BizTalk Server 2013R2 SFTP Adapter - Cipher support (BLOWFISH)

Hi,
It appears that the SFTP adapter only supports a subset of commonly used ciphers. I'm trying without success to connect to a server that is using blowfish, without success. There currently seems to be 3 options in the port config - AES, TripleDES and Auto.
I assume auto will negotiate between AES and 3DES - but I wonder if there is any further cipher support ?
Regards, Jason

Agree with you Jason and this
MSDN Blog confirms that currently supported Encryption Ciphers are 3DES and AES. It doesn't support target systems with blowfish at least in this release.
Rachit
Please mark as answer or vote as helpful if my reply does

Similar Messages

Problem with BizTalk server 2013 SFTP adapter on Cloud VM

All,
We have deployed Microsoft Biztalk Server 2013 Enterprise edition on a cloud VM. We are facing an issue with SFTP adapter to receive. Following are the details;
On this VM, we are facing an issue with BizTalk server 2013 SFTP adapter. The SFTP location can receive and send message through SFTP clients and .Net code. But using BizTalk server 2013 SFTP adapter we are only able to send the file on SFTP location but
could not receive the files from same location.
We are getting just one line error in system event log that is :
Event#7011. A timeout (30000 milliseconds) was reached while waiting for a transaction response from the BTSSvc$BizTalkServerApplication service.
Regards,
Shoaib Danish

Hi
BizTalk Server 2013 is available on Windows Azure. BizTalk Server 2013 can be installed locally on your hardware
and in Windows Azure as a virtual machine. Please follow the procedures to check it on your side.
Configuring BizTalk Server 2013 on a Windows Azure VM
Create a BizTalk Virtual Machine in Windows Azure
Create the BizTalk Group Prerequisites
Configure the BizTalk Group
Best regards
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

BizTalk Server 2013 SFTP Adapter with private key - Did not poll any files

Hello,
We have a requirement to connect SFTP secure site with the private key and polling files. Initially I have
tested BizTalk Server 2013 SFTP Adapter receiver Port using Bitvise SSH SFTP Server tool and it was working perfectly in our local network environment( with public private key authentication).
However when we connected to Client SFTP server with private key authentication, It successfully connected to SFTP Server but
did not poll any files from SFTP Site. I added only one file to SFTP Server ( 145 kb file) for testing purpose.
However BizTalk Server 2013 SFTP Send Adapter is working well with the same configuration.
I could not find any errors in Event viewer also. I can download\upload file using WinSCP tool .
So I downloaded nSoftware SFTP Adapter trial version and deployed on server. nSoftware SFTP adapter is also working find
without any issues for Client SFTP Site.
This is the configuration on SFTP Receive Adapter
This is how SFTP Server download folder permission configured. I have got this details using WinSCP tool.
<o:p></o:p>
Appreciate your help on this.<o:p></o:p>
Thanks<o:p></o:p>
PrabathD<o:p></o:p>

BizTalk Adapter for SFTP is where the polling logic is implemented. It is not part of the SFTP Client logic. any SFTP Client is for User Interaction and you do what you want/when you want.
The BizTalk Receive however is for purposes of automation and the adapter polls the receive location using the credentials every polling interval to check for the files matching the filter. When it find a file, it will read and publish to message box or
submit to pipeline for processing. Your setting the polling interval to 0 (ZERO) might actually be disabling the polling.
Set your poll interval to a non-zero value and check the behavior.
Regards.

BizTalk 2013 SFTP Adapter Dynamic SFTP send port exception: Open remote file for write error

