Billing block for a sales document

hi
how can we assign automatic billing block for a particular sales document.
Thank you

Hi srinivas
go to  VOV8 ,  and assign to that particular sales document type., in the billing tab automatically it will affect in the sales order for that sales documents. but if you  want to go only for a particular sales document you have to either enter manually and save it
bcoz if you assign to a particular sales doc  type , it will block all sales documents created with that sales doc  type and it will affect the other modules also.
if the billing block has to be triggered automatically , in your sales order without affecting your sales doc type then you need to use USER EXITS
reward if useful
Regards
Srinath

Similar Messages

  • Remove billing block on a sales document in background

    Hi
    I have a sales document (a credit memo request) for which we need to remove the billing block. when we are trying to remove the billing block via V.23, the system times out as the document is very big. I tried running v.23 in background but this does not work. I think, as V.23 produces an additional screen where we have to select the document and hit on "delete billing block" button, this was not working in background.
    Is there any other way to remove the block other than BDC???

    Hi,
    Try using program RVAUFSPE. maintain a variant and set it up for background processing.
    Hope  this helps you..
    Satish

  • Billing problem for cash sales document

    Hi all ,
    Greetings
    we are customizing for cash sales. Required Three configuration setting are done for sales document i.e
    1. Shipping condition Immediatly
    2. Lead Time 0
    3. Immediate delivery must be switch on
    and order and delivery is done at the same time while creating the order. But while creating the billing for that order through vf01(billing type BV),  We are getting an error "DOCUMENT DOES NOT CONTAINS ANY ITEM WITH OPEN QUANTITIES".
    For the order, Output Type is RD03
    can any one help on this?
    Regards,
    Pramod

    Hello Pramod,
    In the copy controls from order to billing VTFA - check for the item category BVN - the billing quantity should be marked sa "A".
    Also check in the VOV7 for item category BVN - the illing relevance should be "B".
    Let me know if it works.
    Thanks
    Shobhit

  • Setting up multiple billing blocks for a CMR - Credit Memo Request

    I am trying to set a billing block for a credit memo request.  The item category in VOV7 configuration only allows you to set one.  I need to be able to set any of them and for it to block.  If we do not use one; the system allows the credit memo to get created.  If we choose the one that we configured in VOV7 it allows us to only use that one.  The client needs to be able to select any billing block from the drop down when creating a credit memo request in VA01 instead of just one specific one.  Is this possible?  If so, where would I do this?

    Surprising! when a billing block is applied in the sales document, then the system will NOT allow to create the billing document(in your case credit memo). Can you check in t.code OVV3, the billing blocks are assigned to billing types? After assigning, create a new document and test. The path is SPRO->Sales and distribution -> billing->billing documents ->define blocking reasons for billing->assign blocking reasons to billing types.
    Regards,

  • Billing block for invoices and credit notes on Sold-tou00B4s level

    Hi All
    can we have billing block for invoices and credit notes on Sold-to´s level.
    please advice.
    Thanks
    Tushar

    Hi
    The bellow way at document level.
    One more way to maintian the billing block in the functionality of sales document types in VOV8
    In VOV8 , Maintain proper value in billing block field.
    So that , when you create the order or credit memo request system automatically pick the billing block.
    Once remove the block of billling then only system allow to create the billing or credit memo.
    Thanks,
    KP
    Edited by: phanik2503 on Mar 2, 2010 6:46 AM

  • How to capture Ord-related bill.st. in a sales document item

    Hi Experts,
    Just want to know how will i able to capture the value of the Ord-related bill.st. in a sales document item.
    Here's to give you example.
    - Go to VA03 and type in a credit memo req.
    - Double click on first item material.
    - Go to "Status" tab and you will see the "Ord-related bill.st. under Processing status.
    I want to capture the value found to this and display it in my report but I have no idea what table maintain this.
    Hope you can help me with this ASAP... Sorry for the rush..
    Regards,
    Yu

    Hi Both,
    Thanks for this! I already saw this one but I'm doubting at first if this is correct.
    Nevertheless, thanks for all your answer. =)
    Appreciate your help! =)
    Regards,
    Yu
    Edited by: Aura Yu on Sep 16, 2010 12:37 PM

  • How I can get the Billing Type for the sales order and its items

    How I can get the Billing Type for the sales order and its items. I mean from which SAP tables and how?

