Big problem with Nokia E60 and EAP-PEAP connection

At our University we have Wlan now.
The Lan based on the standart 802.11 b/g with 54 Mbit/s
The Authentifikation based on the standart 802.1x (Peap) with the connection WPA/TKIP.
My Firmware:
V3.0633.09.04
20-11-06
RM-49
Nokia E60
My Configuration:
Connection Name: FH-Hof
Data Bearer:Wireless LAN
WLAN netw.Name: FHHof
Network status: Hidden
WLAN netw.mode: Infrastructure
WLAN security Mode: WPA/WPA2
WLAN security settings:
WPA mode: EAP
TKIP-Security: allowed
EAP plugin settings:EAP-PEAP
User Cert: not defined
CA Cert: CA-FH-Hof
username in use: User configured
username: aschmidt
real in use: user configured
realm: FH-Hof
Allow PEAPv0: yes
Yes for v1 and v2
EAP: EAP-mschapv2
Username: aschmidt
prompt password: Yes
password: entered my password
Extended Settings:
IPv4-Settings: No Changes
IPv6-Settings: No Changes
Proxserver-Address: proxy.fh-hof.de
Prxy-Port-Number: 3128
If I started to try the connection I have to enter my Username and my password. After that the handy asked me about my username and password again after a time.
Now it takes circa one minute and the connection failed.
The Error-Message ist: No Connection! WPA authentification failed.
My´account is not blocked.
Have I to enter any Ciphers?
Thanks for every help and sorry for my bad English!
EDIT: Removed non english linkMessage Edited by sailer_one on 27-Apr-200710:07 AM
Message Edited by sailer_one on 27-Apr-200710:07 AM
Message Edited by sailer_one on 27-Apr-200710:12 AM
Message Edited by ajak on 27-Apr-2007 10:21 AM

also try change "WLAN security Mode" from WPA to 802.1x
I think Nokia referrs to WPA as WPA-PSK, but when you say TKIP then it also could be 802.1x as TKIP is the encryption used.
So infact your wireless domain might be a 802.1x/EAP-PEAP/MS-CHAPv2 network.Message Edited by mbil on 30-Apr-200702:58 PM

Similar Messages

Problem with Nokia Camera and Smart Sequence

Hi,
I'm having a problem with Nokia Camera and the Smart Sequence mode.
Basically, if you take a picture using nokia camera, and view it in your camera roll, it usually says, underneath the pic "open in nokia camera".
Well, if I take a pic using the Smart Sequence mode, it just doesn't say "open in nokia camera" so, to use the functions of smart sequence (best shot, motion focus, etc), I have to open nokia camera, go to settings and tap the "Find photos and videos shot with nokia camera" option.
Does anyone has the same problem? Anybody solved it?
I already tried reinstalling nokia camera, but that didn't help.
I'm running Nokia Black on my 925.
Thanks everyone!

Hi,
I had the same problem with my 1020. It did get fixed with the last update to Nokia camera.
However, IIRC, it didn't just happen right away. When browsing the camera roll I'm pretty sure that the "open with Nokia camera" text wasn't there.
Slightly disappointed I opened the (Nokia) camera anyway and was going to test the smart sequence again. I noticed the only precious pic I'd taken using this actually appeared top left of the screen.
I opened it and I had all the smart sequence editing options again - that we're missing previous. Made a new picture and saved it.
Now when in camera roll the text shows below the image and all is good.
This probably doesn't help much except that it didn't seem to fix automatically.
I work @Nokia so I can ask around a bit to see if this is a known / common issue (not that I know any developers)

