Bind to in-process report server failed --- urgent

Dear all,
I installed 10g R2 application server on RHEL AS 4.0 with infrastructure and Business intelligence in the same machine. After the installation I tested the forms, iit is working fine by running a test form but when i tried to test a demo report with
http://hostname:7778/repdemo and
running the jsp report it is showing java exception error and
running the paper report it is showing REP- 51002 bind to reports server failed.
even
http://hostname:7778/reports/rwservlet/showjobs?
also showing that REP- 51002 bind to reports server failed.
please help to resolve this issue i struck with this errors in the customer site

$OH/reports/server/rep_<Server_name>.dat
delete this file and restart the forms & reports

Similar Messages

  • Reports 11gR2 - The in-process Reports Server  failed to start

    Hello,
    I recently installed the new Forms Reports 11gR2 on an Oracle Linux 5 update 6 64bit. Firstly, I installed the JDK1.6.29 64bit. Then, I installed the Weblogic Server 10.3.5 (jar version). Finally, I installed the Forms Reports 11gR2. After installation I reboot the machine. When it came up I manually started the Weblogic Server (10.3.5), the WLS_Forms, the WLS_Reports and OPMN. Everything looks fine except the in-process reports server.
    I can access the page (http://apps8.orasys.gr:8888/reports/rwservlet) without any problems but when I try to access the showjobs (http://apps8.orasys.gr:8888/reports/rwservlet/showjobs?)
    I get this message “REP-52266: The in-process Reports Server rep_wls_reports_apps8_asinst_1 failed to start.oracle.reports.RWException: IDL:oracle/reports/RWException:1.0”
    The status of the In-process Reports Server is down. When I try to start it, it fails. This is what I get in the log files:
    #SEARCH_CRITERIA
    #     START_TIME: 2011-11-15T09:36:20.036+02:00
    #     END_TIME: 2011-11-15T10:36:20.036+02:00
    #     MESSAGE_TYPES:INCIDENT_ERROR, ERROR, UNKNOWN
    #SELECTED_TARGETS_LIST
    #     /Farm_ClassicDomain/ClassicDomain/WLS_REPORTS/reports(11.1.2):oracle_repapp
    [2011-11-15T10:06:53.414+02:00] [WLS_REPORTS] [INCIDENT_ERROR] [REP-50125] [oracle.reports.server] [host: apps8.orasys.gr] [nwaddr: 212.205.62.203] [tid: Thread-34] [userId: <anonymous>] [ecid: 004gS5sBFOS0RtdePdaQPP00017Y00000O,1:27964] [probKey: 33] [APP: reports#11.1.2] [URI: /reports/rwservlet/showjobs] REP-50125 : java.lang.StringIndexOutOfBoundsException: String index out of range: -1 [[
    java.lang.StringIndexOutOfBoundsException: String index out of range: -1
         at java.lang.String.substring(String.java:1937)
         at oracle.reports.server.LDAPManager.createDirContext(LDAPManager.java:260)
         at oracle.reports.server.LDAPManager.createOIDContext(LDAPManager.java:176)
         at oracle.reports.server.RWSecurity.start(RWSecurity.java:122)
         at oracle.reports.server.SecurityHelper.start(SecurityHelper.java:107)
         at oracle.reports.server.RWServer.startServer(RWServer.java:985)
         at oracle.reports.server.RWServer.run(RWServer.java:358)
         at java.lang.Thread.run(Thread.java:662)
    [2011-11-15T10:07:02.729+02:00] [WLS_REPORTS] [INCIDENT_ERROR] [] [oracle.reports.servlet] [host: apps8.orasys.gr] [nwaddr: 212.205.62.203] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 004gS5sBFOS0RtdePdaQPP00017Y00000O,0:1:0x5f5e102] [probKey: 34] [APP: reports#11.1.2] [URI: /reports/rwservlet/showjobs] ServerManager:getServer Bind to Reports Server rep_wls_reports_apps8_asinst_1 failed.
    [2011-11-15T10:36:05.110+02:00] [WLS_REPORTS] [INCIDENT_ERROR] [REP-50125] [oracle.reports.server] [host: apps8.orasys.gr] [nwaddr: 212.205.62.203] [tid: Thread-68] [userId: weblogic] [ecid: 9abaf3e65885e557:23d03fee:133a635b091:-8000-0000000000000296,0] [probKey: 35] [APP: reports#11.1.2] REP-50125 : java.lang.StringIndexOutOfBoundsException: String index out of range: -1 [[
    java.lang.StringIndexOutOfBoundsException: String index out of range: -1
         at java.lang.String.substring(String.java:1937)
         at oracle.reports.server.LDAPManager.createDirContext(LDAPManager.java:260)
         at oracle.reports.server.LDAPManager.createOIDContext(LDAPManager.java:176)
         at oracle.reports.server.RWSecurity.start(RWSecurity.java:122)
         at oracle.reports.server.SecurityHelper.start(SecurityHelper.java:107)
         at oracle.reports.server.RWServer.startServer(RWServer.java:985)
         at oracle.reports.server.RWServer.run(RWServer.java:358)
         at java.lang.Thread.run(Thread.java:662)
    [2011-11-15T10:36:11.798+02:00] [WLS_REPORTS] [INCIDENT_ERROR] [] [oracle.reports.servlet] [host: apps8.orasys.gr] [nwaddr: 212.205.62.203] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 9abaf3e65885e557:23d03fee:133a635b091:-8000-0000000000000296,1:27966] [probKey: 36] [APP: reports#11.1.2] ServerManager:getServer Bind to Reports Server rep_wls_reports_apps8_asinst_1 failed.
    #MESSAGE_COUNT: 4
    Please help. I really need to evaluate version in order to move to it as soon as possible.
    Thank you in advance,
    Evris

