BISE1 database hangs on shutdown...

When trying to shutdown the BISE1 database via SQL Plus, it just hangs there and does nothing. Any ideas?
Where can I check?
Thank you!

Do the following:
shutdown immediate
startup dba
shutdown
the startup dba is to keep other logons out. There are some process tring to logon...

Similar Messages

Database hangs in shutdown immediate for cold backup

Dear experts ,
we have scheduled cold backup for our database.
is there any solution to resolve below mentioned errors other than RMAN hot backup or shutdown abort ?
Sat Jan 26 00:20:55 2013
Active call for process 3939 user 'oracle' program '[email protected]'
SHUTDOWN: waiting for active calls to complete.
Sat Jan 26 01:15:59 2013
SHUTDOWN: Active sessions prevent database close operation
Instance shutdown aborted

Hi,
should we daily kill these processes with LOCAL=NO
what is proposed solution in such cases ?
is it not harmful for OS or database to kill these processes daily ?Yon can create shell script to find kill session only when you find active calls in your database alert log. You need not have to kill it on daily basis.
Refer MOS tech notes for more details:
*Alert Log: Shutdown Waiting for Active Calls to Complete [ID 1039389.6]*
*What Is The Fastest Way To Cleanly Shutdown An Oracle Database? [ID 386408.1]*
thanks,
X A H E E R

What to do when database hang

Hi all,
May I know what to do when database hangs after shutdown immediate command perform? Can I use kill process command to stop Oracle process?

Hello,
see documentation for details of immediate-clause:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/start.htm#sthref589
You can do an shutdown abort instead, but then sql is terminated. You can read details here: http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/start.htm#sthref595
Greets,
Hannibal

Shutting down database hangs

Dear Gurus,
I m facing a database hang issue while performing the scheduled offline backup.I m able to take the online backup.When the backup starts , the database starts to shutdown.When checked in the log of backup it shows in tail as shutting down database.When checked for user trace , it shows message as "Attempting to kill pid xxxxxxx" and keeps on retrying for n no. of times.Then I have to manually kill the backup and restart the application.Then again try for an offline backup.This time it happens smoothly.This activity we did for couple of weeks .But now from past 3 days even after restarting the backup, it goes to hang mode.In other words unable to perform the backup activity.
The message had been raised to SAP from almost 15 days at very high.They every time ask the logs , and say that the data in log is nt providing much info for analysing the issue or cause of hang.Also enabled the traces of 10400 for trace level 1 ,10 some more traces also.But still the output is not helping even them to analyse the root cause.
Its my observation that this issue is occuring only on ABAP+JAVA systems(CRM &BIW)not in ECC.We are on oracle database 10.2.0.0.4 with latest patch set as suggested by SAP for the same issue.
This issue is h
Please suggest me at the earliest.As need to resolve this at the earliest.
Bye.
Amit

