Binding context node to table in adobe interactive form

Hi All,
I have an interactive form with table inside that. Mapping to the row of the table is giving some error. Can anybody tell how to create a context node in wdj, so that i can map to table.
Regards
Sowmya

Hi Sowmya,
Go through the following links in order to use Table in Interactive Form:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00c4041d-188d-2910-6ea2-b4d5155f56e0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cacb9a7d-0c01-0010-1281-be4962c9ab3e
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b41fd790-0201-0010-f9ad-b4c9582a83e9
Thanks n Regards,
Jhansi Miryala

Similar Messages

Using Tables in adobe interactive form

Hi,
I am using form designer to design my PDF in webdynpro. I would like to create a table in my PDF page. But i noticed that at present the adobe standard library doesnt have a table UI. is there any way to create table indirectly in the PDF page. how the context binding should be done in this case. can some one help me with this.
Regards,
Chander

The basic layout element for creating dynamic tables in the Adobe LiveCycle Designer is a subform of type Flow Content. In the SAP environment, you should even be able to choose a special Table option as part of the Subform properties (on the Object palette). If this option doesn't appear, you probably haven't got the latest version of Designer installed. How to use a subform in general is described very well in the Designer documentation (call up from the Designer menu bar under Help).
The data binding is done as always:
1. You create your context in SAP NetWeaver Developer Studio.
2. When you launch Designer, the context appears in the Data palette. From there, drag and drop the individual nodes onto the table fields that are part of your subform.
Again, this is described in the Designer documentation.
Regards,
Markus
Markus Meisl
SAP NetWeaver Product Management

Importing internal table in Adobe Interactive Forms

Hi all,
at the moment I do my first steps in AIF.
I have created a report and select dd02l, dd03l and dd04l.
dd02l is a structure. dd03l and dd04l are internal tables.
How can I import internal tables into my function module with getting a runtime error? Fields and structures are no problem?
I have defined both internal tables as importing parameter in my form interface because I cannot define internal tables ;o(
Thx 4 help & regards
Michael

hi,
find attached document it will helpful for u go to link
1.https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c2567f2b-0b01-0010-b7b5-977cbf80665d
2.https://www.sdn.sap.com/irj/sdn/abap-elearning
thanks reward if helpful

Adobe Interactive Forms displaying returned tables

can anyone help me display returned tables in adobe
interactive forms
i have an 2 adobe interactive forms, one for input
the other for output on 2 different views
the input form takes a few parameters, calls the
back end RFC and the
output form displays okay, but i just get the last
row from the table
i've tried binding 1 of the output table parameters to a drop down box and subform,the drop down box displays
one of the return parameters but will not drop down
whenever i include a subform i get a java error on
the output form with no display
i know there are several rows returned from testing the rfc inside abap workbench

Hi Dennis,
To display table in Adobe forms.
Follow these steps :
1. Insert one sub furm.
2. make its type to flow content and flow direction to Table in object property.
3. Insert another subform in above sub form and makes its type to flow content and flow direction to Table row.
4.In binding tab for this subform check the checkbox for "Repeat subform for each Data Item" and in min count you can specify at a time how much rows you want to display.
5. Now place your UI Elements for Data view into this sub form.
6. format these ui elements as you required.
Run application now u can see multiple rows in adobe forms, if you have multiple elements in your table node.
Let me know the status.
Regards,
Bhavik

Unable to toggle a Radiobutton in an adobe interactive form

Hello experts,
I am populating a table in adobe interactive form and table is bound the context node of Wedbynpro java. I want first column of table to be with radio button and at a time only one radio button should be active.
But problem is i can put active all the radio buttons in that column when only one should be active.
What would be an issue ?
Thanks in advance.
Swami

Hi Swami,
Unless and untill the radio buttons are in a group you can select all of them.
Since each record in the table is comnpletely independent with other you have this behaviour.
Is the requirement is something like you will have a dynamic table on the form.
user can select only one row at any instance, if so I would simply write a on click event script.
Onclick get the instance Index of that row.
loop through all the instances of the table and set the coulmn (radio button value) to null / off when the index is same as the selected index set it to on.
Hope this gives you an approach.
Cheers,
Sai

Generate Adobe Interactive Form in background and setpdfSource value.

