Big iPhone/Android Question

Hey guys, i am due for an annual upgrade pretty soon, however my actual upgrade for NE2 is in August, i was really debating to get the iphone when verizon gets it or the LG Ally phone. I hear go with a droid, what do you guys suggest??

lack of multi tasking on the iphone is not a verizon thing, its an apple thing
you can multitask on the iphone, with limited results.
it uses an app for that, and the apps that are running must be writtin to use the multi tasking app
texting and surfin on verizon network is limited on any phone
you temporarily lose your data connection when the text is sent or recieved.
you cannot talk and surf at the same time either, its a techonolgy thing, cdma does not do this
gsm does, lte will (i think)
multitasking is running 2 apps at the same time.
think of windows and running excell and word at the same time.
windows mobile does it, android does it, iphone is possible (if the software is written properly

Similar Messages

A few quick questions about publishing for iPhone/Android

I'm currently developing an iPhone/Android game in CS5 and I just have a few quick questions. If anyone can answer even one or two I'd really appreciate it
1- I'm developing using a 320 x 480 resolution for the iphone. When I tested it, the status bar on the top of the screen makes the edges disappear. How should I turn off the status bar? And if I can't what resolution should I use?
2- The performance is a little slow, and the game isn't very intense at all. What's a good way to improve performance?
3- For Android, what should I do for the resolution? Is there a standard resolution or do I have to have multiple resolutions for multiple devices?
4- Finally, is it worth getting the free trial of CS5.5 before I publish? Is there anything in there that will be a huge improvement over CS5?
All help is appreciated

1. Publish in fullscreen
2. Use bitmaps, cache all bitmaps, use minimized looping structure etc.
http://www.yeahbutisitflash.com/?p=986
3. Android: 480 * 800
4. Not that much, but you have GUI updates and have a GUI publishing screen for packager for iphone too.

Weak iphone/android Wifi signal in rooms, APs in hallway

Hi...
I am struggling with weak signal coverage inside rooms where APs are hung on the outer walls of the rooms i.e. on the hallway, one the sides, not on the cieling. Laptops work fine but mobile devices (iphones, androids, ipads) suffer the most. The hallaway is approximately 30m long, having 4 large rooms, two on either side of the hallway. The walls are made up of cinder blocks with concrete pillars. We have installed 4 2602 APsin the hallway, each with 4 external antennas, in an alternate fashion, i.e. first AP on the left side of the hallway, second on the right, third again on the left, fouth on the right again. The APs are approximately 4m apart.
We are using
WLC 5508 7.4.100.0
Cisco 2602 APs with 4 external antennas
I have read the Cisco document of Best practices for Apple devices and enabled all 'n' data rates. That helped a little bit but I know we can get better coverage. I am suspecting that RRM is reducing the Tx power levels since the APs are all in the line of site.
I have to admit that a precise site survey was not performed but I hope to get some advice on tweaking the Tx levels in my scenario.
I am attaching 2 screen shots of the hallway APs (circled) in b/g/n and a/n showing the Transmit levels. I have tweaked one AP tx level only (circled, changed form 4 to 3 under a/n) but didnt get the time to see the results.
All help is appreciated

Thanks for the replies,
Leo,
I have tried to convince our people to place the APs inside, but they rejected this based on health concerns. I tried to dig up something from the internet to alleviate their fears but was not successful. The view of four antennas is what scares them most. Maybe I will remove the antennas and then try to convince them again.
Scott,
You have mentioned to position the external antennas in a vertical fashion. We have 4 per AP. Shall I point all the four in vertical upward direction or the top two upwards and the bottom two downwards? Just to remind you again that our APs are not mounted on the ceiling but on the side walls of the hallway.
I will force the Tx levels to 2 on all the 4 APs and hope interference will not degrade performance further.
Thanks again

Building SAP applications for iPhone, Android etc.