Hi,
No "archive process shutdown avoided" message is there in the log file.
In usertrace i get messages as mentioned below.
bslcrmprddb #more bcp_ora_1257502.trc
Dump file /oracle/BCP/saptrace/usertrace/bcp_ora_1257502.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
ORACLE_HOME = /oracle/BCP/102_64
System name:    AIX
Node name:      bslcrmprddb
Release:        3
Version:        5
Machine:        00C6C4024C00
Instance name: BCP
Redo thread mounted by this instance: 1
Oracle process number: 0
Unix process pid: 1257502, image: oracle@bslcrmprddb
2009-06-05 08:01:36.875
Oracle Instance Startup operation failed. Another process may be attempting to startup or shutdown
Failed to acquire instance startup/shutdown serialization primitive
bslcrmprddb #more bcp_ora_2453676.trc
Dump file /oracle/BCP/saptrace/usertrace/bcp_ora_2453676.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
ORACLE_HOME = /oracle/BCP/102_64
System name:    AIX
Node name:      bslcrmprddb
Release:        3
Version:        5
Machine:        00C6C4024C00
Instance name: BCP
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
Unix process pid: 2453676, image: oracle@bslcrmprddb
2009-06-06 07:04:22.494
Dynamic strand is set to TRUE
Running with 2 shared and 88 private strand(s). Zero-copy redo is FALSE
bslcrmprddb #more bcp_ora_1495266.trc
Dump file /oracle/BCP/saptrace/usertrace/bcp_ora_1495266.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
ORACLE_HOME = /oracle/BCP/102_64
System name:    AIX
Node name:      bslcrmprddb
Release:        3
Version:        5
Machine:        00C6C4024C00
Instance name: BCP
Redo thread mounted by this instance: 1
Oracle process number: 213
Unix process pid: 1495266, image: oracle@bslcrmprddb (TNS V1-V3)
ACTION NAME:() 2009-06-06 03:00:22.223
MODULE NAME:(sqlplus@bslcrmprddb (TNS V1-V3)) 2009-06-06 03:00:22.223
SERVICE NAME:(SYS$USERS) 2009-06-06 03:00:22.223
SESSION ID:(517.13229) 2009-06-06 03:00:22.223
ksukia: Starting kill, force = 0
ksukia: killed 274 out of 274 processes.
ksukia: Starting kill, force = 0
ksukia: killed 0 out of 2 processes.
ksukia: Starting kill, force = 0
ksukia: killed 0 out of 1 processes.
ksukia: Starting kill, force = 0
ksukia: killed 0 out of 1 processes.
ksukia: Starting kill, force = 0
Please suggest.
Regards,
Amit

Primary and Physical Standby databases hanging on sqlplus shell command...

I am primarily a java developer that has had the task of oracle dba thrust upon me due to circumstances that are beyond my control. In the QA lab we have two oracle 10 g release 1 instances running. They set up in a dataguard configuration: one is the primary and the other is in a physical standby.
Last week I noticed that the disk space on the primary database was at 100%. After some investigation I discovered that a good deal of the files taking up space on the box were log files and the best solution that I could think of would be to delete all old archive files. So I deleted the old archive files that were at least two weeks old using RMAN.
During this week the database started to shutdown automatically. The QA associate restarted the database twice using the ‘STARTUP’ command from sqlplus. Additionally, the standby database began to have issues: when login in to sqlplus the application would just hang: no ‘SQL” prompt or anything. Finally today the primary database has also begun to hang in a similar manner.
I have looked at many of the trace files and alert logs but haven’t been able to really discern what the real problem is with the database and the proper rectification for the database. Does anyone have a clue into what is going on? If someone could even point me in the right direction it would be greatly appreciated.

Guessing that your flash recovery area is full, archiving is stopped so the instance appears to hang.
Do you see messages like so in the alert log:
You have following choices to free up space from flash recovery area:
1. Consider changing RMAN RETENTION POLICY. If you are using Data Guard,
   then consider changing RMAN ARCHIVELOG DELETION POLICY.
2. Back up files to tertiary device such as tape using RMAN
   BACKUP RECOVERY AREA command.
3. Add disk space and increase db_recovery_file_dest_size parameter to
   reflect the new space.
4. Delete unnecessary files using RMAN DELETE command. If an operating
   system command was used to delete files, then use RMAN CROSSCHECK and
   DELETE EXPIRED commands.
************************************************************************

10.1.0.4 SUN solaris 8 Database does not shutdown normally

After SAN crash the 10.1.04 database does not shutdown immediate (hanging or..)
I shutdown abort and startup is smooth.
I checked the leftover OS processes looks like none left...
Any sugestion?
TIA

in the alert :12:27:06 2007
Waiting for Job queue slaves to complete
Wed Feb 14 12:28:15 2007
Job queue slave processes stopped
Wed Feb 14 12:33:18 2007
Active call for process 9247 user 'oracle' program 'oracle@solars23 (J000)'
SHUTDOWN: waiting for active calls to complete.
Wed Feb 14 12:47:00 2007
KTSMG_UPDATE_MQL(): MMNL absent for 1201 secs; Foregrounds taking over
oracle 9295 9274 0 12:25:03 ? 0:00 oracle102 (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))

How to find out the info regarding Solaris, server hang or shutdown.