    Hi,
    You need to use two tables.
    First use VBFA. Enter the sales order number in the field Predecessar and the value M in SubCt field. This will give all the billing document number for the sales order items.
    Then use the billing document numbers in table VBRK, where in you can get the billing document type.
    Regards,

  • User-Exit for changing Sales Document Number - Urgent

    Hi Experts ,
                     Please suggest me the <b>User Exit for changing Sales Document Number.</b>
    thanks,
    Jayesh<b></b>

    hi jayesh,
    chech this exit-----EXIT_SAPFV45S_002.
    this exit's description says " Change Sales Document Using Configuration".
    Other available exits are
    SDAPO001            Activating Sourcing Subitem Quantity Propagation
    SDTRM001            Reschedule schedule lines without a new ATP check
    V45A0001            Determine alternative materials for product selection
    V45A0002            Predefine sold-to party in sales document
    V45A0003            Collector for customer function modulpool MV45A
    V45A0004            Copy packing proposal
    V45E0001            Update the purchase order from the sales order
    V45E0002            Data transfer in procurement elements (PRreq., assembly)
    V45L0001            SD component supplier processing (customer enhancements)
    V45P0001            SD customer function for cross-company code sales
    V45S0001            Update sales document from configuration
    V45S0003            MRP-relevance for incomplete configuration
    V45S0004            Effectivity type in sales order
    V45W0001            SD Service Management: Forward Contract Data to Item
    V46H0001            SD Customer functions for resource-related billing
    V60F0001            SD Billing plan (customer enhancement) diff. to billing plan
    Enter these exits name in SMOD transaction and select components. u can find all the user exits available for this exit name.
    Reward me if useful..........
    Harimanjesh AN

  • How can I get the correct Ship To (KNVP-KUNNR2) for a Sales Document?

    I am trying to generate a report that will (among other things) display the Ship To ID and Name for a given Sales Document.  I know the following information:
    VBAK-VBELN - Sales Document
    VBAK-VKORG - Sales Org
    VBAK-VTWEG - Distribution Channel
    VBAK-SPART - Division
    VBAK-KUNNR - Sold To Party
    I know that the table KNVP will return a list of Ship-To Customer numbers (KUNNR2) for a Sold-To Customer (VBAK-KUNNR) if I also filter by VKORG, VTWEG, and SPART (using SE16N).  What I don't know is which one of the returned values is being used in a particular Sales Document.  The customer in question has 29 Ship-To locations.  How do I find out which Partner Counter (KNVP-PARZA) the Sales Document uses? I don't know where that value would come from.  Once I can get the correct Ship-To Customer Number, I should be able to search the table KNA1 by WHERE KUNNR = KNVP-KUNNR2 and return KNA1-NAME1 for the Name of the Ship-To location.

    For a sales document?  Use VBPA with PARVW = 'WE'.  Also, use the ADRDA field to determine whether the address on the document has been manually changed.  In any case, you can use one of the many address management functions or just ADRC directly to get the name, address, etc., using the ADRNR field from VBPA or if the address is from the customer master, KNA1.

  • Error in e-commerece The text for the sales document TA RU lacking in langu

    Hi GUYS,
    I am having a e commerce scenario.
    I have done all the settings related to it. When I login with a user in EN language, and try creating a sales order ,I am able to create in e commerce.
    I have created another user with login in russian language.When I try to create a order in front end I am getting the error:
    The text for the sales document TA RU lacking in language.
    Please suggest if I have to maintain any setting specific to RU language in R/3.
    Thanks and regards,
    Nilesh

    Hi
    Please maintain the language for that sales document type using the following path...
    IMG(SPRO) - Sales and Distribution - Sales - Sales Documents - Sales Document Header - Convert Language for each Sales document type - execute and maintain the entries using 'New Entries' tab.
    Thanks,
    Ravi

  • Printing PO error "Maintain billing plan type in sales document type...

    Hi,
    I am trying to print SAPscript to pdf using ADOBE_ENTRY_NEU routine and when i try to display output from ME9F, i get an error that says "Maintain billing plan type in sales document type or Item Category"
    anyone have any clue why this is happening?

