Bind variable problem when renaming page items?

APEX 2.1 on IE6.
I'm having trouble with bind variables. I cannot reproduce this regularly, but I notice it from time to time. Basically, certain page items will simply refuse to hold their contents, even though the debug output says :
0.03: Saving g_arg_names=P9_XYLOPHONE_XYLOPHONE and g_arg_values=hello
0.03: ...Session State: Save "P9_XYLOPHONE_XYLOPHONE" - saving same value: "hello"
Whenever I reference the variable (using :, V(), NV(), or &.) I get NULL. None of the output indicates that it was changed elsewhere. I've noticed that changing the name of page item influences this. Shorted names tend to cause fewer problems.
I can't be more specific, as I can't figure out the pattern. Has anyone else noticed this?
Cheers.

hi dccase
couldnt get what the documentation says with APP_SESSION to work.
http://aae18331:8089/apex/f?p=102:3:$APP_SESSION.::3:MY_ITEM:315
However the following which i guess assumes the default session worked
=====================================================
http://aae18331:8089/apex/f?p=102:3::::3:MY_ITEM:315
cheers
shaunak

Similar Messages

How to display the current name when renaming Finder item

Is there any way to get Automator to display the current name of a Finder item when renaming an item?
I want my users to be able to copy and rename a folder template but I want to display the folder template's current name as a default in the renaming dialogue window, so the user follows the correct naming format.

Since you've already hacked into it, if you've got developer tools installed, it is most likely in the nib file that is in the English project folder in the Resources.
I don't know what further implications that will have on the app in general, though.
If you are a little adept at applescript, you may want to create your own Applescript Studio app to do this instead of Automator. Also, take a look at Platypus to make a wrapper around you applescript instead of AS Studio.
Message was edited by: Barney-15E

Bad Bind Variable Problem

Hi
I am trying to create a trigger and facing Bad Bind Variable problem.
Plz let me know, what's the problem in this trigger.
CREATE OR REPLACE TRIGGER Tender_tax_update AFTER
INSERT
OR UPDATE
OR DELETE OF ITEM_QTY,ITEM_RATE,TENDER_ACC_QTY ON TENDER_ENQUIRY_ITEM_D REFERENCING OLD AS OLD NEW AS NEW FOR EACH ROW
Declare
     v_amt TENDER_VENDOR_TAX_D.TAX_AMOUNT%TYPE;
     v_tax_ty TENDER_VENDOR_TAX_D.TAX_TYPE%TYPE;
     v_tax_cd TENDER_VENDOR_TAX_D.TAX_CODE%TYPE;
     v_ven_cd TENDER_VENDOR_TAX_D.VENDOR_CODE%TYPE;
     v_item_cd TENDER_VENDOR_TAX_D.item_cd%TYPE;
     v_tenno TENDER_VENDOR_TAX_D.tender_enquiry_no%TYPE;
Begin
     if inserting then
          v_tax_ty:=:new.TAX_TYPE;
          v_tax_cd:=:new.TAX_CODE;
          v_ven_cd:=:new.vendor_code;
          v_item_cd:=:new.item_cd;
          v_tenno:=:new.tender_enquiry_no;
select TAX_AMOUNT into v_amt from TENDER_TAX_DETAILS where tender_enquiry_no=v_tenno and TAX_CODE=v_tax_cd and TAX_TYPE=v_tax_ty and item_cd=v_item_cd and vendor_code=v_ven_cd;
update TENDER_VENDOR_TAX_D set TAX_AMOUNT=v_amt where tender_enquiry_no=v_tenno and TAX_CODE=v_tax_cd and TAX_TYPE=v_tax_ty and item_cd=v_item_cd and vendor_code=v_ven_cd;
     end if;
End Tender_tax_update;
Database deails are as follows:
TENDER_VENDOR_TAX_D
Name Null? Type
TENDER_ENQUIRY_NO NOT NULL VARCHAR2(8)
VENDOR_CODE NOT NULL VARCHAR2(4)
TAX_CODE NOT NULL VARCHAR2(4)
PERCENTAGE NUMBER(5,2)
TAX_AMOUNT NUMBER(15,2)
ITEM_CD NOT NULL VARCHAR2(10)
TAX_FLAG VARCHAR2(1)
TAX_TYPE CHAR(3)
TENDER_TAX_DETAILS
Name Null? Type
TENDER_ENQUIRY_NO NOT NULL VARCHAR2(8)
VENDOR_CODE VARCHAR2(4)
ITEM_CD VARCHAR2(10)
TAX_CODE NOT NULL VARCHAR2(4)
TAX_TYPE CHAR(3)
TAX_AMOUNT NUMBER
Message was edited by:
user648065

facing Band Bind Variable problem.Doesn't the error message tell you which bind variable is the problem?

