Problems when viewing page in IE but not in Firefox - Help

Please help! I'm new to using tables in Dreamweaver. I built my page in Photoshop, sliced it and then opened it in Dreamweaver. It looks fine on my Mac but when viewed on a PC in IE it appears as though there are lines or gaps between the cells of my table. How do I fix this? How can I make sure this doesnt happen again? For reference, the problem can be viewed here: http://www.amscattle.com
Thank you for any and all help!
SC

Please help! I'm new to using tables in Dreamweaver. I built my page in Photoshop, sliced it and then opened it in Dreamweaver.
Bad news - that action alone accounts for some significant percentage of the posts here on the forum. The truth of the matter is this - the code that any graphics application writes is not usable for anything other than rapid prototyping. This means it's not suitable for any production work. Read this to discover one of the several reasons why that is the case -
http://www.apptools.com/rants/spans.php
Your gaps are a definitive proof of the brittleness of such table layouts.
A much better approach would be to use a graphics application for what it does best - make graphics. Build the page in DW. Read this to see a suggested method - http://www.apptools.com/examples/pagelayout101.php

Similar Messages

Outline of objects in photos are grainy when viewed at 16.67% but not at 25%. Messes up editing

Hello,
I have recently been having this problem where the outlines of objects in photos is grainy at certain magnifications. It only started recently and I haven't made any setting changes in Photoshop nor have I changed my monitor or video card settings. My last photos were shot with an ISO of 400. I always shoot in Raw and the photos aren't grainy in the Raw viewer. The graininess isn't only visible at 16.67% but also at 33.33%. But everything is fine at 25% and everything higher than 33.33%. The problem is just that 16.67% is the best size to use while editing the picture. The picture on the left is the same file just viewed at 16.67% while the right is viewed at 25%.
Any help would be very appreciated.
Kegren

What version of Photoshop?
If CS4 or CS5, do you have the OpenGL Drawing setting enabled (Edit - Preferences - Performance)?
-Noel

Radio Group with submit is clearing page in IE But not in Firefox

I have an incompatibility issues in an app which works correctly in Firefox but does not work in Internet Explorer for myself and other users. I have an item (Yes or No) set as a Radiogroup with Submit with the source set as only when current value in session state is null. In Firefox the value is retained, If I select Yes or No, the page does an automatic submit and the value I selected is returned correctly. However in IE, when the auto submit is done the value is set as null. What could be causing this to work correctly in Firefox and not in IE?
Edited by: Ed S on Sep 24, 2008 2:07 PM
Edited by: Ed S on Sep 24, 2008 2:08 PM

I found the problem. The items in question are in a SQL Region generated from the wizard as an SQL report. When I move these items into an HTML region it works correctly. This is an APEX bug. I also noticed Date Picker items within a report region do not work, you are unable to select the date.
Edited by: Ed S on Sep 24, 2008 4:15 PM

Crystal Report Viewer (flash based) is displaying partial of the flash interface. It is working well on Firefox 3.6.7 and below but not in Firefox 3.6.8. It is also working well on Internet Explorer and Chrome and Safari. Please check if you can advise o

Crystal Report Viewer (flash based) is displaying partial of the flash interface. It is working well on Firefox 3.6.7 and below but not in Firefox 3.6.8. It is also working well on Internet Explorer and Chrome and Safari. Please check if you can advise on this problem we are facing. Thank you.
== This happened ==
Every time Firefox opened
== Crystal Report Viewer (flash based) is displaying partial of the flash interface. It is working well on Firefox 3.6.7 and below but not in Firefox 3.6.8. It is also working well on Internet Explorer and Chrome and Safari. Please check if you can advise on this problem we are facing. Thank you. ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.0.249.78 Safari/532.5

Reset the page zoom on pages that cause problems: '''View > Zoom > Reset''' (Ctrl+0 (zero); Cmd+0 on Mac)
See [[Text Zoom]] and [[Page Zoom]] and http://kb.mozillazine.org/Zoom_text_of_web_pages
You can try if it works if you disable OOPP (Out-Of-Process-Plugins) for Flash
You can set the prefs dom.ipc.plugins.enabled.* to false on the about:config page to disable the plugin-container process.
dom.ipc.plugins.enabled (currently false by default)
dom.ipc.plugins.enabled.npswf32.dll (Flash)
To open the ''about:config'' page, type '''about:config''' in the location (address) bar and press the Enter key, just like you type the url of a website to open a website.
If you see a warning then you can confirm that you want to access that page.

