Billing Type is not picked up in Intercompany Invoice

Hi,
The scenario is Intercompany STO. Here the flow is Purchase Order-Outbound Delivery- Invoice. No sales order.
I have two billing types, proforma invoice and Intercompany invoice. Both are copy of standard types.
I have maintained copy control for both of the invoices.The flow is working fine. But there is a issue.
The issue is while creating billing, I have to manually pick the billing type.( i.e. ZIV, copy of IV). If I don't select the billing type, I get a error " Billing type ZNLC can not be invoiced with billing type IV" (Here, ZNLC is my delivery type, copy of NLCC).Its not picking the correct billing type(ZIV).
I can't understand where this reference to IV is made. I have deleted the copy control from ZNLC to IV as it is not required.
As per my knowledge, the reference billing document is picked through copy controls and sales document settings. (VOV8)
Even I have checked item category. Is there any other settings?
Could someone suggest what is the cause for this error and how to rectify it?
Thanks and Regards,
Pathanjali Bhat

Hi Bhat,
After ur explanation wat i understand is you did the configuration i.e copy control ZNLC ---> ZIV and also u did with proforma Invoice i.e u did the copy control with 2 types of invoices .
I think so , because of that reason system is not able pick the sutable document type
Delete one copy control which is not required.. and try it.
If it will work let me know..
Reward if it is useful.
regards
Durga Prasad

Similar Messages

Billing type is not updating in COPA table

HI Gurus
Billing type is not updating for few billing documents in ECC COPA table CE11000 but for few documents billing type is updating correctly in ECC COPA table CE1100
Example 1 for billing document 10351144 billing type is not updating in ECC COPA table CE11000 billing type ZDN
Example 2 for billing document 10354965 billing type is updating in ECC COPA table CE11000
Billing type is same for the both billing documents but its updating for one document and it is not updating for another document
Please help me to find out the rout cause

hi, can your replay the problem in your system?
if so , I suggest you to set a user breakpoint in ERP function BAPI_ACC_DOCUMENT_POST, (the user need to use the Middleware user not your foreground login user)
And when billing document inbound to ERP, SAP will call the function. then you can check if the CO-PA fields has been filled correctly or not.

Order type is not picking while converison Plnd to process order

Dear Dudes,
i have maintained production scheduling profile in all material masters in which order type is specified. while converting planned order to process order order type is not picking.
thanks in advance.

Robert,
Since you are using same order type for both MTS & MTO, you can define this order type "PI01" in the MRP plant parameters using transaction OPPQ in the Conversion of Planned order section.
I am not sure, why production scheduling profile is not working for you, hope you are using the Production scheduling profile configured using CORY transaction check this part alone.
Regards,
Prasobh

Billing type is not populating table TVARVC

Hi Expert
My billing type is not populating the TVARVC table can any body explain whats needs to be done.
Regards
Sanjay

Hi Sanjay,
There is no such field in the table "TVARVC".I think you may be thinking that type field is for billing type.
It is not billing type.It is Selection category type.It has two values "S" and "P".
S means selection and P means Parameter.
So your billing type will not populate at all.
Hope this helps you.
Regards,
Krishna.

Billing type F2 not defined error vf 007

in Billing transaction this error happend
Billing type F2 not defined error Vf 007
and the billing type f2 is deleted from the system and it's not assigned in the sales order type
why the system determined billing type F2 for this sales order ??

you mean delivery relevant billing field is blank in transaction code VOV8 for your sales doc type?
if that's the case..I think system always defaults F2 for invoices, based on some parameters like sales doc type, screen sequence group etc..
Regards,
Raghu.

