Blank entry date S_AHR_61016362 - Flexible Employee Data

Good day all,
i know that there are a lot of posts refering to 0041 but none of the suggestions have solved my problem so please help me.
1. we are currently on ECC6
2. the entry feild in S_AHR_61016362 returns 00.00.0000 when i select "today" but is populated if i select "up to today"
3. "Up to today" gives additinal historical data which i do not need besides i really want to know what is the cause of the problem.
4. running the same report in DEV or QA returns the corect data...entry date fields are correctly populated
5. Note 562031 and 508026 were applied in 4.6c before we upgraded to ECC6.
Can anyone please assist??
thanks

Well, even this report works exactly the same way whether I select today or up to today in my ECC6 system.
As it is a standard SAP query, I do not believe anything could have gone wrong in the upgrade. When I upgraded a system some time back I remember we had to go into each and every z query and make some changes to make it work again.
Given that it works fine in your own DEV and QAS systems, I suppose it could be a data issue.
Are you able to debug and see?

Similar Messages

Flexible Employee Data report

Hi,
I'm trying to use flexible employee data report and in the output,
the report is showing the text of the fields, like Employee subgroup text instead of the codes we've given.
Is there any way of having the report generate the codes instead of the text? Pls let me know.
Thank you,
R S

Hi
I am not sure whether we can make changes in the standard reports setting. I hope you can use SAP Infoset Query to solve your issue.
Please follow the following steps for creating a simple report
FIRST STEP
SQ03
Create user group
SAVE
SQ02
Create Infoset
ZHCM_PD
Now select the required infotypes from the screen given
Then generate the infoset
Go back to infoset screen and you can see your infoset appearing in the initial screen
Now assign the infoset to the particular user group using role/user group assignment and Save
SQ01
Select Infoset Query
Open the ZHCM_PD and the following screen will be displayed showing the selection and output screen
********When you select output screen, the same will be displayed down. Just select one field and right click and select Only value**************
Select the required infotypes selection and output field and give the hit list to see the number of documents present
To see the output click on output screen
Please note that when you create the reports, you can select the output either by Only Value/Only Text/ value and text.
I hope this will resolve your issue.
Regards
Santhosh.S

Flexible Employee Data (S_AHR_61016362)

Dears ,
              while running transaction code S_AHR_61016362 , the data was executed correctly
              but the job data is 0000000
              although every position linked with a job , please advice me
Best Regards ,

Hi Waleed,
Did you maintained jobs for all employees in IT 0001, did you assigned jobs to positions properly?
Create a new job assign it to the position and hire a new employee assign the job and position in IT0001 and check once.
Hope it will work.
Regards,
Prasad.

Blank field getting converted into wrong date

Dear All,
I have one date field in SAP table in which there are some entries and some blank entries.
when Proxy is sending this data from ECC blank entries are converted into 00000000 and through XI in file
this
00000000 entry for date getting converted into wrong date like 30.11.0002 in file.
I have taken data type as string do I need to take data type as date.
My doubt is if there is no entry in table why it is convertng to 00000000 and after passing from XI why it is converting into
30.11.0002 .
Regards

Hi ,
My date format like this
source --yyyyMMDD
target-DD.MM.YYYY
so if
source is
00000000
should comes like this
target
00.00.0000
but it is converting into
30.11.0002
every where in file values for 00000000 is coming like 30.11.0002
Regards

Employee date change after pay roll run

HI sapiers,
i have an issue
one employee join on 10th of the may but in sysytem it was enterd as 13th of the may
and pay roll was processed to that employee
now can we change the employe join date now
if yes how can we do this
please help me its urrgent
thanks in advance
shjish khan

