Big problem with USB mic in on headset
I have a USB logitech 250 headset which I use on both windows (2Kserver & XP) and Mac OSX. The headset works fine on both PCs but I get wierd input readings on the Mac (G5). At first the input is OK and works fine but once you ask it to do something such as make a voice recording in Audion or Garageband or use it in Skype, after about 10-30 seconds it seems to crash. Then it sounds like it samples the first half second of any input after that via the microphone and loops it over and over again until the headset is unplugged. I can't hear it live through the speakers or headphones but I can see it happening on the microphone input levels in system preferences and can record it in any audio software. I've tried it in every usb port and it makes no difference.
Please help, Ilah
I have this exact same problem, except I am trying to get the headset (a Logitech Premium USB Headset 350) to work with Teamspeex. I've tried two other headsets as well to no avail.
The behavior is the same, seems to be working fine using the input levels in the Sound Preferences as a guide, when I startup the audio application, the inputs locks up and seems to only have a split second of audio which it sends over and over again. Such that if I say "Test" it will result in "TesTesTesTesTesTesTes" and the input levels in the Sound Preferences shows the same thing over and over too.
I plugged this same headset into PowerBook G4 and it works flawlessly with the same software, no problems what-so-ever.
Would love to hear if you found a solution.
Similar Messages
-
How can I get and install an older USB driver to fix the problems I'm having in 10.4.11?
this could help alternatively:
http://discussions.apple.com/thread.jspa?messageID=7514545#7514545 -
MSi Dragon Editon 2 problems booting with usb mice
Hi to all people. I have a problem with my laptop. If i update my BIOS with versions newer tan E1763IMS.50V the laptop doesn´t boot with usb mice connected. I think i answer this in the past but with not solution and now i ask again thinking some people have a solution now.I have checked with differents EC versions and BIOS E1763IMS.50V and with all versions works fine. If i update the BIOS E1763IMS.50V with other newer BIOS the problem appears. When the pc is started and Windows 8.1 is charged i can connect the mouse and works fine too. I have checked with various mices and with all the problem appears. The only BIOS that works fine is E1763IMS.50V.
Thanks a lot for your helpI borrowed a GT70, plugged my SteelSeries Rival optical mouse and flashed with the same 50V version to the laptop. It boots & works normally.
And then I flashed to 518 version. It still boots & works normally.
So maybe your problem is not on the mouse?
Did it boot up if unplugging the mouse? -
Having big problems with Creative Zen Micro Photo!! I need much urgent help!
Hi. I am having a big problem with my MP3 Creative Zen Micro Photo device at the computer.Here is the thing:Before I bought this I had the regular Zen Micro & having fun with it. I had no problems with that when I used the Media Explorer to transfer songs. So I bought the Zen Micro Photo & installed it my computer. As normal I used the Media Explorer to transfer songs & pictures.So I reinstalled Windows XP at my computer, and when I installed the CD that followed to transfer new songs, the Windows said that it's an unknown thing I have connected in the USB.So I installed Service Pack & 2. I have tried to install drivers from the cd but it seems that there are no drivers on the cd! The big problem is that when I connect the MP3 to the computer, it doesn't read it's a Zen Micro, it's just unknown! So the Zen Micro Photo Media Explorer program doesn't work & I can't transfer songs or picture on it! And it just happened after I re-installed Windows on my computer. The same thing happened on my brother's computer after he re-installed windows. And when I connect the MP3 to the USB, it says that it's not a USB 2.0, but .! And I am sure it is 2.0 because it has always been like that before I re-installed windows. Also the MP3 does not re-charge when I put it my computer! The battery is just the same, it tries to do it but it doesn't. So I am using my sisters computer to charge the MP3 & transfer songs. I have tried everything but I can't seem to understand what the problem is? I have never experienced something like this before, and I really hope you can help me with this! To be honest I think what I am missing is the driver. So can someone PLEASE provide me the link for the driver? I have downloaded all those 3 on www.creative.com, but they are none of them! Also that playforsure firmawre thingy does not work because it sais that I have to connect my MP3, and it is connected already!Please reply as quick as possible! Thanks a lot for you kind help!
I have also sent this mail to creative support! But please help me I have had this problem for almost 2 months now! =(Message Edited by anakwalajinn on 05-0-2006 08:47 PMMight try this:? http://forums.creative.com/creativel...mp=true#M95059
-
I'm having a rather big problem with my wired Mighty Mouse. Basically, the middle button is the only top button that works, and clicking with the left or right side does nothing but activate the middle button instead.
Here's the nitty gritty...
The reason I can assume this happening is because I cleaned the scroll wheel to un-stick it. I did this by getting a sheet of white paper, turning the mouse upside down, and rubbing the wheel all over the paper, which left paths of dirt and fluff everywhere. Worked great, and the scroll wheel now works perfectly again.
The mouse worked fine after that which is what makes this problem odd, but later that night, all the top buttons just started acting as one middle button... So, (using my tablet) I changed the setting for the middle mouse button in the preferences to 'Primary Button'.