Big problem with Airport Extreme and Vivax Provider in Brazil

Hello guys.
I live in Brazil and I bought my Airport Extreme in a recent trip to USA.
For some years I was a client of Telefonica and had an ADSL link, I had a D'Link G604T to do both the modem and router operation in the same box. I was happy with my connection of 1Mbps.
In a recent promotion of Vivax I switched to a cable connection to have both TV and Internet at the same operator, my link now has 3Mbps.
With this pack I also received free one RCA cable modem model DCM425B, it was installed fine in one computer only. Everything was fine my connection was faster the old one.
So I went to install the Airport Extreme to make things even better.
After I installed I went to see the web status of my modem, all parts were looking fine, but the modem could not see the computer. Bad sign.
I talked to Vivax support people and apparently it was a problem with their network setup and they manage to make it right. My model now sees my computer.
After that problem was solved I could not make AE to work with the modem, it had the green light and the setup looked fine, but I could not open any site. I tried to turn off my modem and AE, waited some minutes and turned on first my modem and after it was up I turned on AE. All lights looked fine but again no connection to any site.
I called again the Vivax support center and they tried to help me but the don't know AE and they could not help me with all the details but said there was 2 10.x.x.x coming from my side. So I tried to use in bridge mode. I also selected the 192.x.x.x range instead of 10.x.x.x as default.
After many setups and turn off and on again my connection is working but I have a big problem with wireless. If I turn it on I loose my connection, it seems that AE sends 2 equal ethernet address to Vivax and their network don't like it cutting me off.
So my connection setup is like this:
RCA Cable modem model DCM425B at 3Mbps using a 200.x.x.x ip
Airport Extreme connected to a Mac and a Windows PC by wire using the 192.x.x.x range ip
Wireless is off
Bridge mode is on
This the only way I could make it work.

After a firmware update it worked fine.

Big problem with nokia 6110 navigator

hello everybody.
1st of all excuse my english.
i bought my nokia 6110 navigator on september.
after a few days the phone seems to reset (the phone display the nokia logo but not play the nokia intro) and after the reset the speaker doesnt work any more (the phone doesnt ring when it receive a call).
i need to stop and start again the phone to use it again.
The dealer send the phone to a Nokia Care Point and after a month (!) the phone return with the same problem !
any advice ?
tvm, milko.

Nothing comes to mind. The problem could be either hardware or software.
You could try resetting the phone if you feel it is a software issue and don't mind the hassle of backing up and maybe having to restore all the data on your phone.

Problems with Nokia 6070 and CA-42 cable

Hi I have Nokia 6070, CA-42 cable, downloaded newest Nokia PC Suite (6.82), but I still have problems with connection. When I plug cable into the phone, it say : Data enhancement connected, and then Enhancement not supported. I properly installed Nokia PC Suite, but I still don´t have connection, because PC can´t recognise my phone. I tried many advices written here on discussion, like repairing cable drivers, re-installing PC Suite, restarting PC, but nothing works. Could you give me advice ?. Further informations in attached screenshot. http://img250.imageshack.us/img250/1193/nokia3in.jpg regards Viliam Tomaníček, Slovakia

