Bios Request to set AGP 4x on KT400's

I own some MSI KT4VL (rev 1.0 w/ latest bios) and some Radeon 9700 Pro - Eventhough it is running fairly decent, I do experience lock-ups and this is annoying...I've posted the details in the Radeon 9700 and KT4 thread here in this forum...
From what I've read from other users experiencing lock-ups issues with the 9700 Pro and KT400 motherboards, a lot of them were able to set AGP 4x (instead of AGP 8x) as a workaround and get the 9700 to run nicely - With the MSI KT4V, the AGP mode cannot be changed from AGP 8x - Would it be possible to make a request and get a biod which would allow AGP mode to be changed so that we (the consumers) could get on and try out this workaround (this would ease the pain)...Bas, Maesus, can you guys inquire and make such a request?
Much appreciated,
--fibo

Quote
Originally posted by maesus
Can you point me to the location where you find proof for VIA KT400 board, set AGP4x on AGP8x card is possible. Thanks.
There are KT400 motherboards out there where you can set the APG speed mode other than 8x - The Asus a7v8x for instance...
Here is a thread here where 'RavenShield1' set the AGP speed to 4x as a workaround to fix the lock-ups...I will add more examples and just wanted to point you to this one in the meantime...
The bios for the KT400 MSI mobo's according to the manual is supposed to let you set the AGP mode but whatever GPU I run, I got no way to change it...
Thanks,
--fibo
EDIT: Another one here - Sawataqe post

Similar Messages

Is there a definitive word on how high/low to set agp aperture, et al?

Seemingly, the most elusive part of the bios settings is the agp-related settings (agp aperture, fast-write, etc.). I say this, because all I ever find on posts is 'this is what I do', or 'well, this is my rule-of-thumb...'. Is there no definitive logic for how to set these? I realize, like some people say, you can futz with the settings, run a benchmark, rinse, repeat, until you get your best benchmark setting, but this seems a bit too 'random' for my taste. I'd actually like to understand what I'm doing, why I'm doing it, and be able to see the benchmark to prove it right or wrong.
Does anyone have a good, definitive understanding of these features to be able to offer a reasonable justification for setting them one way or the other? So far, in my limited understanding, I tend to think I should set my agp aperture to as low a setting as possible, for example, as my video card has 256mb onboard, which exceeds the requirements of the games I play in-and-of-itself. Thus, why would I want to tie up system ram when video card ought to have more than enough already? Maybe this sounds stupid, but that's why I'm asking

256Mb should be more than enough to run todays games at HI settings. From what I understand it only addresses out memory tasks when onboard memory has exceeded its amount. Running down the AGP bus to RAM would be slower than onboard because of the interface (GFX-upto 256Bit DDR3 etc). If the app can run happy with onboard RAM, the amount set for "aperture" is used for system use and is not set a side until the apps needs more than GFX can offer addressed onboard. It does need an amount set even if its the smallest amount. I thinks
Also please read below pages:
http://www.tweak3d.net/articles/aperture-size/
http://www.cybercpu.net/howto/basic/AGP_aperture/index.asp
http://www.anandtech.com/news/shownews.aspx?i=17139

MOVED: How to set AGP so my MSI 6600GT (AGP) is stable?

This topic has been moved to Overclocking and Modding Corner Forum.
How to set AGP so my MSI 6600GT (AGP) is stable?

Quote from: jlpicard1412 on 27-February-05, 07:08:30
OK, that's the question .... how do I make my system stable if I overclock the CPU and want the graphics card stable too ... boils down to the AGP clock ... what do I need to do ... motherboard is K8T800 Neo 2 .... what about Cell Menu settings?
Tried using 3dmark2001 and 03 ... neither worked.
I thought standard AGP was 66MHz .....
JLP
Yes standard is 66MHz.
I did a little bit of research on your motherboard as far as I know it has AGP spped lock. Which means no matter how you set the speed of your CPU, the AGP should always stay at 66Mhz. There might be a manual override in the bios to raise it higher then 66, but you don't really gain anything raising it higher then 66Mhz.
I also read your motherboard might have problems keeping it locked at 66Mhz. So you might want to check to see if they have released any bios updates.
Most nVidia cards will work fine with higher then 66 so your problems might be something else. I'm not saying to set it higher I'm just saying they usually don't have problems running on a faster AGP bus.