Oracle Discoverer very slow when switching page items

Hi guys,
I'm working on a report(Discoverer Plus) which returns some product information. Parameters are a product id or a product name.
The report has three page items.(typically these would have between 3 and 10 entries in each).
If I run the report for our busiest product id the report completes in about 5secs.
If I then chose something from the page item the report can then take up to 20mins to complete, doesn't seem to matter what I pick.
I notice that if I instead refresh the report and enter a product id with little data, change the page items there and then refresh and enter the the product id of our busiest product that the report will complete in about 5secss, returning the same data as the report that will take 20 mins.
I am new to Discoverer and have discussed this with some colleagues but they are not sure, so I'm left scratching my head.
So I'd appreciate any insight that peeps might have in to this.
I would have thought that once I enter a product ID all data is returned from the DB and indexed for page items, I just can't see what Discoverer is doing for 20 odd mins.
Yours confused!
David

Hi Rod,
I had the Discovery admin check oem and he can see that when the page item is selected that the cpu is busy processing the data for the 15-20 mins, no additional call is made to the database.
I installed Discovery Desktop today and the same report changes tabs almost instantaneously through it, so I'm left scratching my head.
I do see occasional warnings about low heap memory on the AS but on Discovery Desktop with even a 15k memory cache the report only took a few seconds to switch pages.
The admin has advised to raise an SR with Oracle but I'd be interested in any areas to check.
Edited by: dobrien_ie on Jun 1, 2012 3:40 PM

Query Bind Variables problem

I have a ViewObject with bindvariable GroupnameItemname.
In JHeadstart AppDef this item is not bound to model, but included in Quick Search and Advanced Serach, as in "7.2.5. Using Query Bind Variables in Quick or Advanced Search"
First I get an error saying GroupnameItemname*Var* is not found on ViewObject, so I changed the bindvariables to GroupnameItemnameVar
Is something changed here? We are using JHeadstart 10.1.3.3.75 / JDeveloper 10.1.3.4.0
After changing the bindvariablename I have another problem:
I get an error in JhsApplicationModuleImpl.advancedSearch on these lines:
boolean isBindParam = !viewCriterium.isAttributeBased();
AttributeDef ad = isBindParam ? null : vo.findAttributeDef(attribute);
The first line returns false for my bindvariable, so the second line raises an error like "JBO-25058: Definition <attr> of type Attribute not found in <VO>".
In QueryCondition:
public boolean isAttributeBased()
return def!=null; //but def is not null here, it is an instance of DCVariableImpl
This used to work in previous versions of JHeadstart...
Please help,
Greetings HJH

In my MyApplicationModuleImpl (which extends JhsApplicationModuleImpl) I did override advancedSearch.
Copied the code from JhsApplicationModuleImpl and changed a few lines:
After
sLog.debug("executing advancedSearch for " + viewObjectUsage);
ViewObject vo = getViewObject(viewObjectUsage);
I added:
//clear bindParams:
String[] attrNames =
vo.getNamedWhereClauseParams().getAttributeNames();
for (int i = 0; i < attrNames.length; i++) {
vo.setNamedWhereClauseParam(attrNames\[i\], null);
sLog.debug("bindParam leeggemaakt: " + attrNames\[i\]);
And a bit later in the method I made a changed as follows:
// boolean isBindParam = !viewCriterium.isAttributeBased();
boolean isBindParam = viewCriterium.getName().endsWith("Var");
A bit crude, but worked for me...
Cheerio,
HJH
Edited by: HJHorst on Mar 19, 2009 1:56 PM (had to escape square brackets...)