Now basically what I have is a one button mouse (with side squeezy things).
How do I make the left and right buttons work again? The preferences are set up fine... as in the right side is assigned to 'Secondary Button', etc, but it still only works as middle mouse.
Any ideas or help would be really appreciated!
Cheers
CubyIf you are going to replace it, consider getting a plain old optical mouse that uses Apple's built-in generic USB mouse driver. I like the ones from Microsoft that have two buttons, a clickable scroll wheels, and that's it. This is the one that I use now.
[Microsoft Optical Mouse (Blue)|http://www.amazon.com/Microsoft-K81-00004-Optical-Mouse-Blue/dp/B000068M P2/ref=sr11?ie=UTF8&s=electronics&qid=1244701238&sr=8-1]
It is reliable, comfortable, and sturdy. I've never cleaned it. And it's so cheap. I had a different basic Microsoft mouse before, and the only reason I got a new one was because I wore out the pads on the bottom that let it slide around.
Tip: Apple's generic USB mouse driver does not seem to have way to set the center button click. But if you set it to something when the Mighty Mouse is connected, that setting seems to continue to work with the generic mouse. Mine is set to do Exposé.
Not sure why you cannot do +reset PRAM+. If your internal speaker volume setting is muted so that you do not hear the startup sound, you need to turn up the volume a bit. The startup sound is your indicator (when you hear it for the second time) that you can let go of then four keys. -
Problem with audio/mic combo jack on MS GS70 Stealth Pro
Hello, i have a problem with the mic/audio plug, when i plug my mic/headphones (Razer Electra / iPhone headset / HTC Headset) in to the plug, i get sound from the headphones, but the mic isn't recognized, i've tried uninstalling the drivers and installing them again, nothing works. Please, help me
Quote from: Mirri;113498
Aaand problem still exists. It just turns out that my laptop mic has taken over from the mic port for some reason. Not sure why it won't recognize that anything is plugged in in the mixer despite stating in the little task bar window that an audio device was plugged in whenever I do it.
Try to use the 4 pin to 3 pin headphone adapter and see if the problem still remains.
Quote
Try to use the 4 pin to 3 pin headphone adapter.
http://www.msi.com/faq/nb-1094.html -
Hi
I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
What can I do?
thank you a lot.There is no product called Adobe Acrobat Reader Pro. There is
- Adobe Acrobat Pro ($$)
- Adobe Reader (free)
Which do you have? And are you a programmer? -
K7N2 deltas mainboards have a problem with usb devices ??
Ok here is my problem..
I had installed WinXP Pro with SP1..
I got a 20 GB USB2.0 disk.i connected it on the both front or rear usb ports.
When i tried to transfer files to my usb disk or to my PC, in the middle of the copying, i got "Write Delay Failed" error and lost my usb connection..
I had to plug it out and in again..
Now, i have an DSL modem..Last night, i was disconnected from internet and my modem's lights gone..I plug it again, no lights..restarted my PC, also completely shutdown Windows XP..Again no lights..
Then, formatted PC and installed windows 2000 Pr and SP4, until now, my modem worked fine..But USB 2.0 ports are still no use for my usb disk...
In bios , it's enabled as USB 1.1+2.0..
I think this K7N2 deltas have a problem with usb 2.0 devices and Win XP Pro..
Some guys talking about, removing 9th wire earth, but couldn't understand which wire from where ? From mainboard or from usd device's cable ?
Those cables are fabricated, i think it's impossible ?
My processor is Athlon 2500+, ram Twinmos 512 DDR 400
Thanks for replyI'm also having this problem. It's happening with my USB flash disk. I was almost buying another one when I tried it with Windows Vista on the same machine and it worked ok, then I tried Arch Linux (with kernel 2.6.30.5) on another machine and got the same error. After that I tried Ubuntu and it worked ok. Seems that Arch's kernel doesn't like my USB flash disk.
Last edited by esdrasbeleza (2009-09-02 01:16:09) -
Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?
when I launch Photoshop CC, I get an error message
and what exactly is the text of that error message? -
My iphone 4s crashes too much when i download and app from store and open it its freeze or crash and restart the phone i think i am having big problem with this device i restored it to factory settings and no waay!
I think many of us need a Defense Against the Podcasts App professor.
Have you looked at this Apple support page?
http://support.apple.com/kb/HT6190?viewlocale=en_US&locale=en_US -
I am no longer being asked for a password when downloading an app, big problem with kids
I am no longer being asked for a password when downloading an app or music in iTunes, big problem with kids. How do I enable
To elaborate further, in those restrictions you can specify exactly what types of actions you would like to restrict.
I think you'll find this accomplishes your objective. -
I have big problems with mountain lion. you can not have a boot disk system I resulted in the need to re-download the os from scratch impiegandoci 8 hours, it is outrageous even with windows 95.
at least that the operator has confirmed to me that he called me. I also have problems with either the start of the mac with the power off. I can not understand if it crashes or is just very very slow.
