Blackmagic Intensity Extreme do not work on iMac27 2011

i just bought Blackmagic Intensity Extreme yesterday. i try to play ps3 on imac, but it does not work. however, i found some imformation and some people can use it. is it can work on 10.7.3, or no? plz help me. thx

That's not what it is for, It's for recording and editing not playing straight through. Sony blocks there hdmi signal from being recorded with copyright protection, (who knows why). You can still use component cables to record PS3 gameplay though.
If you just wanted to use the iMac as a monitor I would return the Intensity Extreme and just buy the Playstation 3DTV with the $300.
No lag.

Similar Messages

FCPX & Blackmagic Intensity Extreme

My equipment: MacBook Pro (Retina Display, Mountain Lion 10.8.1.), Final Cut Pro X 10.0.5., Intensity Extreme, Zeiss Microscope with 1080p.
Is it not possible to put these things togheter to see the picture of my microscope on my MacBook? I tried so many different settings, but I could see anything on the sreen of my Mac. When I use Blackmagic Media Express with Desktop Video 9.6.2. I can see a picture, but why don`t it work with FCPX?
Thanks a lot for your help!
Joerg

I've tried to do this, and it doesn't seem to work
I bought a LaCie 4TB Thunderbolt hard disk, and streamed a gaming session to it from the Blackmagic Intensity Extreme, which worked well, but ended up with a 300Gb Apple ProRes 422 file.
As stated above, this is a capture of about 5 hours of gaming, but what I need to do now, is review the result, and do a "log and capture" of the file to reduce it to a bunch of sub-clips of the stuff I'm interested in. I can then throw away the original 300Gb file.
I tried renaming the disk to "Video", or "DCIM", but the Import from Camera dialog only showed my in-built camera. It showed the LaCie as a Camera Archive, but I can't open up the video files in there to do a "log and capture" from, it's wanting me to open an archive file.
So how do I create this archive file from the file I already have? Is there any other way to chunk up this 300Gb file, other than do it through FCPX as a "project".
How do I make an independant clip from a sub-clip?
Any and all suggestions appreciated!
Cheers,
- Rebecca

Blackmagic intensity extreme and adobe FMLE 3.2 question

I have been having some serious issues. FLME 3.2 keeps crashing when I have the capture device set to blackmagic intensity extreme. I am using 720p HD 59.94 as my settings.
If it is the settings how do I go about bringing it down to SD? I do not think there is a lower setting on my camera.
I am unhappily using a Sony Handycam HDR PJ200.
I would like to be using my Sony Evi D100, however those breakout cables on my blackmagic are very confusing.

Anyone know the answer to this?

Thunderbolt Display & PS3 & Blackmagic Intensity Extreme

Blackmagic Design, according to their website, is starting to ship their Intensity Extreme, which uses thunderbolt technology, this month. Google the Intensity Extreme, check it out, and get back to me. I think this may be our answer to connecting our beloved game consoles to this fine piece of technology.

My Intensity Extreme just arrived actually, but unfortunately I have not been able to get it working yet in recording PS3 gameplay. The documentation / technical support is abysmal. I am googling/youtubing around to try and get some help.

My samsung intensity 3 is not working

I got a brand new samsung intensity 3 on 8/1/2013 and the camera did not work after one photo. It was working fine right before I sat down for dinner tonight then I felt my phone vibrate in my pocket while eating and the phone expressed several failures. The keypad completely stopped working. I was able to see the main screen but I couldn't do anything. After removing the battery it worked for about 2 minutes then the keypad stopped working again. Then I tried charging it in my computer (to see if that would do anything) and the USB mode screen was stuck. I removed the battery again and let it sit for an hour. After re-inserting the battery, it started to work except for the soft keys and the "P" button on the keyboard. Then the screen started flashing and now the screen appears to go into sleep mode and the only reaction I receive is when I open the keybord (but still no functionality). I am dissapointed because 1. The chat service was unavailable all evening and 2. How am I supposed to call customer service without a working phone?

How far is the nearest verizon store, could you pop in there? We have one on every corner here it seems like. Do you have friends or family with a land line or cell you can use to call? Mary

After upgrading to Yosemite my wifi is not working on my 2011 MacBook Pro. What happened Apple? Wifi was fine on Mavericks.Yosemite was free. I guess you get what you pay for.

Why is my wifi not working after I installed Yosemite to my 2011 Macbook pro?