Bind variable problem in cascading LOVs

Hi,
after upgrade from APEX 3.0 to 3.1 all my cascading LOVs stopped working correctly. First level LOV is OK, but the second level LOV, which contains a bind variable in its SQL code, fails. Debugging shows that the bind variable referrencing to the value of the first level LOV is empty. It has worked without problems in 3.0. The bind variable format is traditional :ITEM
This is an example of the LOV SQL:
SELECT PSKUP_CZ display_value, ID return_value
FROM PSKUP
WHERE sk_id = :P1_SKUP
ORDER BY 1
Where :P1_SKUP refers to the vaule of the top level LOV.
In Oracle® Database Application Express Release Notes Release 3.1 in chapter "3 Open Bugs and Known Issues", I've only found a short remark called "Problems with Queries Containing a Bind Variable and a String with Two Dashes". The recommended solution here was to use v('P18_X') instead of :P18_X
I tried that but with no effect on my problem.
Anybody has similar experience? Any workarounds?
Thanks in advance,
Zdenek

Hi Zdenek,
DV, NV, V are an optional component of the ApexLib framework. Actually they don't have anything to do with the framework itself.
Because of the nature of this functions they have to have a hard coded reference to the FLOWS_XXX schema, but which causes problems if APEX is upgraded to a new version and the functions are not altered.
I will probably removed them from the installation instructions or add a big remark that they have to be altered after an upgrade, because this kind of threads are re-occurring after each new released APEX version.
Thanks
Patrick
My APEX Blog: http://inside-apex.blogspot.com/
The APEX Builder Plugin: http://builderplugin.oracleapex.info/ New
The ApexLib Framework: http://apexlib.sourceforge.net/

Can not Update/Execute Bind Variable in af:Table or items

Hi Experts,
it will be very helpfull if any one can help me regarding following issues.
I am using JDeveloper/ADF11g . created af:Table in jsx page and want to be executed by passing/assigning Bind Variable as runtime backing bean by any event or during form loading event.
I had write code as below to execute , it works error free but not execute in af:Table .
Please HELP me.
public void mtBindAss() {
    String amDef = "CPS.model.CPSAppModule";
    String config = "CPSAppModuleLocal";
    ApplicationModule am =
      Configuration.createRootApplicationModule(amDef, config);
    ViewObject vo = am.findViewObject("EmpBranchView1");
    // Set the two design time named bind variables
   //vUSERID is Bind variable
    vo.setNamedWhereClauseParam("vUSERID", null);
    vo.setNamedWhereClauseParam("vUSERID", "value");I have tried to execute by this way
    vo.executeQuery();// it returns executed amount of row counted value
    System.out.println("Executed Row"+vo.getRowCount());Also I have tried to execute by this way
    oracle.binding.BindingContainer bc;
    bc = BindingContext.getCurrent().getCurrentBindingsEntry();
    OperationBinding op = bc.getOperationBinding("Execute");
    op.execute();
}VO query
SELECT VwEmpbank1.ADDR1,
       VwEmpbank1.BANK_NO,
       VwEmpbank1.BRANCH_NAME,
       VwEmpbank1.ROWID,
       VwEmpbank1.RT_NO,
       VwEmpbank1.USER_ID
FROM VW_EMPBANK VwEmpbank1
WHERE USER_ID=:vUSERIDThanks.
zakir
=======
Edited by: Zakir Hossain on May 14, 2009 11:21 AM

Zakir,
Some brief comments:
1). Doing this via the binding layer is the "better" way if you can (instead of instatiating an AM like that). However, you need to create a binding for ExecuteWithParameters, not Execute. If you're not able to specify the actual parameter values in the pagedef, you can also get the parameter map from the operation binding and set the values that way.
2). If you want the query to execute on page load, you can create an invokeAction binding in the page definition to invoke the ExecuteWithParameters action. Just set the proper refreshCondition.
Hope this gets you going in the right direction.