IAM-3056160:Modify User Profile request cannot set or change attribute Job Code, since it is not defined in the corresponding data set.

I am trying to modify the value of the field "Job Code" through API I am getting the following error.(OIM11gr2). I do not get this error when updating the other fields. There is a field by the name USR_JOB_CODE in the database. When I poked around I found that there is no Job Code field in the User Form. Any ideas?
IAM-3056160:Modify User Profile request cannot set or change attribute Job Code, since it is not defined in the corresponding data set.:Modify User Profile:Job Code
oracle.iam.identity.exception.ValidationFailedException: IAM-3056160:Modify User Profile request cannot set or change attribute Job Code, since it is not defined in the corresponding data set.:Modify User Profile:Job Code
       at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:237)
       at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
       at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
       at oracle.iam.identity.usermgmt.api.UserManager_nimav7_UserManagerRemoteImpl_1036_WLStub.modifyx(Unknown Source)
       at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
       at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
       at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
       at java.lang.reflect.Method.invoke(Unknown Source)
       at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
       at $Proxy2.modifyx(Unknown Source)
       at oracle.iam.identity.usermgmt.api.UserManagerDelegate.modify(Unknown Source)
       at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
       at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
       at sun.reflect.DelegatingMethodAccessorImpl.invoke

THanks for your reply. Here is the snippet from User.xml that contains info about job code.
<entity-attribute>Job Code</entity-attribute>
<target-field>usr_job_code</target-field>
<field name="usr_job_code">
<type>string</type>
<required>false</required>
</field>
<attribute name="Job Code">
<type>string</type>
<required>false</required>
<searchable>true</searchable>
<multi-valued>false</multi-valued>
<MLS>false</MLS>
<multi-represented>false</multi-represented>
<attribute-group>Basic</attribute-group>
<metadata-attachment>
<metadata>
<name>multi-valued</name>
<value>false</value>
<category>properties</category>
</metadata>
<metadata>
<name>user-searchable</name>
<value>true</value>
<category>properties</category>
</metadata>
<metadata>
<name>category</name>
<value>Preferences</value>
<category>properties</category>
</metadata>
<metadata>
<name>bulk-updatable</name>
<value>true</value>
<category>properties</category>
</metadata>
<metadata>
<name>read-only</name>
<value>false</value>
<category>properties</category>
</metadata>
<metadata>
<name>visible</name>
<value>true</value>
<category>properties</category>
</metadata>
<metadata>
<name>encryption</name>
<value>CLEAR</value>
<category>properties</category>
</metadata>
<metadata>
<name>display-type</name>
<value>TEXT</value>
<category>properties</category>
</metadata>
<metadata>
<name>system-controlled</name>
<value>false</value>
<category>properties</category>
</metadata>
<metadata>
<name>max-size</name>
<value>512</value>
<category>properties</category>
</metadata>
<metadata>
<name>custom</name>
<value>false</value>
<category>properties</category>
</metadata>
</metadata-attachment>
</attribute>
I am able to retrieve the value of the Job Code attribute without any problem with the following code.
System.out.println("JOB Code: "+user.getAttribute("Job Code"));

Job in Source system terminated - Request is set to red

Hi
I ran a process chain on the weekend which loaded several info packages into a cube. They all ran successfully except for one.
The error message said "Job in source system terminated - Request is set to red".
I've looked on Monitor and no records were extracted.
How can I find out more information as to why this failed ?
Sandra
thanks in advance

Hi sandra,
Suppose if the job in the source system is terminated then no extraction is possible.In order to see the job in the source system->in the process monitor tab->go to environment menu-->job overview>in the source system.so by following the above steps u can see the job in active r cancelled like that.by clicking on the job log u can see all the steps involved in that job.based on that u can take action.
what my suggestion to this issue is force the qmstatus to red and delete that incorrect request and perform again repeat.it will goes through successfully unless it is not a functional error.
assign points if it is useful...
regards,
sri

Request group set error...

I have created an request group set to upload Master Item in inventory.
I am getting the following error when submitting Request Group request set from "India Local Inventory" responsibility in vision R12 instance :
APP-FND-01564: ORACLE error -1116 in SUBMIT: others
Cause: SUBMIT: others failed due to ORA-01116: error in opening database file 85
ORA-01110: data file 11: '/d02/vis_db/VIS/db/apps_st/data/tx_idx17.dbf'
ORA-27041: unable to open file
Linux Error: 24: Too many open files
Additional information: 3.
The SQL statement being executed at the time of the error was: &SQLSTMT and was executed for the file &ERRFILE.
How can I solve this problem??

