Bin search for putaway
Hello, experts!
Could someone give advice on following situation:
1) the storage type (high rack) has put away strategy P- storage unit type, mixed storage is set A- Several homogeneous storage units per bin, the mixed storage has value X - Addition to existing stock permitted.
2) material master has mark Addition to existing stock allowed.
When creating TO to move some returned quantities to stock, system is not searching for bin with existing stock. It adds the quantity to first available bin, where storage unit is allowed.
Is it possible to set system first add to existing stock without using strategy " I ", since mixed storage is not allowed for this strategy?
Thanx in advance!
WBR,
Brucke
Hi Brucke,
It is hard to diagnose without full information however you can try to find out which strategy it is executing by setting a
break point in the include LL03AF0B in the line PERFORM STRATEGIEN. Then try to trace LTAP-VLPLA: Source storage bin when you get into LL03AF1F you will see then the bin search strategy and why was that.
I hope to have helped you.
Best Regards,
Christian Rosa
Similar Messages
-
Hello,
I have storage type X with multiple pallets for material A. I configured SLED picking strategy but I also need to sort the bin search by quantity.
For various reasons there are pallets smaller then the standard size in this storage type (there shouldn't be but... life is life), and I need to ship the standard pallets before the anomalous ones. Is there a standard exit where I can do this? (or a standard way to do this)
Thank youHi Joao,
In Standard we have picking Strategy Strategy A: Partial Quantities First,
you can have a look on that if that is not meeting the requirement then you can write the piece of code in user exit EXIT_SAPLL03A_005,
Please refer solution proposed in one of the existing SCN thread
Using 'Partial Quantities Management Strategy-A' without Storage Unit Management -
Hi all,
Hope you guys can help me out with this issue.
I have 3 level racks and at the 1st level all the bins should allocate a specific material say I have 5 bins and materials A, B, C, D, E, should be placed in there in that order say 1, 2, 3, 4, 5 that means material A cant be placed in bin 2, 3, 4 nor 5 only in bin 1 and material B only in bin 2... and so on
The problem if I use putaway strategy F "Fixed bin" say for material A is that when bin 1 is full, the strategy "turns" to next empty bin, and if bin 2 is available then it will go to bin 2, and this is wrong because in bin 2 there should be only material B
If the "fixed" bin is full the system should go and look for some other bin but in the 2nd or 3rd level not in the first "fixed" level
I can allow addition to stock neither mixed storage, therefore if there is material in one bin no matter if it is full or not (we are checking bin capacity) system should try to find other empty bin
Is there a way to exclude some bins from the putaway search strategy, or to define a range of bins on which the system should look for putaway?
Please advise on how to solve this issue
RegardsI think this can be accomplished by using storage sections
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f839064afa11d182b90000e829fbfe/frameset.htm -
Bin Number for the First Time Putaway
Hi,
At the time of warehouse management go-live, we move tne stock from non-wm stock to wm-stock via tcode MB1B/311, then the system create transfer orders with proposed bin number according to the settings and material master data.
The problem is, for some materials which are not set as "Fix Bin" in the material master, the bin number proposed by the system are not as same as actual ones when we put away the materials at the first time.
So, after WM go-live, what's the best way to keep the actual bin number for each material consistent with actual ones, is there any good ways except stocktaking?
Kindly please advise.
Thanks.Hi, Jürgen,
Thanks a lot.
If so, is it OK to do as follows?
suppose I will acticate warehouse management for the following storage location:
Plant: P001
Storage location: SL01
1) to keep the original stock in the storage location SL01, do not move the stock out to non-WM managed storage location before go alive.
2) transport the WM settings to production system
3) because the warehouse was managed via an external (third-party) warehouse management system before, so I have a detailed list including material, exact bin number and quantity.
So I create transfer orders with movement type 561 according to above list, and this can make the WM stock consistent with IM stock. is it OK to do like this?
Kindly please advise again.
Thanks. -
Hi
I was wondering if someone can help me or improve my understanding plse.
When creating my Transfer order the Storage bin search log is greyed out (unselectable). Meaning I cannot check the sequence in which the system is deriving the putaway bin.
menu > Environment >Stor bin search log (here SAP gives a detailed description how it executes the defined strategy.)