Bind Variable Problem

Hi Guys
PLease i am really stuck
i have a LOV which has a complex query...
in that query there are multiple bind variables that are assigned... ie :1 , :2 and so forth
here is the query for the LOV
SELECT a.kri_description, a.kri_id
FROM xx_key_result_indicators a, xx_kri_positions b
WHERE TO_DATE (:1, 'DD-MON-YYYY') BETWEEN a.effective_from_date
AND a.effective_to_date
AND TO_DATE (:2, 'DD-MON-YYYY') BETWEEN b.effective_from_date
AND b.effective_to_date
AND a.kra_id = :3
AND a.kri_id IN (
SELECT c.kri_id
FROM xx_kri_positions c
WHERE TO_DATE (:4, 'DD-MON-YYYY')
BETWEEN c.effective_from_date
AND c.effective_to_date
AND c.position_id = :5
AND c.enable_flag = 'Y')
AND b.position_id = :6
AND a.enable_flag = 'Y'
AND b.enable_flag = 'Y'
AND a.kri_id NOT IN (SELECT NVL (g.kri_id, 1)
FROM xx_perf_kri g
WHERE g.perf_kra_id = :7)
UNION
SELECT f.kri_description, f.kri_id
FROM xx_key_result_indicators f
WHERE TO_DATE (:8, 'DD-MON-YYYY') BETWEEN f.effective_from_date
AND f.effective_to_date
AND f.kra_id = :9
AND f.kri_id NOT IN (SELECT e.kri_id
FROM xx_kri_positions e)
AND f.enable_flag = 'Y'
AND f.kri_id NOT IN (SELECT NVL (d.kri_id, 1)
FROM xx_perf_kri d
WHERE d.perf_kra_id = :10)
so in theroy when i push the tourch icon next to my text field i set these bind variables...
so in theroy that should work,,, but becuase i have a lov the framework will automatically assign extra where clause params for the filter.... and the query will look as follows
SELECT *
FROM (SELECT a.kri_description, a.kri_id
FROM xx_key_result_indicators a, xx_kri_positions b
WHERE TO_DATE (:1, 'DD-MON-YYYY') BETWEEN a.effective_from_date
AND a.effective_to_date
AND TO_DATE (:2, 'DD-MON-YYYY') BETWEEN b.effective_from_date
AND b.effective_to_date
AND a.kra_id = :3
AND a.kri_id IN (
SELECT c.kri_id
FROM xx_kri_positions c
WHERE TO_DATE (:4, 'DD-MON-YYYY')
BETWEEN c.effective_from_date
AND c.effective_to_date
AND c.position_id = :5
AND c.enable_flag = 'Y')
AND b.position_id = :6
AND a.enable_flag = 'Y'
AND b.enable_flag = 'Y'
AND a.kri_id NOT IN (SELECT NVL (g.kri_id, 1)
FROM xx_perf_kri g
WHERE g.perf_kra_id = :7)
UNION
SELECT f.kri_description, f.kri_id
FROM xx_key_result_indicators f
WHERE TO_DATE (:8, 'DD-MON-YYYY') BETWEEN f.effective_from_date
AND f.effective_to_date
AND f.kra_id = :9
AND f.kri_id NOT IN (SELECT e.kri_id
FROM xx_kri_positions e)
AND f.enable_flag = 'Y'
AND f.kri_id NOT IN (SELECT NVL (d.kri_id, 1)
FROM xx_perf_kri d
WHERE d.perf_kra_id = :10)) qrslt
WHERE (( UPPER (kri_description) LIKE :1
AND ( kri_description LIKE :2
OR kri_description LIKE :3
OR kri_description LIKE :4
OR kri_description LIKE :5
not that now there are bind variable 1 through to 10 and then 1 through to 5...
the error i am getting is not all variables bound exception..
please if anyone could help....
Thanks