Hi
As I am handling the Solaris 9 Server remotely.
As in last week the server has stopped to respond suddenly, we have tried to ping, ssh which was not working. As ultimately we have asked the Data Centre Team to hard reboot the same, to resolve the issue.
In the same ref I would like to know how we come to know the reason, what caused to reboot the same, i.e . any log file, etc..
I have check /var/adm/messages, but not found any detail for the same.
Thanks
Rajan
I

No core files?
No hope for an answer.
As you learned in the other Internet forum.
http://www.linuxquestions.org/questions/solaris-opensolaris-20/how-to-find-out-the-info-regarding-solaris-server-hang-or-shutdown.-621500/
To get such corefiles analyzed,
you would need to use your service contract and log a support case with Sun.
They have the special software tools to do that.

Oracle 10g Database Hanging twice a day

My database server has 10g with MS 2003 server as OS.
Twice a day the database hangs and does disconnects all the users from local and remote locations.
Current SYSTEM tablespace has a size of 470 MB and is 98.86 in use, when I try to add another datafile as 'SYSTEM02.DBF' in the same path where other system data files are, I kept this operation running during weekends but datafile was not added.
Has it anything to do with the MS 2003 server no. of users.
Any other suggestions for SYSTEM Tablespace to be free.
Please reply.
Thanks
Ajaz Ahmed

Hi friends / sameer,
Sorry for the delay. Here is the attached alert.log file Since the data from foxpro was loaded into oracle on to oracle 10 g from 7th may the problem of database hanging started from the next day. I joined the organization on 22nd july.
Current SYSTEM tablespace has a size of 470 MB and is 98.86 in use, when I try to add another datafile as 'SYSTEM02.DBF' in the same path where other system data file is, it does not add. I kept this operation running during weekends but datafile was not added.
Has it anything to do with the MS 2003 server no. of users.
Any other suggestions for SYSTEM Tablespace to be free.
If you can get me your mail id then I can send the
attachment of alert.log file as [email protected] bounces back.
Thanks
Ajaz Ahmed

Database Hanging

Hi,
I have Oracle database 10g my database is hanging and i want to check what locks occur on which table how can i work on this database hanging process.Kindly help...because i am new for this i need good procedure to face this problem..

If db hangs there could be a lot of possibilities..
eg. no more space for archive log or datafiles
Locks on table are different. You can look on alertlog and start investigating..

Oracle 8i database hangs for the same amount during JDBC calls.

Hi all,
I have a Oracle 8i database on solaris. The database hangs for exactly 61 seconds for a random jdbc call from my Java application, i mean there is no particular pattern or a JDBC call for which the database hangs. If i choose to wait for 61 seconds it returns the results from the database but if i try to access the database with another query(SQL Plus) the first query starts executing immediately. Is that a database configuration problem or some thing else.
And i also get some exceptions occasionally( Maximum Open Cursors exception). Are these two related?
Any feedback is appreciated.
Thanks
Hugo Victor

I have uninstalled Oracle 8i.
Removed all the services from Windows services by deleting corresponding registry entries and deleted the Oracle folder.
I have reinstalled Oracle 8i, this time i changed the name of global database to oracledb.
I channged the tnsnames.ora file from DevSuite appropriately as:
# tnsnames.ora Network Configuration File: C:\DevSuiteHome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = mscserver)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ORACLEDB)
Still it can't login using scott/tiger authentication.
What may be the problem? Please help.
-Sameer