12th Jan, 2010
Ok guys let's see if this helps... the problem is NOT Nokia PC Suite, the USB to Nokia Enhancement connector ie; the CA-42 data cable, your cell phone or your computer.
It's in your computer' settings... The answer to this problem with this particular cable is actually in the Nokia PC Suite "Help". It's under "Configuring connection types" They refer to it by name.
Unfortunately, (1) you kinda have to stumble into it... thank goodness I did and,   (2) you kinda have to be a bit of a computer geek to understand what they are trying to say...
The point is that they are basically tricking the computer to "see" the USB cable as a 9 or 25 pin serial DIN cable connection that would normally go into the COM1 or COM2 ports, which are still on the back of some PCs, but not available on modern laptops anymore.
My PC is Windows XP Service Pack 3. I will describe what I had to do to get the cable to work. Vista and Windows 7 users… just follow the principle.
You need to (1) configure Nokia PC Suite as well as (2) your PC/Laptop (in Control Panel) to "see" the USB connection as - COM3... here's how I did it for my PC.
Step - 1: Install the CA-42 Cable Drivers first using the install CD that was provided with the cable using "Found New Hardware" remember this is the XP experience...
Some preamble - I thought that installing the Nokia PC Suite does all the cable driver bits as well, but it looks like you actually have to install the cable drivers (Note – cable drivers first) and then the Nokia PC Suite app software separately. I got a “file not found error - ser2pl.sys” installing Nokia PC Suite. You don’t get that when you let the “Found New Hardware” wizard install it from the install CD. Don't restart your computer until the end of this rather lengthy two-step process... just click "Restart later"... I'll tell you when to restart...
START POINT (Still Step 1) - Ok, so now we are starting....
Shut down your system...
Plug in the CA-42 USB cable into a USB port. Important here… if you have a PC, decide on which USB port you are going to use ie; front or back USB ports. If you successfully install the cable drivers on one USB port, you cannot go taking out the USB cable and sticking it into another USB port on the same computer. You will lose the cable driver install completely. However if you plug the USB cable back into the original USB port used to install the cable driver software, it will re-appear in “Device Manager”. Maybe it does the same with laptops as well, I do not know..
Turn on your system... do not connect your phone to the CA-42 cable yet.
On restarting, Windows will find new device (CA-42 USB to Serial), try to install it automatically and come back and say... it was not installed properly (probably because of COM port conflicts)... let that finish, close it off and ....
While that was happening a "Found New Hardware" wizard will appear...let it happen.. do not close this.. let it sit and wait, we want to use this.... it is going to ask for the install CD, but guess what... when you insert the install CD (at least, if it's the same as the on I got) it’s going to kick off yet another install process.
Put the supplier's install CD in your player, that is going to kick off the CD's automatic install (autorun.inf), cancel it off.. do not run the automatic CD's install, it will not work !. Continue with Found New Hardware and let Windows find the CA-42 cable drivers on the install CD (from your drive D: or whatever) and install… do not restart your computer yet.
At the end of this, if you check Settings - Control Panel - System - Hardware - Device Manager - Ports (COM & LPT), you should see an entry for - "CA-42 USB (COM something). That COM something will probably be COM1 or COM2. Highlight this and right click.. go Properties, Port Settings, Advanced – In XP, there is a box to select “COM Port No.” Set this to COM3. The driver should say that the “device is working properly”. Click Apply, OK and exit Control Panel…. Do not restart yet..
So now we have XP set… let’s set the app…. Nokia PC Suite
STEP 2 – Setting Nokia PC Suite.
Some preamble - In July 2009, I bought version 6.4.8 of Nokia PC Suite with the CA-42 cable. I installed it and I was unable to get the cell phone to see “Nokia PC Suite”. After much trial and error, I flung it aside.
Well this past weekend , I decided to have another go at it.
I uninstalled it and downloaded and installed a more recent version from Nokia’s support site… version 7.1.40.1 … cell phone still giving “Enhancement not supported” message. Could not believe that I was that unlucky…
Again after much trial and error, I got it to work – a classic case of the simplest thing being so darn difficult…. So here goes..
Download the latest version of “Nokia PC Suite”, if the version you get is the one I got (7.1.40.1), , then you need to -
Do not connect the CA-42 cable to your phone yet. It should be connected to your computer on the USB end in it’s original install USB port !!
Start up Nokia PC Suite - Go Settings, Manage Connections
Tick off only “Serial Cable (CA-42), this should be in the list assuming you installed it correctly in Step 1
Highlight it and the little spanner (Configure) at the bottom should now be enabled
Click on Configure.. the little spanner
If it is saying “COM1” click on the little down arrow to the right. COM3 should come up in the list
Click on COM3… stop right here, do nothing
NOW…. you plug in the Enhancement end of the cable into your phone. If it still gives the “Enhancement not Supported” error, don’t panic. Make sure the cable is into the phone nice and secure. By the way, this cable tends to get “Disconnected” with the slightest movement of my almost 4yr old Nokia 6101. Make sure you are not using the phone and the phone is in standby mode. The phone MUST NOT be in “Contacts” or some other menu available in the phone otherwise it will not connect to Nokia PC Suite… STANDBY MODE please… I am sure I frustrated myself unintentionally by not paying attention to this detail.
Right, NOW you click on OK (the green check mark) … assuming everything else was done properly, after about 10 seconds, the model no. of your phone should appear in Nokia PC Suite. If you get this, you are going to have a blast with this software.
So cool – using my PC….. I have since been able to delete off a lot of junk (from inbox, outbox, images etc) and free up valuable memory, amend Contacts info, do a full backup of my phone onto my PC, load in a truncated MP3 file of Doobie Brothers, "China Grove" as my ringtone (...made it myself with a free MP3 editor - 1st 30 seconds – 433Kb… yeah huge… but worth it) etc…
Still getting the hang of this software…. The only digital camera I have is the one on my phone, so now that I can take pics and get them into my PC so easily, I am going to have a lot of fun with this software as well as with other aspects of it that I am not aware of yet.. I still have to install some kind of “Modem” drivers from the CD, and there is something about upgrading your phone software…..
It has only been three days since I got it to work but, folks.. This Nokia PC Suite is outraaaaaageous. !!!!!!!!
Oh I forgot…. Now you can restart your computer.
PS.. Whenever I restart/shutdown my system, I have to go and do the COM1 to COM3 part again in Nokia PC Suite when I turn it back on. I have not found a way to save the setting. Will try to attach a pic (yep…. taken with my phone, and downloaded into my PC !!!) of the CA-42 cable and CD that I got.
Hope this helps..
The "Add Attachments" button below is not giving me any feedback.... some help please ?