I am new to OA Fwk, but I am Expert of java, J2EE.
My solution will work fine in pure java.
I am sure same should work in OA also.
But I never experimented it. Give it a try
Lets take a select query:
select my_col from my_table where clo1 = :1 and col2 = :1
In this query there is only one bind varible ":1" in the world of PL/SQL.
But for there are two bind varibales you need to set them two times.
in java you will do
stmt.setString(1, myval);
stmt.setString(2, myval);
Now coming to your query.
It has 10 +5 total 15 bind variables and you need to set 15 but not 10.
For all practicle purposes assume that :1 or :2 or :3 is equivalent to ?
Thus your select query is equivalent to
SELECT *
FROM (SELECT a.kri_description, a.kri_id
FROM xx_key_result_indicators a, xx_kri_positions b
WHERE TO_DATE (?, 'DD-MON-YYYY') BETWEEN a.effective_from_date
AND a.effective_to_date
AND TO_DATE (?, 'DD-MON-YYYY') BETWEEN b.effective_from_date
AND b.effective_to_date
AND a.kra_id = ?
AND a.kri_id IN (
SELECT c.kri_id
FROM xx_kri_positions c
WHERE TO_DATE (?, 'DD-MON-YYYY')
BETWEEN c.effective_from_date
AND c.effective_to_date
AND c.position_id = ?
AND c.enable_flag = 'Y')
AND b.position_id = ?
AND a.enable_flag = 'Y'
AND b.enable_flag = 'Y'
AND a.kri_id NOT IN (SELECT NVL (g.kri_id, 1)
FROM xx_perf_kri g
WHERE g.perf_kra_id = ?)
UNION
SELECT f.kri_description, f.kri_id
FROM xx_key_result_indicators f
WHERE TO_DATE (?, 'DD-MON-YYYY') BETWEEN f.effective_from_date
AND f.effective_to_date
AND f.kra_id = ?
AND f.kri_id NOT IN (SELECT e.kri_id
FROM xx_kri_positions e)
AND f.enable_flag = 'Y'
AND f.kri_id NOT IN (SELECT NVL (d.kri_id, 1)
FROM xx_perf_kri d
WHERE d.perf_kra_id = ?)) qrslt
WHERE (( UPPER (kri_description) LIKE ?
AND ( kri_description LIKE ?
OR kri_description LIKE ?
OR kri_description LIKE ?
OR kri_description LIKE ?)))
you need to set the values in the order in which bind varibale appear in select query

Bind Variable popup when no bind variable declared

I am writing a fairly complex SQL (FYI, I want to keep this all in one step and not split out with multiple sub-selects) and I am getting the bind variable popup and an error message ("The requested URL /apex/wwv_flow.show was not found on this server ") and I am not sure why and could definitely use some help. From what I see there is no issue with the SQL syntax written and when I try to break it down, everything goes well until the point where I write a case statement with an OR and checking for 'BLOCK'.
The issue comes when using the bolded line.
I am using "10g Release 2 (10.2)" and querying from the SQL commands area inside it.
The goal is to identify the area of the court broken down by the x and y dimension, home and away team has different logic to be used and if it is a block there is different logic.
Your help would be greatly appreciated, and I am leaning towards it is a bug in the SQL Commands section of the tool:
The full query is below:
case when E.YEAR IS NOT NULL then
*(case when x_dimension < 12.5 then 'A' when x_dimension <= 25 then 'B' when x_dimension < 37.5 then 'C' else 'D' end ||*
case when ((a.action_team=c.awayname3 and A.ACTION_TYPE = 'BLOCK') or (a.action_team=c.homename3 and A.ACTION_TYPE <> 'BLOCK')) then (case when y_dimension < 9.5 then '4' when y_dimension <= 19 then '3' when y_dimension < 28.5 then '2' when y_dimension <= 38 then '1' else '0' end) else (case when y_dimension > 84.5 then '4' when y_dimension >= 75 then '3' when y_dimension < 65.5 then '2' when y_dimension <= 56 then '1' else '0' end) end) else 'NA' end as COURT_LOC
It would not allow to enter the full SQL but please know that there is no issue with any declaration of the columns.
Edited by: user10615520 on Feb 29, 2012 10:29 AM
It seems that it is an issue with the in house SQL client of XE as I downloaded SQL Developer and ran same query there and the result was no issues. Is anyone aware of a bug for something like this?
Edited by: user10615520 on Feb 29, 2012 10:43 AM

So I am running Oracle Database Express version 10g. When you login through the default web interface, there is a SQL command line option. When I utilize the SQL below, can't insert whole SQL statement for some reason it won't let me, in that SQL command line I get a pop up window asking about values for bind variables... But as you can see from the code below there is no declaration of a bind variable. I also get the error message from the original post.
When I use the same query in Oracle SQL Developer, not express (mistake in previous note), the query runs without any issues.
My question is if anyone is aware of the oracle database express sql command line module having a bug where this is occurring. When I remove the line below from the query it runs fine in the Oracle Database Express command line module.
Thank you for your help, I hope this is clear.
case when E.YEAR IS NOT NULL then
(case when x_dimension < 12.5 then 'A' when x_dimension <= 25 then 'B' when x_dimension < 37.5 then 'C' else 'D' end ||
case when ((a.action_team=c.awayname3 and A.ACTION_TYPE = 'BLOCK') or (a.action_team=c.homename3 and A.ACTION_TYPE <> 'BLOCK'))
then
(case when y_dimension < 9.5 then '4' when y_dimension <= 19 then '3' when y_dimension < 28.5 then '2' when y_dimension <= 38 then '1' else '0' end)
else
(case when y_dimension > 84.5 then '4' when y_dimension >= 75 then '3' when y_dimension < 65.5 then '2' when y_dimension <= 56 then '1' else '0' end)
end) else 'NA' end as COURT_LOC

