Bizzare problem

I am using a bean to upload a file from a JSP. If the file exceeds some preset limit in size the constructor to the bean throws an IOException. The JSP should catch this and redirect to another JSP. However the processing page (the one that catches and should redirect) is comming up as a 'Cannot find server' style page. If I then refresh this page it redirects as it should have in the first instance.
No error is coming up in the tomcat consol.
The same thing happens if I omit the try-catch and use a
<%@ page errorPage="action_failed.jsp" %>
tag...
does anyone know what's going on?

the processing page (the one that catches and should
redirect) is comming up as a 'Cannot find server'
style page. If I then refresh this page it redirects
as it should have in the first instance.Does it come up with the 'Cannot find server' error instantly? It sounds like a problem with the cache. Try clearing out your cache and trying it again. You can also modify the jsp to tell the browser not to cache it.

Similar Messages

BIZZARE PROBLEM ! N200 cannot browse the Internet but email is working HELP

Bizzare problem I have a Lenovo N200 running Vista Home Premium. The machine was running perfectly until Monday. At the moment I cannot access the Internet. The bizzare thing is that my email works fine and I can send and receive email. But I cannot surf the web on IE. I even installed Firefox and still cannot access the Internet. I have checked the network settings. I am using a LAN cable. The settings are fine. I reset the adapter. I have taken off the anti virus and reinstalled. The weird thing is if I go into the Lenovo recovery while booting up I can access the web on that browser. In Vista in Command Prompt I am able to ping www.google.com and I get a responce. I simply cannot access the Internet from any browser in Vista. Can anyone help? Any ideas? Thanks Mike

Bizzare...
Have you checked your firewall settings? I know that non-Windows firewalls, if not loaded properly, can block all incoming data. I remember when I uninstalled ZoneAlarm on my main PC once, all data was blocked. And on my Sygate Personal Firewall, if it isn't loaded when Windows boots, any new problems won't be able to use the net until its loaded and exempted from blocking. (This could happen to Windows Firewall too, but I'm not sure).
If that doesn't fix it, not sure what then.

Bizzare Problem Loading Profiles

We've been successfully using photoshop for many years now and have never seen such a bizarre issue. We are trying to load our own profile. We have created the profile with an "eye-one spectrometer". We are loading the profile and placing it correctly in the folder that we always have in the past; We have a Mac so it's loading in "Macintosh HD/Library/Colorsync/Profiles". We put the profile in there no problem, and it shows up and seemingly reads just fine. My finder on my Mac can see it, I can see it if I go into the folder and view it, and our eye-one spectrometer recognizes it. Now, when I go into Photoshop and go "Photoshop Manage Colors" in the "color handling" tab I get the "Printer Profile" tab.
Now here's the problem: My profile is simply not there. There's a million other profiles from other times that we've loaded profile. There's even a profile that I loaded 5 hours ago, but it will not show any profiles that we try and put in it since then. We have restarted photoshop and the computer a bunch of times, we have renamed the profile, we've tried putting in different profiles, and photoshop will simply not recognize anything that we put in there since the last one we loaded 5 hours ago.
What gives?! Thanks in advance, any help is greatly appreciated!

PrintMagic wrote:
…hate to ask another question but now it's not reading my profile!!!!! I can find it and it selects it and everything is fine but it just won't print as if it's using the profile…
Verifying a profile remotely is next to impossible. We would have to have the same printer and paper available, and I don't.
My next step would be to check out the profile with the ColorSync Utility's Profile First Aid function.
I've never heard of a profile being OS dependant; but then, I'm still using Tiger 10.4.11 and have stayed away from the Leopards.
What I'd be more inclined to suspect is some setting somewhere along your color management workflow path.
Wo Tai Lao Le
我太老了

Neo 2 Platinum - Bizzare Problem

Ok before we get to the nitty gritty, here's my specs
AMD Athlon 64 3200+ venice core
2gb Geil Value PC3200 DDR RAM 8-4-4-3 cas 3.0 (2x 1gb dimms)
MSI K8N Neo2 Platinum BIOS 1.b
XFX Geforce 6800 GT 256MB
2x Seagate Barracuda 80GB 7200RPM in SATA RAID 0 Stripe
Pioneer DVD ROM
PSU - Hiper Power HPU-4S425
Specs from PSU follow.. as printed on the side i dont understand much of it
AC Input 100-120Vac / 200-240Vac 8/5A 60/50Hz
DC Input +3.3v +5v +12v1 +12v2 -12v -5vsb
Max Output Current 28A 30A 16A 15A 0.8A 2.5A
MAX Combilnes Wattage
230W 320W 9.6W 12.5W
405W 22.1W
Peak Load 425W
I have just set this board up and encountered thi problem from the start, the problem is that when my pc runs for a bit then is rebooted from windows xp Sp2, it simply turns off, then cannot be started, the fans start then it tries to power up and then dies again.
however, if the system is left alone for a while and you try to turn it on again, it works, untill you either shutdown or reboot and then its back to square one.
any suggestions guys and girls?
codiak

its all good im fixed, it seems that my PSU has 4 fan settings, low medium high and auto, mine was on auto and i guess the thermometer has failed, so it was getting too hot, so now set fan on PSU to high, no probs.
thanks for replies all the same

Help with bizzare problem with WRT54G router

I have a WRT54G v2.2 router connected to 1 PC running Linux and a laptop running Windows XP which are both connected via Ethernet cable. The router is connected to a Netgear ADSL modem.
The issue which has occurred only recently is that the laptop has been blocked from accessing all sites except www.ninemsn.com.au.
The other PC can access all sites without issue.
I have tried restoring factory defaults, hard reset (using reset button and power down sequence) and updating to the current firmware. Nothing seems to unblock web access for the laptop.
I have connected the laptop to the ADSL modem directly and confirmed I can access any site. I have tried also booting to a Linux demo CD on the laptop, and this has had the exact same symptoms, which rules out the OS.
Running a netstat -a after opening a browser window to google.com.au shows an active connection, but the browser waits indefinatly for a reply.
Tried swapping the 2 ports around and also the Lan cable to no effect. Tried enabling the wireless adapter on the laptop and connect via wireless, but had the same symptoms.
I am at a complete loss as to why this has suddenly occured. The same configuration has been running fine for about 2 years.
Any suggestions?
Message Edited by dean70 on 11-11-2008 06:36 PM

Enable DMZ on your router...To enable DMZ follow the link The link shows how to enable DMZ on wrv54g but you can still follow the link.

ImageWriter and ByteArrayOutputStream problem

I am working with multipage images and there's bizzare problem I stumbled on regarding, I guess, flushing streams
When I use ByteArrayOutputStream then ImageWriter writes only 146 bytes to it. When I use FileOutputStream
It works fine.
Here's my code snippet (FileUtils is a class is from org.apache.commons.lang)
                ByteArrayInputStream bais = new ByteArrayInputStream(FileUtils.readFileToByteArray(f));
                ByteArrayOutputStream baos = new ByteArrayOutputStream(bais.available());
                ImageInputStream iis = ImageIO.createImageInputStream(bais);
                tiffReader.setInput(iis);
                ImageOutputStream ios = ImageIO.createImageOutputStream(baos);
                tiffWriter.setOutput(ios);
                TIFFImageWriteParam param = new TIFFImageWriteParam(Locale.US); // (TIFFImageWriteParam) tiffWriter.getDefaultWriteParam();
                param.setCompressionMode(ImageWriteParam.MODE_EXPLICIT);
                param.setCompressionType("CCITT T.6");
                //System.out.println("PhotoInterp = " + param.getPhotometricInterpretation());
                int page = 0;
                tiffWriter.prepareWriteSequence(tiffReader.getStreamMetadata());
                while(true) {
                    try {
                        IIOMetadata metadata = tiffReader.getImageMetadata(page);
                        BufferedImage img = tiffReader.read(page);
                        //tiffWriter.writeToSequence(new IIOImage(img,null,metadata),param);
                        tiffWriter.writeToSequence(new IIOImage(img,null,null), param);
                        //tiffWriter.writeInsert(page, new IIOImage(img,null,null),param);
                        page++;
                        //ios.flush();
                    }catch(IndexOutOfBoundsException e) {
                        // all pages done
                        break;
                tiffWriter.endWriteSequence();
                ios.flush();
                FileUtils.writeByteArrayToFile(new File(devDir, newName), baos.toByteArray());