Please refer to the following notes:
[Note: 566234.1 - Error: 24: Too many open files running initial request set|https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=566234.1]
[Note: 429760.1 - Ora-01110: Data File Error Opening Datafiles File|https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=429760.1]

"Could not determine request character set " error while recording

I am using the OATS 9.3 GA version. When I try to record a load testing script using Openscript, I am getting the following error and the recording gets stuck without moving to the next page.
!ENTRY oracle.oats.scripting.modules.http.proxyRecorder.ProxyRecorderQueueRunnable 2 0 2011-08-11 14:50:26.328
!MESSAGE Could not determine request character set for https://adcgek13.us.oracle.com:10616/sales/BIProxy?cid=BIPresentationServer&RedirectURL=res%2fsk_blafp%2fdvt%2fBIChart.swf, referer=https://adcgek13.us.oracle.com:10616/sales/faces/mooOpportunityHome?_afrLoop=83903503964000&webApp=HomePage&fndHomePageViewId=%2FAtkHomePage
Should I check any of the script or record settings to fix this?

Hello
Where did you get the 9.30 GA version? is not yet available for download.
Regards
Alex

Request property set proper usage

How to use request property set from datasync project properly ?
Should I just set a property and then dynamically do get and set header with
the property.
Any suggestion will be quite helpful
Thanks,
Subhabrata

Subhabrata,
There is quite a bit of docs to look at. Take a look at the tags:
http://e-docs.bea.com/workshop/docs81/doc/en/core/index.html
-Phil
"Subhabrata Sarkar" <[email protected]> wrote in message
news:3fc52b1a$[email protected]..
>
>
How to use request property set from datasync project properly ?
Should I just set a property and then dynamically do get and set headerwith
>
the property.
Any suggestion will be quite helpful
Thanks,
Subhabrata

GOP /UEFI bios request for GTX N770 TF 2GD5/OC

Symptoms: System will not POST after ASUS Z9PE-D8 WD mobo update to latest BIOS. Worked fine previous. System will POST and run fine with other graphics cards.
The card will POST and run fine in ASUS MAXIMUS V GENE mobo with not current bios. With which I have pulled GPU-Z info as required for a BIOS request.
Prompt response greatly appreciated! There is work I need to be doing! Thank you so much.
S/N: 602-v282-220B1308092571
NVIDIA Firmware Update Utility (Version 5.141)
Adapter: GeForce GTX 770 (10DE,1184,1462,2825) H:--:NRM B:01,PCI,D:00,F:00
The display may go *BLANK* on and off for up to 10 seconds during access to the EEPROM depending on your display adapter and output device.
Identifying EEPROM...
EEPROM ID (EF,3012) : WBond W25X20A 2.7-3.6V 2048Kx1S, page
Reading adapter firmware image...
IFR Data Size : 1112 bytes
IFR CRC32 : 189B4216
IFR Image Size : 1536 bytes
IFR Image CRC32 : 4552879D
IFR Subsystem ID : 1462-2825
Image Size : 99328 bytes
Version : 80.04.C3.00.21
~CRC32 : D6321A32
OEM String : NVIDIA
Vendor Name : NVIDIA Corporation
Product Name : GK104 Board - 20050000
Product Revision : Chip Rev
Device Name(s) : GeForce GTX 770
Board ID : E12D
PCI ID : 10DE-1184
Subsystem ID : 1462-2825
Hierarchy ID : Normal Board
Chip SKU : 425-0
Project : 2005-0000
CDP : N/A
Build Date : 06/03/13
Modification Date : 06/18/13
UEFI Support : No
UEFI Version : N/A
UEFI Signer(s) : Unsigned
Board: Asus Z9PE-D8 WS
Bios: Version 5206
VGA: MSI GTX 770 2GB/OC
PSU: Corsair TX750
CPU: Intel Core E5-2687W Default CPU settings, no OC
MEM: Crucial 2133Mhz 16GB
HDD: Kingston HyperX 250GB SSD
COOLER: Thermaltake
OS: Windows 7 64x Pro
Sign-On Message : GK104 P2005 SKU 0000 VGA BIOS
MSINV282MS.352