Hi Shajish,
There are three scenarios when you may need to change hiring date:
1) After payroll is run - when hiring date is before actual Hiring date.
2) After payroll is run when hiring date is after actual Hiring Date.
3) Before the payroll is run.
1) PA30 -- Copy actions info type - action type - incorrect entry -- save and come out PA 30 copy actions info type -- action type - correct entry - now correct your entries, save your date is changed.
2) PA30 - Utilities - change payroll status - delete accounted to field, save and come out - then again utilities change entry leaving date - correct the hiring date - save and come out.
3) PA30 - Utilities change entry/leaving date change your date and save.
Try this aslo
Go to PA30
Enter personnel number.
Select action infotype.
Select subtype hire mini master record.
Change to new date.
Under reasons, select new position.
Click save.
Please refer the below links:
http://help.sap.com/saphelp_470/helpdata/en/48/35c5c34abf11d18a0f0000e816ae6e/content.htm
http://help.sap.com/saphelp_470/helpdata/en/48/35c5c34abf11d18a0f0000e816ae6e/frameset.htm
http://help.sap.com/saphelp_46c/helpdata/en/1b/3e5c16470f11d295a100a0c9308b52/frameset.htm
Also we have several threads in the forum related to this.
http://scn.sap.com/thread/1185695
http://scn.sap.com/thread/1185695
http://scn.sap.com/thread/2012142
http://scn.sap.com/thread/1466306
Thanks,
Madhav

Simple question on uploading reported Fin. data with Flexible upload

Hi.
I am trying to upload Rep. Fin. Data with Flexible upload. I found that the all CR item should have the number with - sign. Firstly I think that Dr/Cr sign field in FS item will work for deciding the sign of all number but it doesn't seem to be. Is my finding right?
or do I missed something?.
I just followed the help as below
Data Entry
Debit/Credit Sign
You define a fixed debit/credit sign so that item values can be entered without the need for specifying the debit/credit sign (for example, in manual data entry or in flexible upload).
● You enter a debit (plus/) sign for asset items and expense items.+
● You enter a credit (minus/-) sign for equity and liability items and revenue items.
When you enter item values, you only enter absolute amounts or quantities. When the values are written to the database, the system multiplies each entered value by the debit/credit sign of the item (and when applicable, by the debit/credit sign of the item's subassignment).
If I missed anything, please advise me.
If my finding is right, please let me know what is the use of DR/CR sign in FS item.

Hi,
Your findings are correct.
Your may have (and may use) the sign of FS item and sign of MovementType. They may work during data load, in order to place data into database with the proper sign. That's all.

Massive data input for employees Transaction

Hi experts!
I need to perform a massive data input for employees. Iu2018ve tried with de Tx PA71 u2013 Fast entry of Time Data - but It needs a document or a manual preselecting.
Its necessary selecting ranges of personnel number in order to perform a massive data input for employees as a salary benefit or bonus for a group of employees.
Do you know that kind of transaction?
Thanks in advanced!

Hi ,
You could also use T Code : SCAT/SCEM for mass upload or deload.
You may use below method to create SCAT in ECC (This is not a Direct method)
1) Run transaction SCEM
2) Enter a CATT name
3) Click on change, prompt appears saying it doesn't exist, do you want to
create. Click yes.
4) Enter the TCODE to record.
5) Execute the TCODE and save data.
6) Back out. Click End and copy button.
7) Double-click the TCD on the left side of screen
8) Click F5 or Field Inputs Variants
9) Use black down-arrow to step through screens.
10) Double click on fields to set variables. (SAP adds leading & to each
variable name).
11) Save and back out.
12) Go to menu path Environment --> Extended CATT.
13) Click change and change type from (M) Manual Test Case to (C) CATT.
14) Assign component.
15) Click save. Back out.
16) Execute SCAT and Go to --> Variants --> Export Default and save as text
file.
17) Edit file with new test data.
18) Execute CATT.
After step 6 you can also leave SCEM and run SCAT and perform the
parameterization there as usual.
Hope this helps.
Inputs for Neeraj.

Master Data InfoSource (Flexible Update)

Hello Everyone,
I have a small doubt regarding a Master Data InfoSource (Flexible Update). I see that there are two data targets for this infosource. They are Attribute data target and text data target.
My question is, do i have to create 2 separate InfoPackages to load the 2 data targets (one each for attribute and text) or a single infopackage will be enough for both.
I created an infopackage and chose Attribute data target. When i checked the contents, i see that even the text data target is populated with data even though i didn't choose it in the infopackage. Also, i get multiple entries for each record (time period 1000-1899 record and time-period 1900-9999 record). How to get only a single entry.
Could someone help.
Thanks.

