Blazeds client can't keep up with realtime updates = discard?

Hi all,
I'm doing an application that provides realtime data to users via blazeds, the flex client uses a long pooling mechanism to get stream of data from the server. The question that my team has is, if multiple clients connected to a topic and one of the clients couldn't keep up with the rate of data produced, will the message be kept in blazeds until that client can retrieve it? If it is, then this will create a bottle neck for that particular client and will burden the server as more and more messages have to be kept in the server. Is there anyway to set an expiry time on a message and discard those messages?
Thanks in advance.
- Andrew

I am also facing tghe same problem today. I cannot believe I
was unable to find a single help on this. i've been trying many of
the options but things are getting worse and worse. Now I can't
publish from Dreamweaver and Contribute also!! Why Adobe doesn't
support the ones who upgrade their software?
quote:
Originally posted by:
akaijen07
I'll first start by saying that my client has been happily
editing and publishing files since February. Recently, she was on
vacation so I made a couple of minor updates using Dreamweaver. Now
she's back, and is no longer able to publish. I'm not sure it's
related. The error message is:
"Contribute encountered a network or file system error.
Please try the operation again, and contact the administrator if
the error continues to occur."
The problem started yesterday, but briefly corrected itself.
Now she can't publish at all. I have asked her to go step-by-step
through the process of editing files and I can see the following
activity on the server:
-- She opens the file (index.html) and the following file
appears on the server: index.html.LCK
-- She hits "publish" and the following file appears on the
server: index.html.new
-- Then the error message appears for her.
When she closes the page, the index.html.LCK page disappears,
but the index.html.new sticks around.
Interestingly, the .new file is 0k.
We turned on I/O logging, but all it does is confirm that the
PUT isn't happening. However, there are lots of complaints about
missing files on the local drive. They run Active Directory on
their network, and I'm curious if there could be some kind of
mapping problem with their user settings directories, and
Contribute is getting hung up when it tries to PUT the changes.
I'd appreciate any help troubleshooting this issue or any
tips before I call Adobe. :)
Thanks!

Similar Messages

I use sites with pdf's a lot. Why isn't pdf viewing built into Firefox? The extensions can't keep up with your rapid upgrade program.

I use sites with pdf's a lot. Why isn't pdf viewing built into Firefox? The extensions can't keep up with your rapid upgrade program.

Thank you for your post. This forum is for Sony Consumer and Vaio products - for gaming questions and discussions there is a separate PlayStation forum:
http://community.us.playstation.com

How can i install shockwave with auto updates disabled?

how can i install shockwave with auto updates disabled?
i need to push out shockwave to all our machines and i need to have autoupdates disabled? whats the trick?

I ran with native io enabled and now i need to see how things happen with native io disabled.I am trying to understand the various aspects of the server.
Can you help me? How to set the default queue and application specific queues , and oofcourse socket readers in the case native performance packs are not used?
Please, I will be very grateful.

Why is it so hard for Firefox to keep up with "Snagit" update releases? The problem is in the scrolling capture (that hardly ever works) because FF is never able to keep up with any of their upgrades (or is that vice-verse?)

One of the more predominant features/capabilities of "Snagit''
(screen capture) software is its ability to perform scrolling captures. Unfortunately, with every update release (from Snagit) it takes Firefox at least two updates to capture the code to allow this function... to function!?
Under normal conditions, it is understood that one should logically take this to the software manufacturer to accommodate the browser (Firefox), however, the (always) fix to the problem is in waiting for Firefox to release one of its later updates... it has never been while waiting for Snagit to revise a fix.

You have it backwards, SnagIt needs to be compatible with Firefox.