Hi All,
We have a requirement for building SAP online and offline applications for iPhone, Android, Windows phone. These applications would interface with SAP backend (ERP) for fetching data or for executing simple tasks like approvals etc.
We have developed thin client (online) applications using Webdynpro Java for Blackberry users. These applications are browser based applications (deployed on SAP Netweaver WAS) and are accessed through Blackberry browser. What I am not sure is whether the same approach/technology like Webdynpro for Java would work for handhelds like iPhone, Android and Windows phones.
Secondly whether vendors (like Apple) of iPhones, Android etc. provide specific connectors or frameworks for building SAP online/offline applications (or in other words what would be the mechanism for integrating iPhones, Android with SAP)
Lastly how (technology, architecture etc.) are SAP thick client or offline applications built for iPhone, Android etc.
Any pointers would be of great help.
Thanks & Regards,
Suresh

Hi Philipp,
Thanks for your quick response. When you say integrating with "Integrating Custom Client with DOE", do you mean the usage of SAP Mobile Infrastructure (now know SAP NetWeaver Mobile).
We are mainly looking at building online (thin client) applications and also parallely at building offline or thick client applications but that is second in priority.
What we have done so far
We have developed thin client (online) applications using Webdynpro Java (which interface with SAP backend systems)
for Blackberry users. These applications are browser based applications and are accessed through Blackberry browser. We are looking at similarly building applications for iPhone, Android and Windows phones probably using the same technology like Webdynpro Java. But we are not sure how well it would work on iPhone, Android etc. Also we were exploring to see if these vendors (iPhone, Android) provide some sort of connectors or framework for quickly developing and deploying SAP mobile thin client applications.
Please note that we are aware that using webservices in one generic approach.
Once again thank you very much for your response.
Regards,
Suresh

Accessing iPhone & Android Contacts list from AS3?

Hello,
Is it possible to get the contact list from the iPhone & Android agenda (mobile and SIM card) by using AS3?
Regards.
J. Pablo.

Hello,
I have to test it, but seems like it is almost the only reference to this issue.
I have also found few other things related to this link:
http://extensionsforair.com/extensions/contact-editor/
And another one related just to iOS:
https://code.google.com/p/as3iphone/source/browse/trunk/Classes/com/flashiphonedevelopment /address/IPhoneAddressBook.as
I have to test them, and I am very new, but thanks for your interest and help.
Regards.
J. Pablo.

Android/iPhone micortransaction question

Hello,
I am aware Android has a microtransaction feature where the owner of the phone gets billed.
What is the AS3 code to access this functionality.
I'm currently designing a Freemium ap, and my design decisions require knowing if this is easy or difficult to do.
Also is there code to do it for iPhone?
,Jim

Here is how to do it in Android: http://android-developers.blogspot.com/2012/12/in-app-billing-version-3.html
How do I do it in Flash Builder?
An answer to this question and I'll start up development to a GPS coordinate game.

Voice over WLAN - Cisco 2504 and iPhones/Androids

All:
I'm working on a solution for someone who already has a Cisco WLC 2504 running 7.6.100 and 2602i APs. They are running iPhones with a SIP application instead of purchasing Cisco 7925G phones. They are having issues when roaming to different APs.
Site survey is good. I also used a laptop with Net Surveyor on it - signal looks good. SNR is good. They used to have coverage issues as well but I got that taken care of for them. Only issue now is roaming.
WLAN SSID:
-Qos: Platinum
-FT-PSK and PSK enabled
802.11a/n/ac Radio:
-Client Roaming: -67dBm for RSSI threshold and -62dBm for scanning threshold.
-Disabled 6mbps and 9mbps and 12 mbps is set to mandatory. All others are supported
802.11b/g/n Radio:
-Client Roaming: -67dBm for RSSI threshold and -62dBm for scanning threshold.
-Disabled 1mbps - 12mbps. 18mbps set to mandatory. All others are supported
Switch to which WLC is connected:
-switch ports used to connect to the controller are set to trust CoS and ports to APs and uplinks are set to trust DSCP.
With these setting changes - I believe most everything else is default. I am confused about the following:
-Best practice link - http://www.cisco.com/c/en/us/td/docs/wireless/technology/vowlan/troubleshooting/vowlan_troubleshoot/2_Gen_Troubleshooting_Guidelines.html
Says to configure voice WLAN to use 802.11a. Issues with that: Some Android's could not connect AND the big one - I am not able to set Qos to use 802.1p for the SIP WLAN. It tells me to disable 802.11a and 802.11b. If I go into each radio on 'Network' tab and disable these - NOTHING can connect to any SSID. So unless I've misunderstood something - this is a contradiction in the best-practice link I posted above.
another question: If I enable FT-PSK and PSK - for devices that support FT-PSK (which i'm under the impression is 802.11r) will these devices use that and for devices that don't they'll use 'regular' PSK? How do I know if my client is connecting using PSK or FT-PSK as both are enabled on the same WLAN.
Again - only issue is roaming. I second or two of 'choppy' voice then everything is back to normal working as expected. Any ideas as to what else I can enable to get these iPhones to roam better - if this is even possible. Can iPhones roam using a SIP app with zero voice interruption? This is the equipment that they got and can't get anything else so I got to make the best of this. Perhaps I've already done that? Any ideas/suggestions are very much appreciated.