ORACLE DATABASE의 AUTOMATIC STARTUP/SHUTDOWN

제품 : ORACLE SERVER
작성날짜 : 1995-11-21
오라클 database의 AUTOMATIC STARTUP/SHUTDOWN
============================================
시스템이 startup 하면서 오라클도 함께 startup하거나 시스템을 shutdown
할 때 오라클도 같이 shutdown 하는 것이 가능하다. 그 방법은 OS마다 차이가
있는데 여기서는 UNIX 에 기반한 여러 플랫폼에 대해서 알아보기로 한다.
본 내용에서 가장 많이 사용되는 화일은 다음과 같다.
$ORACLE_HOME/bin/dbstart
$ORACLE_HOME/bin/dbshut
/etc/oratab 또는 /var/opt/oracle/oratab
dbstart 와 dbshut 은 오라클을 startup/shutdown 시키는 스크립트인데
이것은 automatic startup/shutdown 시에만 사용하도록 하고 평상 시의
경우에는 사용하지 않도록 한다.
oratab 화일은 일반 텍스트 화일로서 시스템에 설치된 오라클 인스턴스에
대한 정보를 가지고 있는데 보통 3개의 필드로 이루어져 있으며 첫번재
필드는 ORACLE_SID, 두번째 필드는 ORACLE_HOME, 세번째 필드는 Y 또는 N
으로 구성되어 있다. 해당 인스턴스를 autostartup 시키려면 꼭 Y로
세팅되어 있어야 한다.
SYSTEM V
System V 에 기반한 시스템은 /etc/rc<n>.d 디렉토리에 초기화 스크립트를
가지고 있다. 여기서 <n> 은 해당 스크립트의 run-level 을 의미한다.
일반적으로 run-level 0은 power shutdown mode 이고 run-level 2는 multi-user
mode 이다. 각각의 디렉토리에 들어있는 초기화 스크립트는 다음과 같은 형태의
이름을 갖고 있다.
K{two-digit number][descriptive filename]
예를 들면 S75cron, K30tcp 등이 있을 수 있다.
S로 시작되는 스크립트는 startup 시에 실행되는 것이고 K 로 시작하는 것은
shutdown 시에 실행된다.
two-digit number가 의미하는 것은 스크립트가 실행되는 순서인데 숫자가 작은
것부터 먼저 실행된다. 따라서 오라클 스크립트는 보통 다음과 같은 이름을 갖게 된다.
S99oracle, K01oracle
이와 같이 설정하면 시스템이 startup 될 때 모든 초기화가 끝난 후 마지막으로
오라클이 startup 되며 시스템을 shutdown 할 때에는 오라클을 가장 먼저 shutdown
하게 된다.
BSD UNIX
BSD 에 기반한 시스템은 시스템이 startup 될 때 초기화 화일로
/etc/rc*(예를 들면, /etc/rc, /etc/rc.local) 를 사용한다.
시스템을 shutdown 할 때에는 보통은 /etc/shutdown 만 실행하게 되므로
특별히 실행되는 스크립트가 없지만 /etc/rc.shutdown 이 실행되는
플랫폼도 있다.
이제 각 플랫폼별로 자세히 알아보기로 한다.
주의 : <oracle_owner> 는 oracle owner id 로 대체
<$ORACLE_HOME> 은 oracle home directory 명으로 대체
(1)SunOS 4.1.3
SunOS 4.1.3 에서는 /etc/rc.local 을 startup 스크립트로 사용한다. 즉
시스템이 startup 되면서 /etc/rc.local 이 실행된다. 따라서 이 화일의 끝에
다음과 같은 라인을 추가하면 된다.
su <oracle_owner> -c <$ORACLE_HOME>/bin/dbstart
예를 들어 oracle owner 가 oracle7 이고 $ORACLE_HOME 이 /home/oracle
이라면 다음과 같이 해주면 된다.
su oracle7 -c /home/oracle/bin/dbstart
여기서 /home/oracle 대신에 $ORACLE_HOME 과 같은 환경변수를 이용하여
세팅하면 안된다.