    Hi Evris,
    REP-50125 : java.lang.StringIndexOutOfBoundsException: String index out of range: -1
    Follow the below metalink id
    Start Report Server Failed, Javalang String Indexoutof Boundexception Rep-50125 [ID 372362.1]
    Hope this will be helpful,
    Regards,
    Fabian

  • PFRD 11.1.1.4 - How to stop the In-process Reports Server

    I'm running an "out-of-the-box" PFRD 11.1.1.4 installation in Windows XP SP3.
    According with documentation:
    http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_strt006.htm#BEHDJFHD
    To directly start or stop the in-process Reports Server using a URL, enter the following in your Web browser:
    http://machine_name:port/reports/rwservlet/startserver
    http://machine_name:port/reports/rwservlet/stopserver
    startserver works.
    stopserver returns:
    REP-50171 : Authentication failed.
    Tried
    http://machine_name:port/reports/rwservlet/stopserver?authid=weblogic/passwd
    same error.
    Commented the line:
    <!--security class="oracle.reports.server.RWJAZNSecurity" id="rwJaznSec"/-->
    in rwserver.conf.
    Same error.
    The only uncomented elements in "rwservlet.properties" (original configuration) are
    <server>rep_wls_reports_pfurtado-lap_asinst_1</server>
    <singlesignon>no</singlesignon>
    <inprocess>yes</inprocess>
    Did any of you managed to stop "in-process" reports server using the reports servlet?
    What credentials did you use?
    Thanks & Best Regards
    Paulo

    Thanks RZ!
    The line you mentioned was already as you described.
    According with the documentation:
    [Starting and Stopping Reports Server|http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_strt001.htm#i1005629]
    If Reports Server is running as an in-process server through the Reports Servlet, issue the following URL:
    http://your_host_name:port_number/reports/rwservlet/stopserver?authid=admin user/admin password
    Note:
    authid is Reports Server's administration user name and password. In Oracle Reports 11g Release 1 (11.1.1), the default security is based on standards-based Java EE security model through Oracle Platform Security Services. For a non-secure Reports Server, this user is defined in the identifier element.
    I added the identifier element to rwserver.conf and restarted WLS_REPORTS, but after this the in-process reports server failed to start with the usual generic exception.
    I finally found the missing step in:
    How To Secure Showjobs Web Command In A Non Secured Reports Server In Oracle Report 11g? (Doc ID 1242614.1)
    The thing is that the identifier element has to be placed in the right location inside rwserver.conf:
    The needed change is:
    FROM
    <queue maxQueueSize="1000"/>
    <pluginParam name="mailServer" value="%MAILSERVER_NAME%"/>
    TO
    <queue maxQueueSize="1000"/>
    <identifier encrypted="no">....type here your user/password....</identifier>
    <pluginParam name="mailServer" value="%MAILSERVER_NAME%"/>
    So although using the default non-secure reports server, the identifier element has to be present in rwserver.conf for rwservlet/stopserver to work as described above.
    Otherwise the needed authentication will fail as described.
    Regards
    Paulo