I am using an ID point and handling unit management.
The process
Receipt into the ID point (MT101) then use LT09 create transfer order for storage unit. It is at this point I want to review the storage bin search log. It is unavaible.
Is this related to fact I am using an ID point? If so is there some other mechanism to display how the system has executed its logic? (Rather than going to Spro which users will be unable to access?)
Many thanks,
Adam.Thanks for the response but LT01 is not applicable in this instance. (Create TO)
We are using handling units and I want to put away using the putaway sequence which is still held while using ID points. This is picked up via LT09.
Cheers
AB -
I have a long document and I want to be able to search for certain key words and phrases, and then see how many times they appear in the document and exactly where. How do I conduct this sort of search and viewing? In the past, in Pages and Word, I've been able to view my "finds" in a sidebar but I can't figure out how to activate that service anymore.
Thanks!Here is a word frequency concordance Automator Service that works in both versions of Pages. It does not present a page number reference. It is by descending count, and alphabetically, within the repetitive counts as shown in the image here. In any document, you select the text to process, then Menu > Application Name > Services > Frequency. The Service will open TextEdit with the n-pages of scrollable results. It is 16 pt Helvetica Neue for legibility.
Here is the code:
on run {input, parameters}
try
set mySelection to input as text
set formatted_result to concordance(mySelection)
if formatted_result is not null then
set textHeading to "Word Frequency List"
tell application "TextEdit"
activate
set NewDoc to make new document with properties {name:"Concordance"}
make new paragraph at beginning of text of NewDoc with data textHeading & return
make new paragraph at end of text of NewDoc with data formatted_result
tell text of NewDoc
set font to "Helvetica Neue"
set size to 16
set color of paragraph 1 to {0, 0, 65535}
end tell
end tell
else
display dialog with title ¬
"No input selected" with icon stop ¬
giving up after 15
end if
on error errmsg number errnum
display alert ¬
"AppleScript Error" message errmsg & "[" & errnum & "]" as critical ¬
giving up after 30
end try
return input
end run
on concordance(mySelection)
-- Use Ruby to count word frequency and alphabetically sort words
set rb to ¬
"selected = String.new\nfreqs = Hash.new(0)\nselected = ARGV.join(' ').gsub(/[,.]/, \"\")\n
words = selected.split(/[^\\w-]+/)\nwords.each { |word| freqs[word] += 1 }\n
freqs_sorted = freqs.sort do |a,b|\n\t
a.last == b.last ? a.first <=> b.first : b.last <=> a.last\nend\n
freqs_sorted.each { |k,v| printf \"[ %8s ] %s\", v, k }"
do shell script "/usr/bin/ruby -e " & rb's quoted form & space & mySelection's quoted form
end concordance
Launch /Applications/Automator and choose New Document, then click the Service icon, and then select the Choose button.
On the left, you will have a list of Libraries from which to choose workflow items. Find Library > Utilities. In the adjacent column, locate the Run Applescript workflow. Click on it, then drag and drop it in the large workflow window to your right.
At the top, you can select Service receives text in any application. Leave Output replaces selected text unchecked.
In your Run AppleScript workflow window, you will see AppleScript boilerplate. Click on it and press command+A, then backspace to delete this content. Copy and paste the above code into this Run AppleScript workflow window. Press the Run button in Automator's upper right corner. If (and it should) a TextEdit window pops up, you are good, and you want to press File > Save. A dialog box will pop-up where you can name your Service. I called my Frequency, you may wish to call it something else. Once you have save it, you can exit Automator. Services are deposited in yourlogin directory/Library/Services.
If you have a Pages document open with text, either select it, or command+a to select the entire document. Now, you select your Service via Pages > Services > Frequency. This will now pop-up a new TextEdit document with the results. If you want to save this new document, you must use option+File to Save as... -
I seem to have lost a sequence created in Premiere Pro CC. I can't find it anywhere inside the Project bin.
We have so many same-name, older projects (between Auto-Save, different drives and so on) that looking inside each of them would take forever.