If i remark second part of code and open first part of code that is not working
public String GPS() {
String NMEA = "";
try {
int ch;
boolean beg = false;
String Answer = "";
byte[] buffer = new byte[512];
ByteArrayOutputStream bout = new ByteArrayOutputStream();
while ( (ch = inStream.read(buffer)) != -1) {
bout.write(buffer, 0, ch);
NMEA = bout.toString();
bout.flush();
bout.close();
/* while (inStream.available()>0) {
if (inStream.available() > 0) {
ch = inStream.read();
if (ch == 0x24) {
beg = true;
if (ch == 0x2A) {
beg = false;
if (Answer.indexOf("GPRMC") >= 0) {
NMEA = Answer;
Answer = "";
if ( (beg) & (ch != 0x24)) {
Answer = Answer + (char) ch;
catch (Exception e) {
try {
// InitGPRSConnectionUDP(e.getMessage());
sendline(e.getMessage());
catch (Exception r) {
return NMEA;
but If i remark first part of code and open second code that is working. I have packet from test sending from pc.
public String GPS() {
String NMEA = "";
try {
int ch;
boolean beg = false;
String Answer = "";
/* byte[] buffer = new byte[512];
ByteArrayOutputStream bout = new ByteArrayOutputStream();
while ( (ch = inStream.read(buffer)) != -1) {
bout.write(buffer, 0, ch);
NMEA = bout.toString();
bout.flush();
bout.close();
while (inStream.available()>0) {
if (inStream.available() > 0) {
ch = inStream.read();
if (ch == 0x24) {
beg = true;
if (ch == 0x2A) {
beg = false;
if (Answer.indexOf("GPRMC") >= 0) {
NMEA = Answer;
Answer = "";
if ( (beg) & (ch != 0x24)) {
Answer = Answer + (char) ch;
catch (Exception e) {
try {
catch (Exception r) {
return NMEA;
Edited by: TC65 on Jan 15, 2008 10:19 AM

Strange problem with AIX server and windows clients

I am having a real bizzare problem with WLS 7.0.1 running on AIX 5.1 and
clients on windows. We have J2SE Swing application as a client.
If the client is w2k or XP, the first client gets good response. If I start
another client the second client is horribly slow (2 sec vs 16 sec). Even if
I kill the first client the second client continues to be slow. If I have 2
clients open together, the first one continues giving 2 sec response while
the second one continues with 16 sec. For that matter if I start another
client after shutting down first one I get slow (16 sec) response.
If the client is NT client I always get good and consistent response from
the server. Irrespective of how many client I have on the NT machine, I keep
getting good response. NT and W2K laptops are seating right next to each
other on the same n/w and infact the NT is a much slower and lessor memory
machine than W2K.
We did similar tests keeping server on Solaris or NT server or W2K server,
and the clients "behave" normally i.e I get consistent repsponse time (it
may be slow or fast, but it is consistent and is consistent b/w NT and W2K).
We even tried putting my laptop on the same network as the AIX server, but
it did not help. Unfortunately some of our clients will be using AIX and
W2K.
HELP!!!!

"Cameron Purdy" <[email protected]> wrote in message
news:[email protected]..
Sounds like a reverse DNS lookup or similar network timeout.Thanks for the suggestion, but then why would the first client on w2k or XP
get a better performance and the subsequent clients get worse performance?
>
Peace,
Cameron Purdy
Tangosol, Inc.
http://www.tangosol.com/coherence.jsp
Tangosol Coherence: Clustered Replicated Cache for Weblogic
"vinay moharil" <[email protected]> wrote in message
news:[email protected]..
I am having a real bizzare problem with WLS 7.0.1 running on AIX 5.1 and
clients on windows. We have J2SE Swing application as a client.
If the client is w2k or XP, the first client gets good response. If Istart
another client the second client is horribly slow (2 sec vs 16 sec).
Even
if
I kill the first client the second client continues to be slow. If I
have
2
clients open together, the first one continues giving 2 sec response
while
the second one continues with 16 sec. For that matter if I start another
client after shutting down first one I get slow (16 sec) response.
If the client is NT client I always get good and consistent responsefrom
the server. Irrespective of how many client I have on the NT machine, Ikeep
getting good response. NT and W2K laptops are seating right next to each
other on the same n/w and infact the NT is a much slower and lessor
memory
machine than W2K.
We did similar tests keeping server on Solaris or NT server or W2Kserver,
and the clients "behave" normally i.e I get consistent repsponse time(it
may be slow or fast, but it is consistent and is consistent b/w NT andW2K).
We even tried putting my laptop on the same network as the AIX server,
but
it did not help. Unfortunately some of our clients will be using AIX and
W2K.
HELP!!!!

Screen Goes Blank, Hard Drive Stuck, Cannot Re-Install, or recover

I have somewhat a bizzar problem that even with several years of IT experience I seam not to be able to figure it out. I thought I toss it our here at Toshiba community in hopes of people's collective experience shedding some lights on my problem.
I hava a 3 year old Toshiba Sattellite A305D with updated BIOS to version 2.10. It came with Windows Vista Home 32bit and I had upgraded it to Windows 7 64-bit last Christmas. It was working fine till last month that I started getting sporadic blank screens. Here is the symptome with details: screen goes blank, backlight it on, but there is no content on screen. At this time the Hard Disk Drive activity light is steady lit. Initially the problem happened intermitently and sometimes it fixed itself after few minutes and screen would come back on, but when it started to happen more often, I started to look for some troubleshooting. Some people suggested that blank screen could be due to bad lid close button being stuck or Windows power management's CPU power being set to 5%. I have tried cleaning the lid button and fixing power management but no luck. Then, I tried re-installing Windows from DVD, screen never went blank till after the first few steps of setup to the point that it says "Extracting Windows Files". At this time I started to think this is a hardware issue. I took out the RAM, I installed it on my MacBook Pro and used it for few days, and I had no problem. I even diagnosed them with Windows Memory Checker in the list of Recovery Options and no problem was detected. So, the next suspecious thing was the video card or display inverter. I tried connecting the laptop to an external monitor to test the screen's inverter, and same thing happened and external monitor went blank. I used Windows Recovery options and left it on that screen over night and nothing happened so I concluded the video card is fine. Next, I had turned off the Wifi and Lan, but nothing seamed to change, so I concluded those are OK as well. My last coclusion was that the hard drive is bad. I took the drive out and coonected it to my Desktop PC and ran disk utiility scan to check for bad sectors and none was detected. So, I thought the drive might be totally broken. I went to local electronics store and bought a brand new HITACHI SATA II drive and installed it. At first same thing happened so I gave up. Since I didn't have the recovery disks, I ordered recovery disks from Toshiba and tried that. Save thing happend and as soon as it started copying files, it blanked out. OK. So this time I ran a different recovery option and formatted the entire hard disk and zeroed out all sectors. That took approximately 3 days to finish for a 500GB brand new hard drive. Seams a long time.After that I could install Windows 7 64-bit from scratch up to the end. However, things got gorry again when I started installing Updates and driver packages. I had read about some problems with ATI drivers and Catalyst software with .NET updates, so I did not install any driver from update site and made sure all .NET updates are installed. I had to install the updates slowly chosing a few at a time. Otherwise same thing would happen. I got stuck to the point that I could not update anything. Windows files seamed to be corrupt and turning on/off Windows Features in controll panel was blank, so I had to re-install again. I did Re-install successfully using the upgrade option. This time I installed .NET updates first before any other updates. Then I started downloading all Toshiba drivers. Aazingly, the laptop worked for few ours without the symptom. I managed to install most of the drivers and updates including Value Added Package, HDD/DVD Rom Patch, Registry Patch, Sound, Modem, Atheros Wireless, and Catalyst. Up till now things were ok. Then I ran Toshiba Hardware update patch, and things got really messed up. Windows never booted again and symptoms showed right after boot tried to load WIndows. I tried recovery options but System restore kept getting errors too and I could not restore any more. Since Windows 7 Install and Windows Vistal recovery to Factory Default from recovery disk did not work, I thought maybe I should try Windows XP. So, I got a hold of my old Windows XP CD-ROM and I took a stab at it. Everything went fine till it started to copy windows files. This time symptom was different. I got one of those XP Blue Screen of deaths saying Hard Drive is bad and I must run chdsk /F. So, I concluded HDD is the problem. Ran CHDSK and no problem. I formated the drive again using DISKPART and the problem still exists. This is a brand new hard drive. What is the problem?