Client can't edit site with Contribute CS3

I put a site online last week (www.dunelakeslodge.co.nz) and
supplied my
client with Contribute CS3 to update it, supplying her a
connection key.
She is connecting OK, but when she tries to edit a page she
gets a
message saying she "can't edit this page because Dave Addison
(that's
me) is already editing it. Please contact blah, blah...".
I have connected to the site myself with Contribute 3, and
got a similar
error: "you can't edit this site because you are already
editing it on
another computer"!!
It gave me the option to "unlock" the page, which I selected,
and I was
then able to edit the page. However, my client still can't.
Anyone got a solution to this?
thanks
Dave

I'm sure someone here will be able to help, but just curious
if you've tried
posting in the Contribute forum at all?
Take care,
Shane H
[email protected]
http://www.avenuedesigners.com
=============================================
Blog:
http://avenuedesigners.com/blog/
Web dev articles, photography, and more:
http://sourtea.com
=============================================
Proud GAWDS member
http://www.gawds.org/showmember.php?memberid=1495
Delivering accessible websites to all ...
=============================================
"Dave Addison" <[email protected]> wrote in
message
news:[email protected]..
>I put a site online last week (www.dunelakeslodge.co.nz)
and supplied my
>client with Contribute CS3 to update it, supplying her a
connection key.
>
> She is connecting OK, but when she tries to edit a page
she gets a message
> saying she "can't edit this page because Dave Addison
(that's me) is
> already editing it. Please contact blah, blah...".
>
> I have connected to the site myself with Contribute 3,
and got a similar
> error: "you can't edit this site because you are already
editing it on
> another computer"!!
>
> It gave me the option to "unlock" the page, which I
selected, and I was
> then able to edit the page. However, my client still
can't.
>
> Anyone got a solution to this?
>
> thanks
> Dave
>

HT4864 Mail client can't send mail with @me and @icloud

Why my mail account @icloud or @me don't work well with my mai client (windows live mail 2012)? I've setted the right parameters, but i can only recive the email, when i try to send it the account don't work! I've setted the mail client with this parameters:
IMAP (Incoming Mail Server) information:
Server name: imap.mail.me.com
SSL Required: Yes
Port: 993
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
SMTP (outgoing mail server) information:
Server name: smtp.mail.me.com
SSL Required: Yes
Port: 587
SMTP Authentication Required: Yes
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password

The following link may provide help...
http://apple.stackexchange.com/questions/35350/how-can-i-add-my-icloud-email-acc ount-in-windows-live-mail

Client can't publish files with 4.0

I'll first start by saying that my client has been happily
editing and publishing files since February. Recently, she was on
vacation so I made a couple of minor updates using Dreamweaver. Now
she's back, and is no longer able to publish. I'm not sure it's
related. The error message is:
"Contribute encountered a network or file system error.
Please try the operation again, and contact the administrator if
the error continues to occur."
The problem started yesterday, but briefly corrected itself.
Now she can't publish at all. I have asked her to go step-by-step
through the process of editing files and I can see the following
activity on the server:
-- She opens the file (index.html) and the following file
appears on the server: index.html.LCK
-- She hits "publish" and the following file appears on the
server: index.html.new
-- Then the error message appears for her.
When she closes the page, the index.html.LCK page disappears,
but the index.html.new sticks around.
Interestingly, the .new file is 0k.
We turned on I/O logging, but all it does is confirm that the
PUT isn't happening. However, there are lots of complaints about
missing files on the local drive. They run Active Directory on
their network, and I'm curious if there could be some kind of
mapping problem with their user settings directories, and
Contribute is getting hung up when it tries to PUT the changes.
I'd appreciate any help troubleshooting this issue or any
tips before I call Adobe. :)
Thanks!

I am also facing tghe same problem today. I cannot believe I
was unable to find a single help on this. i've been trying many of
the options but things are getting worse and worse. Now I can't
publish from Dreamweaver and Contribute also!! Why Adobe doesn't
support the ones who upgrade their software?
quote:
Originally posted by:
akaijen07
I'll first start by saying that my client has been happily
editing and publishing files since February. Recently, she was on
vacation so I made a couple of minor updates using Dreamweaver. Now
she's back, and is no longer able to publish. I'm not sure it's
related. The error message is:
"Contribute encountered a network or file system error.
Please try the operation again, and contact the administrator if
the error continues to occur."
The problem started yesterday, but briefly corrected itself.
Now she can't publish at all. I have asked her to go step-by-step
through the process of editing files and I can see the following
activity on the server:
-- She opens the file (index.html) and the following file
appears on the server: index.html.LCK
-- She hits "publish" and the following file appears on the
server: index.html.new
-- Then the error message appears for her.
When she closes the page, the index.html.LCK page disappears,
but the index.html.new sticks around.
Interestingly, the .new file is 0k.
We turned on I/O logging, but all it does is confirm that the
PUT isn't happening. However, there are lots of complaints about
missing files on the local drive. They run Active Directory on
their network, and I'm curious if there could be some kind of
mapping problem with their user settings directories, and
Contribute is getting hung up when it tries to PUT the changes.
I'd appreciate any help troubleshooting this issue or any
tips before I call Adobe. :)
Thanks!