I am using BizTalk 2013 SFTP adapter. I defined a Dynamic One-Way
send port on BizTalk server administration.
Below is the error I'm getting on BizTalk while trying to write files to a designated folder on a client's SFTP server.
When defining the same path and properties on a Static One-Way send port everything works properly and the files are being saved on the SFTP server.
A message sent to adapter "SFTP" on send port "ComverseSFTP_1.0.0.0_ComverseSFTP.SendFileToSFTP_SendFileToSFTPServer_f6b86b86a22079f8" with URI "SFTP://abc.xyz.com:22/upload/%SourceFileName%"
is suspended.
Error details: Microsoft.BizTalk.Adapter.SftpInvoker.SftpException: Open remote file for write error.
Server stack trace:
   at Microsoft.BizTalk.Adapter.SftpInvoker.SftpInvoker.OpenRemoteFileWrite(String fileName, Int32 fileOffset)
   at Microsoft.BizTalk.Adapter.SftpInvoker.SftpFileWriterStream.Write(Byte[] buffer, Int32 offset, Int32 count)
   at Microsoft.BizTalk.Adapter.Sftp.SftpOutputChannel.Send(Message message, TimeSpan timeOut)
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
Exception rethrown at [0]:
   at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
Exception rethrown at [1]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at System.ServiceModel.Channels.IOutputChannel.EndSend(IAsyncResult result)
   at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.SendCallback(IAsyncResult result)
MessageId: {926F44F2-9180-4B33-96FF-9E4CBC459382}
InstanceID: {36A50A7F-63C4-48D9-903D-A33C85DDAE36}
Can you please assist with explaining why are we getting this exception?
Thank you for your help.

Below is the error I'm getting on BizTalk while trying to write files to a designated folder on a client's SFTP server.
When defining the same path and properties on a Static One-Way send port everything works properly and the files are being saved on the SFTP server.
A message sent to adapter "SFTP" on send port "ComverseSFTP_1.0.0.0_ComverseSFTP.SendFileToSFTP_SendFileToSFTPServer_f6b86b86a22079f8" with URI "SFTP://abc.xyz.com:22/upload/%SourceFileName%"
is suspended.
Error details: Microsoft.BizTalk.Adapter.SftpInvoker.SftpException: Open remote file for write error.
Hi Yaeli1,
From the error message above, please check the permission for file writing , it seems that this issue is related to access permission.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

BizTalk 2013r2 SQL Adapter 64bit?

I have recently configured a new server for BizTalk 2013r2 Standard Edition and ESB Toolkit.
On my first check to test routing to the ESB Exception Db was working ok, the following error was raised from Microsoft.Practices.ESB, All.Exceptions:
"The send adapter for this send port is not supported on 64-bit host instances. Please make sure that the send adapter is associated with a 32-bit only handler. "
I have the All.Exceptions send port configured to run under a host I've called "SendHost" which is configured to 64bit. I know previous versions of the SQL adapter were 32bit only but I thought this had been upgraded since BizTalk 2010, or possibly
even before.
Maybe the fact that I'm using Standard edition is significant? Any suggestions welcome.
Thanks,
Rob.

"The send adapter for this send port is not supported on 64-bit host instances. Please make sure that the send adapter is associated with a 32-bit only handler. "
I know previous versions of the SQL adapter were 32bit only but I thought this had been upgraded since BizTalk 2010, or possibly even before.
Maybe the fact that I'm using Standard edition is significant? Any suggestions welcome.
No, the legacy SQL Adapter is only supported in 32-bit Host Instances. That has never changed, nor is is likely to.
All editions of BizTalk Server 2013 R2 support 64bit processes on 64bit Windows.
You have to create a 32bit Send Host for the legacy SQL Adapter.

BizTalk 2013 SFTP Adapter : Host Instance configured for SFTP Receive cause high CPU usage

Hi,
Our BizTalk 2013 Server test env have 16 GB RAM. We have one SFTP Receive Location which is using a dedicated Host instance for SFTP receive.
As soon as we start this SFTP Host Instance it starts consuming 50-60% CPU. (Even when it is not handling any file receive)
As suggested in below thread, to fix this issue, we changed the SFTP RL default configuration. i.e. Changed polling interval from default 0 sec to
10 minutes and also changed the RL Schedule window to business hours only.
https://connectedpawns.wordpress.com/2014/04/13/biztalk-2013-sftp-adapter-biztalk-host-receiving-throttled-because-processmemory-exceeded-the-configured-throttling-limit/#comment-2602
Even after changing the RL configuration , the Host Instance continuously consumes ~60% CPU.
Any suggestions to troubleshoot more on this issue ?
Thanks in advance !!
Anoop