3 big problems with my gmail and my iphone 4 inbox...

I know these are not new issues to most people, but I just haven't found any solutions yet. I've had 3 main issues with my gmail and iphone 4 inbox:
1) I've had the same issues of these weird messages from 1969, and also from 2000. I've done everything mentioned on every forum available from hard reset of the phone and computer to switching everything imaginable on or off related to contacts, mail, threads, etc., deleting and resetting the account on my phone and computer, going to gmail help pages and adjusting imap, you name it, I've done it. They all seem to correct the problem temporarily, but then eventually at some point, these emails return and disappear by themselves at some point with no rhyme or reason and there's nothing I can do about them when they're present. I've called Apple several times and they always say the same exact thing about hard resetting, but it's never a long lasting solution.
2) After I delete multiple messages from my inbox, they often reappear as unread messages and I have to open and delete each one again which is really annoying.
3) Often I open an email and click on delete. The garbage can lid opens and the screen freezes with the lid open. I have to hit home to get out. When I go back to the inbox, it's white with nothing present on the screen. I have to go back and forth between apps and the inbox and eventually the inbox emails will reappear.
If anyone has any new solutions to any of these problems, please share the wealth because I'm tempted to stay with my Verizon blackberry and cancel this iphone/ATT account since I've never dealt with any of these persistent problems with other phones.
Thanks!

Actually there'll be something like this:
+3.3v -> 28A
+5v -> 32A
+12v -> 22A
-5v -> 0.5A
-12v -> 0.5A
Please check again.

Big problem with ARD agent and versions.

This is going to be a bit lengthy so please bear with me. At my company I'm in charge of our 6 production G5 computers. My boss has permitted me to install ARD on them so that I can run the specialty programs we have on one without having to walk all the way across the department time and time again. The computers are from varying times in terms of processor speed and RAM but they are all running the same OS with all the same updates. All were running the ARD 3.0 Agent as it was in an update from apple not too long ago. I have uninstalled the agent and used a custom client install pack from ARD 2.2.
My computer is a dual 2GHz G5 and is the oldest of the 6. (here on referred to as Mac2) The other computer with problems is a dual 2.5GHz G5 and is called Mac7.
Mac2 is supposed to have the admin program on it, and I can install it but the program fails to start because it was either installed wrong or the computer needs a restart. I had this same error on my laptop at home but that is a MBP which is Intel. To solve the problem on intel computers i've been told to remove the remote-management folder from core-services and let ARD reinstall it on launch. This has not worked for the G5 at work. Furthermore at one point i could get control of Mac2 remotely from another computer, but after trying to reinstall the admin program again I cannot do that anymore. Even if i reset all ARD software and use the custom client install .pkg again.
As for Mac7, that computer was being run with the 3.0 agent on it and i could connect fine but couldn't lock the screen because of the mismatch. I did the exact same uninstall and reinstall of the ARD Agent that I did on the other computers and now I can't access that one either.
At the very least I need to be able to control these two computers, and I would like to have the Admin software work on Mac2 if possible. I see no reason why these problems should be occurring.
All systems are running 10.4.10 and have no third party remote software installed on them. On both Mac2 and 7 the ARD menu drop-down is showing as not active. All sharing preferences have been set right and there is no firewall. All accounts on both computers have been given all the rights possible for control.
If anyone has any advice please reply to this.