But we do know the name of the sequence. I am wondering if there is a way to "search" for a sequence name from outside the project?
Thanksthere is a way to "search" for a sequence name outside of the project,
but it would be a pointless waste of time.
sequences are only saved within the project file itself!!
We have so many same-name, older projects (between Auto-Save, different drives and so on) that looking inside each of them would take forever.
better get at it then!
hahahahahahahaha!!! -
Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab? When there was support for Google Toolbar, I was able to do this; now, whenever I want to search for something, I have to open a new tab to do it, and cut-and-paste my search into the search field in the new tab. I used to be able to highlight, drag, and drop something into the search field and have it automatically open in a new tab. This is enough for me to switch to Chrome . . .
Set a preference to have searches from the Search Bar (upper right) automatically open all searches in a new tab
#type '''about:config''' in the URL/Location/Address bar and press the Enter key
#if you see a warning, accept it (promise to be careful)
#Filter = '''browser.search.openintab'''
#in the lower panel, double click the item (or right-click and choose "Toggle") to change the value to "true"
#close the about:config tab and test
#See:
#*For help with opening/using about:config, also see: http://kb.mozillazine.org/About:config
#*Also see: http://kb.mozillazine.org/About:config_entries (click on "Browser", scroll down to browser.search.openintab)
'''Search Bar''': http://support.mozilla.com/en-US/kb/Search+bar
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
About Google toolbar............
Google decided that they will no longer produce the Google Toolbar for Firefox 5 and newer version. It is best to move on to other alternatives than to try any "hacks" to the toolbar that may or may not perform in the future. Future versions of Google toolbar will only work with IE7-9. Google Toolbar is not available on any other browser, even Google's own browser.
*http://googletoolbarhelp.blogspot.com/2011/07/update-on-google-toolbar-for-firefox.html
*https://support.mozilla.com/en-US/kb/google-toolbar-not-compatible-firefox?s=google+toolbar&r=0&as=s
*http://www.google.com/support/toolbar/bin/answer.py?answer=1342452&topic=15356%29
*Google Toolbar 8 FAQ (IE only): https://www.google.com/support/toolbar/bin/answer.py?hl=en&answer=1111588
'''''To access your Google Bookmarks visit''''' www.google.com/bookmarks.
Alternatives:
*http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
*https://addons.mozilla.org/en-US/firefox/addon/googlebar-lite/
*https://addons.mozilla.org/en-US/firefox/addon/gbookmarks-google-bookmarks-fo/ -
Searching for a good file manager
I'm searching for a good file manager. Konqueror 3.5 is quite good, dolphin 4.1 and konqueror 4.1 are not. Since konqueror 3.5 is going to die due to lack of support in the future, I kind of need to find a new good file manager...
Do there exist file managers with the following features?
Many of these features are things I thought were quite logical to be in a file manager, but seem to be missing in most "modern" ones...
-independent of any desktop (gnome or KDE), just a standalone program
-preferably not being both a web browser and file manager in once, at least not in an annoying way. Konqueror 3.5 shows that being that combination is possible without being annoying.
-ability to have a tree view of the folders on one side and list view showing the files and subfolders of the folder currently selected in the tree on the other side
-detailed list view showing at least filename, type, date and size, and the ability to sort according to any of these properties
-a non-detailed view showing image contents would also be nice, to browse folders of photos or other images
-ability to open files in certain programs if you doubleclick the file, NOT open it by singleclicking, singleclicking may only select it
-ability to select multiple files by dragging box around files or using keys like "ctrl" and "shift"
-ability to do "open terminal here" or type terminal commands in the current open directory
-must have ability to drag files from one folder to another, from list view to tree view and vica versa, to move or copy them
-and must have ability to use "ctrl+c" and "ctrl+v" to copy files and foldes from here to there
-multiple tabs is a huge plus
-favorites (to local folder paths) is also a huge plus
-preview of files when hovering the mouse over them is nice
-must have ability to zip and unzip (or other compression formats) folders by just right clicking them and choosing a zip/unzip command there
-in addition to that, must also have ability to browse through a zip file as you would through a normal directory, and drag files from the insides of the zip file to the tree view to automatically unzip those files there, and of course "ctrl+c"/"ctrl+v" should also work to copy a file from the inside of the zip file, to some other folder on your disk
-no horizontal autoscrolling in the tree view, that is an invention straight from the abyss...I know exactly how you feel about KDE 4 vs. 3 -- Konqueror was the best part of KDE for me (pretty much the only part I ever used, actually; my window manager is a slightly modified version of WMII and I generally loathe "desktop environments"). KDE 4 ruined it, completely and utterly.