This is one of the issue which has already been raised to Microsoft and hopefully a public build will be available soon in next cumulative update pack .
There are variety of reason for this starting for password mismatch or password not given , SFTP adapter unable to connect and so on .
There is good post here in below link for this issue
http://thoughtsofmarcus.blogspot.co.uk/2013/06/leaving-password-blank-in-biztalk-2013.html
Another greate artcicle is by Nino which states these issues .SFTP adapter is protocol sensitive and some configuration by server side, can cause a lot of crazy situations
http://ninocrudele.me/2014/01/29/checkstat-and-sftp-adapter-issues/
Thanks
Abhishek

BizTalk 2013 SFTP adapter not polling

Hi,
I am trying to poll some files from an SFTP location. I have configured my SFTP Receive Location on the BizTalk Server 2013. However I do not see any polling happening.
I have a BizTalk Server 2006 R2 environment from where I have configured the polling from the same location (this is ofcourse stopped when using the BizTalk 2013). From here, the polling is happening fine (bLogical sftp adapter).
Can you please let me know if I am missing any other steps apart from the RL configuration.
Regards,
Ujjwal
-Ujjwal

Though you have been using SFTP process with your BizTalk 2006 environment, your new BizTalk server may have new IP and new configurations. So ensure the SFTP server where
you’re trying to receive the files from allow this new server.
First try to use any SFTP client tools like
FileZilla or
WinSCP and see whether you can connect to your SFTP server. This would help you to solve some of the access issues.
Ensure your IP (external IP) is not blocked by your SFTP server. If any firewall is involved between, check this firewall is not blocking the access.
Also ensure that values you give while configuring the Security section of the Receive Location is correct. Most of the issues around the SFTP adapter trying to receive the
files are Firewall issue, Security properties configuration.
Also check
this SFTP adapter article from TechNet Wiki for more help..
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Does Seeburger's SFTP adapter support dynamic filename creation

Hi all,
Does the SFTP adapter support dynamic filename creation.
If yes, then do we have to use UDF's and are there any specific settings that have to be done in the SFTP communication channel.
Please provide a blog which helps in the configuration process of the above case.
thanks,
younus

Dynamic Creation of File using counter in Seeburger Variable:
1. Configuration Needed in the Communication Channel:
The process of dynamic creation of files can be done we have to select the following checkbox in the receiver channel:
Dynamic Attribute in receiver Channel:
Import the following modules:
Localejbs/Seeburger/solution/sftp
Localejbs/Seeburger/AttribMapper
Localejbs/ModuleProcessorExitBean
Enter the desired file naming convention:
Use the Parameter GetCounter("ID") to the place where the counter is expected to come.
2. Configuration Needed in the SeeBurger Workbench:
If the J2EE server is listening on a port different from 50000 (which is the standard for the SAP client 000), the port number must be configured:
Login into the seeburger workbench using the URL
http://<localhost>:<port number>/seeburger/index.html
Select Property Store.
Create or edit the following property:
Parameter
Value
Namespace
http://seeburger.com/xi/SeeFunctions
Key
provider.servlet.server
Value
http://localhost:50000/ (where the port number 50000 must be set
accordingly to the J2EE server configuration).
Note: The configured value (server URL) has to end with a slash (/). Otherwise,
SeeFunctions will not work correctly.
If we need to start the counter from any specific value , it can be configured in the SeeBurger workbench, this value can be maintained in Mapping Variables :

Getting error while setting SFTP adapter properties dynamically in Biztalk 2013

Hi ,
I am getting error while doing setup SFTP adapter in biztalk 2013.
Error details: Microsoft.BizTalk.Adapter.SftpInvoker.SftpException: Create SFTP facade error.
Server stack trace:
at Microsoft.BizTalk.Adapter.SftpInvoker.SftpInvoker..ctor(String host, Int32 port, String username, String password, String key, String privateKeyPassword, Boolean acceptAnyserverKey, String expectedServerFingerPrint, String proxyhost, Int32 proxyport,
String proxyuserName, String proxypassword, Int32 proxytype, Int32 encryptionType, Boolean isKeyData)
at Microsoft.BizTalk.Adapter.Sftp.SftpConnection.OpenUnderlyingConnection(SftpConnectionProperties connectionProperties)
at Microsoft.BizTalk.Adapters.CommonHelpers.Connection`3.ConnectionPool`3.GetConnection(T1 connectionProperties, TimeSpan timeout)
at Microsoft.BizTalk.Adapters.CommonHelpers.Connection`3.GetConnection(T connectionProperties, TimeSpan timeout)
at Microsoft.BizTalk.Adapter.Sftp.SftpOutputChannel.Send(Message message, TimeSpan timeOut)
at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
Exception rethrown at [0]:
at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
Exception rethrown at [1]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.Channels.IOutputChannel.EndSend(IAsyncResult result)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.SendCallback(IAsyncResult result)
MessageId: {1059433E-B2D4-4394-8277-C31BDFC00553}
InstanceID: {BED31F04-E764-446D-A587-65B1F72F7A98}