Keep it connected to the Power for a while.
Start up in Safe Mode.
http://support.apple.com/kb/PH14204?viewlocale=en_US
Any Bluetooth mouse with failing batteries nearby?

Send and Receive not working in Outlook 2011 Mac.

After doing a clean reinstall of Office 2011 the Send and Receive toolbar button does nothing when clicked. Performing a manual send and receive of the email account does not work either.
Note: Web Mail works fine.
Troubleshooting:
I’ve re-checked all account settings to ensure all settings are correct—they are.
I have recreated and reset my Outlook identities several times with no success.
I also rebuilt the Microsoft Database several times.
As a last resort, I performed a clean install of the entire Office package–twice.
Specs:
MacBook Pro OS X 10.9.5
Office 2011 updated to 14.4.8
POP3 email account

Hello
This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office or your question in any way. If you have issues or questions about Office, it's probably best you post Office related questions on Microsoft's own forums for their Mac products.
http://www.officeformac.com/productforums

Mobile.Me mail not working with Outlook 2011

Does anyone know what is going on with icloud email? It is not working this morning with my outlook 2011 this morning...

Yes to the password question. The incoming mail server address has p01 in the front which according the the settings page shouldn't be there. The address is pail in my account details and I can't seem to change it. The address I have for the incoming server is p01-imap.mail.me.com and it is this server which seems to be causing the problem - any ideas how I can change it to delete the p01 bit? Sorry - this is a bit beyond my knowledge!

Command F [find] function not working in Word 2011

It seems that my Command F function is not working properly...when I look for a term that I KNOW is in my document, sometimes it won't locate it. Sometimes it will only locate one instance of the word [in the sidebar] when the word actually appears multiple times in the document. And, if the word appears in my footnotes, the command F function will then only highlight the instances in which that word appears in the footnotes, but not in the main text [again, in the sidebar]. I've also noticed that the spotlight function does this as well [ie, I will use spotlight to search for word documents containing a certain term, and although I KNOW the term is in a certain document, spotlight will not identify that document as containing my search term].
These documents are a mix of ones that I created using Word 2011 and previous versions - the problem happens consistenly across all word files. And I'm not specifying any particular case for the terms (ie, I'm not searching for "Coffee" with a capital "C" and not getting any results because only "coffee" appears in my document).
I'm running Word 2011 on Lion OS. Please help - this is driving me insane.....

Sorry, this is the Office forum for Windows platform. Office for Mac related questions should really be posed in the following forums:
http://answers.microsoft.com/en-us/mac
Thanks for your understanding.
Tony Chen
TechNet Community Support

Automated Bullets Not Working in Word 2011 for Mac

Automated bullets are not working, whether I type * followed by a space or by a tab. I have verified Automatic Bullet Lists is selected under Tools / Autocorrect / Autoformat as You Type.
Any ideas?

Sorry, this is the Office forum for Windows platform. Office for Mac related questions should really be posed in the following forums:
http://answers.microsoft.com/en-us/mac
Thanks for your understanding.
Tony Chen
TechNet Community Support

Sound and Vibration Spectral map not working in LabVIEW 2011

I recently installed the latest development suite with LabVIEW 2011 and sound and vibration toolkit.
Previously I have successfully used the express function "spectral map" without a speed profile for plot type "frequency-time". With the installation of LV2011 I get an error saying "OA Speed Profile attribute not found" when using the function.
The setup is pretty straight forward with express functions "Simulate Signals", "Spectral Map" and "Color Map" in series.
Is there a bug fix or workaround for this problem?
Attachments:
Spectral Map Error.png ‏30 KB
Spectral Map VI.png ‏36 KB

No, I haven't been able to make the Sound and Vibration Spectral Map express node work in LabVIEW 2011.
A workaround is to not use the express function for a spectral map. You can find the spectral map node under "Sound and Vibration"-"Order Analysis"-"Spectral Map".
I guess the speed profile should be the same for both the express and ordinary function. If so you need to input a cluster of 2 1D arrays, not a waveform. Array1 contains the time in seconds and Array2 the associated speed.

