BIP with 8.1.1.6 - Pass Report Language as a parameter in popup applet?

Hi
I know we can influence the report language by changing the language in User Preferences -> Report Parameters. I was wondering whether it is also possible to specify the language in the report parameter popup applet?
With BIP on 8.1.1.6 I can check the "parameters" option in the report definition to make a "popup" appear prior to report creation, and specify all kind of parameters, but I didn't find a way to change the language.
I tried parameter names like "ReportLanguage" or "Language" but none seemed to work.
Any help is appreciated.
Penky
Edited by: Penky on Jul 23, 2012 2:36 PM

Ok, I have digged further and found Doc ID 1226744.1 with a user interface enhancement regarding runtime parameters, it seems you need to set a report with Parameters option set to true. Here's the section with instructions to change this option:
http://docs.oracle.com/cd/E14004_01/books/Reports/ReportsParamaterizedRpts9.html#wp295366
Hope it helps,
Wilson

Similar Messages

  • Run Report with Pass Number and Varchar Lexical Parameter values

    Dear Sir/Madam
    Due to an urgent change required to a report I would most appreciate it if you can please advise me if it is possible to get this report working by either passing in multiple lexical parameters or one signle lexical parameter when calling the SRW.RUN_REPORT command with the following methods:
    Firstly: When calling report with a run_no and spr_cd passed in through one lexical:
    cmd_line: REPORT=D:\DEV\REMITTANCE.rdf BACKGROUND=YES BATCH=NO DESFORMAT=PDF DESTYPE=FILE DESNAME=D:\DEV\REMITTANCE.pdf
    CP_L_PARAM=RUN_NO=TO_NUMBER(28) AND SPR_CD=SUPP1
    Both with a TO_NUMBER and without, whereby I attempt to do a SUBSTR within the query of the called report to derive the RUN_NO Oracle Reports fails to accept the SUBSTR.
    Secondly: I am now trying to call the with passing two lexical parameters into the report as follows:
    cmd_line: REPORT=D:\DEV\REMITTANCE.rdf BACKGROUND=YES BATCH=NO DESFORMAT=PDF DESTYPE=FILE DESNAME=D:\DEV\REMITTANCE.pdf
    CP_L_RUN_NO=||TO_CHAR(lv_run_no)|| CP_L_SPR_CD=||lv_spr_cd;          
    NOTE: The above is an output of the actual command line and not what is passed into the command line, thus the quotes are missing. Please also note that the report is running fine with the only a hard coded RUN_NO value PASSED without the SPR_CD.
    Unfortunately this is also causing issues as the RUN_NO is a number and as you know you can only pass in strings.
    Your urgent help is required on this matter please as our client is expecting a solution this afternoon.
    Hope to hear form you soon.
    Kind regards
    Andrew Mason

    Dont Worry I've worked it out...

  • Passing a value for date parameter from Oracle Forms to BIP

    Hi
    I have created a report with the following SQL query:
    select
    d_tables.d_seq,
    to_date(d_tables.d_created) creation_date,
    d_tables.d_created_by created_by,
    d_tables.d_pk,
    d_tables.table_name,
    d_tables.comments
    from
    d_tables, d_applications
    where
    d_tables.d_ppk = d_applications.d_pk
    and to_date(d_tables.d_created) >= nvl(:P_CRE_DATE_FROM, to_date(d_tables.d_created))
    and to_date(d_tables.d_created) <= nvl(:P_CRE_DATE_TO, to_date(d_tables.d_created))
    The parameters P_CRE_DATE_FROM and P_CRE_DATE_TO have been set up as date in BI Publisher with format dd-MMM-yyyy
    The report works fine when launched in BI Publisher.
    I want to call this report from Oracle Forms and I'm trying to pass the values for both the parameters. However, the report does not generate output based on values passed.
    Does it have to do with datatype? Does anyone know a solution for this?
    Kind regards,
    Aparna

    Thanks for your suggestion. I am already referring to the whitepaper and have integrated Forms with BI Publisher. The parameter passing is working fine for a varchar2 type of parameter. However, for a date type, there seems to be some problem.

  • How to schedule multiple reports with different local to change static field language ?

