Black border around my mouse pointer

Since a few days, I have a thick black border around my mouse pointer, always following the movement of the pointer. How can I bring this away?
Thanks for help
Ueli

Welcome to Discussions - you need to go to System Prefs>Universal Access>Zoom, turn it OFF and make sure, that under Zoom options "show preview rectangle" is UNchecked.
Please post back and tell us if this works,
Miriam

Similar Messages

  • I have a black border around my video and I would like it to be full screeen

    I am running Premier Elements 10 on a PC and I am getting a black boarder around the video and I have rendered it multiple ways.   Is there a way to get it gone?  This is the link for youtube.  HCC 2014 video Final - YouTube
    Thank you
    Bruce

    Answers in CAPS.  But from playing with the file, it does not appear that I can get rid of the black border.   I would have to start again from scratch.    I tried a FV4 file format and a AVCHD.mp4 format and they both have black borders.   Any other suggestions on how to get rid of the border, or is it impossible at this point.
    Thanks Bruce KeenanPresident, Himalayan Children's Charitieswww.hccnepal.org
          From: A.T. Romano <[email protected]>
    To: Bruce Keenan <[email protected]>
    Sent: Thursday, November 6, 2014 6:14 PM
    Subject:  I have a black border around my video and I would like it to be full screeen
    I have a black border around my video and I would like it to be full screeen
    created by A.T. Romano in Premiere Elements - View the full discussionBruceKeenan Thank you for the reply with a lot of important details. With a 99.9999% certainty, I believe you issue is thata. you used 4:3 project settings for 16:9 source mediab. when you imported that 16:9 source media you used it as is without scalingit to get rid of the black border at the top and bottom of the frame caused by the 16:9 source ina 4:3 project. Apparently when you opened the new project, you accepted the default which is NTSC DV Standard 4:3 insteadof changing that to the project preset that would best match the properties of your source 16:9. For you to check out... a. Open a new project and, in the new project dialog, click on change settings, followed bychanging the project preset toNTSCDSLR1080pDSLR [email protected]   
    I OPENED A NEW PROJECT AND THE STANDARD SET WAS NTSC-DV-STANDARD-48kHz WHICH IS MY PROBLEM AS YOU POINTED OUT.    
     b. If you really want a F4V file HD, thenShareComputerAdobe Flash Videowith Presets = F4V - HD1080p (Flash 9 and Higher) If you want a MPEG2 file (SD), thenShareComputerMPEGSwith Presets = NTSC DVD Widescreen If you want a MPEG2 file (HD), thenShareComputerMPEG2with Presets = HDTV 1080p 29.97 High Quality If you want to explore with an AVCHD.mp4 file (HD), thenShareComputerAVCHDwith Presets =  MP4 - H.264 1920 x 1080p30 Lots to explore. And, there should be no black borders anywhere. If any questions or needclarification, please do not hesitate to ask. Thank you. ATR Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6906984#6906984 Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:  To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Premiere Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • How can I print with black border around edge of image?

    I'd like to add a black border around the edge of certain images I'm printing. I know it's fairly trivial in Lightroom, but I can't see where this option is in Aperture. Is this lacking in Aperture, or am I just missing it? Many thanks.
    PS -- I'm aware there are some plug-ins that claim to do this, so if Aperture can't do this, please feel free to chime in with comments on the best plug-in for this task.

    Rich Hayhurst wrote:
    Here's what you need:
    http://www.apple.com/downloads/macosx/aperture/apertureborderfx.html
    Aperture BorderFX 1.1
    Thanks, Rich. That's a good plug-in, and does cover what I need (with lots of other features, too). The problem, though, is it requires an export of the image, which I then have to either print from another application, or reimport to Aperture to print. I was hoping to find something that will either just apply the border to the print job, or that would serve as more of an Edit With . . . type of plug-in than an Export plug-in, so I can keep everything in one place. Thanks again.
    Message was edited by: jeffd55