Hi Abhay,
Can you pls explain what are you trying to achieve here? Little bit about your solution/requirement and the way you implementing things?
As you have mentioned that you are setting the SFTP adapter properties dynamically within your orchestration, can you share the code where you are assigning the properties and constructing the message?
Rachit

BizTalk Adapter Pack support for Oracle Database 11.2

Hi All,
Is there a BizTalk Adapter Pack release that officially supports Oracle Database 11.2.0.3
Thanks
Steve

Hi,
The BizTalk 2010 adapter pack for the Orace adapter also supports 11.2
See also:
BizTalkServer 2010 Oracle 11g Release2
http://social.msdn.microsoft.com/Forums/en-US/508063f5-b370-406c-a703-842db787b2cf/biztalkserver-2010-oracle-11g-release2?forum=biztalkr2adapters
Kind regards,
Tomasso Groenendijk
Blog
| Twitter
MCTS BizTalk Server 2006, 2010
If this answers your question please mark it accordingly

Issues with creating and sending BOM XML IDOC to SAP using 2010 WCF-SAP Adapter (without using Biztalk Server)

I'm trying to replace an existing Biztalk 2006 Send BOM IDOC process, and completely remove Biztalk server from the equation. The existing Bizatalk 2006 server receives an input BOM (Bill of Materials) flat file, and using a Biztalk Map (BM08),
and Orchestration, generates an Idoc and sends it to SAP.
In my replacement C# program, I'm using the 2010 WCF-SAP Adapter, and am trying to generate the BOMMAT03 XML IDOC it to SAP.
I generated the BOMMAT03 schema from SAP using the Add Adapter Service in VS 2010. I was able to generate a BM08 XSLT from the existing BMO8 map in the current Biztalk 2006 process. I am able to run a XSLT transform on the input BOM flat
file, and generate an XML file from that.
However, I've run into a few issues. First of which, is that the XML file that is generated from the XSLT transform is NOT the same schema as the BOMMAT03 schema expects. It's somewhat similar, but different enough that I have to manually
translate between the two in my code. I've verified that both the original Bitztalk 2006 process and my replacement program use BOMMAT V3 from SAP. Question--Is Biztalk 2006 server doing some other magic to turn that transormed XML into the BOMMAT03
schema?
I ended writing code which translates the transformed XML into the BOMMAT03 schema (which is a strong typed XML IDOC at this point).
However, when I try to send the BOMMAT03 XML IDOC, I get an exception "Object reference not set to an instance of an object."
idocClient.Send(idocData, ref sadapterTxGuid);
idocData is of type BOMMAT03, and I've verified that the various fields are populated.
Any help is appreciated.

Well, putting in a MSDN subscription support ticket for Biztalk server actually helped with the issue. They didn't find, or fix the issue directly. But one of the examples (https://randypaulo.wordpress.com/tag/idoc/) they sent over, jogged my
memory, and I realized in the code snippet below, I had accidentally deleted the 1st line. Such a simple mistake, yet was easy to overlook. The URL example is almost EXACTLY like my code, but without the transform and translation code to convert
from input XML file to IDOC XML. If someone is interested in that, let me know.
//Forgot the 1st line.
idocClient = new IdocBOMMAT03SIEIS_WED_BOMMAT03V3R700Client(binding, endpointAddress);
idocClient.Send(idocData, ref sadapterTxGuid);
For anyone else interested in knowing, you CAN send a strongly typed IDOC to SAP using C#.NET and the WCF SAP 2010 Adapter, using the IDOC Binding Client class you generated using the Add Adapter Service Reference in VS2010.
The one difference, which no one, not even the tech support from MS could tell me, was why the XSLT which I generated from the original map, did not transform the input BOM XML into the BOMMAT03 XML. Instead, it transformed it into an intermediate
XML, which resembled the BOMMAT03 IDOC XML, but still needed to be translated to the BOMMAT03 IDOC format.
The tech support person swore up and down that it should. But I believe that something happens in Biztalk server, after the Mapping occurs, maybe in the Pipeline, which converts that
intermediate XML into the final BOMMAT03 IDOC XML format.
I do think that the examples are severely lacking in showing how to send a strong typed IDOC using C# and the WCF-SAP Adapter. Even worse, the examples are completely lacking in how to actually generate a weakly typed IDOC. They show how to send
that weakly typed IDOC, but show me, or give me a class to be able to generate it.
I realize that this is not quite the "recommended way" to do it, but in reality, not everyone wants or even needs a full Biztalk installation. For some simple stuff like this, a C#.NET program and WCF-SAP adapter do the trick.