Hi
Before any other think I would like you to upgrade your WLC image to 7.6.130.0 & FUS to 1.9.0.0. FUS upgrade will require 30-40min downtime to your wireless.
http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/fus_rn_OL-31390-01.html
http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn76mr03.html
It tells me to disable 802.11a and 802.11b. If I go into each radio on 'Network' tab and disable these - NOTHING can connect to any SSID. So unless I've misunderstood something - this is a contradiction in the best-practice link I posted above,
This simply says, you have to disable radio band before changing QoS profile values. Once you change those value you can re-enable the radio band. :)
If I enable FT-PSK and PSK - for devices that support FT-PSK (which i'm under the impression is 802.11r) will these devices use that and for devices that don't they'll use 'regular' PSK? How do I know if my client is connecting using PSK or FT-PSK as both are enabled on the same WLAN.
Read these 802.11r post & you will understand how 802.11r works. There are certain client devices does not like PSK & FT-PSK capability advertise on the same SSID & may have connectivity issues. But most of the clients like iPhone, iPads,etc will connect without any problems.
http://mrncciew.com/2014/09/06/cwsp-802-11r-ft-association/
http://mrncciew.com/2014/09/07/cwsp-802-11r-over-the-air-ft/
http://mrncciew.com/2014/09/08/cwsp-802-11r-over-the-ds-ft/
"show client detail <mac_address>" should indicate if client connected over FT-PSK or PSK.
HTH
Rasika
**** Pls rate all useful responses ****

Creating Help for Iphone/Android app

I need to create help for an iPhone and Android app using RoboHelp 10.
Which option do I choose for a New Project: Blank Project or Application Help?
And, which output do I choose under "File > Generate"? I see an option for "Native Mobile App." But, I'm not seeing a "Multiscreen HTML5" option.
Which file do I give the developer?
Thanks for your help!

That's a pretty big question and you haven't given us any clues such as which version of RoboHelp you are using and whether it is just this form of help that is new to you or help in general.
It doesn't really matter whether you choose Blank Project or Application Help as they are just starters with different default topics and you will be trashing them anyway. For now let's say start with Blank Project and create your topics. You do need to keep in mind they will be viewed on various devices. More about that later.
When that is done you start thinking about creating a suitable output. Multiscreen HTML5 is the output in RoboHelp 10. RoboHelp 11 was released today and that has a new output, Responsive HTML5. That is simpler, especially first time out. Both of those types are intended for use where they will be viewed via a browser, be that on a desktop or a mobile device.
It is not clear whether you want your company's app to access help in that way or whether the need is for the help to be an app in its own right. The latter adds another layer of learning. Essentially after creating an HTML5 output, you use the script to create an app. From the questions you ask, I suspect you will need developer assistance with that.
Start by viewing my page at http://www.grainge.org/pages/authoring/html5/html5.htm where you can download a project with information inside, include some ideas about how to write content.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

HT5312 BIG PROBLE - security questions

I created my account almost 2 years ago, i never had a problem (well no big ones) it let me buy stuff in both my iphone and apple tv but not in my laptop, it never mattered because i just got song in my phone and tv stuff in the apple tv and it automatically downloads in my laptop, but now we get to my big problem I can't buy anything in my phone. I put my password and it clams it is the first time buying for this phone and I have to answer security questions (I can't seam to get the right answer) but It was working and I download tons of things but suddenly it's asking me to answer the questions that I just don't have a anwser to. What should I do ?