  • How to get rid of the black border around the artboard

    Hopefully my last question for tonight.
    I need to get rid of the black border around the artboard. The two images show my drawing lined up with the art board and then inside the artboard. The dark gray is not the artboard.
    As you see, the artboard has a black border. I need to get rid of it. It shows up in my project when my color key is green. The black won't go to transparent.
    So how-to get rid of the border? Thanks
    ***Update***
    I figured it out. View > Hide Artboards. Maybe this will help someone. Doesn't change the fact my spider looks like a tick:)

    Doesn't change the fact my spider looks like a tick:)
    Try to get hold of a real spider and take a look at its anatomy, specially where the legs sprout from :-)

  • Blank black screen with just mouse pointer after logging in windows 8.1

    First of all On starting the system, it was taking much longer time than usual.. Then after logging in it showed only a blank black screen with white mouse pointer.. had to force shut down (shut down also took longer time).. on starting went to safe mode and ran extensive system check.. HARD DRIVE SMART CHECK PASSED but HARD DRIVE SHORT DST CHECK FAILED...I have the recovery discs and the notebook is under warranty..

    Hi 
              If your hard drive is failing on short DST test then you will need to contact HP in your local region and arrange with HP a repair ( Hard drive replacement )  .  You say your machine is still in Warranty then the cost of shipping and repair will be covered by HP .
                             Checkurtech
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****

  • How to remove black border around image files?

    I'm something of a beginner with Photoshop, so forgive me if I've missed something entirely obvious: for some strange reason I'm now getting a black border around all image files that I save through the "Save for Web & Devices" panel. Does anyone know how I can save without creating this border? It looks rather unsightly when I load it into a client site. The file in question is a .png, but I seem to be getting the same effect with all other image files as well.
    Thanks in advance,
    Shane

    One cause could be having the matte color set to something other than none.
    Is that a png-8?
    MTSTUNER

  • Black border around hotspots in Image map?

    I have an image map in my HTML file that contains three
    circular hotspots. When they're viewed in a browser, each one has a
    black border around it after it's clicked on. I've seen other help
    threads on the border problem talk about putting 'border:none" in
    the IMG tag, but there's no IMG tag..it's an image map and border
    is already set to "0". The code is below:
    <map name="satelliteLinks">
    <area shape="circle" coords="94,64,41" href="
    http://gi.leica-geosystems.com/LGISub5x307x0.aspx"
    target="_self" />
    <area shape="circle" coords="297,51,48" href="
    http://www.erdas.com/erdasCompanyNews.aspx"
    target="_self" />
    <area shape="circle" coords="517,59,43" href="
    http://www.erdas.com"
    target="_self" />
    </map>
    Any suggestions would be very helpful as my deadline to have
    this complete is today!!

    jgleica wrote:
    > I have an image map in my HTML file that contains three
    circular hotspots. When
    > they're viewed in a browser, each one has a black border
    around it after it's
    > clicked on. I've seen other help threads on the border
    problem talk about
    > putting 'border:none" in the IMG tag, but there's no IMG
    tag..it's an image map
    > and border is already set to "0". The code is below:
    > <map name="satelliteLinks">
    > <area shape="circle" coords="94,64,41"
    > href="
    http://gi.leica-geosystems.com/LGISub5x307x0.aspx"
    target="_self" />
    > <area shape="circle" coords="297,51,48"
    > href="
    http://www.erdas.com/erdasCompanyNews.aspx"
    target="_self" />
    > <area shape="circle" coords="517,59,43" href="
    http://www.erdas.com"
    > target="_self" />
    > </map>
    >
    > Any suggestions would be very helpful as my deadline to
    have this complete is
    > today!!
    >
    Thats the way the web works, its an accessibility feature, as
    its how
    you can tab around the page and see where the links are. Look
    at any
    website, click the link, and see what happens.
    Steve

  • Easy way to put black border around cropped video.

    Hi
    I was wondering if anyone knows of an easy way to put a 2-3 pixel black border around a cropped, shrunk video clip.
    Its kind of a picture-in-picture deal, but the "simple border" filter doesn't take into account the cropped edges. I've also tried drop shadow, but I need it to be hard lines.
    Any suggestions (I'm looking for the easy way because I need to apply this effect to about 100 clips, otherwise I'd just put a black colour matte behind the image).
    Cheers
    Chris.

    Layer the Boris Vector Shape generator around your clip. It's a great tool.