    Hi all,
    we have requirement that we will place multiple schedule request on same server ,This schedule request will be different local setting with parameter value like: en-GB,en-US,Chinese...etc .We used translation Manager for this and it takes this parameter and change report language for static fields.
    problem is that ,on server it is not working properly,we tested for one report .if we pass prompt value to change local setting in report the we need to log off and login again in CMC to reflect new local or on BI Launchpad we need to refresh page then it shows new language.
    How we can do this with multiple scheduled report which will have different local value like en-GB,en-US,Chinese,German....?These schedule request are getting placed in server by one user .
    Please help us with sample code.
    Thanks
    Madan

    Hi,
    The only approach I can think of is to create a template report which uses variables
    For each column you would need to variable
    v_columnAName and v_columnAValue
    v_columnAName would have a if statement in it
    =if([client]="clientA" or [client]="clientC";NameOf([firstName]);if([client]="clientB";NameOf([SSN]);NameOf([lastName]));
    v_columnA would have a if statement in it
    =if([client]="clientA" or [client]="clientC";[firstName];if([client]="clientB";[SSN],[lastName]));
    This would only work when you had a small set of clients.
    This might be more managable if it was done in the universe
    Regards
    Alan

  • SSRS report with tabular model – Create a dropdown report parameter with "None" option as the top value.

    Hello Everyone,
    I would like to create SSRS single select dropdown list parameter (it is using MDX query in dataset) with "None" option at the top. Note: this parameter is dependent parameter and getting filtered based on the selection of another parameter.
    How can I add hard-coded "None" text at the top of the parameter values? Can Union function help me to add this hard-coded value? The purpose is, when user selects None from the dropdown ignore the condition of the parameter from MDX query else
    use the selected value in query condition.
    Thanks, Ankit Shah
    Inkey Solutions, India.
    Microsoft Certified Business Management Solutions Professionals
    http://www.inkeysolutions.com/MicrosoftDynamicsCRM.html

    Hi Ankit,
    In your scenario, you can achieve your requirement in report level other than in query. Add a Filter like:
    Expression: =IIF(Parameters!Name.Value="None",1,Fields!Name.Value)
    Operator:=
    Value: =IIF(Parameters!Name.Value="None",1,Parameters!Name.Value)
    In this case, report will ignore this parameter, and show all the records on the report when selecting “None” value. I have tested it on my local environment, the screenshots below are for you reference.
    Reference:
    Add a Filter to a Dataset (Report Builder and SSRS)
    Regards,
    Charlie Liao
    TechNet Community Support

  • Passing multiple values to a parameter in report

    Can anyone help me how to pass multiple parameters to a parameter in my report.
    As user is able to select multiple values from list of values , can I pass the selected values to calling function.
    Suppose if User selects Value1,Value2,Value3 from list of values of a parameter P_Org,
    I need to pass all these values to parameter P_Org in my Before Trigger Function in Discoverer reproting tool.
    Thanks in advance

    I have a Before trigger Function to which the parameters will be passed.
    Suppose if User selects multiple values for a parameter then how to pass these multiple Values to that parameter?
    eg:In first Workbook Before Trigger is fired and the paramters for the trigger are
    'par1','par2','par3' etc.
    If User selects multiple values for a parameter 'par1' from the list of values displayed then how to pass all these values to 'par1' in Function?
    After firing the trigger rows are inserted in a temp_table .My second Workbook will
    fetch the rows inserted in this Temp Table.
    I hope u understood what my requirement is...
    Thanks in advance

  • Issue with Cash Management and liquidity forecast report

    Hello folks,
    I am working with cash management and liquidity forecast reports. While running the report for Cash management, as I drill down to planning levels and induvidual GL accounts for the bank accounts, the figures for GL acounts in report does not tally with actual GL balances. As I drill down to last level, it shows the GL balance display which is different from the values in the report. Can anyone tell me why it does not pick up certain values. I find that certain document type "DZ" values are not picked up by the report. Any suggestions?
    Also, I would like to know is there any way to cross check the values in Liquidity forecast report for sales orders, purchase orders and requisitons through any other report in MM and SD. Would appreciate if someone can respond to mu query.
    Thanks in advance,
    -NK-

    In se38, look for programs starting with RFFD*; there are a few for reconciliation of cash management with SD/MM/GL etc.

  • How to create Report with different work sheets in XL Reporter

    Hi All
    I want to create a report in xl reporter where one report has multiple work sheets
    Regards
    Farheen

    Hi,
    There is no option to create report with different work sheets in XL Reporter. You may only use one sheet.
    Thanks,
    Gordon

  • Integrating BIP with multiple LDAP servers

    Hi,
    my question is very simple. In Admin->Security Configuration->Security Model section i've setted Security model combobox with LDAP value. Then i've filled all LDAP information field (for example:URL). All works. But in my rpd i 've multiple LDAP servers (multiple URL) and in the form i can insert information about only one LDAP server.
    Is it possible configure BIP with multiple LDAP servers?
    Thanks
    Giancarlo
    P.S. I'm using OBIEE 10g

    Hi,
    my question is very simple. In Admin->Security Configuration->Security Model section i've setted Security model combobox with LDAP value. Then i've filled all LDAP information field (for example:URL). All works. But in my rpd i 've multiple LDAP servers (multiple URL) and in the form i can insert information about only one LDAP server.
    Is it possible configure BIP with multiple LDAP servers?
    Thanks
    Giancarlo
    P.S. I'm using OBIEE 10g

  • "Automatic running highlight with cursor"function exists on Crystal report?