SunOS 에서는 시스템이 shutdown 될 때 실행되는 스크립트는 따로 없다.
따라서 dbshut 을 실행시키는 방법은 다음과 같은 스크립트를 만들어서
시스템을 shutdown 시킬 때 /etc/shutdown 을 실행시키지 말고 대신
이것을 실행시켜야 한다.
#!/bin/csh
su <oracle_owner> -c <$ORACLE_HOME>/bin/dbshut
/etc/shutdown $*
만약 오라클을 shutdown 하지 않고 시스템을 shutdown 하면 다음에
오라클을 startup 하려고 할 때 startup이 되지 않는다. 이 경우에는
$ORACLE_HOME/dbs/sgadef<SID>.dbf 화일을 지우고 startup 시키면 된다.
(2)OSF/1(DIGITAL UNIX)
/etc/inittab : 초기화 과정을 콘트롤
/sbin/rc3 : run-level 3 에서 사용되는 script
/sbin/rc0 : run-level 0 에서 사용되는 script
/sbin/rc3.d/S99oracle : /sbin/init.d/oracle 로 link
/sbin/rc0.d/K01oracle : /sbin/init.d/oracle 로 link
/etc/initab 화일에는 초기화 과정에 대한 정보가 들어 있다.
예를 들면 다음과 같다.
s3:3:wait:/sbin/rc3 < /dev/console > /dev/console 2>&1
이렇게 설정하면 run-level 3 일 경우 /sbin/rc3 스크립트가 실행된다.
/sbin/rc3 은 /sbin/rc3.d 디렉토리에 들어있는 스크립트를 실행한다. 만약
스크립트 이름이 K 로 시작하면 이것은 stop 파라미터를 갖고 실행되어서 이
스크립트에 지정된 프로세스를 정지시킨다. 한편, 스크립트가 S 로 시작하면
/sbin/rc3 는 이 스크립트에 startup 파라미터를 부여하고 여기서 지정된
프로세스를 실행시킨다. 따라서 /sbin/rc3.d/S99oracle 을 사용하여
dbstart를 실행한다.
shutdown 과정도 거의 비슷하다. /etc/inittab 에 다음과 같은 라인을 추가
한다.
s0:0:wait:/sbin/rc0 off < /dev/console > /dev/console 2>&1
이것은 /sbin/rc0 를 실행시키는데 /sbin/rc0 는 /sbin/rc0.d 디렉토리에
들어있는 스크립트를 실행시킨다. 스크립트의 이름이 S 로 시작하면 run
time parameter 로 start 를 사용하게 되고 K 로 시작하면 stop 을
사용한다.
따라서 /sbin/rc0.d/K01oracle 스크립트는 stop 파라미터를 갖고
실행되며 이 스크립트는 $ORACLE_HOME/bin/dbshut 스크립트를 실행시켜서
오라클을 shutdown 시킨다.
/sbin/rc3.d/S99oracle과 /sbin/rc0.d/K01oracle은 모두 /sbin/init.d/oracle
에 대한 symbolic link 이다. /sbin/init.d/oracle 에 대한 symbolic link 는
이들 외에 더 있을 수 있다.
(3)Solaris 2.3 & SCO UNIX
/etc/inittab : 초기화 과정을 콘트롤
/etc/rc2 : run-level 2 에서 사용되는 스크립트
/etc/rc0 : run-level 0 에서 사용되는 스크립트
/etc/rc2.d/S99dbstart : /etc/init.d/dbstart 에 대한 link
/etc/rc0.d/K01dbshut : /etc/init.d/dbshut 에 대한 link
/var/opt/oracle/oratab
Solaris 의 경우는 OSF/1 과 매우 유사하다. 차이점이라고 한다면 /sbin
디렉토리 대신에 /etc 디렉토리에 필요한 스크립트가 들어있다는 것이다.
rc0.d, rc2.d 같은 디렉토리는 실제로 /etc 디렉토리에 위치하고 있으며
rc0, rc2 와 같은 스크립트는 /etc/init.d 에 존재하는 같은 이름의 스크립트에
대한 symbolic link이다.
/etc/init.d/dbstart 와 /etc/init.d/dbshut 스크립트의 내용은 각각 다음과