I submitted about 20 different bug reports about Konqeuror 4, mostly features that they'd deleted or mangled; some of them are starting to be addressed now. I don't think they'll ever fix the speed issues though, because those are dependent on the underlying KDE 4 libraries as far as I can tell -- it's as if KDE 4 were purposely and deliberately designed to be slower than KDE 3. Even if they fix all of its deficiencies, that'll probably keep me from using it...
Right now there's KDEmod, which will hopefully maintain its KDE 3 branch for a while longer. It's starting to show some problems, though; I haven't been able to get kdemod konqueror 3 to work fully out of the box (the settings pages are all blank). On my main machine, I somehow managed to hack together some of the KDEmod3 packages so that I have a functional konqueror 3 running alongside the Arch repository's version of KDE4. I'm afraid to pacman -Syu now, though, because it will probably break horribly :P
I don't remember exactly how I got konqueror 3 going like that, as I did it in my initial fit of rage after I did the pacman -Syu that got me KDE4 (a decision I have regretted ever since), but it was something like this:
1. move /opt to /opt.kde4
2. make a new /opt
3. download several KDE 3 packages from the KDEmod3 repositories manually
4. extract those packages into the new /opt with tar -xzf (NOT pacman!)
5. try /opt/kde/bin/konqueror
6. read reams of error messages about missing libraries, segfaults, etc.
7. try to supply the missing libraries by downloading other kdemod3 packages and manually extracting them
8. goto 5
Then, when everything worked (sort of), I renamed some stuff so that 'konqueror' is konqueror 4 (I think having it konqueror 3 broke something else, but I don't remember what), and konqueror 3 is called 'k3nqueror'.
If KDEmod3 ever goes away and there's no other good replacement file manager by then, I'll probably take the source code of KDE3 and try to make a standalone version of konqueror out of it. (Which will probably be quite a project because of how interdependent all the KDE components are.)
Some features I "need" in a file manager, besides the ones you mentioned:
- Konqueror's tree view (where you can expand folder branches in the file list)
- Infinite view splitting -- I frequently have my konqueror windows split into 4, sometimes as many as 6 or 7 view panes. Very useful for sorting out files.
- Selection rectangles are sensitive only over files -- I find full-row-select really annoying, because there are no guaranteed "blank" areas that you can click on to clear a selection. I also use this behaviour to grab long-named files that are interspersed with short ones, because they hilight first when the rectangle touches them (you wouldn't think this very useful, but surprisingly often you do want to do something to all the long-named files...)
- Right-clicking on a folder and clicking "Paste" pastes into that folder, not the current one -- you'd be amazed at how many file managers get this wrong. I shouldn't have to cd into a folder just to paste some files there. -
I have an 800 page pdf document to index and so far I have a script that will search for a list of keywords. But the text has large sections of code in a different font, and I think we would like to generate an index of just code examples. Is there a way to search for text of a given font in applescript? Something like
set theSel to find text theText
if the font of theSel is "Times"
write to file, etc.Please do send a page, I might be able to spot where the font problem is coming from - but no guarantee Address is in my profile.
You asked about the script formatter. red_menace of this forum wrote the script I use. To use it, you copy the script that you want to format to the clipboard and run the formatter. This then places the marked-up text in the clipboard so that you can paste it into the forum page.