Quote from: flobelix on 19-November-13, 16:07:12
Don't bump your posts: >>Please read and comply with the Forum Rules.<<
I guess you mean ASUS Z9PE-D8 WS and not WD. That is a dual cpu socket XEON workstation board not meant for gaming (hardware). The NV282MS.352 vbios the vga uses is a current one. Contact Asus and report the compatibility issue and maybe they can help you with.
My use of my system is video editing. It uses gpu heavily for encoding. Hence, the hot GFX card I just purchased. I have been in contact several times with Asus, since they also produce an N770 card, and they do not have any known compatibility issues with their own products, at least. The card worked perfectly with this N770 card when it had the previous BIOS. It was when I upped the BIOS to the latest version that I had the issue. Other GFX cards do work. The N770 wont finish POST. 100% fail. I ended up purchaseing a new BIOS chip with the previous bios flashed, since they could not produce a procedure for me to downgrade. However, I will not be able to use new CPUs with the later micro-codes until I find a way to update the BIOS. Otherwise, I would be FD&H with the old one.
Thanks for the reply,
Rod

UEFI Bios Request for MSI Twin Frozr III HD 7950 O/C Non Boost card, has 7970pcb

Its this one Version: 015.020.000.000.001083 You make this forum far to complicated to navigate for old people , could not figure out how to insert an image, and you can't post external links either. So i linked the bios version, great cards by the way i have two of them, purchased a new motherboard that supports UEFI so I wanted to try. Thanks. More info:
GPU Device Id: 0x1002 0x679A
113-C3861300-X01 113-MSITV277MS.202 TAHITI B0 PROH C38613 GDDR5
3GB 500E/150M
(C) 1988-2010, Advanced Micro Devices, Inc.
ATOMBIOSBK-AMD VER015.020.000.000.001083
C3861300.101 PowerTune Limit: 175 to 260
CCC Overdrive Limits
GPU Clock: 1100.00 MHz
Memory Clock: 1575.00 MHz
Clock State 0 Core Clk: 880.00 MHz
Memory Clk: 1250.00 MHz
Flags: Boot Clock State 1
Core Clk: 880.00 MHz
Memory Clk: 1250.00 MHz
Flags: Optimal Perf Clock State 2
Core Clk: 880.00 MHz
Memory Clk: 1250.00 MHz
Flags: UVD Clock State 3
Core Clk: 300.00 MHz
Memory Clk: 150.00 MHz Flags:

S/n : 602-v277-05sb1205073711 first card S/n 602-v277-05sb1206017147 for Msi Twin Frozr III Hd 7950 o/c regarding UEFI bios request.

"Legacy Mode" BIOS request for MSI R9 280X GAMING 6G

"Legacy Mode" BIOS request for MSI R9 280X GAMING 6G
S/N: 602-V277-310B1407096530
Installed BIOS: TV277MS.3A0
Hi,
I have the annoying problem with my new video card: a screen is periodically blinking in 2D. Probably that problem already solved in a newest BIOS?
I have to use "Legacy" mode because of my PC does not start otherwise.
Related hardware: MB: MSI P67A-GD65 B3 (BIOS 1.19), CPU: i7-2600K, Monitor: HP ZR2440w (DP connection).
Thank you.

here is .3A1
TV277MS.3A1 legacy
TV277MH.3A1 uefi
flash guide:
Quote
Decompress the attached .rar archive with Winrar: http://www.rarlab.com/download.htm
Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
Then unpack the previously provided archive (xxx.rar) and put the included file (TVxxxxx.zzz) on that stick.
Rename TVxxxxx.zzz to zzz.rom.
Put the atiflash.exe from: https://www.techpowerup.com/downloads/2306/atiflash-4-17/
on the USB stick too. Now boot from the stick.
Type atiflash -p -f -noaper 0 zzz.rom [ENTER] and let it flash the vbios.

Backed Up Iphone to itunes and when restoring its looking for a password to restore! None requested or set at original backup. Can anyone help?

Backed Up Iphone to itunes and when restoring its looking for a password to restore! None requested or set at original backup. Can anyone help?