같이 한줄로 구성되어 있다.
su - <oracle_owner> -c <$ORACLE_HOME>/bin/dbstart
su - <oracle_owner> -c <$ORACLE_HOME>/bin/dbshut
Solaris 에서는 start, stop 같은 파라미터는 /etc/init.d/dbstart,
/etc/init.d/dbshut 에서는 무시된다.
/etc/init.d/dbstart, /etc/init.d/dbshut 화일은 owner가 oracle owner id
이여야 한다.
/etc/init.d/README 를 읽어보면 좀 더 자세한 내용이 설명되어 있으니 참조하기
바란다.
(4)AIX
/etc/inittab : 시스템 초기화 화일
/etc/rc : 시스템 초기화 스크립트
/etc/mkitab : /etc/inittab 을 수정하는 유틸리티
/etc/shutdown : 시스템 shutdown 스크립트
AIX 에서는 오라클 autostartup 방법은 여러가지가 가능하지만 shutdown 은
한가지만 가능하다. 우선 autostartup 은 다음과 같은 방법 가운데 하나를
사용하면 된다.
a)/etc/mkitab 를 사용하여 /etc/inittab 에 entry 를 추가한다. 즉,
/etc/mkitab "<oracle_owner>:2:wait:/bin/su <oracle_owner> -c
<$ORACLE_HOME>/bin/dbstart > /dev/console 2>&1"
이렇게 하면 /etc/inittab 화일에 dbstart 기능이 추가된다. 이렇게 하면
시스템이 뜨면서 run-level 2일 경우 오라클이 자동으로 startup 된다.
b)다음과 같은 방법도 가능하다.
/etc/mkitab "rcoracle:2:wait:/etc/rc.oracle > /dev/console 2>&1"
그리고, root 소유의 /etc/rc.oracle 스크립트를 다음과 같이 작성한다.
su <oracle_owner> <<EOF
<$ORACLE_HOME>/bin/dbstart
EOF
c)/etc/rc 스크립트의 마지막에 다음을 추가한다.
/bin/su <oracle_owner> - c <$ORACLE_HOME>/bin/dbstart
AIX 에서 시스템 shutdown 은 /etc/shutdown 에 의한다. 시스템을 내릴 때
오라클을 shutdown 하려면 별도의 시스템 shutdown 스크립트(root 소유로)를
다음과 같이 만들어서 /etc/shutdown 을 사용하지 말고 이것을 사용해야 한다.
#!/bin/sh
/bin/su <oracle_owner> -c <$ORACLE_HOME>/bin/dbshut
/etc/shutdown $*
(5)HP/UX
/etc/rc : 시스템 startup 화일
/etc/shutdown : 시스템 shutdown 실행 화일
/etc/shutdown.d : 시스템 shutdown 디렉토리
HP/UX 에서는 시스템 startup 시에 /etc/rc 가 실행된다. 따라서 다음 라인을
/etc/rc 스크립트의 마지막에 추가하면 auto startup 이 가능해진다.
su <oracle_owner> -c <$ORACLE_HOME>/bin/dbstart
시스템의 shutdown 은 /etc/shutdown 화일을 실행하여 수행된다. 이 프로그램은
/etc/shutdown.d 디렉토리에 들어있는 스크립트를 실행시키는데 다음과 같은
세 가지 방법 가운데 하나로 auto shutdown 을 세팅할 수 있다.
a)$ORACLE_HOME/bin/dbshut 화일을 /etc/shutdown.d 디렉토리 아래에 copy
b)/etc/shutdown.d/dbshut 을 $ORACLE_HOME/bin/dbshut 으로 symbolic link 지정
c)다음과 같은 스크립트 작성
#!/bin/sh
su <oracle_owner> -c <$ORACLE_HOME>/bin/dbshut
단,이 스크립트는 root의 소유이고 root에 의해서만 실행 가능해야 한다.
만약 V6 와 V7 을 동시에 사용하는 경우라면 V7 에서 제공하는 dbshut을
사용하도록 한다.

