/BIC/ namespace not modifiable, can't create PSA delete variant in process

Hello,
When I attempt to create a PSA delete process in a process chain, I get an error message as such:
Namespace '/BIC/' must be set to 'changeable' (transaction SE06)
Message no. R7063
I have had Basis dot his for me before and it worked, but it takes a lot of change menagement to do this. I have asked Basis to leave it modifiable in SE06, but they will not. Is that the only way to be able to create PSA process variants is to have Basis use SE06? I looked in Object Changeability, but nothing stuck out. I should not have to have Basis do this task every time. Please let me know if there is a better way.
Thank you.
Brent

Hi Brent
I believe /BIC/ namespace should remain modifiable where you are creating PSA deletion process.
You can check if that is the case in your system.
Check in TRNSPACE table with namespace /BIC/ .. changagle flag should be X. I think it should be in your production also
Regards
Anindya
Edited by: Anindya Bose on Mar 8, 2012 4:52 AM

Similar Messages

PSA Deletion variant in Process chain

When I add more than one PSA tables in one process step of Process chain would the deletion happen sequentially or parallelly?
In other words, if I have some 20 PSA tables to be deleted, can I put all of them in one step or should I put them in different steps - some 4 or 5 steps - to reduce load on system? (I need to keep only 2 days data in each table).

Hi,
it will happen sequentially. You can put them in one process step.
However, I recommend to include the PSA deletion systematically in each corresponding chain since you can control it and monitor it better.
hope this helps...
Olivier.
Message was edited by:
Olivier Cora

How can u creat LSMW port in Idoc Processing

how can u creat LSMW port in Idoc Processing
actullay i'm using Lsmw with bapi

Hello Ronei
             *After giving the project ,sub project ,object & short description
                  *go to menu bar click on settings in that select idoc inbound processing ,
                  *in that screen click on maintain port push button
                  *port creation screen will be displayed in that left menu expand the file
                  *after that select file_port
                  *click on copy button
                  *provide your port name
                  *provide the short description
                  *after that deselect the uni code check box
      --->*this is the main step
                 *in the directory you will provide the path of your flat file other wise your
                  project will be terminated after 13 th step .
thanks .
prasad gandepalli

Source system in PSA deletion variant

Dear Experts
In process chain PSA deletion variant,in source system column I will give the Development source system name(C6D),and after transport to the Quality styem(C6Q) Should I change this source system manually in qualtiy or system automatically will pick up the corresponding source system name?If not,what is the possible solution since we dont have any access in quality system.
Cheers
Rajesh

Thanks for the reply.I got doubt because in DEV we have to enter manually both DS and SOURCE SYSTEM manually...after importing to Quality will it change the source system name?...Can i take for grant...Pls confirm....
Rajesh

How to create the variable variant in process chains for ip

how to create the variable variant in process cahins for ip

Hi venky,
check these links
http://help.sap.com/saphelp_nw70/helpdata/EN/c0/980398e58611d194cc00a0c94260a5/content.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/c0/98038ce58611d194cc00a0c94260a5/content.htm
bhaskar