  • REP-52266: The in-process Reports Server rep_myhostname failed to start

    Hi Everyone,
    My name is John and I've a small 10g report configuration issue which I would like to share and, hopefully, some of you might already have come across it and able to assist and guide me through it.
    First, I've installed Oracle Developer Suite 10g 10.1.2.0.2 together with Report Builder 10.1.2.0.2 and Oracle Forms Developer 10.1.2.0.2 onto a 32bit Window 2000 Professional machine.
    I've tried to run the following URL which test for the servlet connectivity and it returns fine with all the valid reports servlet commands page.
    http://myhostname:8889/reports/rwservlet
    However, as I've tried to run the 'test.rdf' report using the following link:
    http://myhostname:8889/reports/rwservlet?destype=cache&desformat=PDF&report=test.rdf&userid=user/pass@host
    And it returns the following error on the browser:
    REP-52266: The in-process Reports Server rep_myhostname failed to start.oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
    Then I set trace option on in the myhostname.conf file and restart the OC4J instance. And the trace file has the following results:
    *[2009/2/18 11:21:31:687] Info 56021 (EngineManager:spawnEngine): Engine rwURLEng-0 has been launched*
    *[2009/2/18 11:21:31:687] State 56004 (EngineInfo:setState): Engine rwURLEng-0 state is: Initial*
    *[2009/2/18 11:21:31:687] Debug 50103 (JobStore:writePersistFile): Purge persistent file*
    *[2009/2/18 11:21:31:717] Debug 50103 (JobStore:writePersistFile): Purge persistent file done*
    *[2009/2/18 11:21:51:766] Warning 50103 (EngineManager:registerEngine): REP-55103: API URLEngine:getEngineEnvs not applicable to URL engine*
    *[2009/2/18 11:21:51:766] Info 56026 (EngineManager:registerEngine): Reports Server started up engine rwURLEng-0*
    *[2009/2/18 11:21:51:856] Debug 50103 (EngineManager:updateEngineState): Engine rwURLEng-0 status is 1*
    *[2009/2/18 11:21:51:856] State 56004 (EngineInfo:setState): Engine rwURLEng-0 state is: Ready*
    *[2009/2/18 11:23:1:687] Info 56106 (EngineManager:manage): Engine rwEng-0 is destroyed due to timeout*
    *[2009/2/18 11:23:1:687] Exception 56097 (): Engine rwEng-0 callback timeout*
    oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
    *     at oracle.reports.utility.Utility.newRWException(Utility.java:756)*
    *     at oracle.reports.server.EngineManager.manage(EngineManager.java:291)*
    *     at oracle.reports.server.IdleThread.run(IdleThread.java:88)*
    *[2009/2/18 11:23:1:707] Debug 50103 (ServerPacketReceiver:handlePacket): Got a request packet*
    *[2009/2/18 11:23:1:717] Info 56029 (EngineManager:shutdownEngine): Shutting down engine rwURLEng-0*
    *[2009/2/18 11:23:1:717] State 56004 (EngineInfo:setState): Engine rwURLEng-0 state is: Shutdown*
    *[2009/2/18 11:23:1:727] Info 56047 (EngineManager:remove): Reports Server shut down engine rwURLEng-0*
    *[2009/2/18 11:23:5:813] Info 50103 (ServerPacketHandler:stop): Multicastmanager stopped successfully*
    *[2009/2/18 11:23:5:813] Info 50002 (RWServer:shutdown): Server is shutting down*
    *[2009/2/18 11:23:5:813] Info 50103 (RWServer:startServer): Notify thread to exit*
    *[2009/2/18 11:23:5:843] Info 50103 (RWServer:startServer): RWServer thread exits*
    *[2009/2/18 11:23:5:843] Exception 56097 (): Engine rwEng-0 callback timeout*
    oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
    *     at oracle.reports.utility.Utility.newRWException(Utility.java:756)*
    *     at oracle.reports.server.EngineManager.manage(EngineManager.java:291)*
    *     at oracle.reports.server.IdleThread.run(IdleThread.java:88)*
    I've not changed any of the report's related configuration files and the java version of the machine is 1.4.2_06. I do not know whether I need to apply a patch for this particular Developer Suite version or is there something which I've not done in terms of post-installation tasks. Thank you for your time and effort. Any feedback is much appreciated as I've been spending a number of days to solve this problem. Thank you and have a nice day.
    Kind Regards,
    John