    Dear sir,
    Is there "Automatic running highlight with cursor" function in Crystal report ?
    Thanks a lot in advance for your advice!
    Best regards,
    Lai Oberdorf

    Dear Ingo,
    thanks for your help always.
    Automatic highlight with the cursor, is like the report on the following link :
    http://www.ibm.com/annualreport/2007/cfs_cf.shtml
    The highlignt is automatically showed up with the mouse cursor places on the report.
    Thanks a lot !
    Best regards from Walldorf:-)
    Lai

  • Dear Sir/Madam,  Adobe acrobat claims that there is an update. However the update process is very flaky and unreliable. Very poor service, with useless update prompts.  System report is attached.  Please fix the update, before advertising useless prompts

    Dear Sir/Madam,
    Adobe acrobat claims that there is an update.
    However the update process is very flaky and unreliable.
    Very poor service, with useless update prompts.
    System report is attached.
    Please fix the update, before advertising useless prompts for updates, for paid versions.
    Thanks

    Nothing is attached.
    You should also be aware that there are a number of scams and malwares claiming fake updates.
    Please post your report and tell us exactly what product and exact version you have.
    And be aware you aren't talking to Adobe.

  • Retrieve SQL with filters applied from an Interactive Report

    I want to use an Interactive report as interface for providing parameters to a base report query.
    I would like to capture the full SQL code from the filtered interactive report and then run the sql to create a collection.
    I have found this tread
    Re: Using Data from filtered Interactive Report
    which says that you can use APEX_APPLICATION_PAGE_IR to access the reports SQL. This holds the information about the interactive report when the user saves it. The sql code from the interactive report (after the user has added filters) is stored in the field sql_query.I can only retrieve the base query and not the filtered version even after saving.
    Any ideas how this can be done would be appreciated.
    regards
    PP