Please include your full model number when posting problems on the forums. It can be found on the bottom of your laptop. "A305D" is only partial.
That's quite the problem. How often was it doing this? At some steps in your diagnosing, it seemed to get better, but I wonder if it was actually (temporarily) fixed, or if it didn't occur by chance.
Unfortunately I don't have an answer for you. Normally I'd suggest you get it serviced, but then you'd also be throwing more money at a three year old notebook when clearly you're knowledgeable yourself.
Hopefully someone in the community will have some suggestions. I have noticed that some people shy away from posts with large paragraphs of text. (I'm not saying that's correct, but it happens.) I'd suggest putting some bullet points at the top summarizing. If you feel like doing that, you can edit your message.
Good luck!
- Peter

Did DW update 8.0.2 change the code?

I would really appreciate a look into this problem. I I have
ordered some Interakt extensions and have noticed the code changed
on me (see lots below). But then I went to another machine with the
8.0.2 update with NO EXTENSIONS ENABLED or the Interakt installed
and I get the same code change. I have posted this to Interakt as
well so I am looking for a reason for this bizzare problem. I have
a client who has already paid up front for a quite involved dynamic
site and I cant get the folders, database and connections strings
to work together like the site before the extensions and upgrade.
Posted to Interakt:
I have been at this for 5 days now and I am at a complete and
total loss and do not have a clue why this is happening. But I can
say that this problem started AFTER I installed the Interakt
products KHTML4, Kollection3, MxCalendar, MX CSS Menus AND/OR
DW8.0.2. - I don't know which came first.
Several months back I created a web site
www.bobbygainesfunktion.com - site works. I was not using the
products or upgrade (pretty sure) upgraded DW, then I bought the
Interakt products 3 weeks ago hoping I could make fabulous websites
but I am not able to do the simplest thing like create a folder and
link to the database ASPVBScript style. I keep getting a reoccuring
error and the code has also changed in how the pages are created
dynamically.
I created the funktion site without the upgrade and the
products - about 90% sure. I was able to create a folder and link
to the database from inside it with no problem.
The code is as follows for the page as well as its
cooresponding connection file:
PAGE
BAND.ASP
%@LANGUAGE="VBSCRIPT"%

<%
Dim tourlist
Dim tourlist_numRows
Set tourlist = Server.CreateObject("ADODB.Recordset")
tourlist.ActiveConnection = MM_connfunktion_STRING
tourlist.Source = "SELECT * FROM Gig WHERE GStamp >=
Date() ORDER BY GStamp ASC"
tourlist.CursorType = 0
tourlist.CursorLocation = 2
tourlist.LockType = 1
tourlist.Open()
tourlist_numRows = 0
%>
<%
Dim Repeat1__numRows
Dim Repeat1__index
Repeat1__numRows = 4
Repeat1__index = 0
tourlist_numRows = tourlist_numRows + Repeat1__numRows
%>
CONNECTION PAGE; connfunktion2.asp:
<%
' FileName="Connection_ado_conn_string.htm"
' Type="ADO"
' DesigntimeType="ADO"
' HTTP="true"
' Catalog=""
' Schema=""
Dim MM_connfunktion_STRING
MM_connfunktion_STRING =
"Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" &
Server.MapPath("data/funkdata.mdb")
%>
Band.asp is located in the root of the directory so the
address to the connection file: Connections/connfunktion2.asp
works.
A FILE IN FOLDER CALLED ADMIN:
GIGLIST.ASP

<%
Dim seeGig
Dim seeGig_numRows
Set seeGig = Server.CreateObject("ADODB.Recordset")
seeGig.ActiveConnection = MM_connfunktion_STRING
seeGig.Source = "SELECT * FROM Gig ORDER BY GStamp ASC"
seeGig.CursorType = 0
seeGig.CursorLocation = 2
seeGig.LockType = 1
seeGig.Open()
seeGig_numRows = 0
%>
<%
Dim Repeat1__numRows
Dim Repeat1__index
Repeat1__numRows = -1
Repeat1__index = 0
seeGig_numRows = seeGig_numRows + Repeat1__numRows
%>
CONNECTION PAGE: Connfunktion.asp
<%
' FileName="Connection_ado_conn_string.htm"
' Type="ADO"
' DesigntimeType="ADO"
' HTTP="true"
' Catalog=""
' Schema=""
Dim MM_connfunktion_STRING
MM_connfunktion_STRING =
"Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" &
Server.MapPath("/data/funkdata.mdb")
%>
Note that the addresses have changed for both the Map.Path
and the include file to accomidate the folder.
THIS SITE WORKS
Now That I have bought the Interakt product AND/OR upgraded
to DW8.0.2 I cannot for the life of me replicate this process.
The following address is live:
http://www.homecomputertutor-sc.com/twoconn/admin/
This uses the exact same method of connection file and
database address change.
Index page in folder named admin:
@LANGUAGE="VBSCRIPT" CODEPAGE="1252"

<%
Dim Recordset1
Dim Recordset1_cmd
Dim Recordset1_numRows
Set Recordset1_cmd = Server.CreateObject ("ADODB.Command")
Recordset1_cmd.ActiveConnection = MM_twoconn_STRING
Recordset1_cmd.CommandText = "SELECT * FROM News"
Recordset1_cmd.Prepared = true
Set Recordset1 = Recordset1_cmd.Execute
Recordset1_numRows = 0
%>
<%
Dim Repeat1__numRows
Dim Repeat1__index
Repeat1__numRows = -1
Repeat1__index = 0
Recordset1_numRows = Recordset1_numRows + Repeat1__numRows
%>
NOTICE A DIFFERENCE! -
{{{Dim Recordset1_cmd
Set Recordset1_cmd = Server.CreateObject ("ADODB.Command")
Recordset1_cmd.ActiveConnection = MM_twoconn_STRING
Recordset1_cmd.CommandText = "SELECT * FROM News"
Recordset1_cmd.Prepared = true}}}
This is the line of code that is failing:
Recordset1_cmd.ActiveConnection = MM_twoconn_STRING
Connection File code:
<%
' FileName="Connection_odbc_conn_dsn.htm"
' Type="ADO"
' DesigntimeType="ADO"
' HTTP="true"
' Catalog=""
' Schema=""
Dim MM_twoconn_STRING
MM_twoconn_STRING = "Provider=Microsoft.Jet.OLEDB.4.0;Data
Source=" & Server.MapPath("/database/twoconn.mdb")
%>
Have I upgraded to DW8.0.2 since the creation of Funktion - I
think. Could this be a Dreamweaver problem and not yours - I don't
know. I would appreciate a good look into this.
Thanks so very much,
Katherine Wakefield
[email protected]