    Hi,
    Thanks for your reply and here is the output of the rwEng-0.trc file. I could not find anything "interesting" as you mentioned. Please let me know if you find anything missing in there. Also, currently there is only one network printer setup on the machine. Can you please elaborate on the printer bit as I'm unsure of what to troubleshoot. Also, I forgot to inform you that I have a previous version of Developer 2000 Form and Report installed prior to the 10g Developer Suite installation. Does it ring a bell to any other problem? Thank you again for your time and effort. Have a nice day.
    Kind Regards,
    John
    *[2009/2/18 11:21:35:773] Debug 50103 (RWEngine:init): args[0]=name=rwEng-0*
    *[2009/2/18 11:21:35:773] Debug 50103 (RWEngine:init): args[1]=server=rep_myhostname*
    *[2009/2/18 11:21:35:773] Debug 50103 (RWEngine:init): args[2]=ORACLE_HOME=C:\oracle\ora10g1*
    *[2009/2/18 11:21:35:773] Debug 50103 (RWEngine:init): args[3]=engineimplclass=oracle.reports.engine.EngineImpl*
    *[2009/2/18 11:21:35:773] Debug 50103 (RWEngine:init): args[4]=traceopts=trace_all*
    *[2009/2/18 11:21:35:773] Debug 50103 (RWEngine:init): args[5]=tracefile=C:\oracle\ora10g1\reports\logs\rep_EZRA\rwEng-0.trc*
    *[2009/2/18 11:21:35:773] Debug 50103 (RWEngine:init): args[6]=tracemode=trace_replace*
    *[2009/2/18 11:21:35:773] Debug 50103 (RWEngine:init): args[7]=cacheDir=C:\oracle\ora10g1\reports\cache*
    *[2009/2/18 11:21:35:783] Debug 50103 (RWEngine:init): args[8]=server_ior=C:\TEMP\tmp_1440568*
    *[2009/2/18 11:21:36:284] Info 50128 (RWEngine:init): orb init succeeded*
    *[2009/2/18 11:21:37:45] Info 55007 (EngineImpl:loadLibrary): Load rw.dll succeeded*
    *[2009/2/18 11:21:37:45] Debug 50103 (EngineImpl:init): useDataCache = null*
    *[2009/2/18 11:21:37:45] Debug 50103 (EngineImpl:init): ignoreDataParameter = null*
    *[2009/2/18 11:21:37:75] Debug 50103 (EngineImpl:EngineImpl): start CInitEngine()*
    *[2009/2/18 11:21:37:75] Debug 50103 (EngineImpl:EngineImpl): commandline[0] = rw*
    *[2009/2/18 11:21:37:75] Debug 50103 (EngineImpl:EngineImpl): commandline[1] = ora_rw20_3tng*
    *[2009/2/18 11:21:37:75] Debug 50103 (EngineImpl:EngineImpl): commandline[2] = rep_myhostname*
    *[2009/2/18 11:21:37:75] Debug 50103 (EngineImpl:EngineImpl): commandline[3] = C:\oracle\ora10g1\reports\cache*
    *[2009/2/18 11:21:37:85] Debug 50103 (EngineImpl:EngineImpl): commandline[4] = null*
    *[2009/2/18 11:21:37:85] Debug 50103 (EngineImpl:EngineImpl): commandline[5] = null*
    *[2009/2/18 11:21:37:85] Debug 50103 (EngineImpl:EngineImpl): commandline[6] = trace_all*
    *[2009/2/18 11:21:37:85] Debug 50103 (EngineImpl:EngineImpl): commandline[7] = C:\oracle\ora10g1\reports\logs\rep_EZRA\rwEng-0.trc*
    *[2009/2/18 11:21:37:85] Debug 50103 (EngineImpl:EngineImpl): commandline[8] = trace_replace*
    *[2009/2/18 11:21:37:85] Debug 50103 (EngineImpl:EngineImpl): commandline[9] = null*
    *[2009/2/18 11:21:37:85] Debug 50103 (EngineImpl:EngineImpl): commandline[10] = null*
    *[2009/2/18 11:21:37:85] Debug 50103 (EngineImpl:EngineImpl): commandline[11] = null*