Namespace not found error when creating data server for xml with namespace

Hi
I tried creating XML data server in ODI with namespace in xml file. I followed the below steps but could not success in creating the dataserver. however when I remove the namespace in xml file I am able to reverse engineer the xml file.
1) Create xml data server
2) select xml driver - com.sunopsis.jdbc.driver.xml.SnpsXmlDriver
3) Provide the jdbc url - jdbc:snps:xml?f=D:/xmlnew/sample_namespace.xml&s=xmlns&d=D:/xmlnew/sample_namespace.dtd
xml content
<f:root xmlns:f="http://www.w3.org/TR/html4/">
<table>
<name>African Coffee Table</name>
<width>80</width>
<length>120</length>
</table>
</f:root>
DTD content
<!ELEMENT f:root ( table ) >
<!ELEMENT length ( #PCDATA ) >
<!ELEMENT name ( #PCDATA ) >
<!ELEMENT table ( name, width, length ) >
<!ELEMENT width ( #PCDATA ) >
when I test connection it shows the following error.
java.sql.SQLException: The model generated by the model mapper was not accepted by a validator: Model not accepted: Namespace not found:
     at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.doGetConnection(LoginTimeoutDatasourceAdapter.java:133)
     at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.getConnection(LoginTimeoutDatasourceAdapter.java:62)
     at com.sunopsis.sql.SnpsConnection.testConnection(SnpsConnection.java:1100)
     at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.getLocalConnect(SnpsDialogTestConnet.java:371)
     at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.localConnect(SnpsDialogTestConnet.java:794)
     at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.jButtonTest_ActionPerformed(SnpsDialogTestConnet.java:754)
     at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.connEtoC1(SnpsDialogTestConnet.java:137)
     at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.access$1(SnpsDialogTestConnet.java:133)
     at com.sunopsis.graphical.dialog.SnpsDialogTestConnet$IvjEventHandler.actionPerformed(SnpsDialogTestConnet.java:87)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
     at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:272)
     at java.awt.Component.processMouseEvent(Component.java:6289)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
     at java.awt.Component.processEvent(Component.java:6054)
     at java.awt.Container.processEvent(Container.java:2041)
     at java.awt.Component.dispatchEventImpl(Component.java:4652)
     at java.awt.Container.dispatchEventImpl(Container.java:2099)
     at java.awt.Component.dispatchEvent(Component.java:4482)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
     at java.awt.Container.dispatchEventImpl(Container.java:2085)
     at java.awt.Window.dispatchEventImpl(Window.java:2478)
     at java.awt.Component.dispatchEvent(Component.java:4482)
     at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:644)
     at java.awt.EventQueue.access$000(EventQueue.java:85)
     at java.awt.EventQueue$1.run(EventQueue.java:603)
     at java.awt.EventQueue$1.run(EventQueue.java:601)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
     at java.awt.EventQueue$2.run(EventQueue.java:617)
     at java.awt.EventQueue$2.run(EventQueue.java:615)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Caused by: java.sql.SQLException: The model generated by the model mapper was not accepted by a validator: Model not accepted: Namespace not found:
     at com.sunopsis.jdbc.driver.xml.SnpsXmlDTD.initialize(SnpsXmlDTD.java:389)
     at com.sunopsis.jdbc.driver.xml.SnpsXmlDTD.initialize(SnpsXmlDTD.java:421)
     at com.sunopsis.jdbc.driver.xml.SnpsXmlDTD.<init>(SnpsXmlDTD.java:150)
     at com.sunopsis.jdbc.driver.xml.SnpsXmlSchema.<init>(SnpsXmlSchema.java:478)
     at com.sunopsis.jdbc.driver.xml.SnpsXmlSchemaManager.createNewSchema(SnpsXmlSchemaManager.java:292)
     at com.sunopsis.jdbc.driver.xml.SnpsXmlSchemaManager.getSchemaFromProperties(SnpsXmlSchemaManager.java:270)
     at com.sunopsis.jdbc.driver.xml.SnpsXmlDriver.connect(SnpsXmlDriver.java:114)
     at oracle.odi.jdbc.datasource.DriverManagerUtils$DriverProxy.connect(DriverManagerUtils.java:23)
     at oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriverManager(DriverManagerDataSource.java:368)
     at oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriverManager(DriverManagerDataSource.java:352)
     at oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriverManager(DriverManagerDataSource.java:316)
     at oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnection(DriverManagerDataSource.java:275)
     at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.doGetConnection(LoginTimeoutDatasourceAdapter.java:99)
     at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.getConnection(LoginTimeoutDatasourceAdapter.java:62)
     at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter$ConnectionProcessor.run(LoginTimeoutDatasourceAdapter.java:217)
     at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
     at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
     at java.util.concurrent.FutureTask.run(FutureTask.java:138)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
     at java.lang.Thread.run(Thread.java:662)

Hi,
Thans for your reply.
This is the DTD for my xmldoc.
<!ELEMENT Data (Department+)>
<!ELEMENT EmployeeID (#PCDATA)>
<!ATTLIST EmployeeID col (EMPID) #IMPLIED>
<!ELEMENT Education (EmployeeID, Sequence, Dgree)>
<!ATTLIST Education table NMTOKEN #IMPLIED>
<!ELEMENT Employee (EmployeeName, EmployeeID, DepartmentID, Education*)>
<!ATTLIST Employee table NMTOKEN #IMPLIED>
<!ELEMENT EmployeeName (#PCDATA)>
<!ATTLIST EmployeeName col NMTOKEN #IMPLIED>
<!ELEMENT DepartName (#PCDATA)>
<!ATTLIST DepartName col NMTOKEN #IMPLIED>
<!ELEMENT Table (Column+)>
<!ATTLIST Table importType NMTOKEN #IMPLIED>
<!ATTLIST Table parentTable NMTOKEN #IMPLIED>
<!ATTLIST Table tag NMTOKEN #IMPLIED>
<!ATTLIST Table columns NMTOKEN #IMPLIED>
<!ATTLIST Table name NMTOKEN #IMPLIED>
<!ELEMENT DepartID (#PCDATA)>
<!ATTLIST DepartID col NMTOKEN #IMPLIED>
<!ELEMENT MetaData (Table+)>
<!ELEMENT Sequence (#PCDATA)>
<!ATTLIST Sequence col NMTOKEN #IMPLIED>
<!ELEMENT Dgree (#PCDATA)>
<!ATTLIST Dgree col NMTOKEN #IMPLIED>
<!ELEMENT Export (MetaData, Data)>
<!ELEMENT DepartmentID (#PCDATA)>
<!ATTLIST DepartmentID col NMTOKEN #IMPLIED>
<!ELEMENT Column (#PCDATA)>
<!ATTLIST Column deleteKey NMTOKEN #IMPLIED>
<!ATTLIST Column isKey NMTOKEN #IMPLIED>
<!ELEMENT Department (DepartName, DepartID, Employee+)>
<!ATTLIST Department table NMTOKEN #IMPLIED>
Thanks again!
Yan

