Blocking a Price Condition

Dear All,
Can anybody suggest me if there can be a tcode to block or inactivate a pricing condition.
Rgds,
Indrajit

Hi Indrajit
There is no t.code to block the pricing conditon.
Assuming it is a item conditon type and maintained a condition record also . So instead of removing the access sequence from the condition type assign a requirement in the access sequence So that the condition type becomes inactive .
Secondly , assign a wrong Reqt for that condition type in the pricing procedure, so that if that requirement is not met then that condition type becomes inactive
Regards
Srinath

Similar Messages

  • How to block post price conditions in purchase order

    I need to block post price conditions in the purchase order, after doing MIGO.
    The problem is that somtimes buyers people go to the purachse order with ME22N, even if MIGO has already been made for this purachse order. They change The amount of certain price conditions in some or all the posts of the purchase. when people of accounting receive the invoice, there are problems of price differences.
    i need help to do it
    Thank you in advance for your help

    The system will not allow to change the price once goods receipt takes place on that particular order.  It happens only when we reverse the reciepts and make the po open.  In such case the persons can change with ME22N.  Its simple that only authorised user to have this transaction code and other users should not have this transaction code authorization.

  • How to block post price conditions  in purchase order after doing MIGO

    I need to block post price conditions in the purchase order, after doing MIGO.
    The problem is that somtimes buyers people go to the purachse order with ME22N, even if MIGO has already been made for this purachse order. They change The amount of certain price conditions in some or all the posts of the purchase. when people of accounting receive the invoice, there are problems of price differences.
    i need help to do it
    Thank you in advance for your help

    The system will not allow to change the price once goods receipt takes place on that particular order.  It happens only when we reverse the reciepts and make the po open.  In such case the persons can change with ME22N.  Its simple that only authorised user to have this transaction code and other users should not have this transaction code authorization.

  • Manage two invoice posting for one price condition in sales document

    Hello Experts,
    I am a new user in SD module especially for billing and pricing part, and i have a specific requirement from my client that i cannot find the solution. Could you please help if you have any idea to resolve the following situation:
    I have a plant in UK which create a sales order for a customer X for a material M with a specific amount.
    For the invooice creation, the goal is to create two invoices:
    - One with net value billed in USD,
    - one with GBP to bill the tax.
    I tried to use billing plan, and i was able to generate the 1st invoice without tax through pricing procedure that don't manage Tax condition, however i am blocked when trying to generate the second invoice that contains only the tax.
    Do you have any idea how can it be managed?
    Thanks for help
    I can add more clarification if needed.
    Thanks

    Hello,
    Thanks for feedback.
    In fact the Customer master data currency is USD, and company code is in UK so it is GPB.
    The target is for some business case the customer is invoiced with Net value in USD, and the tax will be invoiced in GBP.
    But the problem is that i cannot manage two currencies and two invoices for one price condition.
    So I am wondering what is the best solution, How i can generate two output types for the same price condition.
    I tried to set up pricing procedure without tax, to manage the Net value, in first line of the billing plan.
    But i am not able to generate a seconde line with only the tax condition.
    DO you think that is possible?
    Thanks

  • Block PO Price after GR

    Hi guys,
    I have a problem with PO mechanism. Is there any configuration available to lock/block the price in PO so that user can't reenter the PO's new price? The requirement from my client is, they want to give a warning when we try to change the PO after GR process
    Regards

    HI
    there is no stander configuration to achieve this you can achieve this bt user exit or badi ME_PROCESS_PO_CUST, method OPEN.
    But before applying this think twice really you required this functionality ,for one condition you requierd and for other condition you may not required means you have to change Po price
    check following link it will help you ABAp consultant help you for same 
    [Block PO from changes after GR;
    and check this sap note also
    OSS note 457511
    Regards
    Kailas Ugale
    Edited by: kailasugale on Dec 9, 2011 9:18 AM

  • Price condition equal to VPRS cost of goods

    I have a senario ,which we will create sales orders for customers with sales price equals to the MAP(moving average price) at the  time when the SO being input .And the sales price in sales orders should be copy to the billing whether  the MAP has changed or not .
    Now I have set up an pricing procedure ,which  use  VPRS  as the sales price condition type ,but here comes another question when I create billing according to the delivery . When I create the billing document ,the net value is defferent with the net value of the sales order ,because the MAP has changed during the goods issue.
    Is there any idea that can make sure the sale price equals to the MAP , and the billing net value is same as sales order net value?
    can you give me some advice ? thanks for you help！