OK, I am still a bit confused - Mac2 is your computer, the one on which you want run the admin app to control other computers, correct? If ARD 2.2 will not start on that one, does it give an error message? I really suspect there are traces of 3.x agent causing the trouble, as I have had this problem myself. In essence, if you have version 2.2 admin, there is no reason to have 3.x agent for any reason whatsoever, it will just cause problems both on the admin and client side since Apple completely rewrote the way it works.
And, based on the first paragraph of your initial inquiry, I wonder if ARD is worth the trouble anyway, since it seems you could accomplish what you need with a simple VNC viewer (my up and coming favorite is JollysFastVNC). If you can't connect with a simple VNC viewer, you also won't be able to use ARD, as it's an extension of the VNC protocol.
However, if you want to make this work, let's work on Mac2 - follow the instructions at this page, down at the bottom: http://docs.info.apple.com/article.html?artnum=108021
It says: "Mac OS X 10.2 clients" but it's also the correct procedure for a complete and clean removal in 10.3 and 10.4
Then reinstall ARD 2.2 admin (you may have an earlier version installer, then install the admin updater). Don't mess with your custom client installer stuff. Just install the 2.2 admin app, and it will install the client it needs. I think this will make Mac2 work for you.

Problem with Nokia 5200 and Flash Lite themes...

My problem is pretty simple to ask, but maybe not to easy to answer...
I downloaded many Flash Lite themes for my Nokia 5200, and my problem is that the animated icons for the grid (that are SWF files) don't show/animate.
Is it supposed to be like that?
The firmware is v5.53

Oh, I forgot this...
In Carbide.ui, the icons DO animate as they should.
Message Edited by wanny on 02-Sep-2009 05:52 PM

Problems with Installing iTunes and wireless network connection

Every time I attempt to install iTunes it completely kicks the internet off and an error comes up that the wireless network adapter to not connect or is not detected. My internet service is connected to a router which I receive wirelessly to my laptop. I do not understand why it is happening and to get the internet to work again I needed to do a system restore. Any ideas why this is happening. Also when iTunes was installed it came up correctly, it would just not connect to the net. I have had a previous version on my old laptop but since purchasing this new laptop I am having such difficulty. On another note, if this problem can be resolved, once iTunes is working is there a way to get the songs from my old computer onto the new? Thanks for the help in advance!

I just saw your post and I resolved this on mine for my wired connection. I'm willing to bet that the issue is the same for wireless. Here's what I found.
Issue:
During the installation, iTunes installs some network components related to mobile device support over ethernet(Apple Mobile Device Ethernet Service - netaapl.inf). At the same time, according the logs, the install process removed OEM18.inf. This almost exactly coincided with the time that I saw the network connection die (preceded it by a few seconds).
Basically, iTunes appears to be removing a required network component.
Resolution:
After installing iTunes and the network connection breaking, remove the network device from Device Manager and allow Windows to reinstall it automatically.
The following instructions are for Windows 7, but they are close enough to follow for other versions of Windows.
1. Click the Start button (Jewel in Vista and Win7).
2. Right-click Computer and click Manage in the menu that appears (type your password or click Yes if prompted).
3. On the left side of hte Computer Management window, click Device Manager.
4. Click the arrow (or plus sign) next to Network Adapters to expand that section.
5. Right-click your network adapter and click Uninstall in the menu that appears.
6. Click OK.
7. Reboot.
Windows should automatically detect and reinstall your network device on boot.