Is there any spinControl in Java? If not how can i create it. Thanks in adv

I need a controller which will increment and decrement the integer value in the textField. Just like the spin control of printdialogbox of word or netscape. How can I create it?

There is JSpinner in JDK 1.4.
If you are using an earlier version, you will need to create your own.
All you need is a JTextField and two buttons. Attach actionListeners to the buttons, and depending on which button is selected, change the JTextField value.
Hope that helps.

PSA deletion variant - Syntax error in program "SAPLRS_PSA_DEL_GUI

Hi.
Recently, we have implemented the note 1357168 to overcome the error "Object name &1 after the prefix has to start with ABC...XYZ".
But after that if we maintain any PSA/Change log variant we are getting the below error Syntax error in program "SAPLRS_PSA_DEL_GUI.
We have identified the class CL_RS_PSA_DEL_MASS_DELETION for that. but not able to figure it out what is the issue.
please help.

check this
Note 1388321 - 7.01SP6:Short dump in maintaining PSA deletion variant

Why the contract data is not modifiable when I create a order

I have already assigned the Contract Profile to a sale order type in the Sale order type definition, and the contract profile has been set correct.
When I create a order by this order type (Ive tried both copy and create a new order type), I cant modify the contract data from Goto>Header>Contract data,
what is the reason, how can I reset it, appreciate for your help, Thank you!

hi,
contract is an agreemet made following which we create a sales order called a release order. so, we only refer that and release whats being agreed as part of contract.
Let us look at this situation from a business point of view. so once you create a contract profile and assign to sales order, we cant modify it at the sales order level.
Hope it helps. Pl reward if useful.
Thanks,
Sadhu Kishore

Put quantity position of sales order not modifiable with delivery created

Hi experts,
Actually, in my sales orders positions it is possible to change the order quantity after I have the delivery created. (the delivery is not partial)
I need change this to make not possible modify the order quantity of sales order when I create the delivery.
Is it possible??
Thanks in advance

Hi
Go to t code OVAH and change the message application area V4 msg no 96 from warning to error
This will fulfill your requirement
Path to OVAH
img-SD-Sales-Sales documents--Define variable messages
Regards
Raja

Catalog will not load can't create a new one

I deleted cookies@yesterday and now my catalog will not load and nothing is working

Please tell us some basic information, such as
Operating system
version of Lightroom
what happens when you try to open Lightroom (what do you see on the screen, what error messages appear, etc.)

How can i Create a PROGRESSIVE BAR while process of a procedure is going

hi,
I have a push button in my form that runs the procedure .the process will approx 15 minutes. while processing is started, i want to display PROGRESSIVE BAR
until process complete and exits automatically after process . please suggest me how to create the same, is it possible..
please send me solution as soon as possible please
thanks in advance
prasanth

The forms demos contains a progress bar bean which you can use if web deployed.
Regards
Grant Ronald
Forms Product Management

I can't create or delete emails

I was emailing from my ipad2 using my hotmail account and had no issues. I then started emailing from my iphone4 and had no issues but when I went back to try to email from my ipad2 it won't let me create, reply or delete emails. I've checked the mail settings on my iPad and can't see any issues. Does anyone know why this has happened and what I can do to fix it?

A Reset will cure many ills...   http://support.apple.com/kb/ht1430
Also. See here   Setting up and troubleshooting Mail
From Here   http://www.apple.com/support/ipad/mail/

PSA Delete for chain process

Hi experts,
We are "upgrading" a load process that is using ABAP routines, Events and Infopackage groups to delete index, rollup agregattes, load some cubes, ... into a chain (RSPC chain).
We have some problems when it comes to delete some PSA's, the infopackages are 3.5 version, so PSA isn't like 7.0 PSA. They have an individual PSA for every package.
But the chain process "Delete PSA" only works for datasources PSA (7.0 PSA's), it only allows to select datasources.
Is there any chain process to delete 3.5 PSA's ? Or any notes about this issue.
Thanks in advance.