Getting Server Error Code: -2147024891 when using Biztalk Windows SharePoint Services Adapter to upload a document

We are currently running
1. BizTalk Server 2013 R2
2. SharePoint 2013
both in a Windows 2012 Server environment, in Azure.   The BizTalk and SharePoint are running on separate machines.
I am using the Windows SharePoint Adapter to upload a Tif file to a SharePoint document library. However, when the host instance is running under my team member's userid, I get the following error in the eventlog:
The adapter failed to transmit message going to send port "SendOwnershipToSharePoint" with URL "wss://bp1amsapt218:34392/sites/BiztalkSc/Lists/Ownership". It will be retransmitted after the retry interval specified for this Send Port.
Details:"[Microsoft.SharePoint.Client.ServerUnauthorizedAccessException] Access denied. You do not have permission to perform this action or access this resource. Server Error Code: -2147024891Trace:    at Microsoft.SharePoint.Client.ClientRequest.ProcessResponseStream(Stream
responseStream)
   at Microsoft.SharePoint.Client.ClientRequest.ProcessResponse()
   at Microsoft.SharePoint.Client.ClientRequest.ExecuteQueryToServer(ChunkStringBuilder sb)
   at Microsoft.SharePoint.Client.ClientRequest.ExecuteQuery()
   at Microsoft.SharePoint.Client.ClientRuntimeContext.ExecuteQuery()
   at Microsoft.SharePoint.Client.ClientContext.ExecuteQuery()
   at Microsoft.SharePoint.Client.Web.WebUrlFromPageUrlDirect(ClientContext context, Uri pageFullUrl)
   at Microsoft.BizTalk.KwTpm.WssAdapter.ClientOmAccessor.RequestInfo..ctor(String siteUrl, String sharePointOnlineUsername, String sharePointOnlinePassword)
   at Microsoft.BizTalk.KwTpm.WssAdapter.ClientOmAccessor.ListsAccessor..ctor(String siteUrl, String sharePointOnlineUsername, String sharePointOnlinePassword)
   at Microsoft.BizTalk.KwTpm.WssAdapter.ClientOmAccessor.ListsAccessor.TryOpenWebSite(String siteUrl, String sharePointOnlineUsername, String sharePointOnlinePassword, Exception& lastError)
This error was triggered by the Windows SharePoint Services receive location or send port with URI wss://bp1amsapt218:34392/sites/BiztalkSc/Lists/Ownership.
Windows SharePoint Services adapter event ID: 12310".
This userid has already been added to the following groups on the BizTalk Server:
Local Administrators Group
BizTalk Server Administrators
SSO Administrators
BizTalk Isolated Host Users
BizTalk Application Users
I have also made sure the userid has full control access to the SharePoint site and the document library within the site.   I have confirmed that the user with this userid is able to access the SharePoint site and can upload documents to the
document library, manually.   However, when the host instance is running under this userid, I am not able to upload documents to the SharePoint document library.
The Windows SharePoint Services Adapter is configured with the following values:
Adapter Web Service Port:   34392
Timeout:   100000
Use Client OM: Yes
Destination Folder URL: Lists/Ownership
FileName: test.tif
Overwrite: Yes
SharePoint Site URL:
http://bp1amsapt218:34392/sites/BiztalkSc/
Microsoft Office Integration: No
Do you know what the cause for this error is?   We urgently need a resolution for this?