Part of the 8.0.2 update of DW8 was to secure recordsets to
prevent SQL
injection attacks. This has caused some problem with
extensions that work
with or create recordsets and extension developers have been
working to make
their extensions work with the new code.
It was my understanding that Interakt had published updates
of all their
affected extensions for 8.0.2. I found this technote on their
site that
should answer a lot of your questions. If it doesn't, they
have extensive
forums on their site for all of their products.
http://www.interaktonline.com/Support/Knowledgebase/Technote/Details/217/15/Working+with+t he+latest+InterAKT+Extensions+Dreamweaver+8.0.2+compatible.html
Nancy Gill
Adobe Community Expert
BLOG:
http://www.dmxwishes.com/blog.asp
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: DMX 2004: The Complete Reference, DMX 2004:
A Beginner's
Guide, Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"Awakekats" <[email protected]> wrote in
message
news:[email protected]...
>I would really appreciate a look into this problem. I I
have ordered some
> Interakt extensions and have noticed the code changed on
me (see lots
> below).
> But then I went to another machine with the 8.0.2 update
with NO
> EXTENSIONS
> ENABLED or the Interakt installed and I get the same
code change. I have
> posted
> this to Interakt as well so I am looking for a reason
for this bizzare
> problem.
> I have a client who has already paid up front for a
quite involved dynamic
> site
> and I cant get the folders, database and connections
strings to work
> together
> like the site before the extensions and upgrade.
>
> Posted to Interakt:
>
> I have been at this for 5 days now and I am at a
complete and total loss
> and
> do not have a clue why this is happening. But I can say
that this problem
> started AFTER I installed the Interakt products KHTML4,
Kollection3,
> MxCalendar, MX CSS Menus AND/OR DW8.0.2. - I don't know
which came first.
>
> Several months back I created a web site
www.bobbygainesfunktion.com -
> site
> works. I was not using the products or upgrade (pretty
sure) upgraded DW,
> then
> I bought the Interakt products 3 weeks ago hoping I
could make fabulous
> websites but I am not able to do the simplest thing like
create a folder
> and
> link to the database ASPVBScript style. I keep getting a
reoccuring error
> and
> the code has also changed in how the pages are created
dynamically.
>
> I created the funktion site without the upgrade and the
products - about
> 90%
> sure. I was able to create a folder and link to the
database from inside
> it
> with no problem.
> The code is as follows for the page as well as its
cooresponding
> connection
> file:
> PAGE
> BAND.ASP
> ##########
> %@LANGUAGE="VBSCRIPT"%
>
> 
> <%
> Dim tourlist
> Dim tourlist_numRows
>
> Set tourlist = Server.CreateObject("ADODB.Recordset")
> tourlist.ActiveConnection = MM_connfunktion_STRING
> tourlist.Source = "SELECT * FROM Gig WHERE GStamp >=
Date() ORDER BY
> GStamp
> ASC"
> tourlist.CursorType = 0
> tourlist.CursorLocation = 2
> tourlist.LockType = 1
> tourlist.Open()
>
> tourlist_numRows = 0
> %>
> <%
> Dim Repeat1__numRows
> Dim Repeat1__index
>
> Repeat1__numRows = 4
> Repeat1__index = 0
> tourlist_numRows = tourlist_numRows + Repeat1__numRows
> %>
> #####
> CONNECTION PAGE; connfunktion2.asp:
> <%
> ' FileName="Connection_ado_conn_string.htm"
> ' Type="ADO"
> ' DesigntimeType="ADO"
> ' HTTP="true"
> ' Catalog=""
> ' Schema=""
> Dim MM_connfunktion_STRING
> MM_connfunktion_STRING =
"Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" &
> Server.MapPath("data/funkdata.mdb")
> %>
>
> Band.asp is located in the root of the directory so the
address to the
> connection file: Connections/connfunktion2.asp works.
>
> A FILE IN FOLDER CALLED ADMIN:
> GIGLIST.ASP
> #####
> 
> <%
> Dim seeGig
> Dim seeGig_numRows
>
> Set seeGig = Server.CreateObject("ADODB.Recordset")
> seeGig.ActiveConnection = MM_connfunktion_STRING
> seeGig.Source = "SELECT * FROM Gig ORDER BY GStamp ASC"
> seeGig.CursorType = 0
> seeGig.CursorLocation = 2
> seeGig.LockType = 1
> seeGig.Open()
>
> seeGig_numRows = 0
> %>
> <%
> Dim Repeat1__numRows
> Dim Repeat1__index
>
> Repeat1__numRows = -1
> Repeat1__index = 0
> seeGig_numRows = seeGig_numRows + Repeat1__numRows
> %>
> ####
> CONNECTION PAGE: Connfunktion.asp
> <%
> ' FileName="Connection_ado_conn_string.htm"
> ' Type="ADO"
> ' DesigntimeType="ADO"
> ' HTTP="true"
> ' Catalog=""
> ' Schema=""
> Dim MM_connfunktion_STRING
> MM_connfunktion_STRING =
"Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" &
> Server.MapPath("/data/funkdata.mdb")
> %>
>
> Note that the addresses have changed for both the
Map.Path and the include
> file to accomidate the folder.
>
> THIS SITE WORKS
>
> Now That I have bought the Interakt product AND/OR
upgraded to DW8.0.2 I
> cannot for the life of me replicate this process.
>
> The following address is live:
>
http://www.homecomputertutor-sc.com/twoconn/admin/
>
> This uses the exact same method of connection file and
database address
> change.
>
> Index page in folder named admin:
> @LANGUAGE="VBSCRIPT" CODEPAGE="1252"
> 
> <%
> Dim Recordset1
> Dim Recordset1_cmd
> Dim Recordset1_numRows
>
> Set Recordset1_cmd = Server.CreateObject
("ADODB.Command")
> Recordset1_cmd.ActiveConnection = MM_twoconn_STRING
> Recordset1_cmd.CommandText = "SELECT * FROM News"
> Recordset1_cmd.Prepared = true
>
> Set Recordset1 = Recordset1_cmd.Execute
> Recordset1_numRows = 0
> %>
> <%
> Dim Repeat1__numRows
> Dim Repeat1__index
>
> Repeat1__numRows = -1
> Repeat1__index = 0
> Recordset1_numRows = Recordset1_numRows +
Repeat1__numRows
> %>
> NOTICE A DIFFERENCE! -
>
> {{{Dim Recordset1_cmd
> Set Recordset1_cmd = Server.CreateObject
("ADODB.Command")
> Recordset1_cmd.ActiveConnection = MM_twoconn_STRING
> Recordset1_cmd.CommandText = "SELECT * FROM News"
> Recordset1_cmd.Prepared = true}}}
>
> This is the line of code that is failing:
> Recordset1_cmd.ActiveConnection = MM_twoconn_STRING
>
> ####
> Connection File code:
>
> <%
> ' FileName="Connection_odbc_conn_dsn.htm"
> ' Type="ADO"
> ' DesigntimeType="ADO"
> ' HTTP="true"
> ' Catalog=""
> ' Schema=""
> Dim MM_twoconn_STRING
> MM_twoconn_STRING =
"Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" &
> Server.MapPath("/database/twoconn.mdb")
> %>
>
> Have I upgraded to DW8.0.2 since the creation of
Funktion - I think. Could
> this be a Dreamweaver problem and not yours - I don't
know. I would
> appreciate
> a good look into this.
>
> Thanks so very much,
> Katherine Wakefield
> [email protected]
>
>
>