    As this is about SAPscript, moved it to ABAP Programming forum

  • Remove Billing Block on a Sales line item with Billing Plan

    Hi All,
    I need to remove/clear “<b>Billing Block</b>” on a sales order line item which as been attached to billing plan. Sales order line item can have more then one “<b>Billing Plan</b>” line item. Based on <b>billing date</b> I want to remove Billing block. Any hints or direction much appreciated. Thanks in advance.
    Kind Regards,
    Tim

    Hi,
    Use the BAPI BAPI_SALESORDER_CHANGE to remove the billing block in the sales order line item..
    Pass the item number ORDER_ITEM_IN parameter
    Pass the item number, UPDATEFLAG = 'U', BILL_BLOCK = 'X' in the ORDER_ITEM_INX parameter..
    Thanks,
    Naren

  • How is a Billing Block on a Sales Order manually removed?

    Hi friends,
    I want to know,How is a Billing Block triggered on Sales Order due to pricing intolerances is manually removed,even if the intolerances are not corrected.
    Regards,
    Imran.

    u have to check ur config setttings , it depends ?
    Regards
    Peram

  • Common Features for all SAles Documents

    Hi gurus,
                I like to share a piece of information regarding the common features for all Sales Documents;
    They are
    !) The incompletion Log
    2) Fast Change Option..
    Any new views can be discussed for the above.
    Regards,
    Sarosh

    Hi refer the link it may help u out
    http://72.14.235.104/search?q=cache:p6G8tXimQ2UJ:homepages.wmich.edu/~s4senapt/bus%2520project%25204.htmSAPSDcommonfeaturesforallSalesDocuments&hl=en&ct=clnk&cd=16
    Message was edited by:
            SHESAGIRI GEDILA

  • Billing block for customer for sales document type OR

    Hi
    I want to block a customer for a particular sales document type OR
    How to do it?
    Regards

    Hi Nikhil
    There is a field called "Check Partner Auth.", but it is necessary to create the order from a contract. This field is in sales document customizing VOV8.
    SAP Documentation:
    Check partner authorizations
    This check determines whether a partner is authorized to release against a contract.
    Procedure
    Here you can specify whether the check is to be performed against the partners in the contract or the partners in the customer hierarchy. If you do not want the check to be performed, leave the field blank.
    When you create a release order for a contract, the system determines whether a partner is authorized to release against the contract. The check is performed at header level. Depending on the rule you enter in this field, the system checks against one of the following:
    Partners in the contract
    If the partner has the partner function AG (sold-to party) or AA (sold-to party authorized to release) in the contract, the system accepts the partner as the sold-to party for the release order.
    Partners in the hierarchy
    If the sold-to party of the contract is at a higher level in the customer hierarchy to the partner who wants to release against the contract, the system accepts the partner as the sold-to party for the release order.
    Note
    If you create a contract with reference to another contract, the system does not run a check and it copies all the partners created in the target contract. If you do not want it to do this, use copying control in Customizing to change it.
    Regards.
    Mikel

Maybe you are looking for

  • Can I install 'Cisco connect' software on more than one PC in the network?

    Can I install 'Cisco connect' software on more than one PC in the network? Do multiple installs conflict? Who did try this before?

  • Create physical table using select in repository

    Hi Gurus, Can we create Physical table in OBIEE 11.1.1.6 repository using stored procedure and select? How is the right syntax? Thank you so much JOE

  • Why does Safari become unresponsive when more than 20 windows are open

    Does 3.0.3 fix this? It is extremely annoying to wait for the beachball for minutes on end after a certain number of windows( 15 to 25) are open. You can't open a new one , you can't close old ones, you can't scroll, you can't use the back arrow, you

  • Export settings for HD-quality video

    I'm using Quicktime Pro 7.6.4 I'm trying to create a short time-lapse video from stills from a DSLR. What should my export settings be to create a video at HD quality? Being a still photographer I had originally assumed that the image size was the ma

  • Xquery: Connection refused error

    Hi, I am trying to use XQuery to set a variable with the value from an XML Message. However when I test any simple XQuery expression in the map dialog I get the following error message: Exception occurred executing XQuery: Connection refused I am usi