If you create an XML document and upload it to the Windows SharePoint Services Web site. The Windows SharePoint Services adapter will take that message, archive it in the Archive document library, and then send it to the Destination document library. This
procedure demonstrates how a document flows from a Sharepoint web site, through BizTalk Server, and to a Sharepoint Services Web site using the Windows Sharepoint Services adapter.
This MSDN library article shows the procedure, please check whether it will be helpful to troubleshoot.
Create a working directory
Create an XML file
Upload the XML file
See: https://msdn.microsoft.com/en-us/library/aa560513.aspx

Receiver SAP SFTP adapter-errorlog on SFTP server

Experts,
I am using receiver SAP SFTP adapter to connect to an SFTP server and send files.Receiver SFTP server is a VMS system.I could able to write the files to home directory of the user that has been given,but apart from writing the files I am seeing warning log file in the the target folder on SFTP server like below description.I am giving dot(.) in the file path to write the files to the default directory that has been assigned to the user given by receiver SFTP server team.
WARNING: ssh_file_server_receive_proc: platform cannot stat() filename /home/dir1/dir2 ./TestFile(TestFile is my file name) .
Just to test,we placed files in the receiver SFTP server using same user and password as the PI recv SFTP channel with command line and winsCP client tool,but we don't see any error logs on the server with WinSCP tool or command line transfer of the files.Log file with above warning is generating only when we place files on the server using SAP SFTP adapter in the recv channel of PI.
Please let me know,if you have any insight or seen similar issue.
Thank you,
Sri

Hi Poonam - Blogs on SFTP : Just search for SFTP and filter by blogs/documents.. you can find many..
>>> http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/305eeb5b-81e7-2f10-d8aa-9216de04ca3e?QuickLink=index&overridelayout=true&57075820413417
http://scn.sap.com/docs/DOC-35572
I read in some of the SDN forum that SFTP adapter doesnt have the capability to read the files from multiple directories. So, if we get any requirement to read the files from multiple directories using sftP, why could be a possible solution for this requirement?
>>> Yes. It is only possible with NFS.
You have to define multiple channels/interfaces...

Sequential files proccessing using SFTP adapter in Biztalk

Hi All,
I want pick the file by sequential from receive location by using SFTP adapter.
Can anybody please tell me What is the process flow of sequential picking the file in biztalk??
Thanks In advnce
Prabhakar

You can check the following links
http://msdn.microsoft.com/en-us/library/aa561967.aspx
http://social.technet.microsoft.com/wiki/contents/articles/6378.biztalk-instance-subscription-and-convoys-details.aspx
http://geekswithblogs.net/michaelstephenson/archive/2009/01/01/128295.aspx
http://abdulrafaysbiztalk.wordpress.com/2009/10/20/enterpriseintegrationpattern_resequencer/
http://www.cloudcasts.net/ViewWebcast.aspx?webcastid=2521599811294205439
for picking up file from sftp you need to use either
builtin sftp adapter in for BizTalk 2013 or open source sftp adapter for earlier versions
I hope this will help you

Can we make server fingerprint field optional instead on mandatory in SFTP adapter

Dear All,
We are integrating SAP HCM with Success-factor only for Employee profile as client is only using the "SF PMS" module.
ABAP program(installed through SH addOn provided by SAP) is generating the Employee profile ".csv" file.
I am developing a bypass scenario to transfer that ''.csv" file to SuccessFactors SFTP server. However, SuccessFactors SFTP server team is not ready to provide me their "server fingerprint", and they are claiming this info is not required to develop interface in PI. The Authentication mode in SFTP communication channel is "Password" based instead of "Private key".
Experts please help me understand is there any possibility to make this field optional? if not what else I can try here?
Thanks,
Farhan

Hi Farthan,
Server Fingerprint is the mandatery field to fonfigure the SFTP adapter. kindly check with your admin team to login thorough CoreFTP, it will be genarte and display the Server fingerpring.
please go through the below log.
http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/04/11/sap-sftp-sender-adapter-a-quick-walkthrough
Regards
Srinivas

BizTalk Server 2013R2 SFTP Adapter - Cipher support (BLOWFISH)

Similar Messages

Maybe you are looking for