  • REP-52266: The in-process Reports Server rep_adminserver_ikit_asinst_1 failed to start.oracle.reports.RWException: IDL:oracle/reports/RWException:1.0

    Hi,
    I have installed oracle forms and reports 11gR2 on Windows 7 Professional 64bit (and configured in development mode), the forms are working fine but when i run a report i get this message
    REP-52266: The in-process Reports Server rep_adminserver_ikit_asinst_1 failed to start.oracle.reports.RWException: IDL:oracle/reports/RWException:1.0

    I was trying to add a new destination:
       <destination class="oracle.reports.server.DesMail" destype="mail"/>
    I couldn't make it work , so I commented my changes.
    In fact, I should have gone back to a backup file , as weblogic seemed to have changed the file itself!! (attributes of the xml tags were in different order, and more things ...) but just undoing what I have done did the trick.
    This file seems to be quite picky, I left this tag uncommented
       </pluginParam>
    and the same REP-5226 error happened.

  • In-Process Report Server error

    Hi,
    I use Oracle Database 10g and Oracle Developer 10g (Forms and Reports)
    In Windows 2000 SP4 platform.
    I am having difficulties with the OracleAS Reports Service page.
    http://localhost:8889/reports/rwservlet
    It showed OracleAS Reports Services - Servlet Command Help
    Next, I tried to navigate to the following URL
    http://localhost:8889/reports/rwservlet/showjobs
    Suddenly another window message popup showing an error
    The window's title is : javaw.exe - Entry Point Not Found
    The procedure entry point kguuseg could not be located in the dynamic link library oraclient10.dll
    with only one button "Ok" to click
    After I clicked the button, the following error appear in the web browser
    REP-52266: The in-process Reports Server rep_<computer_name> failed to start.oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
    The same error happens to all commands listed in the Servlet Command Help page.
    I also noticed that inside the OC4J command prompt which is running, the following error listed
    Not able to load oracle.reports.util.EnvironmentGlobal class
    Using oracle.reports.util.Environment class
    REP-56105: Engine rwEng-0 died with error:
    Is there anybody who has the same problem?
    Is there any solution for this problem?
    Many thanks,
    Buntoro

    Hi,
    Problem solved.
    I got the solution from another post.
    Re: REP-51002: Bind to Reports Server rep failed
    Here are the step I did.
    Note : Please make backup for the following file : rwnetwork.conf
    - In file rwnetwork.conf, remove or commented the following
    <multicast channel="228.5.6.7" port="14021" timeout="1000" retry="3"/>
    - And then uncommented
    <namingService name="Cos" host="%NAMING_HOST%" port="%NAMING_PORT%"/>
    - replace the
    %NAMING_HOST% with your computer name or specify an IP address
    %NAMING_PORT% with 14021
    It should look like this :
    <namingService name="Cos" host="blahblah" port="14021"/>
    - I did not change the : name="Cos", since I do not understand what does it for
    - Save you changes.
    - Start the OC4J.
    - Find the location of : namingservice.bat (on Windows platform)
    - execute in the command line : namingservice.bat 14021
    - finally start the report in the web browser
    Note:
    To shutdown the namingservice, use : namingservice.bat 14021 shutdown
    Regards.
    Buntoro