Big problems with Firewire iPod and camcorder - please help!

Hi all,
I don't know where else to turn with this problem. I think I've damaged my Firewire kit.
I have an iPod 4G 20GB and a Canon MV901 MiniDV Camcorder. I used them both over Firewire with my Pismo without difficulty, but I then tried video editing on my Windows machine with a firewire PCI card. Scrabbling around the back of my computer, I think I somehow managed to get the firewire cable to the camcorder in the socket upside down, reversing the power and data conncectors. Nothing really happened, but the camcorder stopped showing up. I tried it a good few times, then tried my iPod. By some bizarre coincidence, I think I managed to plug the iPod in the same way. Now, my iPod doesn't work on either the Windows machine or the Pismo over firewire, but does over USB2.0 on my Windows machine.
I measured the power going through the Firewire power pins as around 13.5 volts on my Pismo and the card, but the card also has an auxiliary power connector. This was disconnected when I tested it, but was connected when the iPod and camcorder were.
The thing I would like to know is whether a voltage spike of this size could fry the firewire controllers on both devices. The iPod's diagnostic mode detects that firewire is connected, but will not show up. Strangely, it still charges over firewire from either machine. Have I permanately damaged the firewire controllers?
Thanks in advance,
Rob Johnson

Rob,
If you mistakenly inserted the FireWire connector twisted 180 degrees, the power lines can be directly connected to the data lines and can result in a fried PHY (connects the port to the FireWire bridge) or the FireWire bridge itself.
You can take a look at the voltage specs for FireWire ports and see that your voltage readings are well withing specs:
http://docs.info.apple.com/article.html?artnum=58207
I am not sure where you go from here. You could try a known-good FireWire device connected to your Pismo and see if it works. If not, the data-side of the FW port may have failed. I don't know about testing the iPod or camcorder.
A possible cheap fix for the Pismo FireWire is a FireWire PC card; if running 10.x, it will just be a plug & play affair. However, unlike built-in FireWire ports, FireWire PC cards supply very little bus power. Your camcorder will work since it has it owns power supply (assuming there is no hardware failure) and but am unsure about the iPod. The iPod will not charge, of course, but it may still work in data transfers. There are a few FireWire PC cards that also have their own power supply.

Big Problems with Audigy 4 and Vista 64

Hi there,?I got the Audigy 4 running under Vista 64 Bit. The onboard Soundmax, connected to the speakers in my?Monitor?is acti've, too. The Audigy is connected to a 5. System from Teufel. With XP64 all ist working fine: The systemsounds come out of the monitorspeakers and the sound generated by mediaplayer etc. come from the 5. Sytem.Under Vista it is not possible to get a fine sound from the 5. System - if something is working, then only the satellites are working. The subwoofer is quiet. Also the sound from the 5. system is very bad, with a lot of breaks and so on. What?s this? How can I resolve this problem?By XP64 I have the possibility to change settings in Mediasoucecenter ... here I got nothing... rgds?McInternet?

I'm running the Audigy 4 with Vista 64-bit and it's working okay for me. It's not great - and it's pretty substantially crippled, but I'm getting sound. I would love to have proper EAX support and just some simple bass and treble controls, but it is working for me (using the March 9th drivers).

Big problems with MSI 6309 and Direct3D

Hello folks, I need som help here.... I have a MSI 6309 with newest BIOS, running XP with all updates. My graficdriver is Nvidia's newest. The Only card installed is a ASUS Geforce 2 MX400. I have 1 HDD and 1 CD-burner and 1 CD-reader. Now to the problems: When running DxXDiag it´s not possible to test Direct3D, the coputer hangs everytime. I tested my own card, a Leadtek Geforce 3 Ti 200 and the results are the same. Both cards running OK in my other computer.
What to do?? What to test??
Pleaze help me soon......

Quote
if this fails you may as well reinstall operating system.
When bogs dollocks says this, it doesn't mean you should install Windows XP over the top. If you can then you should deffinetly reformat and install XP afresh

Big problem with iTunes Match and subscription renewal -- think twice before you sign up!!