Error Log: The Billing Type Could Not Be Determined

Hi Experts
I have to produce the credit note sebsequent to the return. But I am getting the "Error Log: 0084001006 0000 The billing type could not be determined". Kindly help me with the solutions
Thanks and Regards
M.Dheerendar Jain

Hi,
Please check copy control VTFL for delivery and billing type
go through the routine 350 (VAT Determination) whteher it is applied in ite category.
if yes, then you have to configure the VAT Invoice type determination.
also maintain the entries in below tables:-
J_1IDCLSDET & J_1IBILDET
Even if the above entries are already maintained then check the supplying and receiving plant entries
for the billing.
To maintain entries in table go to t-code SM30.
and put the above table in the "Table/View" it helps to determine FVAT Invoice types
Invoice types determined based on supplying and receiving plant.
Kinldy check and confirm.
Thanks & Regards,
Rahul Verulkar

The billing type could not be determined" .

Hi All,
When i am excuting bap BAPI_BILLINGDOC_CREATEMULTIPLE i by passing ref_doc its giving error that "The billing type could not be determined" .
Is i have to pass something else.
Regards,

Can you tell how did you resolve this?
I'm getting the same situation and have no idea
Thanks in advance.

Billing type ZF2 contains split crit. , n invoiced: 123456789, invoice notr

Hi All,
I am getting the following error at the time of doing billing,VF01....Help to resolve the same....
*Error: Billing type ZF2 contains split crit. , n invoiced: 123456789, invoice not req.*
Rgds,
Pavan.

Check for the line item what is the item category you got. and then check in VTFL whether that item category is available or not. If it is not available then maintain the item category in VTFL. Also check in VOV7 for that item category whether relevant for billing has been maintained or not.
You might be aware of Invoice split takes place because of the following criteria
1) Payment terms
2) Payer
3) Billing date
4) Foreign trade data
5) Account assignment grp of MMR
You might have maintained some group data in the sales order bcoz of that this is taking place.
So check in the sales order whether all are same or not. for the two line items you had created in the sales order.
Note : Check the copy control VTFL(if it is delv related billing or VTFA for order related billing) , whether invoice split 001 has been maintained or not.
Hope it can assist you.
Thanks & Regards
JP

Billing type does not exist in application CRMB

Dear all,
I am trying to invoice a service confirmation and the corresponding entry is not found in billing due list. When I analyse the missing entry in /n/bea/crmb04, System is throwing an error that corresponding billing type and itemcategory are not avialable in CRMB application.
However, I have created the new billing types and item categories in CRMB only. Do I need to generate any billing engine after creation of this? If yes how to do it.
Regards,
Rajesh

closing as no responses are there

Exchange rate type M not picked in FB60 foreign currency entry

Hi
My local currency is   USD. I   have defined exchange rate for   ' USD and EUR   '    for exchange     type M and type EURX.
In FB60, system picks the exchange rate defined for exc. type EURX,   but   I   want it to pick exch. type M.
Also i   have set   exch type M in docu type KR.   Still it does not pick   exc type M.
Pl advise
Thanks
kamala

I am thinking that most likely you have specified EURX as Alt. ERT (alternate exchange rate type) for exchange rate type M for the currency pair USD:EUR in IMG node 'Define Translation Ratios for Currency Translation" (T Code OBBS). Remove it and retest FB60; it should pick the M rate.

Condition Type JSRT not picking Condition Base Value in Pricing Procedure

Hi Friends,
In a procedure System is not picking condition base value for condition type JSRT. I have checked the tax procedure and found alternative Cal Type is 17 and is working fine for Domestic vendors.
Friends i need your help in sorting out this issue. Pls suggest what I can check in order to sort out this issue.
Rgds, Krishan Raheja

Hello!
In TAXINN the base value for the condition JSRT is picked up from step 100.
I suggest that you change the "From" value to 100 instead of whatever you may be using
Then test the transaction once again.This will not affect your normal service tax calculation either. So please make this change & try using S1 for planned delivery cost.
Hope this helps !
Cheers!
Plauto
Edited by: Plauto Abreu on Feb 11, 2011 9:03 PM

Condition type JEXP not picking in sales order

hi
i was working with all configuration of TAXINN
i am facing with a problem
when i am running mine sales order i am not able to see condition type JEXP(BED) , JEAP (AED)
can i now where i am gng wrong
whereas i can see all the other condition in sales order
but when i enter it manually JEXP it is taking but in again in billing it is not showing
can u plz help me
Regards
Vini