    Hi,
    The pricing type (Copy control)  is an extremely important field. It is worthwhile keeping this entry
    in mind when creating your pricing condition types. As a rule of thumb, you should
    have all item categories for a particular sales document with the same settings.
    Generally, you may use pricing type B (carry out new pricing), G (copy pricing
    elements unchanged and redetermine taxes), or C (copy manual pricing elements
    and redetermine the others).
    When using condition B all manual pricing condition types are lost.
    If you want to copy the sales order to the invoice without changing the sales order
    conditions, use pricing rule G. This will copy the pricing conditions from the order into the
    invoice without changing them, but will redetermine the taxes.
    Regards...
    SBC

  • How to update multiple Price conditions in FM CRM_ORDER_MAINTAIN

    Hi All,
          need to update multiple price conditions in a contract Thru FM CRM_ORDER_MAINTAIN.
    please see the piece of code that am using...
      am able to update single price condition...but not able to populate 2 or more .......i,e..ADD A Condition
    i,e...DATA : ls_cond TYPE prct_cond_external_input,
           lt_cond TYPE prct_cond_external_input_t.
    DATA : ls_con TYPE PRCT_COND_DU,
           lt_con TYPE PRCT_COND_DU_TAB.
    Create Condition Type
    *ls_con-KNUMV = lv_header_guid.
    *ls_con-KPOSN = lv_item_guid.
    ls_con-stunr  = '134'.
    IF Y EQ 1.
      ls_con-ZAEHK = '001'.
    ELSE.
       ls_con-ZAEHK = '002'.
    *ENDIF.
    *ls_con-kschl = 'ZFP1'.
    **ls_cond-waers = 'CNY'.
    *ls_con-kbetr = '0.00'.
    *ls_con-kpein = '1'.
    ls_cond-kschl = 'ZFP1'.
    ls_cond-waers = 'CNY'.
    ls_cond-kbetr = '0'.
    ls_cond-kpein = '1'.
    ls_cond-knumh = lv_item_guid .
    CLEAR ls_Price_doc.
    ls_Price_doc-ref_guid = lv_item_guid.
    ls_Price_doc-ref_kind = 'A'.
    IF Y EQ 1.
    ls_Price_doc-ref_handle = '000000001'.
    ELSE.
      ls_Price_doc-ref_handle = '000000002'.
    ENDIF.
    *ls_price_doc-PRIC_COND[] = lt_cond[].
    *INSERT ls_con into table ls_price_doc-PRIC_COND.
    INSERT ls_cond into table ls_price_doc-COND_ADD.
    INSERT ls_price_doc INTO TABLE lt_price_doc.
    ls_input_fields-ref_guid    = lv_item_guid.
    ls_input_field_names-fieldname = 'KNUMH'.
    INSERT ls_input_fields INTO TABLE lt_input_fields.
    ls_input_field_names-fieldname = 'KPOSN'.
    INSERT ls_input_fields INTO TABLE lt_input_fields.
    ls_input_field_names-fieldname = 'KSCHL'.
    INSERT ls_input_fields INTO TABLE lt_input_fields.
    ls_input_field_names-fieldname = 'KPEIN'.
    INSERT ls_input_fields INTO TABLE lt_input_fields.
    ls_input_field_names-fieldname = 'STUNR'.
    INSERT ls_input_fields INTO TABLE lt_input_fields.
    ls_input_field_names-fieldname = 'ZAEHK'.
    INSERT ls_input_fields INTO TABLE lt_input_fields.
    ls_input_field_names-fieldname = 'WAERS'.
    INSERT ls_input_fields INTO TABLE lt_input_fields.
    ls_input_field_names-fieldname = 'KBETR'.
    INSERT ls_input_fields INTO TABLE lt_input_fields.
    CLEAR ls_input_fields.
    Ls_input_fields-ref_guid    = lv_item_guid.
    ls_input_fields-ref_kind    = 'B'.
    ls_input_fields-objectname  = 'PRIDOC'.
    *ls_input_fields-logical_key = '0001'.
    ls_input_fields-field_names = lt_input_field_names.
    INSERT ls_input_fields INTO TABLE lt_input_fields.
    CLEAR ls_input_fields.
    CLEAR ls_Price_agreement.
    Clear ls_cond.
    I kept this under code. loop, for item records.....
    Though the internal table lt_price_doc. is holding all the records, it is updating only one record. can you any one pls guide me ,