Dear Alexdelarg,
First launch the "Services" applet from the Windows NT Control Panel. Double-click on the "OracleService<SID>" service and verify that "Startup Type" is set to "Automatic", "Log On As" is set to "System Account", and that the "Allow Service to Interact with Desktop" check box is disabled.
Then launch REGEDIT and check that the Value String ORA_<SID>AUTOSTART within the key My Computer\HKEYLOCAL_MACHINE\SOFTWARE\ORACLE is set to "TRUE".
If the above does not rectify your startup problem, try issuing the following command from the Command Prompt:
<ORACLE_HOME>\bin\oradim -edit -sid <SID> -startmode auto
where <ORACLE_HOME> is the full path of your Oracle8i Server software and <SID> is the Service Identifier of your database.
Hope this helps!

Mac Pro 5,1 hangs on shutdown

I use a 2012 3.33 GHz 6-core Mac Pro 5,1 in my recording studio, running OS 10.9.2 with 16 GB RAM. I use all of the PCIe slots: slot #1 is the ATI Radeon HD 5770 graphics card, #2 is a Universal Audio UAD-2 Quad card for my powered-plugin library, #3 is the Avid Pro Tools HD-Native card and #4 is an OWC Accelsior 120GB 6G SSD which I use as my primary Pro Tools production drive.
Ever since I upgraded to Mavericks and added the Accelsior SSD (this January) the computer hangs on shutdown and occasionally on startup. With shutdown it's the same every time - when I shut it down I get a blank gray screen with only the cursor arrow showing, and I can still move the arrow around. After a few minutes I hit the power button to force it to shut off.
The machine also runs very sluggishly and takes forever to boot up. It almost as if there are a ton of hidden processes bogging it down.
I've checked and re-checked for viruses, I've reset the SMC and PRAM, I use Disk Utility to verify all my drives and repair all the disk permissions about 3 times per week, and I do daily diagnostics with Tech Tool Pro 7. I'm about to pull all the PCIe cards except the graphics card and disconnect all peripherals except keyboard and mouse and then reconnect everything in steps but before I do all that I was wondering if any forum participants have dealt with a similar problem ?
- Lang Doogie

You could try a different SSD than the Mercury model from OWC.
Also, any and even the ones from OWC should have TRIM enabled and you do not.
I have a number of Samsung SSD and just noticed one $110 250GB
http://www.amazon.com/Samsung-Electronics-EVO-Series-2-5-Inch-MZ-7TE250BW/dp/B00 E3W1726/
Different firmware can matter.
http://www.amazon.com/Samsung-Electronics-EVO-Series-2-5-Inch-MZ-7TE250BW/dp/B00 E3W1726/ref=sr_1_1?ie=UTF8&qid=1410381741&sr=8-1&keywords=250GB+SSD

Database Hang Analysis

DB:11.2.0.3
OS :Linux 5
My database is in hung state now. I did the below steps
sqlplus -prelim '/as sysdba'
SQL*Plus: Release 11.2.0.3.0 Production on Thu Oct 24 08:18:17 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
SQL> oradebug setmypid
Statement processed.
SQL> oradebug unlimit
Statement processed.
SQL> oradebug hanganalyze 3
Statement processed.
SQL> oradebug hanganalyze 3
Statement processed.
SQL> oradebug tracefile_name
/oemdwlk1/oracle/diag/rdbms/eioemd1/eioemd1/trace/eioemd1_ora_14132.trc
SQL> exit
Getting the below output in trace file
Processing Oradebug command 'hanganalyze 3'
===============================================================================
HANG ANALYSIS:
ERROR: Can not perform hang analysis dump without a process
state object and a session state object.
( process=(nil), sess=(nil) )
As per oracle doc How to Collect Diagnostics for Database Hanging Issues (Doc ID 452358.1).
Note: From 11.2.0.2 onwards, hanganalyze will not produce output under a sqlplus "preliminary connection" since it requires a process state object and a session state object. If a hanganalyze is attempted, the trace will output:
HANG ANALYSIS:
ERROR: Can not perform hang analysis dump without a process state object and a session state object.
( process=(nil), sess=(nil) )
Is something i am missing or there is some different steps.
===============================================================================