You need to contact Apple, either through the link in that article or by phoning them and asking for the Account Security team.
(85310)

MSI Big Bang Marshal - Questions

Hello all
I am new here and I have been doing research on components for a new computer I am making a shopping list for. I have a few questions I have not been able to find any information online. Here goes
1. Anything specific I should know about the motherboard other then whats in the specs? Problems, quirks, etc?
2. Does the motherboard only support 2x Dual Video cards like 2x Nvidia GTX 590 or can I use 4x Nvidia GTX 480s?
3. P67 motherboards with the nf200 on them support 24 pci-e lanes. if I use:
PCI_E1 - 8x
PCI_E3 - 8x
PCI_E5 - 8x
PCI_E7 - 8x
Makes up 24
But there are still:
PCI_E2 - 1x
PCI_E4 - 1x
PCI_E6 - 1x
PCI_E8 - 1x
Left. Does that mean there are no lanes left and I coudnt even fill anything in the other 4 slots like PCI-E Sound, etc?
4. If you do Dual, Tri, Quad-SLI and have a PhysX card, how many PCI-E lanes will your PhysX card consume? Is it set by the NVIDIA control panel, the number of lanes of the chipset divided by the mount of video cards or by the card itself?
5. When people say Dual, Tri, Quad-SLI +PhysX, does it mean (Dual -1(PhysX), Tri -1(PhysX), Quad -1(PhysX) or does it mean (Dual +1, Tri +1, Quad +1)?
6. I know Scalability of increasing arrays of video cards is pretty poor, but could I do Quad SLI +PhysX using the MSI Big Bang Marshal?
7. Which is most advantageous, Tri SLI +PhysX, Quad SLI, Quad SLI +PhysX?
8. Sorry, probably not related, but I wanted to do Raid with SSD's for very fast reads and writes yet have redundancy. I wanted to get some OCZ Vertex 3s and I was reading about how Raid 5 was interesting but apparently Raid 5 increases the degredation of SSD? Has anyone experienced this or have any suggestions on best raid configurations?
Thank you for all of your help

Quote
P67 motherboards with the nf200 on them support 24 pci-e lanes. if I use:
PCI_E1 - 8x
PCI_E3 - 8x
PCI_E5 - 8x
PCI_E7 - 8x
Makes up 24
By my count, that makes 32 lanes. If not done so, a lot of pre preparation information can be gathered at the MSI Global Website. All the basic & more detailed information can be found there. The downloadable pdf manual is usually much more comprehensive than the manual that comes with the board as well, & can probably answer a lot of your questions. I don't believe the board can do Quad GTX 480 SLI.

I need someone to answer a few Find my Iphone App questions?

I lost my phone overseas...I got too drunk and lost it at some bar..I thought I was lucky because I had signed up for the find my iphone app on the ICloud. When I tried to locate my Iphone through the services, It couldn't find my Iphone because it was "OFFLINE" I assume it was because it was out of battery, making it impossible to find it now.
So I requested that my phone be put it in "lost mode", but since it's currently offline, it's Pending! I also added a contact number and a 50$ reward for the return of my phone, so the next time my phone is turned on and connects to the internet, it will lock and the stranger using my phone won't be able to get in to it and steal my info right?...But, seeing as my time is almost up being overseas, it seems very unlikely I'll be getting my phone back. So I might have to get a new phone!
My Question is, if I click on "Erase Iphone" now, it will erase all the data on my phone, And it won't be able to be tracked anymore, that's all fine and good. But the thing is, since my phone is currently off line, it's currently a pending action and won't erase the data unless it's turned on and connected to the internet again....SO, if I were to get a New Iphone, (I am eligible to uprgrade) it would be risky right? Because if I get a new Iphone and get all comfy with a new iphone, and someone turns on my old IPhone, the "Erase Iphone" request will commence and it will delete all the data on my old iphone as well as my NEW iphone right?
Cause I will be using the same Apple ID for my new Iphone! I can only assume that this is how it works....Apple isn't very clear on how stuff like that works.
PLEASE PLEASE HELP!