  • How to setup in-process report server 11g on linux for destype=printer

    Currently, I'm facing following error when send RDF report directly on printer with destype=printer using run_report_object built-in
    REP-50159: The report generated successfully but distribution to destinations failed.
    REP-50157: Destination ID TESTREP failed with error An error occurred while sending the file to printer \\hostname\printername. Exit with error code 1..
    When i check on report server cache PDF file is generated /wls/asinst_1/reports/cache/\\askit\PRN01F8gFTQkG5v.pdf but job not go to printer as mention in trace rwlpr.trc file output below.
    Note: rwlpr.trc file generated by following 268295.1
    ==============================================================
    XAUTHORITY=/tmp/.gdmT93JDW
    _=/usr/bin/env
    Parameters : -P "\\askit\PRN01F8" -#1 "/wls/asinst_1/reports/cache/\\askit\PRN01F8gFTQkG5v.pdf"
    + '[' '!' 4 -gt 0 ']'
    + '[' -P = -help ']'
    ++ uname -s
    + '[' Linux = HP-UX ']'
    + PRNCMDS='lpr lp'
    + for CMD in '$PRNCMDS'
    ++ which lpr
    ++ grep lpr
    + PRNCMDPATH=/usr/bin/lpr
    + '[' '!' -x /usr/bin/lpr ']'
    + '[' -x /usr/bin/lpr ']'
    ++ basename /usr/bin/lpr
    + '[' lpr = lpr ']'
    ++ uname -s
    + '[' Linux = Linux ']'
    ++ echo -P '"\\askit\PRN01F8"' -#1 '"/wls/asinst_1/reports/cache/\\askit\PRN01F8gFTQkG5v.pdf"'
    ++ tr -d '"'
    + /usr/bin/lpr -P '\\askit\PRN01F8' -#1 '/wls/asinst_1/reports/cache/\\askit\PRN01F8gFTQkG5v.pdf'
    /usr/bin/lpr: The printer or class was not found.
    + exit 1
    =============================================================
    I didn't do any configuration in Enterprise Manager for Printer Configuration. Is this the reason? Is any thing I missed out?
    Environment Setup:
    Server Side:
    Oracle Linux 5 (No printer is setup)
    Oracle Weblogic Server 10.3.6
    Oracle FMW Forms and Report 11.1.2
    Configure: In-Process Report Server
    Client Side:
    Window 7
    Printer: Default network printer set with client
    Best Regards,
    Fani

    Hi,
    the first thing you need to check is if you are able to print from the OS using the same lpr command that reports is using and using the printer queue being used when you submitted the report request.
    Try to print any file from command line using lpr and your print queue \\askit\PRN01F8. If this does not work then that needs to be fixed from the OS standpoint before running report to printer.
    Hope it helps
    Regards, RZ

  • How to setup in-process report server 11g on linux for destype=mail

    Currently, getting Error when send report as an email attachment destype=mail. Is there any thing missed out during Mail server configuration?
    REP-50159: The report generated successfully but distribution to destinations failed.
    REP-50152: Destination ID ProfitLoss failed with error An error occurred while sending mail: null..
    Call report via Oracle form with destype=mail, desformat=PDF and [email protected]
    Log file: rwserver_diagnostic.log
    [2012-05-13T17:04:39.273+03:00] [WLS_REPORTS] [INCIDENT_ERROR] [REP-50152] [oracle.reports.server] [tid: 16] [userId: <anonymous>] [ecid: 0000JT6ULwsATOG6yz6iMG1Ffvn4000000,1:18567] [APP: reports#11.1.2] REP-50152 : An error occurred while sending mail: null. [[
    oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
         at oracle.reports.utility.Utility.newRWException(Utility.java:1053)
         at oracle.reports.server.MailService.send(MailService.java:588)
         at oracle.reports.server.DesMail.sendFile(DesMail.java:186)
         at oracle.reports.server.Destination.send(Destination.java:578)
         at oracle.reports.server.JobObject.distribute(JobObject.java:2041)
         at oracle.reports.server.JobManager.updateJobStatus(JobManager.java:2763)
         at oracle.reports.server.EngineCommImpl.updateEngineJobStatus(EngineCommImpl.java:154)
         at oracle.reports.server.EngineCommPOA._invoke(EngineCommPOA.java:94)
         at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:637)
         at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:189)
         at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1682)
         at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1540)
         at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:922)
         at com.sun.corba.se.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:181)
         at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:694)
         at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.dispatch(SocketOrChannelConnectionImpl.java:451)
         at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.doWork(SocketOrChannelConnectionImpl.java:1213)
         at com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.performWork(ThreadPoolImpl.java:471)
         at com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:500
    Able to print report via Oracle form with destype=CACHE, desformat=PDF.
    Mail Server Parameters are defined.
    EM > Reports Application Basic Configuration > Mail Server Parameters
    Mail Server, Mail Server Port, Mail Server Username, Mail Server Password Key.
    Environment:
    Server Side:
    Oracle Linux 5
    Oracle Weblogic Server 10.3.6
    Oracle FMW Forms and Report 11.1.2
    Configure: In-Process Report Server
    Client Side:
    Window 7

    Now, reported issue is resolved, able to send report when destype=mail
    Go to EM > Report Server > Administrator > Advanced Configuration:
    Under this section "Reports Pluggable Destinations" add
    New Destination Name: mail
    Class: oracle.reports.server.DesMail

