Blank lines between [ pre ] tags are now being removed
Using [ pre ]
SQL> select 'where has the space gone' from dual;
'WHEREHASTHESPACEGONE'
where has the space gone
Elapsed: 00:00:00.60Using [ code ]
SQL> select 'where has the space gone' from dual;
'WHEREHASTHESPACEGONE'
where has the space gone
Elapsed: 00:00:00.60Unfortunetley [ code ] does not recognize internal [ b ] tags for bold
Can this be fixed?
Message was edited by:
3360
Sorry, forget it. I had to use IE instead of Firefox a couple of weeks back and it is just the browser, I checked and the posts look fine in Firefox.
Message was edited by:
3360
Message was edited by:
3360
2 years later, is it possible to get a fix regarding this inconvenient for the IE users ?
Or does Firefox usage became mandatory to read properly the code ?
Nicolas.
Similar Messages
-
Office 2010 Don't print blank lines when data fields are empty
How do you do this in office 2010? Where do we go now?
This used to be under the Tools menu in previous versions:
On the Tools menu, click Mail Merge.
In the Mail Merge Helper dialog box, click Merge.
NOTE: You must select the main document and data source for the merge before doing step 2.
In the Merge dialog box, under When Merging Records, click either:
Don't print blank lines when data fields are empty.
-or-
Print blank lines when data fields are empty.
Click Close in the Merge dialog box, and then click
Close in the Mail Merge Helper.
NOTE: If you made no changes in the Merge dialog box, the
Close button is not available. Click Cancel instead.
Back to the topHi,
In Word 2007 or Word 2010, you can add
Mail Merge Helper to the Quick Access bar, and perform the steps then.
To add the
Mail Merge Helper command in the Quick Access Toolbar in Word 2007, follow these steps:
a.
In Word 2007, click the
Microsoft Office Button, and then click Word Options >
Customize.
In Word 2010, click File > Options > Customize Ribbon.
b.
Click
All Commands in the Choose commands from, and then click
Mail Merger Helper in the Choose commands from list.
c.
Click
Add, and then OK.
Best Regards,
Sally Tang -
Need a Blank line between Text field data
hello friends, Happy New Year..
i have a varchar2(200) size field and i am Entreing data into it like this;
Chairman Name1
Member Name2
Member Name3
Member Name4
Member Name5
Member Name6
Secretary Name7what to do is, insert an a blank line between all lines of this text field. The output to like this ;
Chairman Name1
Member Name2
Member Name3
Member Name4
Member Name5
Member Name6
Secretary Name7The names are separated by pressing Enterkey (i dont know its equivalent chr(10) or chr(13).
TYVM.You can also try the below :
Assumption here is that you will always have data in that column in 7 lines.
rec.rowno in (2,4,6,8,10,12,14) is included to create empty row in between each row.
create table test(a varchar2(200));
insert into test values('Chairman Name1
Member Name2
Member Name3
Member Name4
Member Name5
Member Name6
Secretary Name7');
commit;
select
case
when rec.rowno = 1 then
substr(a,1,instr(a,chr(10),1,1) - 1)
when rec.rowno in (2,4,6,8,10,12,14) then
null
when rec.rowno = 3 then
substr(a,(instr(a,chr(10),1,1)+1),instr(a,chr(10),1,2))
when rec.rowno = 5 then
substr(a,(instr(a,chr(10),1,2)+1),instr(a,chr(10),1,3))
when rec.rowno = 7 then
substr(a,(instr(a,chr(10),1,3)+1),instr(a,chr(10),1,4))
when rec.rowno = 9 then
substr(a,(instr(a,chr(10),1,4)+1),instr(a,chr(10),1,5))
when rec.rowno = 11 then
substr(a,(instr(a,chr(10),1,5)+1),instr(a,chr(10),1,6))
when rec.rowno = 13 then
substr(a,(instr(a,chr(10),1,6)+1))
end name1,
null signature,
null "DATE"
from test, (select rownum rowno from dual connect by level <= 14) rec;Edited by: neel_s on Dec 31, 2009 1:07 PM -
No blank line between address node in smartform
hi all ,
customer want to delete the blank line between address , is there a way to solve this ? i just want to use the address node.
regards
KevinFor the paragraph format used with the ADDRESS command, indicate that you don't want blank lines.
Eg. /: ADDRESS PARAGRAPH ZD
So for this Paragraph Format 'ZD' check the checkbox 'No Blank Lines'. -
Export Excel Data only causes blank line between 2 lines of records
Hi,
I wrote a complete winform application using CR2008.