Airport extreme card not working with leopard / G5

I just upgraded my PowerMac to leopard (G5 dual 1.8, 3 gigs of ram, 250 GB HD). I bought it new in December 2004 from apple. Previously I had been using a USB adapter to connect to my wireless internet at home (Linksys WRT54G). This device does not support leopard so I got an airport extreme card from gainsaver.com.
The Airport extreme card is configured properly as far as I know but it will only connect to my network for about 5 seconds then it drops. The USB adapter worked perfectly in the same spot and my macbook right next to it works fine as well.
1. Could it be a bad Airport extreme card?
2. Is this a known issue? And possibly be resolved with the 10.5.2 update?
It is a fresh Leopard install with no updates as I can not connect it to the internet to get them. Any help would be very much appreciated.
Message was edited by: anthonylkelly

Hi, I have the same machine (4 ram slots?) have you got the connector for the aerial that connects to the motherboard attached to your airport card. Mine works a treat.

Blackmagic Intensity Pro Card Not Recognized

I've got a Mac Pro 1,1 running OS 10.7.3 and FCP 10.0.3. FCP X doesn't recognize the card. I have FCP 6.0.6 running under 10.6.8. FCP and the card get along A-OK. Anyone have any troubleshooting guidance?

HI
Im having the same problem.
Im sure it says that it is supported in FCX.
I can get audio to output via, hdmi, but not the viewer.
Send viewer to external monitor is GREYED out...
The mac is seeing the external monitor, but not FCX.
Im awaiting a email back from Blackmagic....???
Any thoughts
ROB
Desktop Video 9.2 beta 1 for Mac OS X is available for download now and is free of charge for all Blackmagic Design customers. This update includes support for all current DeckLink, Multibridge, Intensity and UltraStudio models.
Broadcast monitoring in Final Cut Pro X 10.0.3 allows video output to external monitors and other equipment using the SDI, HDMI or analog video outputs from Blackmagic Design video hardware.
Desktop Video 9.2 beta 1 includes a new control panel for selecting the video output format from Final Cut Pro X for output to devices such as broadcast quality monitors, HDTVs and projectors, so you can see exactly what your master will look like in television colorspace.

Airport Extreme ethernet not working with Windows XP

Windows XP no longer connects to the Internet via the Airport Extreme ethernet port. XP says the cable isn't plugged in but when I connect XP directly to the DSL modem it works fine. When I connect my MacBook Pro to the Internet through the Airport Extreme ethernet port it works fine. (I'm sure it's connected by ethernet because I do +sudo ifconfig en1 down+.) I can't figure it out. I'm relatively certain Airport Extreme is blocking XP from connecting via ethernet but I'm not certain. It worked without a glitch for about two years. Lightning fried my old DSL modem and ever since I got the new one, XP "can't see" Airport Extreme, but will connect directly to the DSL modem and the net without a hitch. Any insight will be much appreciated.

I'm not sure why your PC is not able to connect to the AirPort Extreme Base Station's (AEBS) Ethernet port, but it is likely the lightning strike may have something to do with it. I'm also a bit surprised you're were able to run the "sudo ifconfig" command under Windows.
To rule out general communications issues between the modem and the AEBS, I suggest that you try a complete power recycle of all your network components as follows ...
Try the following, in order, checking for Internet access after each step, until resolved:
1. If the modem has a reset switch, use it to reset the modem. Wait at least 5-10 minutes for the modem to initialize.
2. Remove power from the modem. If it has a backup battery, remove this as well. Wait 5-10 minutes. Replace the battery, and add power back to the modem.
3. Perform a complete power recycle of your network components as follows:
Modem/Router Power Recycling - Quick
o Power-off the modem, AEBS, & computer(s); Wait at least 5 minutes.
o Power-on the modem; Wait at least 5 minutes.
o Power-on the AEBS; Wait at least 5 minutes.
o Power-on the computer(s)
If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
Modem/Router Power ReCycling - Full
o Power-off the modem, AEBS, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
o Power-on the modem; Wait at least 15 minutes.
o Power-on the AEBS; Wait at least 5 minutes.
o Power-on the computer(s)
4. Contact your ISP to have them perform a "modem reset."

My Airport Extreme is not working after power loss. How do I fix it?

Everytime there is a power loss at my house my AE dorsnt work for 4-5 weeks. Is there any easy fix, so I dont have to wait for 4-5 weeks every time?

Your AirPort Extreme is likely defective.
If it is in warranty, ask Apple to replace it. If it's not, you will need replace it, as a power outage should not do any more than turn off the AirPort until the power comes back up. This would really be the same as if you pulled the power cord from the back of the device and then plugged it back in later.

Blackmagic Intensity Extreme do not work on iMac27 2011

Similar Messages

Maybe you are looking for