Ssh X11 forwarding takes too long to start any app. remotely

Hi,
I have a bizzare problem with %subject% for some time already.
Affected are all my Arch linux installations (all with: systemd, openbox (without Display Manager), and latest updates):
1. home desktop (core 2 duo, 2.4GHz, 3GB RAM).
2. one testing desktop in virtualbox on the desktop from prev. point.
3. work laptop (Intel Core i5, 4GB RAM).
All of these are connected via cable to the same home network 100MB router (using openwrt on asus wl-500g).
Normal ssh transmissions, like entering commands, or transfer of data via scp (even large amount of data for testing purposes because of this) works quick like expected.
The problem is, that if I try to start app. remotely via ssh X forwarding from and to any of these (affected also bidirectional), it takes always aprox. 2 minutes to start the app.
Afterwards, it works fast and fine.
Doesn't change anything, whether the X server is running on the server's side or not.
Have been testing it with some lightweight apps too, but makes no difference if it's e.g. mousepad, gedit, thunderbird, always the same 2 min. delay at their start.
Also, some time ago, I had an older (more than 10 years) laptop, also with Arch installed, using LXDE, and connected via wifi to this same router, which worked perfectly without any delay. Also the same time ago, I was yet running Ubuntu on the home desktop, when I installed Arch to the virtualbox mentioned in point 2, and the problem was already present on the virtual pc, but not on the Ubuntu or the older laptop with Arch I had before.
Later, when I switched home desktop to Arch (or I got new laptop in the work), the issue appeared instantly on the new Arch installations.
The sshd configuration is the basic from the package, with X forwarding enabled of course, thus no strange changes of mine.
I monitored the ssh communications with tcpdump, not to read the encrypted data itself , but to see whether the data is flowing, and there are flow outages (absolute quiet except of below mentioned exceptions) in the mentioned 2 minutes duration till app. startup:
- after ssh authentication, there is about 1 minute silence, when after this 1st minute some few data is flowing
- next, there is another 1 minute silence, after which the app. finally starts
I've also gathered ssh debugging informations, from both, server (where I'm connecting and trying to start app. remotely) and client, with description when waiting has been detected.
server:
/usr/sbin/sshd -ddd
debug2: load_server_config: filename /etc/ssh/sshd_config
debug2: load_server_config: done config len = 501
debug2: parse_server_config: config /etc/ssh/sshd_config len 501
debug3: /etc/ssh/sshd_config:15 setting ListenAddress 0.0.0.0
debug3: /etc/ssh/sshd_config:16 setting ListenAddress ::
debug3: /etc/ssh/sshd_config:35 setting LogLevel INFO
debug3: /etc/ssh/sshd_config:42 setting PermitRootLogin no
debug3: /etc/ssh/sshd_config:52 setting AuthorizedKeysFile .ssh/authorized_keys
debug3: /etc/ssh/sshd_config:68 setting PermitEmptyPasswords no
debug3: /etc/ssh/sshd_config:71 setting ChallengeResponseAuthentication no
debug3: /etc/ssh/sshd_config:92 setting UsePAM yes
debug3: /etc/ssh/sshd_config:94 setting AllowAgentForwarding yes
debug3: /etc/ssh/sshd_config:95 setting AllowTcpForwarding yes
debug3: /etc/ssh/sshd_config:97 setting X11Forwarding yes
debug3: /etc/ssh/sshd_config:98 setting X11DisplayOffset 10
debug3: /etc/ssh/sshd_config:99 setting X11UseLocalhost yes
debug3: /etc/ssh/sshd_config:104 setting UsePrivilegeSeparation sandbox
debug3: /etc/ssh/sshd_config:106 setting Compression delayed
debug3: /etc/ssh/sshd_config:109 setting UseDNS no
debug3: /etc/ssh/sshd_config:120 setting Subsystem sftp /usr/lib/ssh/sftp-server
debug1: sshd version OpenSSH_6.1p1
debug3: Incorrect RSA1 identifier
debug1: read PEM private key done: type RSA
debug1: private host key: #0 type 1 RSA
debug3: Incorrect RSA1 identifier
debug1: read PEM private key done: type DSA
debug1: private host key: #1 type 2 DSA
debug3: Incorrect RSA1 identifier
debug1: read PEM private key done: type ECDSA
debug1: private host key: #2 type 3 ECDSA
debug1: rexec_argv[0]='/usr/sbin/sshd'
debug1: rexec_argv[1]='-ddd'
debug3: oom_adjust_setup
Set /proc/self/oom_score_adj from 0 to -1000
debug2: fd 3 setting O_NONBLOCK
debug3: sock_set_v6only: set socket 3 IPV6_V6ONLY
debug1: Bind to port 22 on ::.
Server listening on :: port 22.
debug2: fd 4 setting O_NONBLOCK
debug1: Bind to port 22 on 0.0.0.0.
Server listening on 0.0.0.0 port 22.
debug3: fd 5 is not O_NONBLOCK
debug1: Server will not fork when running in debugging mode.
debug3: send_rexec_state: entering fd = 8 config len 501
debug3: ssh_msg_send: type 0
debug3: send_rexec_state: done
debug1: rexec start in 5 out 5 newsock 5 pipe -1 sock 8
debug1: inetd sockets after dupping: 3, 3
Connection from CLIENT_IP port 43333
debug1: Client protocol version 2.0; client software version OpenSSH_6.1
debug1: match: OpenSSH_6.1 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.1
debug2: fd 3 setting O_NONBLOCK
debug3: ssh_sandbox_init: preparing seccomp filter sandbox
debug2: Network child is on pid 6379
debug3: preauth child monitor started
debug3: privsep user:group 99:99 [preauth]
debug1: permanently_set_uid: 99/99 [preauth]
debug3: ssh_sandbox_child: setting PR_SET_NO_NEW_PRIVS [preauth]
debug3: ssh_sandbox_child: attaching seccomp filter program [preauth]
debug1: list_hostkey_types: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 [preauth]
debug1: SSH2_MSG_KEXINIT sent [preauth]
debug1: SSH2_MSG_KEXINIT received [preauth]
debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 [preauth]
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 [preauth]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] [preauth]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] [preauth]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 [preauth]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 [preauth]
debug2: kex_parse_kexinit: none,[email protected] [preauth]
debug2: kex_parse_kexinit: none,[email protected] [preauth]
debug2: kex_parse_kexinit: [preauth]
debug2: kex_parse_kexinit: [preauth]
debug2: kex_parse_kexinit: first_kex_follows 0 [preauth]
debug2: kex_parse_kexinit: reserved 0 [preauth]
debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 [preauth]
debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,[email protected],[email protected],[email protected],[email protected],ssh-rsa,ssh-dss [preauth]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] [preauth]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] [preauth]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 [preauth]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 [preauth]
debug2: kex_parse_kexinit: none,[email protected],zlib [preauth]
debug2: kex_parse_kexinit: none,[email protected],zlib [preauth]
debug2: kex_parse_kexinit: [preauth]
debug2: kex_parse_kexinit: [preauth]
debug2: kex_parse_kexinit: first_kex_follows 0 [preauth]
debug2: kex_parse_kexinit: reserved 0 [preauth]
debug2: mac_setup: found hmac-md5 [preauth]
debug1: kex: client->server aes128-ctr hmac-md5 none [preauth]
debug2: mac_setup: found hmac-md5 [preauth]
debug1: kex: server->client aes128-ctr hmac-md5 none [preauth]
debug1: expecting SSH2_MSG_KEX_ECDH_INIT [preauth]
debug3: mm_key_sign entering [preauth]
debug3: mm_request_send entering: type 4 [preauth]
debug3: mm_key_sign: waiting for MONITOR_ANS_SIGN [preauth]
debug3: mm_request_receive_expect entering: type 5 [preauth]