For information :
C# Framework 3.5
Windows XP SP2 or Windows Server 2003 SP1
CR2008 SP1
Application allow to preview report. In the preview window (CR activx) there is a "letter icon" to export report in several format.
-RPT
-PDF
-DOC
-XSL
-XSL Data only
When I export with "Excel Data only" format, I always have a blank line between 2 lines of records in Excel.
Is there a way to supress them from VS2008 ?
Thanks a lot for your reply,Hello, Jonik;
Do you see the same blank lines when you export to Excel Data only in the Crystal Reports designer?
Elaine -
DHCP Option Tags are not being applied...
Hi,
About to loose my mind... basically we are working towards a small WYSE Thin Client deployment in our environment. The WYSE clients require to receive certain DHCP Option Tags to find the WCM server of which they receive their configuration from. Same
applies to the WDM Server as well. The problem is no matter what we do, our test client is not receiving the custom option tags we've defined in our DHCP server.
DHCP Servers:
vlan41
10.40.1.206
10.40.1.207
Test Client:
vlan46 - ip helpers defined on the switch
Set to receive the same ip address from the DHCP server through the reservation route.
Option Tags:
186 - WDM Server - 10.40.1.184
195 - WCM Server - 10.40.1.185
196 - WCM Path - /
I've installed Wire Shark on the test client to monitor the DHCP activity. The above custom options tags are not being pushed on to the client.
The Router, DNS Server and Domain Tags are being pushed. So it's working but also not working????!!!
Anybody with some insight to this problem?Hi hpaul_p
In all fairness I'm about to give up... the vendor is not coming up with a solution and constantly blaming Microsoft. To further test and confirm this wasn't a network issue, I've setup a secondary test environment using a 4 port switch, a client and
a DHCP server. Same results!!! I'm really running out of time, so my work around is this: I've setup a SRV records pointing to the WCM server... in your case this would be SRV record for the WDM server. I've disabled the auto
discovery functionality of the WDM Agent, for some reason it seems to be clashing with the WCM agent. Since you will be using WDM only, don't disable auto discovery, tick the DNS SRV record from the Discovery Settings under the client agent.
I'm going to add the clients to the WDM server manually through their ip addresses so don't need auto discovery. From what I gather from the manuals the WCM searches for the repository or conifg servers in this order: 1. SRV 2.DNS (A record)
3.DHCP (Options), I bet it's the same with WDM. Though SRV and DNS methods has their limitations, if you will be using the default paths and credentials it shouldn't be a problem. This is all I have have. Steven Song I've forwarded you the
DHCP database, if you find any problems with it please let me know. -
When writing a new message I used to see two lines of address boxes followed by the subject line. So, when sending an email to a single recipient, that persons address would remain on screen as I composed the email.
As of version 31.4 the initial "Write" window shows a single address line, the subject line, and a blank line between them. The consequence is that, upon entering the recipient's address, it immediately scrolls up and can no longer be seen. This happens regardless of how I enter the address i.e. start to type, select from address book and hit ENTER or TAB, or indeed if I choose an address from the address book sidebar. (See "capture1.png")
If I increase the space available for the header data in the "Write" window I still get a blank line between the address lines and the subject line (see "capture2.png"). Furthermore, the next time I go to compose an email I am back with the original version of the "Write" window, as shown in "capture1.png".You might want to drop the author an email and let him know. It is not a major thing, but something that would probably require only a minor fix.
I have found him helpful, but slow to reply. He is always on holidays when I email him. -
Why did this pop up today?
Your Apple ID and phone number are now being used for iCloud on a new iPhone.Turned on my Mac Pro a few minutes ago and I got the following "POP-UP" message.
" Your Apple ID and phone number are now being used for iCloud on a new iPhone. " ( my iPhone is not new. )
" If you recently signed into "xxxxx iPhone" you can ignore this notification."
On the bottom of this pop-up window is an "OK" button. Well it's NOT "OK" No option is offered if it is not "OK".
I have made no changes to my iPhone whatsoever. Just normal use today. In my iCloud settings everything is turned off except sharing Contacts.
I'd suggest you log on to iCloud.com with your Apple ID, and then go to Settings and look in the "My Devices" settings for anything you don't recognize.
I just did this. All of the devices are iPhones, iPads, and Macintoshes that I own and am familiar with. -
The following message popped up on my MacBook Air: Your Apple ID and phone number are now being used for iCloud on a new iPhone. What does it mean?