    OK Darren I think I've got it working. My solution is an adaption that follows the steps of a blog I found here: http://stewstools.wordpress.com/2009/02/19/get-ir-where-clause/
    My solution allows you to click on a button and the records that are currently displayed in the IR report are saved to an APEX collection. You can then use the collection to save records to a table or run a report on another page. (I haven't included code for this last step but it's easy to find on the forum)
    First a bit of background knowledge. The following APEX views hold all the information on IRs that you access via PLSQL code in the package you need to download. Run an IR report, save a version of the report, then in SQL Workshop have a look at:
    select * from APEX_APPLICATION_PAGE_IR
    select * from APEX_APPLICATION_PAGE_IR_COND
    select * from APEX_APPLICATION_PAGE_IR_COL
    select * from APEX_APPLICATION_PAGE_IR_RPT
    When you run an IR report it has an internal ID that you can access and also a Base Id for each Saved report that is currently in context.
    Here are the steps:
    1) Download the following package and install it in the workspace schema
    http://www.mediafire.com/?nj118x9vmc9
    click on the link "click here to download"
    2)In the HTML header Attribute of the page where your IR runs, put the following Javascript:
    <!--===================================================================-->
    <!--FUNCTION TO RETRIEVE IR REPORTS SQL WITH WHERE CLAUSE
    <!--===================================================================-->
    <script language="JavaScript" type="text/javascript">
    function SaveAndRunReport() {
    document.location='f?p=&APP_ID.:3:&SESSION.:CONSTRUCT_IR_QUERY:NO::'+
    'P3_BASE_REPORT_ID:'+$v('apexir_REPORT_ID');
    </script>
    <!--===================================================================-->
    Notes: You will need to obviously change the URL above to reflect your Page No. (3) and the name of a HIDDEN Item (P3_BASE_REPORT_ID) that you will populate with the base ID of the report.
    Setting :P3_BASE_REPORT_ID to +$v('apexir_REPORT_ID') is an internal thing and works out of the box. It returns the Id of the Base report.
    3) Create a button called SELECT_SPECIMENS (in region position - top of region) in the IR region that will initiate the execution of the IR background SQL to create a collection with the current selected records.
    TARGET= URL
    URL Target = javascript:SaveAndRunReport();
    You might also want to create a condition that only shows the button when there are records selected
    CONDITION TYPE=Exists(SQL returns at least one row)
    EXPRESSION 1 - put the SQL of the IR report here.
    4)Create a branch back to the same page (3) and with the REQUEST attribute set to the value in the Javascript URL above e.g. CONSTRUCT_IR_QUERY. Create a condition on the branch that uses this branch WHEN BUTTON PRESSED= SELECT_SPECIMENS
    5) Create an AFTER HEADER PROCESS with the following code:
    declare
    v_base_query clob;
    v_where clob;
    v_query clob;
    v_base_where varchar2(12):=' where 1=1 '; -- incase there is no where clause in the base query
    begin
    if apex_collection.collection_exists('IR_COLLECTION') THEN
    htmldb_collection.delete_collection( p_collection_name => 'IR_COLLECTION');
    end if;
    --GET THE BASE QUERY OF THE IR REPORT
    select sql_query
    into v_base_query
    from APEX_APPLICATION_PAGE_IR
    where application_id=:APP_ID
    and page_id=:APP_PAGE_ID; -- you can only have one IR report per page
    --UNCOMMENT TO VIEW THE PARAMETERS TO THE PACKAGED FUNCTION
    --raise_application_error(-20001, :APP_ID||'-'||:APP_PAGE_ID||'-'||:SESSION||'-'||:P3_BASE_REPORT_ID);
    --GET THE SQL FILTER CODE
    select apex_ir_query.ir_query_where(:APP_ID,:APP_PAGE_ID,:SESSION,:P3_BASE_REPORT_ID)
    into v_where
    from dual;
    --CHECK TO SEE THAT THERE IS A "WHERE" CLAUSE IN THE BASE QUERY
    if instr(upper(v_base_query),'WHERE ') > 0 then
    v_query:=v_base_query||' '||v_where;
    else
    v_query:=v_base_query||' '||v_base_where||' '||v_where;
    end if;
    --UNCOMMENT TO SEE THE FULL QUERY SYNTAX
    --raise_application_error(-20001,v_query);
    --CREATE COLLECTION FROM IR RECORDS
    apex_collection.create_collection_from_query(P_collection_name=>'IR_COLLECTION',p_query=>v_query);
    exception
    when others then
    raise_application_error(-20001, 'Interactive report not found. Contact Administrator. Could not create collection of records.');
    end;
    remember to update P3_BASE_REPORT_ID above to your HIDDEN ITEM name.
    Set the following attributes for the process above
    CONDITIONAL PROCESSING
    CONDITION TYPE = Request=Expression 1
    EXPRESSION 1 --> CONSTRUCT_IR_QUERY (Note: this was set on the branch in step 4 above)
    6) Run the IR report, click on the "SELECT SPECIMENS" button then click on the Session link on the Developer's Toolbar and select VIEW COLLECTIONS from the popup list then click GO. You should now see the IR records.
    By the way I've been testing in IE not Firefox.
    ...and that's it!
    enjoy
    Paul P

  • Hi I'm wondering if I have any chance of getting photos back from a stolen iPhone 4 a 4s and my iPad 3 also to make matters worse my laptop as well I get I'm proberly  dreaming but I have this old iPad and that's it with photos ect of my passed bestie ??

    Hi I'm wondering if I have any chance of getting photos back from a stolen iPhone 4 a 4s and my iPad 3 also to make matters worse my laptop as well I get I'm proberly  dreaming but I have this old iPad and that's it with photos ect of my passed bestie ??

    And Photostream would only have the latest 1000 pictures taken. You photos are in the hand of whomever stole your devices.

  • Hi, my read aloud feature with PDF stopped working. It reports: no US English voice available on thi

    Hi, my read aloud feature with PDF stopped working. It reports: no US English voice available on this system. How can I restore it to read aloud again? Thx, Rick

    I am having the exact same problem... My Text-to-speech just errors out when I select a new voice and then that voice disappears from the choices of voices. I can not get it to speak anything since the Leopard upgrade. Some suggestions would be great as to what might cause this to fail. Thanks

  • How to run a standalone java program with JRC to display/run a report

    Hi All,
    I am new to this forum.
    I am trying to run a java program developed using JRC to run a report created using Crystal Report XI. I stucked because not knowing how to run that java program.
    Can anyone help me? or
    can give a simple java code to do the same.
    Thanks in advance.
    Saravanakumar.

    Hi Saravana
    For the steps to run a standalone application java program with JRC to display/run a report ,please refer the following link.
    http://support.businessobjects.com/communityCS/TechnicalPapers/cr_xi_r2_jrc_deployment.pdf.asp
    You can get the sample code for standalone/desktop applications from the following link.
    http://support.businessobjects.com/communityCS/FilesAndUpdates/crxi_r2_jrc_desktop_samples.zip.asp
    Please do revert in case of any queries.
    Thanks
    Soni

Maybe you are looking for