  • What about this black border around my movie?

    I've just started learning about iMovie. With a Canon Digital I've shot some test footage. Thing is, some of the clips have a black border around the entire movie where other clips have no border top and bottom but do have side borders. What gives? Many thanks.
    Mac Powerbook   Mac OS X (10.4.1)  

    The problem sounds like it could be an issue with what format you selected for the project when you first created it. iMovie gives you a choice of DV, DV Widescreen, HDV 1081, HDV720, MPEG-4. If you choose one format for your project, but the camera is not set for that particular format, you will see the black bars appear on the sides or around the top of your image.
    Which Canon camera are you using? Check to see what format the camera is recording, and make sure your new project matches this.
    If you find this helpful or if this solves your problem, make sure you indicate this by clicking the appropriate icon in the header of this reply.

  • Black border around all clips

    Hello
    I have a black border around all my clips from one camera even when I set the canvas to "fit to window" I'm having to scale up these clips to 138% to get them in line with other clips in the project. I suspect this may have been an incorrect camera setting but is it possible to fix them all in FCP without having to scale each clip individually?
    Many Thanks
    Adrian

    If you get one clip the way you want it, you can copy it, select all the others, right-click, choose "Paste Attributes", and check "Basic Motion".

  • Black border around games

    When I installed my games the game stretched to the edge of the screen.
    Today I tried to run a new game and now all my games have a thick black border around them and the game is small in the middle of the screen.  What happened?  How do I fix this?
    Only games have this problem.

    I am a newbie here and just wanna say Hi to everyone. I am Crystal from Louisiana, US.
    free photoshop tutorials

  • Black Border Around Footage

    Hello,
    I have a problem when I import footage into Final Cut. If it is from my camera in SD at 16:9 I get a black border around the footage. It looks like the footage is scaled down a bit but when I open it, it isn't. When I capture it, it looks normal and I can work with it in iMovie but as soon as it is in the timeline of FC it gets the rectangle around it.
    Please help, I need to fix the footage +by tomorrow+.
    -thanks

    Please be specific. What camera is this? What format are you shooting? What are the item proprieties for the clips? What are the item properties for the sequence? Do they match?

  • Black border around my desktop and everything is zoomed out?

    i have a macbook air and just this morning i noticed the desktop screen is zoomed out and there is a black border around the page, also when i go on safari or any other app everything is slightly zoomed out including text. even when i zoom in on the page it is still small and i still see a black border which covers the buttons to exit or minimize the page unless i go over it with my cruiser. how can i get the screen back to normal ?

    Try a NVRAM reset
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R.
    Turn on your Mac.
    Press and hold the Command-Option-P-R keys immediately after you hear the startup sound.
    Hold these keys until the computer restarts and you hear the startup sound for a second time.
    Release the keys.
    Above is an excerpt rom: How to Reset NVRAM on your Mac - Apple Support

  • Black border around screen

    Hello, I'm not entirely sure when this started but I have an annoying 1/4" black border around my screen. I think it has to do with scaling, but can't find an option within the integrated Intel HD Graphics to change built-in monitor.  This notebook has Intel HD graphics 4400, and is running the most current Intel Graphics HD and WIndows 8.1. Any help would be appreciated.  Thanks!

    , Hello and thanks for posting on the HP support forums.  The first step you should try is a system restore back as far as you can go.  This will change your configuration back and remove any updates that may have caused this. HP PCs - Using Microsoft System Restore (Windows 10,8) Here are a couple other links that may be of help. HP Notebook PCs - Troubleshooting a Notebook LCD Panel Issue (Windows 8/8.1, 7) And. HP Notebook PCs - Resolving Problems with Notebook Displays (Windows 7 and Windows 8) Please let me know how things go. Thanks again for posting and have a great day.

  • Black border around boxes and oval shapes

    I created some boxes and oval and circles in InDesign and it is placing a black border around the shapes. How can I get correct this? I am using InD CS6.
    Thanks,
    Joe

    Select the frames and go to Window>Stroke and change the stroke value to 0pts
    Or press "/" on your keyboard
    Or click the square in the tool bar on the left the bottom one and press the icon that has a red line going through it

Maybe you are looking for