Hi SLCfromMadison,
This is the message that you'll receive when your Apple ID is signed into on an iPhone. If you haven't done so, the article linked below details a number of steps that can help verify the security of your Apple ID should you think that an unauthorized person has access to it.
If you think your Apple ID has been compromised
http://support.apple.com/en-us/HT204145
Cheers,
Allen -
Since a recent trip to Mexico, Safari and other browsers are now being taken over or manipulated by other web sites. I installed adblock and the situation is getting worse. What to do?
Click here and follow the instructions, or if there’s a type of adware not covered by them on the computer, these ones. If you're willing to use a tool to remove it(you don't need to, but may find it easier), you can instead run Adware Medic; this link is a direct download.
(122386) -
All of my texts are now being sent through my email after the new update. How do I change this back to just sending with my phone number?
Try settings -- messages -- send & recieve and see if your email and phone number are in there and if there is only a check mark next to your email address. If so just check off your phone number and try that.
-
I rec'd an alert that my "Apple ID and phone no. are now being used for iCloud on a new iPhone." I am not using iCloud and I don't have a new iPhone. Is this something to worry about?
Howdy Libbidydooda,
There are a couple of possibilities that may apply to the email you have received regarding your Apple ID. The first is that the email may be a legitimate warning that your Apple ID has been compromised. For this reason I would suggest that you change the password to your Apple ID as soon as possible. Use the instructions on this page -
Apple ID: Changing your password - Apple Support
In order to increase security for your Apple ID you may want to set up and use two-step verification. See this article for information about it -
Frequently asked questions about two-step verification for Apple ID - Apple Support
The second possibilty is that the email is an attempt at "phishing" in order to get you to reveal personal information. Typically this is done with an email that looks like it comes from an official source but has links to web pages that, while they may look like they are real, may actually be gathering your information for use by others. This article has more information about phishing -
Identifying fraudulent "phishing" email - Apple Support
For this reason it is important that you do not follow any links in the email, as they may compromise your security.
Thanks for using Apple Support Communities.
Best,
Brett L -
Insert a blank line between records
Hi,
I am creating a sqlplus report and want to insert a blank line or some seperator to seperate the records between the start and end points of the loop to make it more readable.
ex : The output currently look like this.
ColumnA ColumnB
1 2
2 3
3 1
4 5
5 6
6 4I want the output to look like this
ColumnA ColumnB
1 2
2 3
3 1
4 5
5 6
6 4Thanks for the help in advance!Hi,
You probably work with this table every day, and you probably struggled with this particular query for a while before posting a question, so you're very familiar with the table, the data, and the application.
Perhaps no one else in the world is in that position. Don't assume we know what your data is, or where it came from.
Are you getting the data from a query like this?
SELECT columna
, columnb
FROM table_x
START WITH columna IN (1, 4)
CONNECT BY NOCYCLE columna = PRIOR (columnb)
;If so, that's the kind of thing you should say clearly in your first message, rather than hint at in your third.
As Ow said, you should manufacture a column for use in the BREAK command, and use COLUMN ... NOPRINT if you don't want to see it in the results?
The question here is, what is an appropriate column? CONNECT_BY_ROOT seems to work perfectly for your example
BREAK ON my_break_column SKIP 1
COLUMN my_break_column NOPRINT
SELECT columna
, columnb
, CONNECT_BY_ROOT columna AS my_break_column
FROM table_x
START WITH columna IN (1, 4)
CONNECT BY NOCYCLE columna = PRIOR (columnb)
;The rest of this message is an merely a tangent. I find it interesting, but feel free to skip it.
You might think CONNECT_BY_ISCYCLE was an obvious choice for a BREAK oclumn: you want to skip a line after every output row where CONNECT_BY_ISCYCLE = 1.
Unfortunately, BREAK always works when a column value changes. That is, you can't tell it "Please skip one line after rows where columnz = 1"; all you can say is "Please skip a row before rows where columnz is different than it was on the previous row". (At least that's what I think: I would love it if someone proved me wrong!)