Hi,
Is there any way to create Adobe Interactive Form in the background assigning R/3 data (without displaying) and assign pdfSource binary information in context attribute and later, display Adobe Interactive Form using pdfSource context attribute in a new window?
if Adobe Interactive Form is in Visible state, I'm also able to display Adobe Interactive Form in a new window using pdfSource binary context attribute, .
But, unable to create Adobe Interactive form in the background when Adobe Interactive Form Visibility is NONE and unable to assign binary data to pdfSource attribute in context and hence unable to display Adobe Interactive Form in a new window. Kindly help me if this process is possible.
Thank you in advance.
Regards
Prasad

Hi Prasad,
This is certainly possible. First populate the dataSource context node with the data (e.g. coming from R/3). Then use <a href="http://help.sap.com/javadocs/NW04S/current/wd/com/sap/tc/webdynpro/clientserver/adobe/api/WDInteractiveFormHelper.html">WDInteractiveFormHelper.getContextDataAsStream</a> to obtain the data.xml as a byte[] by calling toByteArray() on the ByteArrayOutputStream. The next step is to obtain the xdp template as a byte[] (I don't know exactly how to do this, but it's certainly possible using some API, just as you would read other resources deployed within your Web Dynpro). When you have both the template and the data, you can use the <a href="http://help.sap.com/javadocs/NW04S/current/wd/com/sap/tc/webdynpro/clientserver/adobe/pdfdocument/api/package-summary.html">PDFDocument</a> API to render a PDF, something as WDPDFDocumentFactory.getDocumentHandler().getDocumentContext().getDocumentCreationContext(); set the data and the template and other options like interactive, call execute and retrieve the pdf byte[] from the returned object. Eventually you can assign the pdf byte[] to the pdfSource context attribute. In case you use NW04, you must use the <a href="http://help.sap.com/javadocs/NW04S/current/wd/com/sap/tc/webdynpro/pdfobject/api/package-summary.html">PDFObject</a> instead.
Besides, why would you want to create the PDF before displaying it?
Kind regards,
Sigiswald

Error while running adobe interactive form

Hi,
I made a scenario to update a z table using adobe interactive form in webdynpro.While executing I am getting the error as :
Termination type was : RABAX_STATE
Can anyone please guide me as to what can be the reason behind this error.
Thanks in advance !!

Hi
I suggest that you first review your configuration using this tutorial which short and to the point:
[ADS configuration|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f03414f8-d4ce-2a10-d4b6-ab201b329d98]
After that perform the tests that were suggested in the posts above (link to the relevant tests [ADS tests|http://help.sap.com/saphelp_nwmobile71/helpdata/en/43/f31e3082221595e10000000a1553f7/content.htm]
Regards
Adi J.

WEBDYNPRO ADOBE INTERACTIVE FORMS INTERNAL TABLE BINDING

Hello Firends,
I have created one table in the WebDynpro Program with Context NODE_RESULT having Cardinality 0...n in the View ADOBE_VIEW. In this view I have created the Interactive Form and specified the properties: data source as NODE_RESULT, Template Source as Z_XX_ADOBE_FORM.
Also I have made an supply function for the context NODE_RESULT as GET_RESULT.
In the Supply Function I have used the BAPI to fill the contents of Internal table (itab_data). And have binded the itab_data using node->bind_elements... (ALSO Tried node->bind_table...).
Also I have coded the HANDLE_IN method.
Here the point is that I can see the table in the interactive form layout and have successfuly binded all the elements and when I have tested the form, the Adobe form is showing the blank table. i.e. it is showing up only the design of table, not the internal table values what I have binded.
I have made every check like ADS is working fine as I can run the Interactive form through the ABAP program (i.e. through se38, where the form is allowing me to save the data in the PDF).
Have installed the ACF.
Also checked that the form is XML based schema and it Generated.
Here everything is fine but I am unable to bind the internal table from webdynpro to Adobe Interative form.
Friends plz help me in resolving this issue.
Thanking You
Regards
Pradeep Goli

Hi Vaibhav,
Sorry for replying late.. I have done debugging on the node and found values are being populated to the internal table which i have created, and also as you said i have dragged the node and found the table icon is appearing and in form object pallette of that table the poperty of binding is "....[*]" is also creating but the vvalues are not being reflected to the PDF output.
Also i have tried many approaches like first creating the form and then creating the webdynpro program and by linking the form to the wendunprro. But the result is same i.e. no values are being found in output.
But i have a doubt that what are the system requirements to get this binding done properly. i.e. I am using Netweaver 2004 with SPS release 7 and Adobe 8 and ACF is being installed in the system. And also I can see the values if I am using the structure but the problem is with table. And I can work with the ABAP ADOBE where if I am coding using se38 and executing the values are excellently displaying in the PDF output(Similar case with interactive forms) Also ADS is properly configured.
Is it compulsary to have SPS GREATER than 8 for NETWEAVER 2004.
Please kindly help me in this regard. Thanking you at the earliest.
Regards
Pradeep Goli

How to binnding the data in the adobe interactive forms for making a table?