Level 3 --> will collect HANGANALYZE OUTPUT + DUMPS ONLY THE PROCESSES THOUGH TO BE IN HANG.
This many not be a case of process hang. So check with LEVEL 10 .
Still if you are getting the same error than , you need to contact oracle support.
Thanks,
<mod. action: blog ref. removed, please link to one of your blog entries when it's appropriate>
Message was edited by: Nicolas.Gasparotto

On performing continuous delete operation database hangs

Dear All,
On performing continuous delete operation , the instance on which delete operation is performed database hangs i.e it does not allows to make new connection and some times on alert log we get ORA-3136 error
Database version 10.2.0.3 , OS : HP-UXvi3
Regards

Refer this thread
ORA-3136 while performing bulk delete

ERP database did not shutdown

Hi
We have Oracle ERP R12.0.6 running on single node configuration. Usually we take full offline backups on friday morning. Even after issuing the command > shutdown immediate, database did not shutdown for 2 hours as some 'Create accounting' concurrent program was running for past 44 hours. Why database did not kill this session? Is our SGA or redolog files size are not proper?
How to diagnose this issue?
Regards
Ariz

Hi
I reviewed the alert log. When this shutdown immediate was running i was watching alert log and few of them as follows:
Fri May 6 07:04:12 2011
Starting background process EMN0
EMN0 started with pid=24, OS id=1904666
Fri May 6 07:04:12 2011
Shutting down instance: further logons disabled
Fri May 6 07:04:14 2011
Stopping background process QMNC
Fri May 6 07:04:14 2011
Stopping background process CJQ0
Fri May 6 07:04:19 2011
Stopping background process MMNL
Fri May 6 07:04:20 2011
Stopping background process MMON
Fri May 6 07:04:23 2011
Shutting down instance (immediate)
License high water mark = 262
Fri May 6 07:04:23 2011
Stopping Job queue slave processes
Fri May 6 07:04:23 2011
Job queue slave processes stopped
Fri May 6 07:09:22 2011
Active call for process 2142404 user 'oramgrl' program 'oracleSCC@ebsprod'
Active call for process 995354 user 'oramgrl' program 'oracleSCC@ebsprod'
SHUTDOWN: waiting for active calls to complete.
Fri May 6 07:13:56 2011
Incremental checkpoint up to RBA [0xb28.185c2e.0], current log tail at RBA [0xb28.185c3b.0]
Fri May 6 07:23:48 2011
MMNL absent for 1206 secs; Foregrounds taking over
Fri May 6 07:34:01 2011
Incremental checkpoint up to RBA [0xb28.185d1c.0], current log tail at RBA [0xb28.185d1c.0]
Fri May 6 07:47:56 2011
Beginning log switch checkpoint up to RBA [0xb29.2.10], SCN: 3320888564
Thread 1 advanced to log sequence 2857
Current log# 2 seq# 2857 mem# 0: /scclive/oracle/db/apps_st/data/log02a.dbf
Current log# 2 seq# 2857 mem# 1: /scclive/oracle/db/apps_st/data/log02b.dbf
Fri May 6 07:48:46 2011
Completed checkpoint up to RBA [0xb29.2.10], SCN: 3320888564
Fri May 6 07:54:36 2011
Incremental checkpoint up to RBA [0xb29.3372a.0], current log tail at RBA [0xb29.4ba21.0]
Yes, you are right. Using the other session, i had issue shut abort and it has resolved the issue. We have job_queue_processes = 2 and aq_tm_processes=1.
But my concern is, i cannot add >shut abort command in my script. What is the other alternative or what parameter to be tuned? Please guide me.
Regards
Ariz

BISE1 database hangs on shutdown...

Similar Messages

Maybe you are looking for