A little over a year ago I signed up for iTunes Match thinking it would be an excellent way to free up some space on my drive and save me some time by providing access to all of my music on my phone/ other devices. About 100gbs was uploaded without incident. I deleted that music from my drive thinking that iTunes match is like any other cloud based service. In August my subscription came up for renewal. In August I had also switched debit cards. The auto-renew failed. I received notification of such and then went to update my new card information with the account. The card information updated successfully, but when i then went to update my iTunes Match I would receive the error message #5002. So I called customer support. They politely agreed to rectify the situation and that I was not the only customer to face this situation, but said it would require contacting engineering to get a hard fix since in order for an account to renew a subscription they have to purge the library. This is fine because all of your iTunes account purchases are already backed-up. But it is not okay, if you have any other 3rd party music in your library. All of the 3rd party music I had uploaded from old CDs, converted LPs, or purchased through other online vendors would have to be deleted in order to renew my subscription. Engineering replied that there was no work around. This has left me at a weird impasse with customer support with no resolution. The music is just sitting there. I'm gladly willing to pay to renew my subscription, but because of bad engineering, deceptive advertising, and what I'm guessing is a greedy internal policy regarding 3rd party media, I stand to lose the couple thousand bucks just by being a loyal Apple consumer and choosing to use their product over alternatives in the market like Google Play. The morale of the story is this: ITUNES MATCH IS NOT A REAL CLOUD BASED SERVICE EVEN THOUGH IT IS ADVERTISED AS SUCH. Think twice before you sign up!

Hello Michael, I've been reading many of your splendid replies so perhaps you can help me as I can't seem to find the exact solution to what should be a simple problem. I got a new iPod Touch recently and after spending almost 3 hours on the phone with Apple today we discovered my account was so old it hadn't synched up correctly with Apple's new data requirement so an Apple manager was connected to me and eventually we solved several issues which I won't bother going into here. However, at some point in all this I saw Match show up and music from the iCloud was seemingly downloaded onto my new iPod. I was surprised to see this as I thought I'd done away with Match long ago, but with the new version of iTunes which eliminated over 300 playlists and all of my music from iTunes when it updated to the newest version last week, I suppose anything is possible.
What I want to do now is simply to be able to put my own music back onto my new iPod and ignore everything related to Match hoping it goes away and never returns. So I followed the online instructions to turn off Match, and now iTunes and my iPod say I need to subscribe to iTunes Match...but I still cannot download anything onto my new iPod and the 15,000 plus songs that appeared to be downloaded earlier when on the phone with an Apple manager are also no longer available. BTW, my Match subscription should be paid for, but I can't even figure out how to make sure it never gets updated again as this is nasty business scrubbing all 3rd party music off our own devices. Yuk. But can you help me please? Thus far, this experience with this new iPod Touch and the new iTunes 12.1 is the worst experience I have ever had with Apple and I own many Apple products.

Big problems with music menu and 3.1 update

whenever I try to access music through my "Artists" menu on my 2G iPod Touch after the 3.1 update, the music screen crashes and takes me back home, w/o ever successfully selecting the artist. Even weirder is whenever I go to "About" in system prefs, under number of songs and number of videos, it returns 0 for both. My Music can still be accessed through the "Album", "Playlist", and "Song" menus. If I attempt to open my video menu, it crashes as well and returns me to the home screen. Is ANYONE else having this problem?

I am having the same issue with the buttons. I am on a first generation 16gb touch and on my music menu the bottom buttons are set up as follows: playlists, artists, songs, podcasts, more. I gave you the order as I wonder if it is a placement issue at the bottom that is causing this problem. If I press the songs or more button it crashes out of the music menu. I can still play my playlists and podcasts without any problem. I went to the Apple store and they are all but useless as usual. I wonder who else is having this issue.

