case on two different days with all day calendar entries for trips added by BlackBerry travel, and single air travel legs that appeared independent of the trip destinations. The information was not in BlackBerry Travel. It looked like BlackBerry travel burped out a few trip fragments from somewhere and put them in my calendar.
    If I could scroll continuously forward in agenda mode in calendar I would look for other bogus trip entries. For now I'm not going to bother.
    - Ira

  • How to stop ical from sending email notifications for updates on my share ical calendar

    Is it possible stop ical from sending email notifications for updates I make on my share ical calendar?
    Mac OSX 10.7.2
    Very annoying for the person I am sharing my calendar with to get an email every time I change something.
    I hope there is a way to stop the emails, but for the updates to still go on their calendar.
    Thanks

    Great idea Lofty! thanks. If the person you are sharing a calendar with is a Yahoo Mail user, you only need to set up one filter (under Options - Mail Options - Filters) and route to Spam folder or a special folder for that purpose.
    Add a filter with the following parameters:
    Sender contains:    "Your First and Last Name" as it appears in the emails they are receiving
    Subject contains:  "Your First Name"
    Email body contains: "iCloud"
    Don't need to match case on anything. 
    So far, only these unwanted emails are being routed to the folder I chose.
    Hope that helps until Apple gets it's act together

  • Can I set multiple events at the same time to repeat on iCal?

    I know I can do this by manually selecting each one of them and setting it to repeat.
    But it's a pain and it doesn't make sense not to be able to edit more than one event at the same time.
    When I want to set up my weekly schedule I do it for one week and I want to be able to select all the events in that week and set all of them to repeat weekly at once.

    There are editors that bring up the songs one at a time, so you can edit them in a row.  Winamp works that way.  iTunes does not.

  • For the past month, I've had an echo of my voice while I'm talking on my phone.  It's very annoying and sounds like multiple people are speaking at the same time and it's only me.  Anyone know what's wrong?

    For the past month, I've had an echo of my voice while I'm talking on my phone.  It's very annoying and sounds like multiple people are speaking at the same time and it's only me.  Anyone know what's wrong?

    For the past month, I've had an echo of my voice while I'm talking on my phone.  It's very annoying and sounds like multiple people are speaking at the same time and it's only me.  Anyone know what's wrong?

  • Headcount report when multiple position for an employee at particular time

    Hi
    I have to develop a headcount report which will show the employee count by each personal area. Now i can simply bring in headcount data from the R/3 by standard source system. My problem is that one employee can have multiple position at a time. In standard routine every record is assigned headcount by 1. Now problem is that there are multiple records for an employee as multiple position are assigned at the same time which will lead to wrong headcount.
    Thanks
    Kamal

    Hi Kamal,
    Can you write your report off of 0EMPLOYEE or did you change the key to include position?  Just include employee group and employment status to determine who your active employees are. 
    Brian

  • Are there any apps for having seperate volume controls for each app if multiple apps are playing at the same time?

    Are there any apps for having seperate volume controls for each app if multiple apps are playing at the same time?

    I don't think you can do that the volume is universal, but maybe turn down the volumes in the app settings?

  • Is there a way to open multiple childs of Accordian at a same time

    Hi,
    Is there a way to open multiple childs of Accordain at a same time.
    My requiremnets is something like this:--
    Thanks for any help on this in Advance.
    Regards
    Munira

    You can have multiple nodes open on a tree, so I guess you could open them all up on a button click.
    Another option that might be possible is to use individual Accordians for each section and then use the click function to close the others.