Hi, experts,
Function:
Through the sharing context node between adobe interactive form and a WDA for ABAP, display the data of the sflight_node in the ADOBE.
version:
Acrobat Reader 8.1.0
currently both of the SAP-ABA and SAP-BASIS SP level: 9
ADS : Successful.
The following is my action:
1.     Create a interface (Z_SFLIGHT_INTF) with a attribute node (SFLIGHT_NODE) that type is "sflight" using the transaction code "sfp"
2.     Create a form (Z_SFLIGHT_FORM) using the transaction code "sfp" with the interface Z_SFLIGHT_INTF.
3.     Trag the sflight_node in the Z_SFLIGHT_INTF to the form( Z_SFLIGHT_FORM).
4.     Open the layout tab in the form(Z_SFLIGHT_FORM), and create a table(table1). Click the table created just now, select the binding tab in the object tab, and in the Default Binding, select the SFLIGHT_NODE under the Z_SFLIGHT_FORM.
Problem 1:
Do you tell me whether is right for binding the context SFLIGHT_NODE using this way? If bind 3 context attributes in the sflight, how can I do it?
5.     Create a WDA for abap (ZZ_02_SFLIGHT), and create a view(MAINVIEW) using transaction code "se80" in the sap-gui with adobe interactive form. Set the templatesource(Z_SFLIGHT_FORM) in the adobe interactive form properties and saved, and then, datasource is "MAINVIEW_Z_SFLIGHT_FORM" automatically.
6.     But I only found the attribute SFLIGHT_NODE under the context node(Z_SFLIGHT_NODE), and I don't found the NODE ( SFLIGHT_NODE ) context in the context tab in the WDA for abap so that I don't set data to the context NODE (SFLIGHT_NODE).
Problem 2:
Do you tell me what can I do it so that I get the node SFLIGHT_NODE rather than attribute in the WDA for setting the data to the CONTEXT NODE (SFLIGHT_NODE)?
Thanks a lot.
Best regards,
Tao

Hi, experts,
You can reply back to me via e-mail if you think we should discuss this internally at [email protected] or [email protected]
Thanks a lot.
Best regards,
tao

Drop down in dynamic table in the Adobe Interactive Form (Web dynpro ABAP)

Hi All,
I have scenario use drop down in dynamic table in the adobe interactive form (Using the button the dynamic table row will be increasing and decreasing).
Assume I Add five rows dynamically in the dynamic table. The Last column contains Drop down.
I have button in the adobe form.
Button Name = u201CSAVEu201D
Button type    = SAP Submit button (Native type u2013 I am Using ZCI).
While clicking save button, I need to store the dynamic table datau2019s to back end system. I can able to store the data to back end system. After form data getting saved those particular values need to display in the adobe form.
Here I am facing a problem.
I cannot able to view as a default value in the drop down, which I have selected some values after save operation I am not getting any values in the drop down as a default.
Example:
The dynamic table contains 5 rows (Each and every row Drop down contains one to ten values).
1)     I have selected second value in the Drop down (ROW1)
2)     I have selected fourth value in the Drop down (ROW2)
3)     I have selected fifth value in the Drop down (ROW3)
4)     I have selected seventh value in the Drop down (ROW4)
5)     I have selected third value in the Drop down (ROW5)
I press the save button that particular Drop down value gets saved in back end system and that particular values want display in the Drop down as a default value.
How to resolve this problem.
Regards,
Boopathi M

Hi,
Solve the problem .
I have created the New node for dropdown. also i have one node already for table.
The new node i bind to dropdown, the table same for table.
Its working fine
Boopathi M