I have not restored device so have all my data on it still. Am not pluggin it in for first time, did this originally when setting up phone. I have an option to restore to original backup as well as 'set up as new'. What happens if I chose the 'restore from backup' option.' how do I go about backing it up first - if i right click 'iphone'' option on left hand side under devices the only option is'eject' or 'restore'. I'm not sure that my iphone is being recognised by itunes - should it not give the name of my iphone under devices?

BIOS Request for G580 Model 2189 Windows 7 x64

Hello, could someone please provide an original BIOS for G580 Model 2189 x64 Windows 7? Thank you!

Not to difficult to find... Why the "original" BIOS request? Usually not a good idea to backstep BIOS unless directed to by support professionals. Also, BIOS updates are independant of Windows Versions, the installer or "flashing": program used to install the BIOS file is sometimes Windows version dependant.
Either way - check this page for BIOS files: http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/lenovo-g580-no...
Good luck.

MSI GT70 0NC FAN always 100% (Unblocked Bios Request?)

Hello, I have a problem with my GT70 CPU Fan.
It keeps running at full speed since I use the Internal GPU because my graphic card is dead and removed.
I have found few similars topics that always ended up by unblocked bios request so I tried to update with the latest versions available on the website but it didnt solve the problem.
My current settings are
EC: 1762EMS1 ver4.14
BIOS: E1762IMS.10U
Running on Win 7 64b
The link for my exact same problem : https://forum-en.msi.com/index.php?topic=254778.0
Thanks in advance

yes, i can start work on it once donation is received: https://forum-en.msi.com/index.php?topic=134259.0
and to send it back to you when its done 3-4 hours later

BIOS HTT (FSB) Setting in KA790GX

I also have the problem with this board and BIOS O/C of CPU FSB reported in another thread.
When I try to increase the FSB MHz setting in BIOS 'Cell Menu' from 200MHz to anything else - e.g 201, 210, 215 it can be set OK in BIOS and saved but when booted into Windows or MemTest, it only ever shows 200MHz in CPU-ID, Windows or Memtest. However, the 'Cell Menu' in BIOS always shows the new setting although the set value does not load, it always says 200 in Windows etc and runs at 200MHz.
However, if I set the mainboard hardware OC switches to 10% (Switch 1 on, 2 off), then the resulting setting of 220MHz loads up, the system runs at that setting and is very stable.
However, I would rather fine tune the FSB & RAM settings through 'Cell Menu' than use the coarse mainboard hardware switches.
'Cell Menu' manual RAM settings work properly, if I set 5-4-3-11, then that is what CPU-ID shows the RAM running at.
I have tried all the BIOS's for this board and they are all the same so I think there may be a BIOS error for the KA 790GX system.
I have also contacted MSI directly about this through Online Customer Service.
I also have a MSI DKA 790Gx based system and on this, the BIOS CPU FSB setting does work.

Quote from: Pete B on 19-January-09, 22:00:40
I had not really being trying to achieve any massive O/C from this system, rather just getting the CPU running at it's default 2.5GHz without the RAM taking a hit.
The default CPU speed of 2.5GHz with the default CPU multiplier of x12.5 at FSB (or I suppose, correctly for the AMD based systems - HTT, regardless of what the BIOS setting says) of 200MHz results in RAM running at 714MHz with the ratio set at 1:2.
Reducing the CPU multiplier down to x12 & increasing the HTT to 210MHz then takes the CPU back up to 2.52GHz & the RAM up to 840MHz, a useful speed increase over the default settings. The HTT multiplier is also reduced down to x4 to keep the value below 1GHz.
Quote from: AaronYuri on 19-January-09, 19:12:06
If anything, overclocking is my strongest point.
And why do you think that? Explain why it does? I'll explain why it don't:
The HTT clock will calculate the memory, CPU and HyperTransport clock; having a higher or lower multiplier does not make a difference. It works on Intel's FSB interconnect, yes, because the faster you go, the more bandwidth you get (you also increase the NB clock by decreasing the multiplier.) Putting the HyperTransport link over 1000MHz is damaging for the board. It cannot sustain it for long periods.
According to your theory, it should enhance the performance of these components, but I don't see how it does that?
Well Aaron i haven't spoken about the hypertransport link but only about the fsb clock called htt on new Amd processors :winked: so what you've said in your 1st phrase is my theory or sooner the well known rule by every overclocker.

Bios Request to set AGP 4x on KT400's

Similar Messages

Maybe you are looking for