  • OPMN Can't Find In-Process Reports Server

    Hi,
    OracleAS 10g (9.0.4.2), Middle-tier, BI_Forms installation.
    When I attempt to restart the in-process Reports server with Enterprise Manager 10g (9.0.4), I get the following error:
    An error occurred while restarting "Reports Server: rep_204".
    An error occurred while talking to OPMN. Could not find entity for "rep_204".
    However, if I restart the OC4J_BI_Forms component, the in-process Reports server restarts normally.
    I removed the <security></security> tags and the "securityId=" from the job tags in the Report server's .conf file per Oracle Note:210224.1. I also changed SINGLESIGNON=YES to SINGLESIGNON=NO in the rwservlet.properties file. No other configuration chages have been made - this is fresh middle-tier install. Our application does not use Single Sign-On (which is enabled by default for Reports servers).
    I know in-process Reports servers exist in the OC4J_BI_Forms instance, but is it possible to restart them without restarting OC4J? Or is the inclusion of a "Restart" button on the in-process Reports server's control page just one of those "to be added" features?

    Hi Evris,
    REP-50125 : java.lang.StringIndexOutOfBoundsException: String index out of range: -1
    Follow the below metalink id
    Start Report Server Failed, Javalang String Indexoutof Boundexception Rep-50125 [ID 372362.1]
    Hope this will be helpful,
    Regards,
    Fabian

  • Error Message: The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. The request failed with HTTP status 404: Not Found.

    I have a web page that contains a ReportViewer control.  I am trying to display a report, which is an .rdl file located on the SSRS server, in this ReportViewer control.  I have set the ReportPath and ReportServerUrl correctly.  I am
    getting an error message.
    Am I suppose to use an .rdlc file rather than a .rdl file?  Does the web server configuration need to use a certain account?
     I am getting the following error message:
    The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
    The request failed with HTTP status 404: Not Found.

    Hi bucaroov,
    The error "The request failed with HTTP status 404: Not Found." means the ReportServerURL configured in the ReportViewer control is invalid.
    Please follow these steps to solve the issue:
    Logon the Report Server machine.
    Open the Reporting Services Configuration Manager.
    Copy the Report Server URL from 'Web Services URL'.
    Logon the application server(in this case, it is the server that host the web page), check if we can use the URL we got from step 3 to access the Report Server. If so, please replace the ReportServerURL in the ReportViewer control with this URL. If it is
    not available, could you please post the error message.
    Additionaly, we don't need to provide the extension for a server report. The ReportPath should be like: /<reports folder>/<report name>
    For more information, please see:
    Walkthrough: Using the ReportViewer Control in Remote Mode:
    http://msdn.microsoft.com/en-us/library/ms251669(VS.80).aspx
    If you have any more questions, please feel free to ask.
    Thanks,
    Jin Chen
    Jin Chen - MSFT

  • Bpel process manager server failed thru JDEV-10.1.3.4

    All,
    soa Version: 10.1.3.4
    I created application server successfully, but when i try to create integration server from jdev I got the error as bpel process manager server failed. I checked my DB is up, as some blog says hw_services should be up(i made it up), but still I couldn't create the integration server!!
    What could be the other issues?
    thanks
    sen

    Hi',
    When you are making the Integration server connection in Jdev, in step 2 use port 80, it is by default 8080, this worked for me before, give it a try.
    -Yatan

  • Oracle 9i Report Server Failed to start

    Hi,
    My Oracle 9i Report Server Failed to start, I think it is due to patch problem with OS
    It was workin fine before we upgraded patch to Sun Solaris Machine.
    Now the Patch set In my OS is
    The patched installed are as follows
    112138-01 Synopsis: SunOS 5.8:: usr/bin/domainname patch
    108652-98 X11 6.4.1: Xsun patch
    108921-25 CDE 1.4: dtwm patch
    108940-72 Motif 1.2.7 and 2.1.1: Runtime library patch for Solaris 8
    OS: SunOS 5.8 Generic_117350-37 sun4u sparc SUNW, Ultra-4
    When i try to start the application Server it shows the below error pls Help.
    ......Starting Oracle HTTP Server.....
    ADMN-100999
    ......Started Oracle HTTP Server.....
    ......Started OC4J instance.....
    ADMN-100999
    ......Started OC4J instance.....
    .....Checking OHS and OC4J status.....
    ADMN-100999
    See base exception for details.
    Base Exception:
    oracle.ias.repository.schema.SchemaException:Unable to connect to Directory Server:javax.naming.CommunicationException: it15242.chennai.ford.com:4032 [Root exception is java.net.ConnectException: Connection refused]
    See base exception for details.
    .....PRESS ENTER TO CONTINUE.......
    ......Starting Web Cache...........
    Oracle9iAS Web Cache, Version 9.0.2.0.0
    Copyright: Oracle Corporation, 1999-2001
    Build CALYPSO_9.0.0_SOLARIS_020411
    Admin Server failed to start
    ......Started Web Cache...........
    .....PRESS ENTER TO EXIT.......
    Please Help me out to solve this issue.