Binding problem from adobe interactive form to SAP

Hello All,
I'm using SAP NetWeaver Developer Studio 2.0.9 SAP WAS 2004s SP11.
I'm tried to exercise with document "How ToCreate Online and Offline Forms in Web Dynpro for Java" (you can check it this link https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4fd2d690-0201-0010-de83-b4fa0c93e1a9). I could run it succesfuly but i have a problem. I couldn't get data from Adobe Interactive form when i click "Submit to SAP" button. All field value return with "null".
The code is like that;
public void onActionFormSubmit(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
 //@@begin onActionFormSubmit(ServerEvent)
 String name = wdContext.currentTravelDataElement().getEmployeeName();
 String costcenter = wdContext.currentTravelDataElement().getCostCenter();
 String city = wdContext.currentTravelDataElement().getDestinationCity();
 String country =
 wdContext.currentTravelDataElement().getDestinationCountry();
 wdThis.wdGetAPI().getComponent().getMessageManager().reportSuccess(
 "Form submitted: Employe Name="
 + name
 + " costcenter="
 + costcenter
 + " city="
 + city
 + " country=" +
 country);
What could be the problem?

hi Selcuk,
check what is the cardinality of the node that bound to the interactive form.
interactive form->properties->dataSource = <xyz node of context>
goto <xyz node of context> -> properties
just change the cardinality to 1..1.
goto
interactive form->properties...
check that the dataSource and pdfSource are bound to the right Context nodes/attributes...
hope this helps...
with regards,
-Amol Gupta

SCROLL DOWN IN ADOBE INTERACTIVE FORM TABLE

Hi Experts,
Any possible for to keep scroll down option in adobe interactive form? If possible means please let me know.
Thanks,
Senthil Prabhu

hi,
My requirement, is to use dynamic drop down in dynamic table. I am using webdynpro abap.
i populated the value in drop down.
Its working fine but the problem is how to fill the default value in drop down. because i want to bind the default value which im getting specify value from the table.because each row
im getting different values, like first row
CAR
, that CAR want to fill as a default value in drop down and second row as
BIKE
that BIKE want to fill as default value in drop down ( example drop down contain car , bike , cycle).
In adobe form i binded like this
$record.DATANODE.DATA[*].DNA_RATING
i dont know whether this one is correct or wrong .
im getting default value as empty.
please give me some solution how to do this.its very urgent
thanks
hemachandran.

Abap Webdynpro & Adobe Interactive Forms : Refresh Context

We created a Abap Webdynpro program to fill an Adobe interactive form. When we read the first time the data the form context is filled and displayed. When we read other data then the form is not refreshed. This is only the case when the form is enabled as interactive.
When we use 2 views then everyting is ok. But we want to place the form in an Embedded View, then we have the same problem. Is this a know problem ?

Hi,
We faced a similar Issue. We could get past it by chaging the view property to "When Visible" for both the embedded view & Main view.
Try & letme know if it works. We are trying to solve some other issues aroind this right now. Only the checkboxes dont get populated the second time we go to the view having Adobe form. Rest all data on form is refreshed. But not the Check Boxes.
thanks,
Phani

Table control in adobe interactive form ?

Hi,
Can we make a table control i.e. something like the same functionality that of table control in an adobe interactive form?
Thanks !!

it all depends on what you want to do.
In SFP, there is a table wizard you can use to create your basic table with headers/footers etc...
You can put buttons on your PDF with code behind them to ADD/DELETE rows dynamically.
for example:
data.Page2.parms.instanceManager.addInstance(1);
I have tables where a column would consist of input fields or radiobuttons or just about anything else you can imagine to put in a table.
But as Otto mentioned, you should elaborate more and tell us what you want to do with the table. If you're not afraid to jump into Formcalc/Javascript, you can do some quite complex activities in your form if you want to.

Update table after filling an adobe interactive form inside a workflow

Hi
I have the following workflow problem:
I made a webdynpro application that incudes an adobe interactive form. An user fill this form. After filling the form he will press the submit button. The data will be introduced in the custom table and a workflow will be started.
Inside the workflow, I attached the form filled by the user. After attaching it I introduce a user decision step in order to see the content of the pdf attachment, modify it and send again. So, the person that will execute the workitem has to open that pdf and fill some additional fields. The information should be updated in the table and then send to other persons. I don't know how to update the table with the new values that are inserted in the form in that decisional step and send the updated form to the other users.
Thank you in advance !
Iulia

Hi Iulia
You cannot do that through decision step with attachment. You have to do with task registation in t-code SWFVISU. so the work item will come to UWL once the approver clicks the work item it opens and entered his comments, You have to caputer the comments and pass these comments to the workflow container element from there you update to your custom table.
Regards
vijay

Binding context node to table in adobe interactive form

Similar Messages

Maybe you are looking for