You don't need to worry. It won't delete anything from iCloud or your new phone, it will only erase the data on the lost phone, and that will only happen if it ever goes online again.

Web Gallery with iPhone, two questions

I now have three albums in my web gallery. When I take a picture with iPhone and go to upload to web gallery, only one of the albums shows up. Why not the other two?
Second question: i successfully sent the photo to that one albumb web gallery, and sure enough, it shows up when I view it in my web browser. But it was only a test and I want to delete it. How do I do that? Because when I view that album in iPhoto, the picture I uploaded from my iPhone isn't there.

Phil Rogers,
To upload to the Web Gallery your iPhone sends it via email. Make sure "Allow uploads via Email" is selected in the Web Gallery settings.
The little "radio waves" icon next to the Web Gallery in iPhoto 7.0.1 is clickable. Clicking on it will cause iPhoto to resync the Web Gallery between .Mac and the computer.
Hope this helps,
Nathan C.

Big iphone problem, please help

I was using the internet on my phone today and the iphone suddenly froze, i couldn't move the screen around and i could not use the sleep button to turn off the screen, or reset the phone. eventually the backlight dimmed, and the screen went black. I have tried using the forced recovery on the iphone, it doesnt work. When I switch the silence ringer option, it does not vibrate.I plugged it into my computer(PC) and it did nothing. I have had the phone for about 10 months now and it has never given me any sort of problem. It is like all methods of imput don't register. I am pretty sure it is dead. Please prove me wrong.

Have you tried to reboot the phone. Do that by holding down both the home button and the power on/off button until you see the Apple logo. When you said you tried the force recovery, you mean by holding the home button and plugging it into iTunes on the computer? If none of that works, then it is time to make an appointment with the Genius Bar. That can be done online at http://www.apple.com/retail/geniusbar
Hope that answers your question.

IPhone GPS question

Hello Everybody!
I'm a new iPhone user and new at iPhoneFans.
I'm from Brazil and I have an iPhone 3Gs without jailbreak and locked to my mobile company (Vivo). Next week I'm gonna to Orlando. It will work in roaming, but I will not use data connection in roaming because it is extremelly expansive (about USD$ 15 per MB).
I would like to know if I have a GPS software like Tomtom, and if I try to use it, it will need some kind of data connection for the aGPS assistance?
And other question is, there are some GPS software that I could buy just adicional maps instead the full software for each "map" or country?
Thanks for any help.
[]s
Tuts

Although the iPhone uses AGPS or assisted GPS, the iPhone includes a GPS receiver. The iPhone's AGPS allows for a GPS fix to be acquired faster only. It is not required to get a GPS fix.
Data roaming is turned off by default with the iPhone. Data access via the cellular network is not required to get a GPS fix, and if you have a GPS app with maps data for a geographic location downloaded and available locally on the iPhone with the app, no internet access is required for access to the maps data.

Big file saving question.

Dear all,
I am writing a foto ablum application in RIA.I want to save
all the fotos in bytearray,and then save it as a file in user's
computer,so that the user can open their file to retouch without
downloading or uploading.
Question is that I afraid if the fotos' filesize is too
big,it may make an error such as "out of memory".
What should I do,please?
Thank you!

I hope you try to say AIR instead of RIA. (bcuz RIA means
rich internet application = any asyn applicaiton including ajax
etc)
If you try to make it as a RIA application (which means it
runs in a browser), you can not touch to client's file system so
you need to send the data to server to make it downloadable.(any
php script that will get the bytarray, return an image would work
for this case)
for the AIR case, you dont need to worry for the file size
unless the user does not have enough space.

Big iPhone/Android Question

Similar Messages

Maybe you are looking for