    I am assuming you are using 9iR2:
    1. start your infrastructure database
    2. start oid
    nohup oidmon start
    nohup oidctl server=oidldapd configset=0 instance=1 start
    3. check to see if things seem to be working properly in the infrastructure before starting the midtier
    dcmctl getstate -v (this will give you the status of the infrastructure components). If this comes back in error, you will need to solve this first.

  • Report server failed service specific error 186

    Gurus!
    I am using oracle 9iAS enterprise,
    Report server failed service specific error 186
    Kindly help!

    I believe you'll need to edit your tnsnames.ora file located in \ORACLE\806\NET80\ADMIN. The last line of this file should read something like
    Rep60_SYSNAME, Rep60_SYSNAME.world = (ADDRESS=(PROTOCOL=tcp) (HOST=SYSNAME) (PORT=1949))
    where SYSNAME is the name of the PC Reports is installed on.
    I had this same error, and once I modified this file, everything seemd to work fine.
    Good Luck
    [email protected]

  • The Report Server Failed Error in Crystal Report

    Dear All,
    I converted one PLD to Crystal Report using the Crystal Converter tool in SAP B1 8.81 Pl00. However, when I try to preview the Crystal Report, I am getting an error "The Report Server Failed" and then SAP hangs.
    Any known solution for this?
    Thanks and regards,
    Bharath S

    Dear Bharath,
    Your PL is too low. Upgrade to the latest PL will solve this problem.
    Thanks,
    Gordon

  • Starting Up In-Process report server.

    There's a way to automatically starting up the in-process report server when i start standalone report server from Windows services or simply starting up the in-process report server from Windows command line?
    I have created the "beasvc <DOMAIN>_WLS_REPORTS" service but when i reboot my application server i can't run reports until launch the URL:
    http://<IP>:<PORT>/reports/rwservlet/showenv
    or
    http://<IP>:<PORT>/reports/rwservlet/startserver
    Thank you
    Bye
    Edited by: user10834776 on 13-apr-2012 3.11

    There's a way to automatically starting up the in-process report server when i start standalone report server from Windows services or simply starting up the in-process report server from Windows command line?
    I have created the "beasvc <DOMAIN>_WLS_REPORTS" service but when i reboot my application server i can't run reports until launch the URL:
    http://<IP>:<PORT>/reports/rwservlet/showenv
    or
    http://<IP>:<PORT>/reports/rwservlet/startserver
    Thank you
    Bye
    Edited by: user10834776 on 13-apr-2012 3.11

Maybe you are looking for

  • Major Problem with audio from Final Cut to DVd Studio Pro

    I am posting this problem again because no further responses have been received regarding my first post. I purchased an MR-HD100 Firestore device from Focus Enhancements. When I use clips from it alone or with other clips created by digitizing from m

  • HT4285 move music from my computer to iphone

    I have an iphone 4s.  I have a pc.  I had an adroid and easily copied the music from it to my computer.  now I want to put that music on my iphone.   I cannot figure this out.  I downloaded the itunes to my computer but the screen does not have the c

  • FCP 6 Export Timecode Errors?

    Going on two days trying to edit a "simple" 60 second video and I've reached the saturation point. I've searched the forum, but was unable to come across anything related to what I'm seeing. Hopefully, someone will have encountered it before. I'm sta

  • Support for jinitiator 1.1.8.16

    Is Oracle planning to cut off support for jinitiator versions 1.1.8.16 upon launching oracle 12G ? Our oracle application is based on thie version of jinitiator and I need to know this information so that I can consider upgrading to jinitiator 1.3. A

  • Latest update crashed & restore won't accept my ID?

    Hi, I've been on IOS7 for a few months now. Itunes just notified me of an update so I went ahead and did the download as usual now all **** has broken loose! An error occured on the upgrade and couldn't complete the reboot so now I have to restore. N