Block Production Order Creation for Particular Order Type

Hi Experts,
I want to disable the production order creation for a particular order type XX01 however there are some existing orders for this order type which should be processed further.
In other words my objective is to -
1. Block new Production order XX01 creation -
2. Processing of order type XX01 should be possible.
Is there standard setting available to achieve this or user exist is the only option..
Regards,

Hi
You can use the user exit PPCO0006 and its function mdoule EXIT_SAPLCOZF_003 to archive that. That function module is called when the user click enter after inputting the material/plant/order type in CO01 then you just need to check the imported value CAUFVD_IMP-AUART which contains the inputted order type then rasise an error message to tell user that the order type cannot be used due to certain reason. The source code need to be written there is very simple.
Regards.
Leon.

Similar Messages

How to exclude "Blocked for Purchase" error message in PO creation for particular Order Type

In Article master some times we used to set Site-Specific Article Status = '01'. (MARC-MMSTA)
01
Blocked for Purchase
02
Blocked for Purchase/Sale
My requirement is that when Creating PO in ME21N for a particular Order Type (Purchasing). This check need to be removed.
Now if we try creating the PO we will be getting the below error message.
Status "Blocked for Purchase" of article XXXXXX does not allow external procurement.
Is there any exit or BADI where i can put logic to remove this check.

Hi ,
You can use BADI ME_PROCESS_PO_CUST or customer exist EXIT_SAPMM06E_013
Regards,
Pravin

Planned Order creation for Sales Order and Purchase Order

Hi
We have a following requirement.
In normal scenario when we have demand for material which was created by MD61 and in addition to that if there is Sales Order the 1st planned order gets revised.To better expalin this consider possible scenario
You create plan via MD61 for 200 qty .The system creates Planned Order for 200.
Now there is Sales Order for 150 peices.Then what happens is original Planed Order of 200 is changed to 50 and another planned order is created for 150 peices.The requirement is not summed.
Now in new scenario instead of Sales Order there is Intercompany Purchase Order of 150 peices.
Now the system is not changing original Planned Order of 200,but it created another planned order of 150.So now there are 2 Planned Orders of 150 and 200.
What I want to know is there any way wherein the system will reduce the original planned order (similar to Sales Order scenario)
Regards

Hi,
Use Strategy 52 in urs case.
PIR witll be created .
None convertable planned order will be created.
Once you get sales order for that material.
New planned order will be created which will consume PIR( planned order ).
Eg.
PIR 10.
Planned order 10 qty.
Sales oder 6
Planned order for SO 6 qty
Planned order through pir will become 4 qty.
Regards,
Vishal

Restricting Material for particular Order type

Dear Guru's,
Is it possible to restrict particular material for particular order type in CO01.
E.g. Material A is used in CO01 for order type X
Material B is used in CO01 for order type Y
I want to restrict CO01 should not allow production order creation of material A with order type Y.
Regards
Chandan.

Hy,
By the use of production scheduling profile you can set default order type for the required materials.But it doesn't restrict the other order type. During the manual order creation if user has select other order type then , there is no restriction.So as Mr. Shiva said put restriction over manual order creation, if possible.other option may be by using User Exit.
Now in your case you want to restrict materials not material type. So it is quite complicated for Abaper to write code , because the for every new material Abaper has to change code.
So there is one option by grouping perticuller materials under one production scheduler and then it is more convient for Abaper to create code for User Exit.
Pls refer below thread which may give some more inputs for your requirments.
[Ugent: How to restrict a Material Type for a Specific Process Order Type;
Regards,
Dhaval

Block PO if net price above 50K for Particular PO type

Hi SAP gurus,
My user required to block PO if the net price is above 50K for particular PO Type.
the situation is like this ;-
PO Type : ZNR
This PO type got two condition of release,
1 - if PO below 10K, only 1 person need to release this PO
2 - if PO between 10K till 50K, need 2 person to release this PO
if PO exceed 50K, the user cannot create the PO.
do i need to customize my user exit ? if need to customize my user exit what is the program code ?

Hello,
PO blocking is at line level. You can block a PO line using method PROCESS_ITEM of BADI ME_PROCESS_PO_CUST based on your conditions (Document type and Net Value of the Order).
Thanks,
Venu

Restricting Sales Order Creation for Customers with specific AccountGroup

Hi
We have 2 Accont Groups for Customers namely Actual & Prospective.
We wish to allow Enquiry / Quotation and Order creation for customers with Account Group ACTUAL and wish to allow only Enquiry and Quotation creation for customers with Account Group as Prospective.Is there anyway i can apply Sales Order creation block on an ACCOUNT GROUP on whole and not on Individual customers...
Regards
Sanjeev Bagaria

Hello
I did this through Listing Inclusion / Exclusion.
(1) We created a new Customer Group 99 for Prospective Customer
(2) We then created a new Condition table xxx with Customer Group & Material Type(as footer)
(3) We then created this new Access Sequence Customer Group / Material Type to Exclusion Procedure B00001
(4) We then assign the Exclusion Type B00001 to Sales Documents ZDOM & ZEOR our Order Sales Documetn Types
(5) And finally we created a record for Exclusion with 99 Customer Group and Material Type as FERT..
This now restricts creation of Sales Orders for all my Prospective Customers provided Customer Group is maintained in Customer Master. We are now also able to make Enquiry / Quotation and Sample Sales Order for Prospective Customers sicne we have Different Sales Document Types for all these and have assigned Exclusion only to normal Sales Order Document Type.
Thanks a lot for all the suggestions provided.
Regards
Sanjeev

TCODE for Process order creation against Sales order

Hi gurus,
Pls tell me what is the TCODE for Process order creation against Sales order
Eg. CO07 is for production order from sales orde

Typically, in MTO scenario after the sales order is created you run MRP which will create planned order and then you convert that into production order using MD04.
Or if you have SD settings correctly directly from the release of Sales Order it will create planned order or production order.
please check and revert back.