I have given links on self page those links are open in IE but not in firefox why?

now I am at the coding stage & facing a problem about - I have given self page links that are open in IE6.0 but not in firefox why?
== This happened ==
Every time Firefox opened
== User Agent ==
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; InfoPath.2)

Please copy all the code in View -> Page Source to http://pastebin.mozilla.org then let us know the resulting address.

Error: Namespace prefix 'split-by-page-break' used but not declared.

I have my machine reimaged, now when I try to preview an rtf template I get the below error. Nothing has changed in my template and I am using 1.0.0 Build 9 as before my reimage as well. This is an uregent problem that I am not able to find the solution for on my own. Please advise with any help.
Caused by: oracle.xdo.parser.v2.XPathException: Namespace prefix 'split-by-page-break' used but not declared.
     at oracle.xdo.parser.v2.XSLProcessor.reportException(XSLProcessor.java:782)
     at oracle.xdo.parser.v2.XSLProcessor.newXSLStylesheet(XSLProcessor.java:564)
     ... 14 more
Thanks

I'm just new to XMLP and am receiving the same error.. My error is occuring when trying to use sub-templates in my master template.
I believe I have the syntax correct:
To import template file:
<?import:file:h:///CN_LTR_TEMPLATES.rtf?>
to call the sub-template:
<?call-template: signature:?>
Its the call-template to signature thats generating my error message.. My only thought is that its not calling my import properly..
Anyway.. Hope this might help you a bit.. you never mentioned anything about using a sub-templates. Perhaps since you formated your computer, your template may be in a different location or gone all together (that is if you are using sub-templates).
If i figure anything out in the mean time, i'll let you know..
Edited by: user8682333 on Aug 16, 2009 6:51 AM

I can view my pictures in Classmates in IE But not in firefox

I can view my pictures in Classmates in IE But not in firefox. I can vie pictures on Facebook fine. I tried every settingsuggested in help unless I missed something.

With the site that you are having problems with on display, click on the site identity button (for details on what that is see the [[site identity button]] article) and then on More Information. This will open up the page info dialog.
First select the Permissions panel, make sure that "Load Images" is set to allow (selecting Use Default should also work)
Next select the Media panel, then click on the first item in the list. Use the down arrow key to scroll through the list. If any item has the option "Block images from (domain name)" selected, de-select the option.
This should hopefully resolve your issue, but also see [[Images or animations do not show]].
Some add-ons can also block images, for example if you have AdBlock Plus installed, make sure that you have not accidentally created a filter to block the images.

Hi, i have problem when installing itune. it said: Could not open key HKEY_LOCAL_MACHINE32\SOFTWARE|Microsoft\Windows\CurrentVersion\Run. Verify that you have sufficient access to that key, or contact your support personnel. please help me!

hi,
i have problem when installing itune. it said:
Could not open key HKEY_LOCAL_MACHINE32\SOFTWARE|Microsoft\Windows\CurrentVersion\Run. Verify that you have sufficient access to that key, or contact your support personnel.
Please help me i can't do anything without itune

For "Could not open key/write value" errors when reinstalling try b noir's user tip:
"Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\
[LongStringOfLettersAndNumbers]" error messages when installing iTunes for Windows.
The technique can be applied to the branch of the registry mentioned in the error message.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

My iPad is not being recognized by the computer, therefore, cannot sync. It charges when plugged to the wall, but not when pugged to iMac.

My iPad is not being recognized by the computer, therefore, cannot sync. It charges when plugged to the wall, but not when pugged to iMac.

Most common culprits include the cable. Try swapping it out for a different one.. or not having the most recent version of itunes. I once even solved this problem by shutting down the computer for 2 minutes. (the longer the better), with the ipad plugged in. starting it up... then itunes recognizes it, launches, and syncs.
Apple has a troubleshooting assistant on this topic:
http://www.apple.com/support/ipad/assistant/itunes/
It will advise you to reboot. I recommend shutting down instead.
--Sam
P.S The ipad should charge when asleep and plugged into your Mac. The charging behavior is normal. There isn't enough power out the USB ports to charge the ipad while it is on on some older Macs and nearly all PCs.