Problem when renaming iPhoto Library

I recently renamed two iPhoto Libraries. A day later I plugged in my external HDD to do a Time Machine (TM) backup and noticed that TM deleted ALL my previous backups except the last one, stating there was not enough space.
My conclusion is that renaming these libraries caused TM to see them as NEW libraries and wanted to back them up all over again, meaning I needed 40GB of space rather than the 15GB available and let to the deletion of all my previous backups (without warning)!
I have posted about this in the TM forum, but decided to mention it here as well to warn others of this potential problem.

problem when copying iphoto library from ext hd to ext hd. stops after 2 gb saying there was data with same name on target hd. but that one is brandnew and freshly formatted.
How are your external HDs formatted? Both need to be formatted MacOS Extended (Journaled, not case sensitive) to work with iPhoto.
If the file system differ, you may have problems with ambitious filenames, for example, if one drive is case sensitive and the other not.

Bind variable problem in a procedure

Hi,
Is there any way I can pass a parameter in a procedure as we do in sql plus (for example where date = &date).
I have a procedure that is somewhat similar to this...
select (field 1, field2...
from table1, table 2....
where ....
and ..
and v_fiscal_year (here I want the bind variable)
UNION
select (field 1, field2...
from table1, table 2....
where .....
and ..
and ..
and v_fiscal_year (here I want the bind variable)
I need to register this procedure in oracle apps as a concurrent program where a user should be able to provide value for fiscal_year and then write the file out in a text file.
Thanks
A/A

What you've shown isn't a procedure, but is a query.
I assume your "field1", "field2" within the query means that you are expecting to be able to create a dynamic SQL from parameters passed into a procedure.
For that you will need to use DBMS_SQL package to create and execute a dynamic query or use the EXECUTE IMMEDIATE statemetn to execute a query built up in a string. Note however, that dynamic SQL is inherently bad practice and should only ever be used as a last resort. What exactly are you trying to achieve as there are likely to be better ways of doing it?

User Report data bind variable problems

Hello,
I am trying to build a simple report in SQLDeveloper, using a DATE bind variable. But it fails with the error message:
Inconsistent datatype, expected DATE got NUMBER
SELECT * FROM FLOW_COMP_REC_SUMMARY_RU
where create_date = trunc(:TARGET_DATE)
and type = 'D'
ORDER BY MESSAGE_FLOW_ID
Running this query in SQLDeveloper worksheet executes properly after a dialog box pops up and I enter: current_date - 1
SELECT * FROM FLOW_COMP_REC_SUMMARY_RU
where create_date = trunc(&TARGET_DATE)
and type = 'D'
ORDER BY MESSAGE_FLOW_ID
I've searched but no clear solutions present themselves. If you have one it would be most appreciated.
Thanks

You'll have to convert the input to date yourself:
SELECT * FROM FLOW_COMP_REC_SUMMARY_RU
where create_date = TO_DATE(:TARGET_DATE, 'DD/MM/YYYY')
and type = 'D'
ORDER BY MESSAGE_FLOW_ID
Have fun,
K.