Computer can't keep up with my typing, very slow to respond

I've been noticing lately that I the computer has been dropping characters as I type. In other words, the words do not appear on the monitor as fast as I can type the characters and I'm certainly no speed typist. Sometimes, the cursor just stops moving even though I'm still typing and then when it starts moving again, it's missed several letters that I've typed. Or, I'll press a few keys and nothing shows up for a few seconds and then the last few keypresses pop up. I thought it was related to upgrading to 10.4.5, but I returned to using the back-up disk with 10.4.4 and it's still happening. Only other new item is a DSL modem, but don't know how that would slow down the whole system. Would appreciate troubleshooting suggestions on how to narrow down the cause!
1 GHz PowerPC G4 Mac OS X (10.4.4) 1.62 GB SDRAM

Have you installed any unusual fonts? Have you
verified your fonts with FontBook (File > Validate
Font)? I guess those things could slow down your
typing.
I haven't installed any fonts, unusual or otherwise, since this problem began.
Have you checked in the Activity Monitor for
processes that take up a lot of processor power?
I did check in the Activity Monitor for processor hogs. After checking a link "Mac OS X: What are all those processes" I quit two processes that took up a lot of power and that seems to have helped quite a bit. I just don't know what those processes where, what started them, or how to keep them from coming back.

Poor Pathetic Safari :( can't keep up with the big boys

Safari is the most pathetic product Apple has to offer. not only is the slow to load, but it can't seem to stop crashing. If your going to use a cloud based system that all your products can interactively communicate and utilize the common data, wouldn't you want to ensure the one product that is the hub of all things on the web was perfected and not so tempermental? get it together, this product has been such a problem. Surely there are people over in Apple land that know how to get it to function like the big boys.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Boot in safe mode and log in to the account with the problem. First, disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable, and remove all aftermarket expansion cards. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including your login items.
Launch the application(s) and test. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.)

Can't Keep up with Typing

Second attempt at this: the forum site keeps intermittently
saying it's unavailable after I "Post Message" ...
In Buzzword, typing backspace (on a line with some text on it
already) followed immediately by typing a non-backspace character
nearly always "drops" (i.e. doesn't "see") the character typed
after the backspace.

What browser are you using, and what version?
What operating system are you running, and do you have all
the latest updates?
What version of Flash are you using?
I tested using IE 6 and Firefox 3.0.1 and have the latest
Flash and found no problems using backspace. Is this something
you've been able to do without problems in the past, and if so what
is new since you last were able to do this?
As for getting the unavailable message after posting,
clearing your cache may resolve that issue when it occurs.

Hi After being created a new session by our IT department on network Adobe Bridge seem to have lost its link to photoshop in the tool menu. We can't keep on with our usual process to convert picture in Grey ... Could you help us on this ? thanks in advanc

Hi All,
I've just been hired in a new editing company where we are producing pictures in black and white to illustrate our book.
The previous person that was occupying this position could manage the pictures workflow through bridge using a script that was in the Tools menu and use to select several picture and send them to photoshop to apply and converting script (black and white convesion).
The problem I encounter on my session is that I can't send picture to this photoshop script using Bridge ... Can someone help me on this ?
Thanks in advance.
Best regards

''the-edmeister [[#answer-666854|said]]''
<blockquote>
'''''"I created a second profile called Shopping. I imported the extensions from my default profile into it."'''''
If you used Sync to do that "import", disable Sync for at least one of those Profiles.
</blockquote>
Thank you for your suggestion. I have Sync enabled for all the profiles. To my surprise, however, Sync was of no use in getting Default's extension collection into Shopping. For that I had to resort to the article http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox.
I will try disabling Sync on Shopping.

ITunes keeps crashing with latest update when I try to sync my iPad and iPhone. No issues syncing my ATV's. Any suggestions?