There's an error while delivery note creation for STO order

There's an error while delivery note creation for STO order even stock available in unrestricted stock
Edited by: sharma aman on Nov 8, 2011 9:00 AM

Dear Sharma Aman,
Check whether the following link helps you.
Mesaage : while creation of delivery : An item with no delivery quantity .)
Please search in google with the error message and definitely you will get some older posts in SDN which is solved.
In that case , you need not wait for the solution as it is already available.
If the solution provided do not suit you, then post it in SDN so that it will be a learning for others.
Try to search in the forum or in google before posting further queries
Thanks & Regards,
Hegal K Charles

Unable to reduce previous year budget value for particular order

Hi
I am unable to reduce previous year budget value for particular order number in IM52 - process transactions - Returns
The error msg is Overall budget less than cumulative budget
Pls help to solve this issue.
Regards
P Karthikeyan

Hi,
Check the budget distrubuted to the internal orders values is matching with top node or parent node value or not, if that value is not matching with intenal order distrubution value then system will not accept to save.

Dump during sales order creation for a config material (uding order BOM)

Dear all,
I am getting the following error during sales order creation for a configurable material
When I click on 'Engineering' tab in the characteristics value assignment for the parent material i.e. sales order material I get dump with following message,
'Field symbol has not yet been assigned'
Thanks,
Yogesh

Yogesh,
what was the problem ?
Thanks,
Pavan Verma
Edited by: Pavan Verma on May 11, 2010 9:31 AM

Table to find sales order created for a transaction type.

Hello all
I have a requirement that i need to check all the orders created for a transaction type and to find out how many of them are active now and how many of them are deleted.
i know only the transaction type and based on this input i need to know the above details is there any report or table for this.
Thanks and Regards
shanto aloor

Hello shanto aloor,
in the database table CRMD_ORDERADM_H you can search by transaction type. In Se16 you can enter the process_type to find the related transactions. If you have the header GUID you can use also the report (SE38) CRM_ORDER_READ to get more details of the transaction.
Hopefully this information will help you to meet your requirement.
regards
Rene

In which table,i could find order quantity for sales order..??

In which table, i could find order quantity for sales order..??
and also in which table i could find delivery for sales order..
need help..??
Moderator message: please search.
Edited by: Thomas Zloch on Feb 23, 2012

Check the table AUFM.
Give the order number in AUFNR.
For movement type 261 (GI) & 101 (GR), you can get the material document number (MBLNR), Material (MATNR), Qty (MENGE) & UoM (MEINS).

Service group for particular document type or Purchase Organisation

Dear Gurus,
I want to add service group as like Material group. but my objective is to restrict those service group for particular document type or Purchase Organisation??
Is it possible, if so please advice me the SPRO Settings
Thanks
RS

Hi,
Basically, this task (both customized table activation via SE11 transaction and user exit activation via SE37 transaction) will be done by ABAPer. All you should do is to prepare the functional specs document in which you require -
1)   A generation and activation of the customized table which consists of at least four columns -
     a)   Purchasing Organization;
     b)   Purchasing Document Type;
     c)   Material group/service group
     d)   Purchasing Document Creation Date
2)   A coding and activation of the related function module (You can use SMOD transaction to view the enhancement MM06E005 to view related user exit).
Cheers,
HT

How to get the back order quantity for sales Order

Hi Friends,
I want to get the back order quantity for sales order . in MD04 t-code,
there is a field(MDEZ-MNG01) for Received Qty/ Required qty. But MDEZ is a structure.
I tried from MDTB table, but the table is not updated with the values in MD04.
Please guide me from which table I can get the back order Qty for sales Order
(ref: t-code MD04, MRP element = CusOrd).
Thanks,
Sagar

>
VIdya Sagar wrote:
> Hi,
>
> Isn't there any difference b/n Open Sales Order and Back order??
Yes Quite Difference.
Read:
http://www.sap-img.com/sap-sd/explain-the-meaning-of-an-open-sales-order.htm
http://help.sap.com/saphelp_sbo2005asp1/helpdata/en/b6/bdb9b2f02842348c9edbe78af863c4/content.htm

How to control change request creation for particular IBase Component?

Dear Experts,
Can anybody suggest , how to control change request creation for particular IBase Component?
We have implemented ChaRM which is integrated with SAP ECC & SAP BI.
ChaRM is not integrated with SAP Solution Manager.
End Users are creating support notifications from -Help Menu- Create Support Notification.
The IBase Component is not editable once notification is created. This Ibase is copied to change request when the action-create change document is saved.
Requirement is that, during creation of change document, system should check the IBase component of support notification. If the IBase is related to solution manager system, system should restirct the change request creation.
Kindly suggest how to achieve this.
Regards
Vivek

Hello Vivek,
The way to do what you want is to create a schedule condition for action Create Change Document. The action has to be displayed only when the IBase/Component value differs from SolMan. To add the IBase/Component value to the container so that it can be evaluated during runtime, you will have to create a subtype of BUS2000116 on which condition can be buit.
See the following posts for more information :
Hope this helps,
BR.
Stéphane.

Block Production Order Creation for Particular Order Type

Similar Messages

Maybe you are looking for