Printer just started feeding a blank page after some, but not all printed documents

Printer just started feeding a blank page after some, but not all printed documents

Hi @cam21 ,
I understand that you are having issues printing, after some documents you are getting blank pages. I would be happy to help you.
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
What application are you printing from?
It may be a setting in the application.
Does this happen from all applications?
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. http://www.hp.com/go/tools>Using HP Diagnostic Tools for HP Printers in Windows.
How is the printer connected? (USB/Ethernet/Wireless)
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
If there is anything else I can help you with, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Safari (3.0.4) on Mac OS 10.4.11 has started quitting when viewing news and weather sites - not all sites, not the same sites every time.

Safari (3.0.4) on Mac OS 10.4.11 has started quitting when viewing news and weather sites - not all sites, not the same sites every day. Help?

Hi Gary...
I see you are running v10.4.11 and you have updated Safari but make certain all the system software is up to date by clicking your Apple menu / Software Update.
If everything is up to date, try resetting Safari from the menu bar.
Select the top 7 buttons, click Reset.
Restart your Mac. Launch Safari. Try several of the sites you mentioned.
has started quitting
If resetting didn't help, post a crash report.
If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash information.
Copy/paste the entire contents of the Crash Reporter window into your reply. If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.

Page Publishing Correctly in Safari but Not in Firefox!

Hello!
Question: When I publish my page, it looks exactly like it should in Safari but not in Firefox! Why is this and how can I correct this?
Thank you!

Hi
Please share the page url , so that we can have a look.
You can pm me the site url.
Also let me know the browser version you are using.
Thanks,
Sanjit

Cannot expand viewer for ESPN3. The task bar at the bottom is not visable. It works with Internet Explorer, but not with FireFox

There is a task bar that should be visible so you can expand the viewer to the full size of your computer screen. I can open up internet explorer and it works, but not in FireFox. This is when using ESPN3, or ESPNWATCH.

A good place to ask questions and advice about web development is at the mozillaZine Web Development/Standards Evangelism forum.
The helpers at that forum are more knowledgeable about web development issues.
You need to register at the mozillaZine forum site in order to post at that forum.
See http://forums.mozillazine.org/viewforum.php?f=25
You need to post a link to the website or post relevant parts of the code.

HT5105 I have been trying to create a multicam clip from two camera's. They sync properly when using the sync feature but not when I use the multicam feature does anyone know what I may be doing wrong?

I have been trying to create a multicam clip from two camera's. They sync properly when using the sync feature but not when I use the multicam feature does anyone know what I may be doing wrong?

Probably best if you could post screen shots of the Inspecror window in extended view with a couple of the clips you using for the 2 angles.
If you have audio from both cameras and have identified them separately, the sync is usually pretty reliable.
Russ

Printing from web pages is excruciatingly slow with most recent upgrades of Firefox .Use an iMac and an HP officejet printer. Printer works fine with Safari and woodprocessed files, but not with Firefox and web pages.

Printing from web pages is excruciatingly slow since downloading most recent upgrades of Firefox Mozilla. I have a desktop iMac, OS 10.6.8, and an HP officejet printer 4500 G510n. The printer works fine with the Safari Browser and with woodprocessed files, but not with Firefox and web pages. Help please! It used to print fast with earlier versions of Firefox.

Hello and welcome to the Apple Discussions Forum.
I have hardly any experience with HP printers but since your posting has not been replied to yet I thought I'd offer some assistance.
With the printer status and ink levels working, it shows that you have a connection to the printer. So I would look at the issue being with the protocol being used for the print queue on the Mac.
Since you have XP and Vista working, I would check the printer queue configuration on either box. In XP, go to the Properties and select Ports. Click the Configure Port tab to view the connection. If you are using RAW, then this is known as HP Jetdirect-Socket on OS X. So if you are not sure what protocol was used before I would create another printer queue, this time selecting IP > HP Jetdirect-Socket. Then enter your IP address and select the K5400dn from the Print Using menu.
If this still fails to print then please reply. There may be limitations with adding the HP driver this way that I am not aware of. There may also be other driver options you can look at, such as HPIJS. If Greg Sahli reads this posting he has expert knowledge on this matter and will be able to offer some guidance.
PaHu

Problems when viewing page in IE but not in Firefox - Help

Similar Messages

Maybe you are looking for