    This example works fine for me. Modify it according to your needs...
    Price
                  IF it_item-value IS NOT INITIAL.
                    ls_cond-kschl = 'PR00'. " add price
                    ls_cond-kbetr = it_item-value.
                    ls_cond-waers = st_head-currency.
                    INSERT ls_cond INTO TABLE ls_pridoc_com-cond_add.   
                    index_2 = 1.
                    CLEAR: ls_cond.
                  ENDIF.
    Discount
                  IF it_item-discount IS NOT INITIAL.
                    ls_cond-kschl = 'ZPPP'. " add discount
                    wa_procent_calc = it_item-discount * 10.
                    ls_cond-kbetr = wa_procent_calc."it_item-discount.
                    ls_cond-waers = '%'."st_head-currency.
                    INSERT ls_cond INTO TABLE ls_pridoc_com-cond_add.   
                    index_2 = 1.
                    CLEAR: ls_cond, wa_procent_calc.
                  ENDIF.
                  IF index_2 = 1.
                    ls_pridoc_com-ref_handle = counter.
                    ls_pridoc_com-ref_kind = 'B'.
                    INSERT ls_pridoc_com INTO TABLE gt_pridoc_com.
                    CLEAR: index_2,ls_pridoc_com.
                  ENDIF.

  • Report to check price condition

    Hi All,
    Is it possible to check existing price conditions on all customers to make sure we have a valid price (i.e no ZERO price) in any condition, any report or fuction to help me do the above.
    Thanks in advance.

    Try pricing report V/LD. Copy the output to excel and customer masters to excel and then do a  V Lookup in excel.
    Regards,
    GSL.

  • Price conditions on Sales Orders via EDI

    Hi,
    I need to know if there is a way to bring prices over on the IDOC while posting a sales order via EDI. I have a situation where the price does not have to be determined based on condition records setup within SAP but rather update the price sent on the IDOC itself.
    Thanks
    MR

    Hi,
    Let the inbound Idoc have the price field and the price of the material. And keep the price condition type open/manual entry allowed. Once this is done the system will not do it from the condition record and will populate the data that is there in the Idoc.
    Hope this helps.
    Kind Regards
    Chakradhar

  • Price conditions from Info Record to PO

    Hi,
    While creating PO, Price conditions flow from Purch.info record.
    My requirement is => In the Item detail Conditions Tab, the price should not be available for editing (i.e.it should be in display mode) at end user level. If we need to modify the Amount against any condition it should be done only in info record only.
    How to address this requirement.
    Regards,
    Baskar

    Hi,
    1. Go to SPRO > MM > Purchasing > Authorization Management > Define Function Authorizations for Buyers > Function Authorizations: Purchase Order > Here "New Entries" and define Function Authorization Key as "01" and give description.
    OR use T. Code - OMET
    Here under "General parameters" subscreen,
    Activate "Display conditions" indicator and assign Field selection as "$DE1", do not select "Enter conditions"
    In "Possible ref. objects", select "W/o reference" otherwise reference documents (for e.g. PR, RFQ, etc...) for PO creation will become mandatory.
    2. Now go to SU01 > Enter User ID > Parameters Tab > Here for Parameter ID EFB i.e. Function Authorization: Purchase Order, maintain value "01" and check in PO field selection will get applied for that user.
    Now check in PO, Conditions will become in display mode.

  • How to avoid user from entering new price condition in return order

    Dear Expert
    We are facing a scenario where we make return order; the Price is copied from the invoice. And it is working perfectly. The system does not allow us to change the price.
    The issue we are facing here is that user can input new condition like discount /premium and change the net value for the return order pricing, and this will reflect in the credit note for returns.
    Is there a way to restrict the user from entering any pricing condition in the header or item conditions tab.
    although we cannot change the original price coming from invoice referenced for return order, but the user can input new price conditions as below. This must not be allowed.
    The price must come according to the Qty being referenced.
    While making the credit for returns, the user has a chance of further making changes to the net value by adding new conditions. Hence this must also be restricted for any changes.
    Thanks
    Edited by: Lakshmipathi on Jan 31, 2012 6:55 PM
    Thread Locked - Reason Cross Post

    okie .... i will tell briefly what is the problem ....
    Take a scenario wherein a user has logged into my application and he is performing a task which will put his user id and his employee id into the session. Then he opens another window by using either ctrl+n or through files->new window.
    So now a new browser will open but the session will be same ..... in this newly opened browser, user performs some operation which will remove the user id and employee id from the session .... Now if he again comes back to the first window and tries to do some operation, then a null pointer exception will be thrown saying that the employee id is null .... because he has deleted that in the newly created browser ..... to avoid this situation what can we do ???? can you please help me in this regard ??? you got my problem right !!!