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px; height: 340px;
color: #000000;
background-color: #FFDDFF;
overflow: auto;">
script formatter - formats the clipboard text for forum posting
last reviewed January 19, 2009 red_menace[at]mac[dot]com
Input: text read from the clipboard
Output: formatted text copied to the clipboard
set AppleScript's text item delimiters to " "
-- some constants and switches
property TextColor : "#000000" -- black (see http://www.w3schools.com/tags/ref_colornames.asp)
property BackgroundColor : "#FFDDFF" -- a light plum/purple
property BorderColor : "#000000" -- black
property TheWidth : "width: 720px; " -- a width attribute (deprecated in HTML 4.01)
property UseWidth : true -- use the width attribute?
property LineCount : 25 -- the number of lines before including the height attribute
property TheHeight : "height: " & ((LineCount * 13.6) as integer) & "px; " -- a maximum height for the <pre> box
property Emphasize : false -- emphasise (bold) the script text?
property UseURL : false -- include a Script Editor message link?
property AltURL : false -- use an alternate URL encoding?
property ToolTips : {¬
"this text can be pasted into the Script Editor", ¬
"this text can be pasted into an Automator 'Run AppleScript' action", ¬
"this text can be pasted into an Automator 'Run Shell Script' action", ¬
"this text can be pasted into a HTML editor", ¬
"this text can be pasted into a text editor", ¬
"- none -"}
property TooltipDefault : {item 1 of ToolTips} -- keep track of the last tooltip used
property TempFile : "Script_Formatter_TempFile" -- a temporary work file
try
-- write the clipboard to the temporary file
set TheClipboard to (the clipboard) as text
if TheClipboard is in {"", space, tab, return} then return -- clipboard is (basically) empty
set MyOpenFile to open for access ("/tmp/" & TempFile & ".txt" as POSIX file) with write permission
set eof of MyOpenFile to 0 -- empty any previous temp file
write TheClipboard to MyOpenFile
close access MyOpenFile
if UseURL then
-- encode URL (see http://developer.apple.com/documentation/Darwin/Reference/Manpages/man1/pydoc.1. html)
do shell script "/usr/bin/python -c 'import sys, urllib; print urllib.quote(sys.argv[1])' " & quoted form of TheClipboard
-- add a link wrapper
set URLtext to "applescript://com.apple.scripteditor?action=new&script=" & the result
if AltURL then -- use an alternate URL encoding
set URLtext to "Click here to [url=" & URLtext & "]open this script in the Script Editor[/url]:<br />"
else -- use HTML anchor tag
set URLtext to "Click here to <a href=\"" & URLtext & "\">open this script in the Script Editor</a>:<br />"
end if
set PromptText to ((count URLtext) as text) & " URL and "
else
set {URLtext, PromptText} to {"", ""}
end if -- UseURL
-- convert to HTML (see http://developer.apple.com/documentation/Darwin/Reference/ManPages/man1/textutil .1.html)
do shell script "cd /tmp/; /usr/bin/textutil -convert html -excludedelements '(html, head, title, body, p, span, font)' -encoding US-ASCII " & TempFile & ".txt"
-- fix up some formatting and add a pre wrapper (see http://www.w3schools.com/tags/default.asp)
set HTMLtext to rest of paragraphs of (read ("/tmp/" & TempFile & ".html" as POSIX file))
if (count HTMLtext) is less than LineCount then -- skip the height attribute
set Height to ""
else
set Height to TheHeight
end if
set HTMLtext to FixCharacters from (HTMLtext as text) -- additional character encodings
if UseWidth then
set Width to TheWidth
else
set Width to ""
end if
if Emphasize then set HTMLtext to "<strong>" & HTMLtext & "</strong>"
set HTMLtext to "<pre style=\"
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid " & BorderColor & ";
" & Width & Height & "
color: " & TextColor & ";
background-color: " & BackgroundColor & ";
overflow: auto;\"
title=\"\">
" & HTMLtext & "</pre>
-- assemble everything on the clipboard
set TheResult to choose from list ToolTips ¬
with title "Script Formatted" with prompt PromptText & ((count HTMLtext) as text) & " HTML characters will be placed on the clipboard (plus the following ToolTip):" default items TooltipDefault OK button name "OK" cancel button name "Cancel" with empty selection allowed without multiple selections allowed