debug3: mm_request_receive entering [preauth]
debug3: mm_request_receive entering
debug3: monitor_read: checking request 4
debug3: mm_answer_sign
debug3: mm_answer_sign: signature 0x13e3f80(100)
debug3: mm_request_send entering: type 5
debug2: monitor_read: 4 used once, disabling now
debug2: kex_derive_keys [preauth]
debug2: set_newkeys: mode 1 [preauth]
debug1: SSH2_MSG_NEWKEYS sent [preauth]
debug1: expecting SSH2_MSG_NEWKEYS [preauth]
debug2: set_newkeys: mode 0 [preauth]
debug1: SSH2_MSG_NEWKEYS received [preauth]
debug1: KEX done [preauth]
debug1: userauth-request for user USERNAME service ssh-connection method none [preauth]
debug1: attempt 0 failures 0 [preauth]
debug3: mm_getpwnamallow entering [preauth]
debug3: mm_request_send entering: type 6 [preauth]
debug3: mm_request_receive entering
debug3: monitor_read: checking request 6
debug3: mm_answer_pwnamallow
debug2: parse_server_config: config reprocess config len 501
debug3: mm_answer_pwnamallow: sending MONITOR_ANS_PWNAM: 1
debug3: mm_request_send entering: type 7
debug2: monitor_read: 6 used once, disabling now
debug3: mm_getpwnamallow: waiting for MONITOR_ANS_PWNAM [preauth]
debug3: mm_request_receive_expect entering: type 7 [preauth]
debug3: mm_request_receive entering [preauth]
debug2: input_userauth_request: setting up authctxt for USERNAME [preauth]
debug3: mm_start_pam entering [preauth]
debug3: mm_request_send entering: type 45 [preauth]
debug3: mm_request_receive entering
debug3: monitor_read: checking request 45
debug1: PAM: initializing for "USERNAME"
debug1: PAM: setting PAM_RHOST to "CLIENT_IP"
debug1: PAM: setting PAM_TTY to "ssh"
debug2: monitor_read: 45 used once, disabling now
debug3: mm_inform_authserv entering [preauth]
debug3: mm_request_send entering: type 3 [preauth]
debug2: input_userauth_request: try method none [preauth]
debug3: mm_request_receive entering
debug3: monitor_read: checking request 3
debug3: mm_answer_authserv: service=ssh-connection, style=
debug2: monitor_read: 3 used once, disabling now
debug1: userauth-request for user USERNAME service ssh-connection method publickey [preauth]
debug1: attempt 1 failures 0 [preauth]
debug2: input_userauth_request: try method publickey [preauth]
debug1: test whether pkalg/pkblob are acceptable [preauth]
debug3: mm_key_allowed entering [preauth]
debug3: mm_request_send entering: type 20 [preauth]
debug3: mm_key_allowed: waiting for MONITOR_ANS_KEYALLOWED [preauth]
debug3: mm_request_receive_expect entering: type 21 [preauth]
debug3: mm_request_receive entering [preauth]
debug3: mm_request_receive entering
debug3: monitor_read: checking request 20
debug3: mm_answer_keyallowed entering
debug3: mm_answer_keyallowed: key_from_blob: 0x13e1e20
debug1: temporarily_use_uid: 1000/100 (e=0/0)
debug1: trying public key file /home/USERNAME/.ssh/authorized_keys
debug1: Could not open authorized keys '/home/USERNAME/.ssh/authorized_keys': No such file or directory
debug1: restore_uid: 0/0
Failed publickey for USERNAME from CLIENT_IP port 43333 ssh2
debug3: mm_answer_keyallowed: key 0x13e1e20 is not allowed
debug3: mm_request_send entering: type 21
debug2: userauth_pubkey: authenticated 0 pkalg ssh-dss [preauth]
debug1: userauth-request for user USERNAME service ssh-connection method password [preauth]
debug1: attempt 2 failures 1 [preauth]
debug2: input_userauth_request: try method password [preauth]
debug3: mm_auth_password entering [preauth]
debug3: mm_request_send entering: type 10 [preauth]
debug3: mm_auth_password: waiting for MONITOR_ANS_AUTHPASSWORD [preauth]
debug3: mm_request_receive_expect entering: type 11 [preauth]
debug3: mm_request_receive entering [preauth]
debug3: mm_request_receive entering
debug3: monitor_read: checking request 10
debug3: PAM: sshpam_passwd_conv called with 1 messages
debug1: PAM: password authentication accepted for USERNAME
debug3: mm_answer_authpassword: sending result 1
debug3: mm_request_send entering: type 11
debug3: mm_request_receive_expect entering: type 46
debug3: mm_request_receive entering
debug1: do_pam_account: called
debug3: PAM: do_pam_account pam_acct_mgmt = 0 (Success)
debug3: mm_request_send entering: type 47
Accepted password for USERNAME from CLIENT_IP port 43333 ssh2
debug3: mm_auth_password: user authenticated [preauth]
debug3: mm_do_pam_account entering [preauth]
debug3: mm_request_send entering: type 46 [preauth]
debug3: mm_request_receive_expect entering: type 47 [preauth]
debug3: mm_request_receive entering [preauth]
debug3: mm_do_pam_account returning 1 [preauth]
debug3: mm_send_keystate: Sending new keys: 0x13e1c40 0x13e34c0 [preauth]
debug3: mm_newkeys_to_blob: converting 0x13e1c40 [preauth]
debug3: mm_newkeys_to_blob: converting 0x13e34c0 [preauth]
debug3: mm_send_keystate: New keys have been sent [preauth]
debug3: mm_send_keystate: Sending compression state [preauth]
debug3: mm_request_send entering: type 24 [preauth]
debug3: mm_send_keystate: Finished sending state [preauth]
debug1: monitor_read_log: child log fd closed
debug1: monitor_child_preauth: USERNAME has been authenticated by privileged process
debug3: mm_get_keystate: Waiting for new keys
debug3: mm_request_receive_expect entering: type 24
debug3: mm_request_receive entering
debug3: mm_newkeys_from_blob: 0x13f3b20(122)
debug2: mac_setup: found hmac-md5
debug3: mm_get_keystate: Waiting for second key
debug3: mm_newkeys_from_blob: 0x13f3b20(122)
debug2: mac_setup: found hmac-md5
debug3: mm_get_keystate: Getting compression state
debug3: mm_get_keystate: Getting Network I/O buffers
debug3: mm_share_sync: Share sync
debug3: mm_share_sync: Share sync end
debug3: ssh_sandbox_parent_finish: finished
debug1: PAM: establishing credentials
debug3: PAM: opening session
User child is on pid 6387
debug1: PAM: establishing credentials
debug1: permanently_set_uid: 1000/100
debug2: set_newkeys: mode 0
debug2: set_newkeys: mode 1
debug1: Entering interactive session for SSH2.
debug2: fd 7 setting O_NONBLOCK
debug2: fd 9 setting O_NONBLOCK
debug1: server_init_dispatch_20
debug1: server_input_channel_open: ctype session rchan 0 win 2097152 max 32768
debug1: input_session_request
debug1: channel 0: new [server-session]
debug2: session_new: allocate (allocated 0 max 10)
debug3: session_unused: session id 0 unused
debug1: session_new: session 0
debug1: session_open: channel 0
debug1: session_open: session 0: link with channel 0
debug1: server_input_channel_open: confirm session
debug1: server_input_global_request: rtype [email protected] want_reply 0
debug1: server_input_channel_req: channel 0 request x11-req reply 1
debug1: session_by_channel: session 0 channel 0
debug1: session_input_channel_req: session 0 req x11-req
debug3: sock_set_v6only: set socket 10 IPV6_V6ONLY
debug2: fd 10 setting O_NONBLOCK
debug3: fd 10 is O_NONBLOCK
debug1: channel 1: new [X11 inet listener]
debug2: fd 11 setting O_NONBLOCK
debug3: fd 11 is O_NONBLOCK
debug1: channel 2: new [X11 inet listener]
debug1: server_input_channel_req: channel 0 request exec reply 1
debug1: session_by_channel: session 0 channel 0
debug1: session_input_channel_req: session 0 req exec
debug2: fd 3 setting TCP_NODELAY
debug3: packet_set_tos: set IP_TOS 0x10
debug2: fd 14 setting O_NONBLOCK
debug2: fd 13 setting O_NONBLOCK
debug2: fd 16 setting O_NONBLOCK
debug2: channel 0: read 210 from efd 16
debug2: channel 0: rwin 2097152 elen 210 euse 1
debug2: channel 0: sent ext data 210
debug2: channel 0: read 380 from efd 16
debug2: channel 0: rwin 2096942 elen 380 euse 1
debug2: channel 0: sent ext data 380
debug2: channel 0: read 121 from efd 16