So we have to manufacture some column that keeps its value for an entire loop. The SUM of CONNECT_BY_ISCYCLE (in DESCending order, as returned by the CONNECT BY query) would work. Analytic ORDER BY clauses seem to destroy the order imposed by CONNECT BY, so you'd have to do the CONNECT BY in a sub-query, capture the ROWNUM to preserve the order, and use the analytic SUM function in the main query:
WITH oq AS
SELECT columna
, columnb
, ROWNUM AS r_num
, CONNECT_BY_ISCYCLE AS cycle_val
FROM table_x
START WITH columna IN (1, 4)
CONNECT BY NOCYCLE columna = PRIOR (columnb)
SELECT columna
, columnb
, root
, SUM (cycle_val) OVER (ORDER BY ROWNUM DESC)
-- AS my_break_column
FROM oq
ORDER BY r_num
;The only reason for actually doing this is to learn about CONNECT BY queries. CONNECT_BY_ROOT, as shown above, works much better for your requirements. -
Podcast explicit tags are not being recognized
I'm using Squarespace as my website host, and have followed their instructions to insert the iTunes Explicit tag into our feed before submitting to the iTunes store. Unfortunately, after extensive testing with Squarespace support, the tags are being read properly in the XML feed, but each time I attempt to submit via iTunes, the Explicit tag is not recognized. Any help would be greatly appreciated.
Here is a copy of the XML output (provided by Squarespace support)
https://img.skitch.com/20120328-t5g175qa2mf3wr3t86ay7rtmwr.png1. Try resetting your SMC.
Resetting the System Management Controller >>
2. Your laser pickup could be dirty. You can buy a cleaner disc for that.
3. It may be the media you're using, but it nothing is recognized, it may be hardware related.
4. Run your hardware tester.
5. Is your optical drive being recognized in your System Profiler?
-Bmer
Mac Owners Support Group - Join us @ MacOSG.com
Mac611 Mobile Mac Support - about.Mac611.com
iTunes:MacOSG Podcast | YouTube.MacOSG.com
An Apple User Group
Have an iPhone or iPod touch? Enter Mac611.com in Safari on it for 'mobile Mac support.' -
Removing Line between Div tags
Hi all. I am new to this forum - have just started using DIV Tags and am getting a bit messed up!! I have a simple web page that has 2 DIV statements - on loads a menu bar I have created in Fireworks and is rihgt justified, the other is a header that contains an image and is centred. I have specified a coloured page background. Trouble is, I have a line between my two div tags that shows the background colour! I just cant get rid of it - I have tried the "Display - Inline" but that doesn't work. I have tried "Float Left" and "Right" - no-good. I dont know what to do! It could be that I am using these commands in the wrong place? There seems to be quite a lot of stuff on the net about this issue but I cant get any of the solutions to work for me. Please can anyone help?
Here is an example of my code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<style type="text/css">
body {
background-color: #C90;
.menu {
BACKGROUND: #000000;
.header {
BACKGROUND: #000000;
</style>
</head>
<body>
<DIV class=menu align="right" >
<P> </P>
<P> </P>
</DIV>
<DIV class=header align= "center">
<P> </P>
<P> </P>
<P> </P>
</DIV>
</body>
</html>This is invalid markup.
<DIV class=menu align="right" >
</DIV>
<DIV class=header align= "center">
</DIV>
CSS should look like this:
body {
margin:0;
padding:0;
background: #C90;
color: #000;
#wrapper {
width: 970px; /**some value in px, % or ems**/
margin: 0 auto; /**with width, this centers page**/
background: #FFF;
border: 2px solid #000;
#menu {
background: #000;
text-align:right;
margin:0;
padding:0;
#header {
background: #000;
width: 970px;
margin:0 auto;
padding:0;
Then add the relevant selector ID (or .class) to your markup like so.
<body>
<div id="wrapper>
<div id="menu">
your menu code here
</div>
<div id="header">
your header here
</div>
<p>your content goes here<p>
<!--end wrapper--> </div>
</body>
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
Maybe you are looking for
-
How can I put songs of a different album together?
I've got an album and I'm trying to put a missing song in the same group, but iTunes keeps separating it.
-
BAPI_GOODSMVT_CREATE using inbound delivery with HU
I have a program that uses BAPI_GOODSMVT_CREATE to GR Post the inbound delivery. The inbound delivery is created thru ASN. But I encounter error message BORGR 637 "Inbound delivery cannot be packed". This error occurred because item packing status
-
Problem in compiling with ant?
Hi, I have problem with compiling using ant ..i have build file...and properly place directories....... C:/>ant build It's giving an error as "Exception in thread "main" java.lang.NoClassDefFoundError: build" can any one help me to solve this problem
-
Modify contrast with an external display
When my external display are connected, I can't modify contrast with shortcut F1 or F2. Someboby have en issue ? How I can switch off imac screen and use my external display ? Regards, Thanks pepito
-
REM Product cost collectors and Production version
Hi All, Can some one pls let me know What are the product cost collectors in REM and how to create the product cost collectors ? What is the production version and the difference between production version and controlling version? Thanks & Regards, B