if TheResult is false then -- cancel button
error number -128
else -- add the selected title attribute (tooltip), if any
set TooltipDefault to TheResult as text
set Here to (offset of " title=" in HTMLtext) - 1
set There to (offset of ">" in HTMLtext) - 1
if TheResult is in {{}, "- none -"} then -- no tooltip
set the clipboard to URLtext & (text 1 thru (Here - 1) of HTMLtext) & (text (There + 1) thru -1 of HTMLtext)
else
set the clipboard to URLtext & (text 1 thru (Here + 9) of HTMLtext) & TheResult & (text There thru -1 of HTMLtext)
end if
end if -- TheResult is false
on error ErrorMessage number ErrorNumber
log space & (ErrorNumber as text) & ":" & tab & ErrorMessage
try
close access MyOpenFile
end try
if (ErrorNumber is -128) or (ErrorNumber is -1711) then -- nothing (user cancelled)
else
activate me
display alert "Error " & (ErrorNumber as text) message ErrorMessage as warning buttons {"OK"} default button "OK"
end if
end try
to FixCharacters from TheText
fixes (converts) formatting characters used in some message forums (see http://www.asciitable.com/)
parameters - TheText [text]: the text to fix
returns [text]: the fixed text
-- this list of lists contains the characters to encode - item 1 is the character, item 2 is the HTML encoding
set TheCharacters to {¬
{"!", "!"}, ¬
{"*", "*"}, ¬
{"+", "+"}, ¬
{"-", "-"}, ¬
{"[", "["}, ¬
{"\\", "\"}, ¬
{"]", "]"}, ¬
{"^", "^"}, ¬
{"_", "_"}, ¬
{"~", "~"}}
set TempTID to AppleScript's text item delimiters
repeat with SomeCharacter in TheCharacters
if item 1 of SomeCharacter is in TheText then -- replace
set AppleScript's text item delimiters to item 1 of SomeCharacter
set the ItemList to text items of TheText
set AppleScript's text item delimiters to item 2 of SomeCharacter
set TheText to the ItemList as text
end if
end repeat
set AppleScript's text item delimiters to TempTID
return TheText
end FixCharacters
</pre> -
Addn to stock flag for putaway strategy not working
Hi
It seems that the flag Addn to stock for putaway strategy in the storage type 103 configuration is not working fine as the quantities of the same material with the same batch sent to the same stype 103, and destination bin are not being added. So by running stock report in WM we see several lines with partial quantities instead of only one line with the total quantity in place. Do anybody know how can that be solved? Or what can be the route cause of the issue? Is there any OSS known applicable to fix the problem?
Thx for your help
AlbaHi Guys
Unfortunately I do not think that you will get an answer now. Either your question is not simple or we do not know.
So in the interest of keeping the Forum tidy and easier to surf through could you please close your thread and wither try one of the other forums or try another post. I do not think that mosy people will bother to look this far back anymore.
Sorry I cannot help as I would if I could.
Regards
Frenchy. -
Hi experts,
My question is How system calculate the capacity for putaway for SUT strategy and we are not maintaining any capcity in bin master data.
Scenario:
We are using SUT strategy and I have divided my bin into two sections A and B and some bins I have divided like 10 also.
Now I have added storage bin type to storage bin and for that bin type I have assigned possible SUTS.
I have allowed mixed storage A(allow homogenious SUT) and addition to existing stock.
In material master I have mentioned like 10 E1 and 20 E2 as LE quantity.Now in one storage bin I kept only 5 E1 and after that I
want to put 15 E1. Then how system behaves here, for eg. if system put that 15 in another bin then how what about the free
space in bin and how system select the storage bin section.
Your help is greatly appriciated
Thank
RaghuHello,
Not sure if I understand the question but:
System simply picks the lowest bin and selects next lowest bin after bin is ocupied by single SU.
I don't think bin selection by open capacity (after SU is moved into it) is standard SAP.
In my opinion if you need the remaining space filled the moves will need to be done manualy.