Hi Sachin,
This post should help to clarify why different records exist with different to and from dates:
Re: Master data
Hope this helps...

How to verify employee data

Hi Gurus,
Please i need assistance, my client wants when entring employee data in personnal data, his boss should check his entries and veryfy that it is ok during hiring, this is to check if he has made some mistakes in his entries,
How can I set his employee data to get to his boss for verification and approval after enries has been made?
Tanx.
Maureen.

Hi,
Simply you have to maintain Personnel Administrators as bosses and after the hiring action workflow will be trigered to the bosses that new employees have been hired under them. After that Bosses can check the personnel Data in PA 30.
Regards,
Kapil

How to avoid printing a blank page when there is 'no data' in the report.

how to avoid printing a blank page when there is 'no data' in the report.

try like this
if@section:IND=1
this template
end ifsectionbreak
if@section:IND=2
this template
end if

Hi I'm running Addressbook and cannot clear previous entry easily when searching my data base of around 5,000 contacts. I prefer to view in All contacts on a double page spread with details on the right page. Searching doesn't seem to work correctly i

Hi I'm running Addressbook and cannot clear previous entry easily when searching my data base of around 5,000 contacts.
I prefer to view in All contacts on a double page spread with details on the right page. Searching doesn't seem to work correctly in this view.
It's always the second search that is problematic.
I've tried typing over and all it seems to do is confine the search to the the entries that have come up for the previous search.
I've tried to use the x to clear the previous entry and then type the next search, same problem. The only way seems to be to move from "All Contacts" to "Groups". Then the searched name appears and I can return to All Contacts to see full details.
Surely three key press' are not the way it's supposed to work?
FYI
Processor 2.7 GHz Intel Core i7
Memory 8 GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 512 MB
Software Mac OS X Lion 10.7.3 (11D50d)
Address book Version 6.1 (1083)
MacBook Pro, Mac OS X (10.7.1), 8Mb RAM 2.7Ghz i7

AddressBook experts are here:
https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion#/?tagSet=1386

How to find out the Hire date of an employee?

Hi All
What is effective date, Latest start date and other date fields which are are used when we create a new employee?
What is the difference between hire date and joining date?
How to find out the Hire date and joining date of an employee?
Regards
Rahman

The effective dates are related to date tracking. The effective start date shows when this version of the record became effective.
The Hire Date, or Latest Satrt Date shows the date on which the employee was last hired. If he was hired before from 01/01/01 to 31/12/01, then left but was hired again from 01/01/07, the Latest Hired Date would be 01/01/07 and the First Hired Date would be 01/01/01.
When using Oracle HR, datetracking allows you to either correct data (because it was wrong or incomplete), or update it (because a time effective change took place e.g. got married).
The[b] effective dates show when a record was updated. So, if an update was made on 07/02/07, and the update datetrack option was used, the current record would have its effective end date set to 06/02/07 (the day before the update) and a new version would be created with the updates and an effective start date of 07/02/07.
Hope this helps.

Employee Data for Business Partner

Hi All,
I am using BAPI_BUPA_CREATE_FROM_DATA as a Function Module in a program to create Business Partners by reading data from an Excel file.I am able to create business partners but I couldn't find the BAPI using which I can add Employee data for "Employee" role of a new Business Partner.
Can anyone help me out in this regard.
Kind Regards,
Deepti

Hi Deepti,
You can see if the function module BAPI_BUPA_FS_EMPLOYM_ADD is more appropriate for you.
Regards
Venu

General Data iView under Employee Profile

Hi All,
I need to change the General Data file under Employee Profile in MSS.
The file name is: com.sap.pct.hcm.eeprofilegeneraldata.par
Right now the display under GEneral data in portal shows positon name but i need to show the position Number also..the concerned JSP file inside the above said PAr file uses Java class method like data.getPosition() to fetch the position name.
NOw i am not sure how and by which method i can fetch position number too and display it.
COuld anyone help/advice..
thanks