Big Problem with Directx 11 and Games scaling when lower than native resolution

Hi Guys,
MY system is Windows 7 Home Premium (Korean version), and I have dual GPUs, Nvidia Geforce GT 630m for gaming, and Intel HD Graphics 4000 for all other display matters. My native resolution is 1920 x 1080.
This problem wasn't there couple of years back, but from 2~3 years ago, when I play recent games that require/favour directx 11 (such as Assassin's Creed IV Black Flag, Batman: Arkham Origins), it seems when I use lower than native resolution (such as 1280
x 720) and select fullscreen, giant ugly black borders always appear around the game, and the game does not fill the whole screen.
I thought this was something which could be fixed in my GPU's control panel, but there was no scale fullscreen option under Nvidia's control panel. So I went into Intel HD Graphics control panel, but there was no Scale fullscreen option there either (under
native resolution. With lower resolution there was).
Anyway, after months and months of searching, I finally found an Intel forum which was discussing the same situation:
https://communities.intel.com/thread/44539
While going through the forum, I found out from other users that problem is not with GPU's drivers, but with Directx 11.
To test this theory, I put Batman: Arkham Origins in Force Directx 9 mode, and changed the game resolution to 1280x720. And the game showed no black borders, it scaled up perfectly to fullscreen under Directx 9 (so no problem whatsoever under directx
9). I changed the setting to Directx 11, and the ugly black borders appeared again.
Could someone please help with this? I know I can change my screen's resolution every time I play the game, but it's a real nuisance to do that. And more games are utilising Directx 11 or higher, and I don't think there are many games where I can
force Directx 9 mode like I did for Arkham Origins.
Or if someone connected could contact the people working on Directx 11 and ask about this issue (and get them to contact me through my email below), that would be much appreciated.
my email:
[email protected]
p.s. : all my GPU drivers are currently up to date, and the black borders issue is still there

Hello MeipoXu
While yes, at first people on the Intel forum thought it was the display driver problem (hence the question was originally posted on the Intel forum). But if you look closely through the pages especially Pages 2 onwards, there are some very astute
comments by some posters:
Update to black borders problem: The problem is DirectX11. Fx. Company of Heroes has a setting "Shader Quality" that when set to ULTRA it will run directX11 and when set below ULTRA it will run directX9. So the intel graphics driver is not
responsible! It is Microsofts DirectX11 that does it - maybe only to computers with both Intel HD and a second graphics card for video games
Different workarounds to the black border problem:
Change resolution before running fullscreen
Use directX9 instead of directX11
Fx. in CoH2 there is a setting fx. 50% of resolution, so even in native resolution the graphics is only half and thus faster
Try window mode without borders
and here's also another:
I can confirm that this problem still seems to exist, and that it definitely seems to be related to DirectX 11.
In a variety of games, turning DirectX11 off (either in-game or using ini files in some games that don't present you with the choice) fixes the issue. But this is obviously not ideal.
I have a laptop with a native resolution of 1920x1080, but tend to run games at 1280x720 because it provides much better performance on my HD 4400 graphics chip. This bug and the memory leak issue on Windows 8.1 are extremely annoying.
Like the first poster, my PC has intel HD GPU, and a second graphics card for games (Nvidia).
And all the members have mentioned that they updated the intel graphics driver, but it does not fix it - so it doesn't seem like a graphics driver problem (and more to do with Directx 11).
And they are right. With Batman Arkham Origins, if I set the resolution to 1366 x 768 and apply fullscreen, under Directx 11, ugly black borders appears. Luckily Arkham Origins has "Force Directx 9 mode" which I use, but a lot of games
don't have this mode (such as ACIV Black Flag, Watch Dogs, Sleeping Dogs etc) - you either play in ugly black borders, or can't play the game at all.
And all my Graphics Drivers are currently up-to-date, and issue still exists, so I don't think it's the driver problem.
I have already tried that registry method you just mentioned. It didn't work.
As for Directx 12, well I just hope it works better than Directx 11 (with its ugly black borders in games) does, and works well like Directx9 (with no problem in scaling).

Big problem with Nokia E60 and EAP-PEAP connection

Similar Messages

Maybe you are looking for