Dear Vini,
Please Check the configuration settings through IMG path
SPRO>IMG>Logistics general-->Tax on Goods movements >India>Basic settings-->Determination of Excise Duty -->Maintain Excise defaults here you check JEXP condition type is maintaining for A/R BED or not if not maintain then try.
Also check the condition record maintanance for the JEXP condition type through VK12 transaction.
I hope this will help you,
Regards,
Murali.
Edited by: Murali Mohan.Tallapaneni on Oct 1, 2008 6:51 AM

Billing type G2 not showing accounting entries

Hi Experts,
I first created a credit memo request (order type-CR) and then issued Credit note (Billing type -G2 Credit Memo).When I clicked on accounting to view accounting entries it says " An accounting document is not required for this Billing document".
There is no posting block etc.
Observations-
1. The net value is showing as "0".
2. PR00 standard condition's value not being calculated (hence net value is "0"). It is behaving like statistical condition.
Is this standard behaviour of this type of billing document? If Yes then why? Why accounting document should not be generated? If No, then please help me understand where I might have missed on correct settings.
Thanks and Regards,
Randhir

Relationship between the credit memo request and the credit memo item posted in Financial Accounting (FI). As soon as you bill the credit memo request together with other sales orders, or distribute the items of one credit memo request to several billing documents, the assignment is no longer valid and the system will not process it.
For credit memos, credit memo requests, and payments, you have the following assignment options:
u2022Assignment to a single invoice
u2022Assignment of a partial amount to an invoice
u2022Assignment to several invoices
When you post credit memos, the payment programmed processes them automatically. If the credit memo is specifically related to a particular open invoice item, the payment program automatically attempts to offset the credit memo against the open item. If it is not possible to completely offset the credit memo against an invoice, you can post a debit memo to the vendor, who is to reimburse the amount. Then you can apply a multilevel dunning program.

Selling Exchange rate type is not picking while billing

Hi,
We have maintained Exchange rate type B for selling and the same was assigned in customer master as well as the RV document type. While raising sale order system is picking the B rate from OB08 table, but at the time of billing system is taking the M rate. Where do i set a control to pickup only B rate? Can anybody help me on this.
govind.

Hi,
Ideally at the time of billing, exchange rate type is picked up from the document type (RV in your case). However if the rate is picked up for standard exchange rate type, check if there is user exit being called for exchange rate type.
Thanks,
Aman

Gross price for BASB Condition is not picking in Purchase Order invoice tab

Hi Gurus
In taxinj -- conditional base column i added 362 and
in pricing procedure for gross price in subtotal column i added 6
but even though when i click invoice tab while creating Purchase Order i am not getting gross price for BASB condition same as gross price in pricing procedure it is picking some different value such as either net value or manual excise from pricing procedure JEXC condition value.
what went wrong.
Rgds
Shrikant Kamat.

Hi Saplearner's
Is there any body who will focus on this issue
I have maintained all this accordingly, but the problem lies over here
Pb00-- 100
ra01--- 2 discount
net-- 98
jexc(16%)--15.68 ( MANUAL EXCISE)
net amount including tax-- 113.68
freight(2%)-- 1.96
Actual-- 115.68.
BASB-- 115.68 ( It should be 100)
In short i have given summary above, now let me explain
when i am giving 100 as gross price,discount-2 and if i dont give JEXC, then BASB is coming 100 that is correct.
when i am giving 100 as gross price, discount 2 and if i give JEXC , then BASB is picking as 115.68.
Problem is here when we give JEXC manual excise.
Rgds
Kamat.
Edited by: shrikant kamat on Feb 16, 2009 2:09 AM
Edited by: shrikant kamat on Feb 16, 2009 2:09 AM
Edited by: shrikant kamat on Feb 16, 2009 2:10 AM
Edited by: shrikant kamat on Feb 16, 2009 11:57 PM

Billing Type is not picked up in Intercompany Invoice

Similar Messages

Maybe you are looking for