Hi Mate,
quite new to these things..but i extracted my par file via WINRAR and i have to change my JSP page..i am able to change it but thing is i don know which method i have to use to fetch the posiiton number.
The JSP code is like this -
<%@ page import="java.util.ResourceBundle"%>
<%@ taglib uri="htmlb" prefix="hbj" %>
<jsp:useBean id="data" scope="request" class="com.sap.pct.hcm.employeeprofile.generaldata.GeneralDataBean" />
<jsp:useBean id="cKey" scope="request" class="com.sap.pct.hcm.orgmanagementeventing.CKey" />
<hbj:content id="myContext" >
<hbj:page>
    <%= cKey.getJavaScriptForURLCaller() %>
    <% ResourceBundle rb = componentRequest.getResourceBundle(); %>
    <%
        String payType;
        String payArea;
        String payGroup;
        String payLevel;
        if(data.getCompensationType()==data.TYPE_PAY_SCALE){
            payType = rb.getString("pay_type");
            payArea = rb.getString("pay_area");
            payGroup = rb.getString("pay_group");
            payLevel = rb.getString("pay_level");
        } else {
            payType = rb.getString("sal_type");
            payArea = rb.getString("sal_area");
            payGroup = rb.getString("sal_group");
            payLevel = rb.getString("sal_level");
    %>
    <hbj:form>
          <%= cKey.getHiddenFormField() %>
          <%= cKey.getJavaScriptForEventReceiver(componentRequest, myContext.getCurrentFormId()) %>
          <table border="0"><tr><td colspan="7">
              <hbj:textView text="<%=data.getName()%>" design="HEADER2"/>  <hbj:textView text="<%=\"(\" + data.getPERNR() + \")\"%>" design="HEADER3"/>
          </td></tr>
          <tr><td colspan="7" height="5px"></td>
          <tr>
            <td colspan="3"><hbj:textView text="<%=rb.getString(\"group_contract_data\")%>" design="HEADER3"/></td>
            <td>   </td>
            <td colspan="3"><hbj:textView text="<%=rb.getString(\"group_communication\")%>" design="HEADER3"/></td>
          </tr>
          <tr>
            <td><hbj:label id="la" labelFor="a" text="<%=rb.getString(\"work_contract\")%>"/></td><td> </td><td><hbj:textView id="a" text="<%=data.getWorkContract()%>"/></td>
            <td></td>
            <td><hbj:label id="lb" labelFor="b" text="<%=rb.getString(\"email\")%>"/></td><td> </td><td><hbj:link id="b" reference="<%=\"mailto:\"+data.getEmail()%>" text="<%=data.getEmail()%>"/></a></td>
          </tr>
          <tr>
            <td><hbj:label id="lc" labelFor="c" text="<%=rb.getString(\"hire_date\")%>"/></td><td></td><td><hbj:textView id="c" text="<%=data.getEntryDate()%>"/></td>
            <td></td>
            <td><hbj:label id="ld" labelFor="d" text="<%=rb.getString(\"office\")%>"/></td><td></td><td><hbj:textView id="d" text="<%=data.getOffice()%>"/></td>
          </tr>
etc etc----
if you see here they are using method like getEmail() etc for displaying data on front end screen.
at the top of this file there is a bean file included -
<jsp:useBean id="data" scope="request" class="com.sap.pct.hcm.employeeprofile.generaldata.GeneralDataBean"
this must be having all methods..bt i don know where this bean file can be acceessed? i cant see it anywhere in my extracted PAr file.
The only requrement of mine is to display postion number next to the text(text is already getting displayed)..

In mdx how to get max date for all employees is it posible shall we use group by in mdx

in mdx how to get max date for all employees is it posible shall we use group by in mdx
example
empno ename date
1 hari 12-01-1982
1 hari 13-06-2000
by using above data i want to get max data

Hi Hari3109,
According to your description, you want to get the max date for the employees, right?
In your scenario, do you want to get the max date for all the employees or for each employee? In MDX, we have the Max function to achieve your requirement. You can refer to Naveen's link or the link below to see the details.
http://www.sqldbpros.com/2013/08/get-the-max-date-from-a-cube-using-mdx/
If this is not what you want, please provide us more information about the structure of you cube, so that we can make further analysis.
Regards,
Charlie Liao
TechNet Community Support

Blank entry date S_AHR_61016362 - Flexible Employee Data

Similar Messages

Maybe you are looking for