Recalculating fields in an updateable report when a page item changes

Hi,
On the one page I have a header section where the user enters the total number of items (eg. 50).
I then have an updateable report on the same page where one of the columns is '% of the total items' and the last column of the table is calculated using javascript ('% of the total items' * 'total number of items').
eg. the page could look like this :
Total Number of Items : 200
Item Type % of Total Items Calculated Field
Toys 25% 50
Clothes 75% 150
When the value of the 'Total Number of Items' field is changed, I need to recalculate all the values for the last column.
I've tried to do this using javascript based on what I could find on the forum, but when I change the value in the header section, the last column of all the table rows are not being calculated.
Any assistance you could provide would be greatly appreciated.
I have an onchange trigger on the total number of items field
onChange="ReCalcProds()";
and the javascript function looks as follows :
function ReCalcProds()
var answer;
var amount1;
var amount2;
var tds = document.getElementsByTagName('td');
for (var k=0; k<tds.length; k++) {
if (tds[k].headers=="ACTIVITY_CODE") {
var inputObjs= tds[k].getElementsByTagName('input');
if(inputObjs.length>0) {
for (var j=0;document.inputObjs.length; j++) {
amount1 = parseFloat(document.getElementById('P9_TOTAL_PRODUCTIONS').value);
amount2 = parseFloat(document.getElementById('f08_'+j).value);
if (isNaN(amount1)){amount1 = 0};
if (isNaN(amount2)){amount2 = 0};
answer = amount1 * (amount2/100);
document.getElementById('f11_'+j).value = answer;
Many Thanks.

anonymous,
Check out another thread that had a similar topic. It may help you work through your issue.
Re: Tabular Form - Dynamic Default Value
Todd

Problems when viewing page in IE but not in Firefox - Help

Please help! I'm new to using tables in Dreamweaver. I built my page in Photoshop, sliced it and then opened it in Dreamweaver. It looks fine on my Mac but when viewed on a PC in IE it appears as though there are lines or gaps between the cells of my table. How do I fix this? How can I make sure this doesnt happen again? For reference, the problem can be viewed here: http://www.amscattle.com
Thank you for any and all help!
SC

Please help! I'm new to using tables in Dreamweaver. I built my page in Photoshop, sliced it and then opened it in Dreamweaver.
Bad news - that action alone accounts for some significant percentage of the posts here on the forum. The truth of the matter is this - the code that any graphics application writes is not usable for anything other than rapid prototyping. This means it's not suitable for any production work. Read this to discover one of the several reasons why that is the case -
http://www.apptools.com/rants/spans.php
Your gaps are a definitive proof of the brittleness of such table layouts.
A much better approach would be to use a graphics application for what it does best - make graphics. Build the page in DW. Read this to see a suggested method - http://www.apptools.com/examples/pagelayout101.php

Problems when Creating Pages from Templates in Dreamweaver 8

When creating new pages from templates in Dreamweaver 8(Ver
8.0.2). The full path for images is not created
i.e. in template the code is <img src="main_page_logo.png"
width="814" height="172" longdesc="Main Page Logo" />
In the new file the code should be :-
<img src="../../Templates/main_page_logo.png" width="814"
height="172" longdesc="Main Page Logo" />
but only :-
<img src="main_page_logo.png" width="814" height="172"
longdesc="Main Page Logo" /> is in the code.
but this does work in Version 8.0.
Does anyone know of a setting or fix for this problem

> Does anyone know of a setting or fix for this problem
It was regarded as a bug in previous versions, and was fixed
in the 8.0.2
release. In normal circumstances, ALL links in a template
file must be
relative to the template document, not relative to where you
intend to save
the child pages. Thus, there would be no way to have a link
in your
template document like the first one you show, e.g.,
<img src="whatever.png"....
*unless* the file was actually in the Templates folder (a bad
idea).
In 8.0.2, you can set your PREFERENCES for the Templates
category to NOT
MANAGE relative links. Be aware that this may have unintended
consequences
for you - specifically regarding other relative links in your
site.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"pgs_it" <[email protected]> wrote in
message
news:eivj88$361$[email protected]..
> When creating new pages from templates in Dreamweaver
8(Ver 8.0.2). The
> full
> path for images is not created
> i.e. in template the code is <img
src="main_page_logo.png" width="814"
> height="172" longdesc="Main Page Logo" />
> In the new file the code should be :-
> <img src="../../Templates/main_page_logo.png"
width="814" height="172"
> longdesc="Main Page Logo" />
> but only :-
> <img src="main_page_logo.png" width="814"
height="172" longdesc="Main Page
> Logo" /> is in the code.
> but this does work in Version 8.0.
> Does anyone know of a setting or fix for this problem
>
>
>

Bind variable problem when renaming page items?

Similar Messages

Maybe you are looking for