If any one reads this and knows better please post to correct me. -
U0093Addn to stocku0094 for putaway strategy u0093 u0093 in storage type not working
Hi
It seems that the flag Addn to stock for putaway strategy in the storage type 103 configuration is not working fine as the quantities of the same material with the same batch sent to the same stype 103, and destination bin are not being added. So by running stock report in WM we see several lines with partial quantities instead of only one line with the total quantity in place. Do anybody know how can that be solved? Or what can be the route cause of the issue? Is there any OSS known applicable to fix the problem?
Thx for your helpHi Alba,
Please check the WM views in MM.
I've checked:
(SAP help pushing F1 when the cursor is set on this thick box)
<i>Indicator: Allow addition to existing stock
Indicator determining whether a material with particular characteristics may be added to existing stock of the same material with the same characteristics in one storage bin.
Dependencies
If the storage type control table does not allow additions to existing stock for this storage type, the indicator set in the material master record is ineffective.</i>
+
(SAP help)
http://help.sap.com/saphelp_46c/helpdata/en/c6/f8449d4afa11d182b90000e829fbfe/frameset.htm
I think you have to set this indicator!
BR
Csbaa -
How can I highlight in colour the keywords I searched for?
When I type a text into Google, and get a link to a page,
I'd like the text I searched for to appear as highlight in the page...
Does the highlight feature exist in Firefox?
(If you have to go through pages of text in order to get to the results, it can be long to find...)Some websites do that automatically: they detect that you found them in a Google search and highlight your search terms for you.
(Some people find that a little creepy...)
Firefox doesn't do that, but if you install the Google toolbar and do your searches through the toolbar, then it can add the highlights:
See: [http://www.google.com/support/toolbar/bin/answer.py?answer=9273&hl=en Highlight and find words on websites : Master advanced features - Toolbar Help]
(Edit: I don't use the Google toolbar, so I'm just going by what they have posted about it.) -
Parallelized for loop. Searching for a one-line solution
Hi.
In an usual day I do a lot of for loops inside of command line. But I noted that my loops don't use the full power of my dual core processor, they only use one processor.
A lot of the loops I do have independent interactions in the sense that a interaction code don't need the results of another interaction. This is the simplest problem in multiprocessing, I only need to execute N process in parallel.
I'm searching for a one-line solution that I can use in place of a 'for i in *.txt; do echo $i;done'. With one-line I means that can be used as one-line but the implementation can be longer. And can be in any programming language.
For now I'm using the following small python solution (the smallest I could get)
#!/usr/bin/env python
# -*- coding: utf-8 -*-
from multiprocessing import Pool
from glob import glob
from subprocess import call
def f(x):
call(['asy', '-f', 'png', '-render=0', x])
pool = Pool(processes=4)
pool.map(f, glob('*.asy'))
But I like something that can be integrated in my "shell life". Anyone know a solution for my problem?http://stackoverflow.com/questions/3816 … ash-script
http://www.mail-archive.com/bug-bash@gn … 05820.html
Last edited by karol (2009-11-23 00:30:34)
Maybe you are looking for
-
MacBook Pro (17-inch, Mid 2009) Bootcamp install of Windows 7 fails
I searched and tried everything suggested, but I am unable to get Windows 7 to install on my MacBook Pro (Updated to OSX Lion 10.7.4) I even replaced the hard drive, installed Snow Leopard, upgraded to Lion, and am still at the same place. Bootcamp a
-
Need help adding footer to PDF
I have Adobe Acrobat XI and I am trying to add a footer to a PDF, but I only receive a pop up message: You do not have sufficient permissions to perform this task. Please help!!
-
Where's the drop-down with "Recent places" in "Open File" dialogue?
Hi, Until Mountain Lion, all "Open file" dialogue boxes included at the top a drop-down list with higher-level locations as welll as "recent places" - folders that were recently used to open files. In apps such as Smultron, this is hugely efficient a
-
I get the following error when running Chrome v18.0.1025.163 on my MacBook Pro with MacOS 10.7.3 kernel: IOSurface: buffer allocation size is zero I have had many tabs crash, then it crashes the Chrome application, then quickly making my entire Mac u
-
RAW (NEF) file for NIKON D800
My Lr3 is not reading NIKO NEF (RAW) file after I updated the software. WHen will you be releasing NIKON RAW for D800?