  • JVM 1.3.1_06 Solaris 8 (sparc) multiple jvm's crash at the same time

    Hi All,
    I had multiple jvms crash all at the same time today morning, i was wondering if anyone had any similar issues with 1.3.1_06:
    Only a few jvms left an hs_errpid.log: here is the one with the most info:
    An unexpected exception has been detected in native code outside the VM.
    Unexpected Signal : 10 occurred at PC=0xff02f8f8
    Function name=VerifyClassCodes
    Library=/www/gmgwh/weblogic/jdk/j2sdk1_3_1_06/jre/lib/sparc/libjava.so
    Current Java thread:
    at java.lang.Shutdown.halt(Native Method)
    at java.lang.Shutdown.exit(Shutdown.java:209)
    at java.lang.Terminator$1.handle(Terminator.java:33)
    at sun.misc.Signal$1.run(Signal.java:193)
    at java.lang.Thread.run(Thread.java:479)
    Dynamic libraries:
    0x10000 /www/gmgwh/weblogic/jdk/j2sdk1_3_1_06/jre/bin/../bin/sparc/native_threads/java
    0xff350000 /usr/lib/libthread.so.1
    0xff340000 /usr/lib/libdl.so.1
    0xff200000 /usr/lib/libc.so.1
    0xff330000 /usr/platform/SUNW,Ultra-Enterprise/lib/libc_psr.so.1
    0xfe400000 /www/gmgwh/weblogic/jdk/j2sdk1_3_1_06/jre/lib/sparc/hotspot/libjvm.so
    0xff2d0000 /usr/lib/libCrun.so.1
    0xff1e0000 /usr/lib/libsocket.so.1
    0xff100000 /usr/lib/libnsl.so.1
    0xff0d0000 /usr/lib/libm.so.1
    0xff1c0000 /usr/lib/libmp.so.2
    0xff090000 /www/gmgwh/weblogic/jdk/j2sdk1_3_1_06/jre/lib/sparc/native_threads/libhpi.so
    0xff060000 /www/gmgwh/weblogic/jdk/j2sdk1_3_1_06/jre/lib/sparc/libverify.so
    0xff020000 /www/gmgwh/weblogic/jdk/j2sdk1_3_1_06/jre/lib/sparc/libjava.so
    0xfe7d0000 /www/gmgwh/weblogic/jdk/j2sdk1_3_1_06/jre/lib/sparc/libzip.so
    0xfe3e0000 /usr/lib/locale/en_US.ISO8859-1/en_US.ISO8859-1.so.2
    0xfe390000 /www/gmgwh/weblogic/jdk/j2sdk1_3_1_06/jre/lib/sparc/libnet.so
    0xfe230000 /usr/lib/nss_files.so.1
    0xfe160000 /www/gmgwh/weblogic/6.1/sp4/lib/solaris/libmuxer.so
    0xfd0e0000 /usr/ucblib/libucb.so.1
    0xfd090000 /usr/lib/libresolv.so.2
    0xfd050000 /usr/lib/libelf.so.1
    0xfafd0000 /app/oracle/product/8.1.7.4/lib/libocijdbc8.so
    0xe1800000 /app/oracle/product/8.1.7.4/lib/libclntsh.so.8.0
    0xfafb0000 /app/oracle/product/8.1.7.4/lib/libwtc8.so
    0xfaf90000 /usr/lib/libsched.so.1
    0xfaee0000 /usr/lib/libaio.so.1
    Local Time = Wed Jan 19 09:09:31 2005
    Elapsed Time = 22367
    # The exception above was detected in native code outside the VM
    # Java VM: Java HotSpot(TM) Client VM (1.3.1_06-b01 mixed mode)
    #

    hi there
    i would direct my efforts to search for the culprit on who generated the signal (either a INT, TERM or HUP). The crash occurred is just but another side-effect. The VM received a shutdown signal and shld exit. Just that while exiting, it crashed.
    There is this bug
    http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4904881
    Which is pretty rare. I am not sure if you are encountering this bug but if u have a core, a pstack of the core should show > 2 threads with doing the signal shutdown.

  • New Camera RAW in Photoshop CC 2014 won't open multiple Panasonic RAW (.rw2) at the same time from Windows Explorer.

    New Camera RAW in Photoshop CC 2014 won't open multiple Panasonic RAW (.rw2) at the same time from Windows Explorer.  If I select 2 raw files and click "Open" Camera RAW will only open 1 raw, then when I click "Done" it will close and open the second, sequentially.  Previous Photoshop CC and RAW worked fine, it would open mulitple RAW at the same time.  How do I fix this?

    If it worked for you that way previously there isn't much to comment about. I just tried opening multiple images from Windows Explorer with Photoshop CS6 and Camera Raw 8.6, and the first image would open and when I clicked cancel then the second image would open. But if I wanted multiple images opened in Camera Raw to work on them simultaneously it was necessary for me to open them from Bridge. I just did it as an experiment because I normally use Lightroom. Anyway, IF it was a feature at one time to work as you described, it doesn't seem to be that way now.

Maybe you are looking for