Finally, I have a problem with the external hard disck. I often said to have been ejected incorrectly (not true) and I start to restore the startup recovery disk because disk utility is ineffective from the normal operating system .. is a shocking thing, but how you reduced. in four years it had never happened. seem to have windows or worse. Wake up.
I am an Italian, alas, and then I would like an answer to my language because my € are the same as German French or English.You are on Windows 2000, you do not have a "Firefox" button, and should consider yourself to be fortunate in that you still have menus and don't have to do anything to get the menus back instead of the "Firefox" button. (The same applies to Windows XP users).
Use the "File" menu to get to Import. You are not on Windows 7 or Vista, and don't have to put up with the nonsense added for Aero.
If you want the "Firefox" button you can get it with View -> toolbars -> (uncheck) Menu Bar. The menu bar and the "Firefox" button were supposed to be mutually exclusive (which is impossible in some cases without being incompatible).
Once you are using the "Firefox" button ...
Use the "Alt" key to view the menu bar (temporarily) containing File, Edit, View, History, Bookmarks, Tools, and Help. On Windows 7 and Vista, the menu bar was hidden by default in Firefox 4 and above. These menu items are more or less available under the "Firefox" button which has the most used of the built-in Firefox menu items available in a different format.
To get back to having menus again. "Firefox" button -> Options (second column) -> (check) Menu Bar
You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface -
Helloo! I have super big problem with my Air.
Helloo! I have super big problem with my Air,10.8.5 ,it asks every 10 sec to make some changes and asks me for password all the time!! I cant acces my documesnt,pics,music,NOTHING at all! Finder is not working,i cant open any folder,icons are missing also,i cant open any of them,mozzila,chrome..im really going crazy.. i updated tonight my phone on new IOS 7 through my comp,cant be that i messed up everything because of that..this comp.is like 10 days old.
btw. i created new user,and everything is working ok.Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line on this page to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
Hi, I've a big problem with iPhoto (and Aperture too, but I'll say later).
Two days ago I was creating a small slideshow (18 pictures) and everything was fine. Suddenly, while I was looking for a theme, switching between 3 of them, iPhoto stopped to work. No ESC, no key, I had to restart my iMac, turning it off.
From this moment every slideshow I select, iPhoto stop to work and need a force quit. So I restored a library, from Time machine, but nothing changed.
So I bought Aperture, but nothing changed, using iPhoto Library.
Now I've created an Aperture Library, importing in it my old iPhoto Library. Is there any way to "clean" iPhoto, reinstalling it from new? Do I need such a action?
Thank you and best regards.That means that there is something in your account that's the culprit. First try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE 1: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
If that fails it might be another preference file that's causing the problem. Here's how to test for that:
Trouble Shooting Preferences
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
1 - close all applications.
2 - open your Home/Library folder and Option-drag (copy) the Preferences folder to the Desktop.
3 - select the contents of your Home/Library/Preferences folder and drag them into the Trash bin in the Dock. You will be asked to provide your Admin password.
4 - reboot.
5 - run the application again and determine if the problems is fixed
6 - If the problem is fixed:
A - open the working Home/Library/Preferences folder.
B - Open the Preferences folder on the Desktop, select all of the contents and drag them into the working Home/Library/Preferences folder.
C - When the Copy window pops up check the "Apply to All" check box and then click on the Don't Replace or Skip button.
D - reboot.
7 - If the problem is NOT fixed, drag the contents of the Preference folder on the Desktop into the Home/Library/Preference folder and replace the entire contents that were created by clicking on Replace.
8 - reboot.
OT -
Problem with usb boot on Satellite A-50
Hi,
I've had a problem with usb boot. When I'm inserting a usb, I can't boot my computer from usb. I've selected the option boot from a disk, but doesn't runs. I have a "Satellite A-50-522". Do I need to update bios?
Greetings,Hello,
you sould try to press F12 when the Toshiba screen appears! Then a small boot menu is shown. Choose USB-FDD and then it should work.
Bye campino
Maybe you are looking for
-
The application called VirusScan that comes preloaded on the macbook will no longer open, claiming that it is corrupt and that I must reinstall it. After looking in the app store it does not appear that said application is available for re-downloadi
-
Enterprise Manager Host Credentials Problem on Windows Vista
I have similar problem as discribed here before, but the difference is, that I am using Windows Vista and I have tried "Log as a batch job" and "Log as a service" privilleges. It does not help. I have Oracle Personal Edition 10.2.0.3 on Windows Vista
-
Hi! Simple question - I think. I'm attempting to insert several photos into one shape in InDesign CS4. I'm sure it's something really simple but I'm just not figuring it out. Please help!! Thanks in advance!
-
Thank you, I hope it will be soon available... Regards, Daniel ----- Original Message ----- From: "James, Nick CWT-MSP" <njamesCarlson.com> To: "'Daniel González de Lucas'" <danieleam.es> Sent: Friday, November 03, 2000 1:48 PM Subject: RE: (forte-us
-
Hi, In IQ09 we will give Status Included and Status Excluded . In what table that status is storing ? that status belongs to serial number. Bye, Satya.