Hi John,
you could take a look at the following document on SDN.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a02ba9e7-bb6f-2c10-09b4-e86b9fcbad41?quicklink=index&overridelayout=true
This should also work in case of a 3.x PSA.
regards,
Raymond Baggen
The Future Group

I Can't create and add en entry in Ldap using Java

Hello there,
I'm pretty new to LDAP programming, and I have been trying to create and add an entry to a directory using the code sample provided in the JNDI tutorial, but for some reasons, I didn't manage.
the configuration file is well set up because I can't create, add, delete and modify just about anything I want from openLDAP command lines, but my real problem is to do it with java.
here is my code:
import java.util.Hashtable;
import javax.naming.ldap.*;
import javax.naming.directory.*;
import javax.naming.*;
import javax.net.ssl.*;
import java.io.*;
public class Newuser
     public static void main (String[] args)
          //LDAPEntry myEntry = new LDAPEntry();
          Hashtable<String, String> env = new Hashtable<String, String>(11);
          String adminName = "CN=ldap_admin,o=JNDITutorial,dc=img,dc=org";
          String adminPassword = "xxxxxx";
          env.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.jndi.ldap.LdapCtxFactory");
          //set security credentials, note using simple cleartext authentication
          env.put(Context.SECURITY_AUTHENTICATION,"simple");
          env.put(Context.SECURITY_PRINCIPAL,adminName);
          env.put(Context.SECURITY_CREDENTIALS,adminPassword);
          //connect to my domain controller
          env.put(Context.PROVIDER_URL, "ldap://localhost:389/o=JNDITutorial,dc=img,dc=org");
               // Create the initial directory context
               //JNDILDAPConnectionManager jndiManager = new JNDILDAPConnectionManagerImpl();
              try{
                   DirContext ctx = new InitialDirContext(env);
                    System.out.println("Connection to LDAP server done" );
                   final String groupDN ="ou=people,o=JNDITutorial,dc=img,dc=org";
                  //DirContext dirCtx = jndiManager.getLDAPDirContext();
                  People people = new People("Thiru","Thiru","Thiru Ganesh","Ramalingam","ou=people","[email protected]");
                  // The Common name must be equal in Attributes common Name
                  ctx.bind("cn=Thiru," + groupDN, people);
                  System.out.println("** Entry added **");
                  //jndiManager.disConnectLDAPConnection(ctx);
              }catch(NamingException exception){
                  System.out.println("**** Error ****");
                  exception.printStackTrace();
                  System.exit(0);
}adn this is the class People that i want to instantiate
import java.util.Hashtable;
import javax.naming.Binding;
import javax.naming.Context;
import javax.naming.Name;
import javax.naming.NameClassPair;
import javax.naming.NameParser;
import javax.naming.NamingEnumeration;
import javax.naming.NamingException;
import javax.naming.directory.*;
public class People implements DirContext {
     public People(String uid,String cn,String givenname,String sn,String ou,String mail) {
    BasicAttributes myAttrs = new BasicAttributes(true); //Basic Attributes
    Attribute objectClass = new BasicAttribute("objectclass"); //Adding Object Classes
    objectClass.add("inetOrgPerson");
    /*objectClass.add("organizationalPerson");
    objectClass.add("person");
    objectClass.add("top");*/
    Attribute ouSet = new BasicAttribute("ou");
    ouSet.add("people");
    ouSet.add(ou);
    myAttrs.put(objectClass);
    myAttrs.put(ouSet);
    myAttrs.put("cn",cn);
    myAttrs.put("sn",sn);
    myAttrs.put("mail",mail);
}as I said, I can add the new entry using an LDIF file "new.txt" that looks like this:
dn:cn=Hamido Saddo,ou=People,o=JNDITutorial,dc=img,dc=org
cn:Hamido Saddo
mail:[email protected]
telephonenumber:3838393038703
sn:hamido
objectclass:top
objectclass:person
objectclass:organizationalPerson
objectclass:inetOrgPersonusing the following command:
ldapadd -D "cn=ldap_admin,o=JNDITutorial,dc=org,dc=img" -W -f new.txtand eveything works
but when i try with the java, i get the following error:
javax.naming.directory.SchemaViolationException: [LDAP: error code 65 - entry has no objectClass attribute]
so, can anyone help me please !!!

uncomment these lines
/*objectClass.add("organizationalPerson");
objectClass.add("person");
objectClass.add("top");*/
you need all of them to add successfully
your LDIF has all the four lines
objectclass:top
objectclass:person
objectclass:organizationalPerson
objectclass:inetOrgPerson
hope this helps

/BIC/ namespace not modifiable, can't create PSA delete variant in process

Similar Messages

Maybe you are looking for