debug2: channel 0: rwin 2096562 elen 121 euse 1
debug2: channel 0: sent ext data 121
### Here started the waiting on the server's side, and continued later till the start of app.:
debug1: X11 connection requested.
debug2: fd 12 setting TCP_NODELAY
debug2: fd 12 setting O_NONBLOCK
debug3: fd 12 is O_NONBLOCK
debug1: channel 3: new [X11 connection from 127.0.0.1 port 46968]
debug2: channel 3: open confirm rwindow 2097152 rmax 16384
debug2: channel 0: read 62 from efd 16
debug2: channel 0: rwin 2096441 elen 62 euse 1
debug2: channel 0: sent ext data 62
debug1: X11 connection requested.
debug2: fd 15 setting TCP_NODELAY
debug2: fd 15 setting O_NONBLOCK
debug3: fd 15 is O_NONBLOCK
debug1: channel 4: new [X11 connection from 127.0.0.1 port 46972]
debug2: channel 4: open confirm rwindow 2097152 rmax 16384
debug2: channel 3: rcvd adjust 51268
debug2: channel 3: rcvd adjust 65536
debug2: channel 3: rcvd adjust 65536
debug2: channel 3: rcvd adjust 65536
debug2: channel 3: rcvd adjust 65536
debug2: channel 3: rcvd adjust 32768
debug2: channel 3: rcvd adjust 147456
debug2: channel 3: rcvd adjust 55788
debug2: channel 3: window 32740 sent adjust 32796
client:
ssh -Xvvv USERNAME@SERVER_IP mousepad
OpenSSH_6.1p1, OpenSSL 1.0.1c 10 May 2012
debug1: Reading configuration data /etc/ssh/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to SERVER_IP [SERVER_IP] port 22.
debug1: Connection established.
debug1: identity file /home/USERNAME/.ssh/id_rsa type -1
debug1: identity file /home/USERNAME/.ssh/id_rsa-cert type -1
debug1: identity file /home/USERNAME/.ssh/id_dsa type 2
debug1: identity file /home/USERNAME/.ssh/id_dsa-cert type -1
debug1: identity file /home/USERNAME/.ssh/id_ecdsa type -1
debug1: identity file /home/USERNAME/.ssh/id_ecdsa-cert type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_6.1
debug1: match: OpenSSH_6.1 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.1
debug2: fd 3 setting O_NONBLOCK
debug3: load_hostkeys: loading entries for host "SERVER_IP" from file "/home/USERNAME/.ssh/known_hosts"
debug3: load_hostkeys: found key type ECDSA in file /home/USERNAME/.ssh/known_hosts:4
debug3: load_hostkeys: loaded 1 keys
debug3: order_hostkeyalgs: prefer hostkeyalgs: [email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,[email protected],[email protected],[email protected],[email protected],ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,[email protected],zlib
debug2: kex_parse_kexinit: none,[email protected],zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,[email protected]
debug2: kex_parse_kexinit: none,[email protected]
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_setup: found hmac-md5
debug1: kex: server->client aes128-ctr hmac-md5 none
debug2: mac_setup: found hmac-md5
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: sending SSH2_MSG_KEX_ECDH_INIT
debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
debug1: Server host key: ECDSA ABC123...
debug3: load_hostkeys: loading entries for host "SERVER_IP" from file "/home/USERNAME/.ssh/known_hosts"
debug3: load_hostkeys: found key type ECDSA in file /home/USERNAME/.ssh/known_hosts:4
debug3: load_hostkeys: loaded 1 keys
debug1: Host 'SERVER_IP' is known and matches the ECDSA host key.
debug1: Found key in /home/USERNAME/.ssh/known_hosts:4
debug1: ssh_ecdsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: Roaming not allowed by server
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /home/USERNAME/.ssh/id_rsa ((nil))
debug2: key: /home/USERNAME/.ssh/id_dsa (0x)
debug2: key: /home/USERNAME/.ssh/id_ecdsa ((nil))
debug1: Authentications that can continue: publickey,password
debug3: start over, passed a different list publickey,password
debug3: preferred publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /home/USERNAME/.ssh/id_rsa
debug3: no such identity: /home/USERNAME/.ssh/id_rsa
debug1: Offering DSA public key: /home/USERNAME/.ssh/id_dsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue: publickey,password
debug1: Trying private key: /home/USERNAME/.ssh/id_ecdsa
debug3: no such identity: /home/USERNAME/.ssh/id_ecdsa
debug2: we did not send a packet, disable method
debug3: authmethod_lookup password
debug3: remaining preferred: ,password
debug3: authmethod_is_enabled password
debug1: Next authentication method: password
USERNAME@SERVER_IP's password:
debug3: packet_send2: adding 48 (len 68 padlen 12 extra_pad 64)
debug2: we sent a password packet, wait for reply
debug1: Authentication succeeded (password).
Authenticated to SERVER_IP ([SERVER_IP]:22).
debug1: channel 0: new [client-session]
debug3: ssh_session2_open: channel_new: 0
debug2: channel 0: send open
debug1: Requesting [email protected]
debug1: Entering interactive session.
debug2: callback start
debug2: x11_get_proto: /usr/bin/xauth -f /tmp/ssh-mHE6faU7YJF2/xauthfile generate :0 MIT-MAGIC-COOKIE-1 untrusted timeout 1200 2>/dev/null
debug2: x11_get_proto: /usr/bin/xauth -f /tmp/ssh-mHE6faU7YJF2/xauthfile list :0 2>/dev/null
debug1: Requesting X11 forwarding with authentication spoofing.
debug2: channel 0: request x11-req confirm 1
debug2: fd 3 setting TCP_NODELAY
debug3: packet_set_tos: set IP_TOS 0x10
debug2: client_session2_setup: id 0
debug1: Sending command: mousepad
debug2: channel 0: request exec confirm 1
debug2: callback done
debug2: channel 0: open confirm rwindow 0 rmax 32768
debug2: channel_input_status_confirm: type 99 id 0
debug2: X11 forwarding request accepted on channel 0
debug2: channel 0: rcvd adjust 2097152
debug2: channel_input_status_confirm: type 99 id 0
debug2: exec request accepted on channel 0
### After successful authentication, here above started the first waiting, where after first 1 min. continued with:
debug2: channel 0: rcvd ext data 210
debug2: channel 0: rcvd ext data 380
debug2: channel 0: rcvd ext data 121
debug3: Copy environment: XDG_SESSION_COOKIE=0d937ee20c7e42bdbf828421a30eaa2f-1357144247.348263-1841400888
debug3: Copy environment: XDG_SESSION_ID=5
debug3: Copy environment: XDG_RUNTIME_DIR=/run/user/1000
debug2: channel 0: written 711 to efd 6
### After another 1 min. continued with + started the app.
debug1: client_input_channel_open: ctype x11 rchan 3 win 65536 max 16384
debug1: client_request_x11: request from 127.0.0.1 46968
debug2: fd 7 setting O_NONBLOCK
debug3: fd 7 is O_NONBLOCK
debug1: channel 1: new [x11]
debug1: confirm x11
debug2: channel 0: rcvd ext data 62
Xlib: extension "RANDR" missing on display "localhost:10.0".
debug2: channel 0: written 62 to efd 6
debug1: client_input_channel_open: ctype x11 rchan 4 win 65536 max 16384
debug1: client_request_x11: request from 127.0.0.1 46972
debug2: fd 8 setting O_NONBLOCK
debug3: fd 8 is O_NONBLOCK
debug1: channel 2: new [x11]
debug1: confirm x11
debug2: channel 1: window 2045884 sent adjust 51268
debug2: channel 1: window 2031616 sent adjust 65536
debug2: channel 1: window 2031616 sent adjust 65536
debug2: channel 1: window 2031616 sent adjust 65536
debug2: channel 1: window 2031616 sent adjust 65536
debug2: channel 1: window 2031616 sent adjust 32768
debug2: channel 1: window 1949696 sent adjust 147456
debug2: channel 1: window 2041364 sent adjust 55788
debug2: channel 1: rcvd adjust 32796
debug1: client_input_channel_open: ctype x11 rchan 5 win 65536 max 16384
debug1: client_request_x11: request from 127.0.0.1 46974
debug2: fd 9 setting O_NONBLOCK
debug3: fd 9 is O_NONBLOCK
debug1: channel 3: new [x11]
debug1: confirm x11
debug2: channel 1: rcvd adjust 32800
It's quite strange, as I have no more ideas what to check next.
Any ideas pls?
thx in advance.