In fact, when I am in iTunes and click on either my iPad or IPhone it shows the sync options and ten within 10 or so seconds iTunes gets the "closed unexpectedly" error message. Very frustrating....updated to latest iTunes version yesterday, and this issue started today. Thanks in advance for your ideas.

bristles wrote:
... the version I'm on is 10.5.8.
If possible... you need to Upgrade to Snow Leopard = OS X 10.6.x (which will Run iTunes Version 11)
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Other countries...
http://support.apple.com/kb/HE57
After the Successful Install, run Software Update to get the latest updates for Snow Leopard and iTunes.
Be sure to make a Backup of your Current System Before Upgrading...
NOTE:
You should also consider more RAM... Get the Maximum you can for your Mac...
It is important to get the Correct and Matching RAM
See Here > OWC RAM > http://www.macsales.com
The above site also has videos on how to Install RAM should you need it...

Can't open apps with new update!!!!

I downloaded the new update as i have a ipod touch 2G! i have it on my ipod now however i am unable use any of the apps apart from the mail, safari etc that are standard!! what am i to do???

app crashing is very common.
1) try downloading another app (any app) - sounds daft but it has worked in the past
2) try a reset as listed: http://www.apple.com/support/ipodtouch/troubleshooting/

Can this be done with one update statement?

update test_tbl
set clob_col = replace(clob_col,str1,'')
where str1 is not null
and update_flag = 'F';
update test_tbl
set clob_col = replace(clob_col,str2,'')
where str2 is not null
and update_flag = 'F';
update test_tbl
set clob_col = replace(clob_col,str3,'')
where str3 is not null
and update_flag = 'F';
update test_tbl
set clob_col = replace(clob_col,str4,'')
where str4 is not null
and update_flag = 'F';
commit;

Hi,
As stated in previous reply:
REPLACE ( char , search_string, replacement_string)
If search_string is null then char (the original) string will be returned.
This means you do not have to check on the search_string being null.
You may want to add to the where clause is any of the str1 .. str4 is not null.
update test_tbl
set
clob_col = replace(
                    replace(
                            replace(
                                    replace(clob_col
                                    ,str1,'')
                           ,str2,'')
                  ,str3,'')
            ,str1,'')
where
update_flag = 'F'
and str1 || str2 || str3 || str4       is not null    -- select only one of these
and COALESCE (str1, str2, str3, str4 ) is not null    -- select only one of these
commit;Regards,
Peter

Incompatible iOS 8 apps updating on my iPhone 4 that only supports iOS7. How can I keep the correct Apps?

My iPhone 4 is running iOS7. When updating the apps they change to the latest version (8), not supported by my OS. Where are the iOS7 compatible versions? Why can't we keep versions that work? There should be a way that iTunes does not allow updates if there are compatibility issues.
My device functions ok, so there is no need to update and financially I can not consider a change at the present time.
(I am hoping other angry users having same issue, so we can unite, rant and create enough publicity to force Apple's hand. Power to the People! =D)

animcreate wrote:
Ranting is always good... gets it out of the system =)
I understand what your saying... all apps are saved to my library. When I click on update however, it just updates the app with no consideration of compatibility. Yes, they're third party. iTunes however is not.
Apple does have control of iTunes, so theoretically could write simple code to determine version numbers and compatibility. It could then simply stop the updates that write over apps in the library. (It may be that the previous versions still reside on my system... I would love to know how to find them if they do...).
By allowing 'no control', it then means that devices that are older will not be able to run functional apps. That is counter productive from a consumer base that can not keep up with the latest 'of everything'.
Thanks for the reply.
That works if your only device is an iPhone 4 and you never plan on adding a newer device. However, I sync 5 devices with iTunes on my computer. I certainly want the latest version of apps for the devices that support it.
You have the option of restoring an older version to the iTunes library from a backup (if you back up your computer regularly). With a Mac and Time Machine it's just a couple of clicks. Also, it's worth knowing that when iTunes updates an app it deletes the old version to trash (or recycle bin), so you can recover it from there up to the time you empty trash/recycle bin.

Blazeds client can't keep up with realtime updates = discard?

Similar Messages

Maybe you are looking for