Have finally found a solution for this problem: http://serverfault.com/questions/490352 … w-to-start
Now the applications do start immediately via SSH X11 forwarding as expected.
The following three lines helped:
ip6tables -A INPUT -i lo -j ACCEPT
ip6tables -A OUTPUT -o lo -j ACCEPT
ip6tables -A FORWARD -i lo -o lo -j ACCEPT
While until now, all ip6 traffic has been forbidden (to drop all ip6 traffic) at the start of the system of course.
Nevertheless, I don't understand it, why the ip6 localhost has to be granted this way even if the /etc/ssh/sshd_config is configured for ip4 only "AddressFamily inet"?
I thought, that this way the sshd will be using ip4 protocol only (including for the X11 forwarding), then why does it still need the ip6?

InDesign CS5 PDF - Failure to Export Vector Elements

Recently, we have had two separate incidents where the creation of an InDesign CS5 PDF failed to export certain vector art elements. The elements are not shared between jobs and the files were physically created in different locations (entirely different servers) within our organization. The elements are pdf and eps and appropriately linked. On the PDF, we're not even getting a low-res version of the artwork. When looking at the PDF in NEO, the containing box of the graphic is not present. One the most frustrating aspects of this is we haven't been able to repeat error in order to fix the error. The next time (or 50 times) the document is exported, the vector art is fine.
Has anyone else had a similar issue?

@rickphot
I've had this same problem just today. I have a 64 page INDD that when exported to PDF (print) from CS5 (with no elements on my page set to "non printing elements"), only some of my vector shapes get exported. They are all merely 0.25pt Black Lines used to direct a reader from a comment to a matching illustration, and some pages exported them just fine, and some other pages will not work. I've tried moving them to a new layer, cutting and pasting in place, copying and pasting in place, changing the transparency modes, etc...nothing works...EXCEPT to just redraw the lines.
@Bob Levine
Do you work for Adobe? Can you offer any advice to this problem yet?
Thanks all. Glad I'm not the ONLY one going crazy with a bizzare problem like this one.

Event handler of inbound plug not called when plug fired by event handler

Hello All,
I have a rather bizzare problem, hopefully someone out there can figure out what is going on, as I'm rather stumped.
I have 2 views, A and B. They are linked by plugs, InA, InB, OutToA, OutToB. OutToB is linked to InB from A to B, OutToA is linked to InA from B to A.
There is an onActionLink in view A. Clicking on this triggers an action which calls the wdFirePlugOutToB method.
In view B some handling is done in the method onPlugInB, then wdFirePlugOutToA is called to change the displayed view back to A.
As far as the user is concerned they don't ever see view B. (this bit works perfectly!)
Now also in view A I have an event handler which handles a event from the component controller. It also calls wdFirePlugOutToB.
If I trigger an event in the component controller this event handler is called and the method called. However, when I put a breakpoint in the onPlugInB, flow never reaches here. Flow does get to the wdDoModifyView of view B but never to the inbound plug event handler.
Any suggestions as to what I might need to do? I would have thought calling the wdFirePlugOutToB method would ALWAYS trigger the linked event handler onPlugInB.
I am running NW04 SP18.
Thanks!

Hi Bharathwaj,
The project I'm working on has a requirement to allow for a road-mapped process (FPM) which has one step in which multiple screens can be accessed. I'll give an example: A user in step A selects the cost centre that they want to work with, in step B they need to maintain several pages of information about this cost centre. The do not want to break this information into steps, as there is no logical progression from one step to the next, and it may well be that the user wishes to go from maintaining screen 1 to screen 3, and then screen 2, and then screen 4. Stepping between all screens (1->2->3->2->3->4) wastes time and is not very user friendly. Step C of the process confirms the data that the user entered in step B, and Step D is the validation that the changes have been committed to the database. (a very familar 4 step process for those using ESS).
To allow for this requirement, I have designed a left navigation pane type screen. links appear on the left of the screen and the user can use these to navigate between different screens (implemented as FPM IVAC VCs) on the right of the screen.
It is quite an elegant solution (even if I do say so myself although quite complex to implement. I have relied very heavily on reading the code SAP put together for the FPM. The most complex part is that in order to update the the content of view containers in an application you must trigger a web dynpro view navigation by firing a plug to a different view.
Unfortunately I don't have any sample application code, only the finished product, which I can't really share. But I can say that if you look at the FPM code carefully, working from where the wdInit of the FPM is called, it will eventually make sense.
One thing I found slightly frustrating, you can't use the FPM's component usage register (FPM method attachComponentUsage(IWDComponent, IWDComponentUsage)) to add a VC... darned inconvienient really (you'd think that the web dynpro framework could have implemented the concept of extending an interface, but the IBLC and IVAC interfaces are different! - even though the IVAC is just IBLC + a few methods), but then again you can manage the instantiation of the used VC yourself and call the onInit method of the VC passing the current fpm reference, to attach it to a common FC, and given that you should be sharing context through the FC and never the VC, then really this isn't too much of an issue. (I spent ages worrying that I couldn't add the instances of the VC that I was using within my navigation pane VC to the fpm instance list, until I realised that it really didn't matter!)
One day - when I have time (yeah right!) I might put together a blog about this sort of stuff, in the meantime, it keeps me plenty busy enough not to have the time!
Hope this helped in some small way,
Cheers,
Chris

Mp3 does not play in iTunes but plays in Windows Media Player

Dear group,
iTunes will not play a particular group of mp3s I have but the same mp3s play fine in Windows Media Player.
Winamp cannot play them either.
I've searched the net a bit and found many mentions of it but no solutions which work for me.
Also, these same mp3s are on my iPod and they play fine.
Any clues what is causing this bizzare problem? The files are not wma do not have DRM or anything like that.
I have tried reinstalling iTunes and Winamp.
Thanks

Do the tracks import into iTunes even though the will not play? If so try selecting a track, then go to Advanced>>Convert ID3 tags and select None.
If that allows the track to play you can select multiple tracks to convert.

Media manager mess

Am encountering an issue with "media manager" in FCP.
I wanted to create one master file for my latest project with all relevant clips and resources, so i made a "copy" of the project in media manager and then chose to "delete" (though not permanently) any material not used in the project.
Everything seemed to be fine but I wound up with a bizzare problem on the audio timeline line - audio seemed to cut and then repeat itself - as if a duplicate tack had been produced and then laid in 1 minute into the film.
Anyone know of this issue? Am trying the process again.
Thanks
Andy

The ProRes capture would be cleaner than DVCPROHD would be.
I'm not surprised deleting unused media was where the problem lied... truncating GOP structures is no mean feat I'll wager, and likely not a huge priority for the FCP team. After all, tape is disappearing and will be gone from the scene in fairly short order most likely... AVCHD makes more sense.. that way you'd have smaller files to begin with (not whole tape captures for example), and managing it would be a lot easier. But I'm digressing....
Even capturing to DVCPROHD will result in a lot larger files though smaller than the ProRes captures. I'd suggest maybe if you source HDV as HDV and just live with the MM problems, render to prores in your sequences (it's 40% faster than native HDV rendering), you'll not be as worried about the storage space not saved through media management because the files are so much smaller in the first place...? Dunno.. need to know more about your workflow in general to make a suggestion that really is based in something meaningful to your particular needs. But figure I should through out what I'm thinking.
Jerry

RS480M2-IL: Drives do not power up if PATA cables are connected

I am building a system around a the RS480M2-IL and I'm having a bizzare problem.
When I plug the hard drive and DVD into the power supply and turn the system on without connecting the ATA133 connectors, the drives power up. If I connect the drives to an other system, both are detected and usable. I've tried a different ATA133 cable and using either PATA controller on the motherboard. The drives work fine and the power supply works fine, but when the drives are connected to the ATA133 connector, either together or seperately, they are unable to recieve power.
Do you know what could be causing this? The only thing I can think of is a defective IDE controller on the motherboard.

Make sure the integrated IDE controllers you are trying to use are enabled in the BIOS. You will want to put the optical drive on one IDE controller and the hard drive on the other. i.e. don't have them both connected on a single cable. Check the settings - both should be on master or cable select.

Bizzare problem

Similar Messages

Maybe you are looking for