  • Changing Price Conditions in Sales Order with SD_SALESDOCUMENT_CHANGE

    Hello there!
    I need to change the value of a price condition in a sale order ;I'm using the f.m.  SD_SALESDOCUMENT_CHANGE.
    It doesnt' work as I want, 'cause it creates an other price conditions instead of just changing the price value of the actual one.
    Waiting for your tips,
    thanks.
    This is how my code looks like:
    PARAMETER: p_vbeln LIKE vbak-vbeln.
    data: st_order_header_inx   TYPE  bapisdhd1x,
            st_conditions LIKE bapicond,
            st_conditionsx LIKE bapicondx,
            tb_conditions TYPE TABLE OF bapicond,
            tb_conditionsx TYPE TABLE OF bapicondx,
            tb_return TYPE TABLE  OF  bapiret2.
    st_order_header_inx-updateflag = 'U'.
      st_conditions-itm_number = '0010'.
      st_conditions-cond_type = 'PR00'.
      st_conditions-cond_updat = 'X'.
      st_conditions-cond_value = '100'. "Value I want to enter
      APPEND st_conditions TO tb_conditions.
    st_conditionsx-itm_number = '0010'.
      st_conditionsx-cond_type = 'PR00'.
      st_conditionsx-updateflag = 'U'.
      st_conditionsx-cond_value = 'X'.
      APPEND ls_conditionsx TO tb_conditionsx.
    CALL FUNCTION 'SD_SALESDOCUMENT_CHANGE'
        EXPORTING
        salesdocument                = p_vbeln
          order_header_inx          = st_order_header_inx
        TABLES
          return                           = tb_return
          conditions_in               = tb_conditions
          conditions_inx              = tb_conditionsx  .

    Get the conditions records first from the Sales Order with BAPI BAPISDORDER_GETDETAILEDLIST
    CALL FUNCTION 'BAPISDORDER_GETDETAILEDLIST'
      EXPORTING
        i_bapi_view          = lw_bapi_view
      TABLES
        sales_documents      = lt_order
        order_conditions_out = lt_conditions_out.
    Then populate the conditions internal table with the data that you get from the previous code
    move-corresponding lw_conditions_out to lw_order_conditions_in.
    lw_order_conditions_in-cond_value = '100'   " the value that you want to modify
    APPEND lw_order_conditions_in TO lt_order_conditions_in.
    CLEAR lw_order_conditions_inx.
    lw_order_conditions_inx-itm_number = lv_kposn.
    lw_order_conditions_inx-cond_st_no = lw_conditions_out-cond_st_no.
    lw_order_conditions_inx-cond_count = lw_conditions_out-cond_count.
    lw_order_conditions_inx-cond_type  = lw_conditions_out-cond_type.
    lw_order_conditions_inx-updateflag = 'U'.
    lw_order_conditions_inx-cond_value = lc_x.
    APPEND lw_order_conditions_inx TO lt_order_conditions_inx.
    You didn't populate the fields cond_st_no and -cond_count. Then just call BAPI SD_SALESDOCUMENT_CHANGE to change the Sales order.
    Hope that helps.
    Erwin

  • Price Condition Depending of Material Master Record

    Helllo Experts, I have an issue with a price condition on a price procedure  the user wants to be able to mantain the price condition manually only if the material used at item level of sales order is equal to one of 3 sku´s.
    This Price condition can not be mantained on VK12 because it´s calculated manually depending of several factors.
    For Example, let´s say the Material ID´s are  1122, 1123 and 1124 and the price condition is ZY01.
    If the Mateial ID used at item level of sales document, the manual condition ZY01 shouldn´t be shown to the user only if the material used is equal to 1122, 1123 or 1124
    To solve this issue I was thinking to use at price procedure the field requirement and use a pricing routine as  "2" Item with pricing and edit the routine. the Material used at item level of sales document
    I´m not quire sure this is going to work, And what´s the name of the field I should use to get that
    Any Suggestion how to adress this  issue is welcome.

    Hello, I create my own condition table to include material field, also a new access sequence has been created, to link this table on field material I only can specify one material number, I capture there my material for wich I want this price condition work, but when I create a Contract on VA41 using the material included on my price condition, I´m able to mantain the amount, but the same happen when I try to use another material number not included on my access sequence.

  • How to limit the number of price conditions in a sales order

    Dear experts,
    We've created discounts in our pricing procedure, and they are added manually. They have a maximum.
    But the problem is that the user can add several discount price conditions in the sales order!
    Is there any customizing to limit the number of occurrences to 1 in the pricing procedure?
    Thank you for your help
    Marjolaine

    HI,
    You can make use of feature to maintain maximum and minimum limits per condition type.
    SPRO > SAP Implementation Guide > Customer Relationship Management > Basic Functions > Pricing > Define Settings for Pricing > Create Minimum/Maximum Limits
    In this activity you can restrict manual processing of pricing conditions in transactions using minimum and maximum limits per condition type.
    Kindly reward with points in case helpful
    Sharif

  • ME22N change Exchange rate type at price condition level

    Hello,
    In ME22N exchange rate type is 'M' by default. When a price condition has currency different than purchase order this 'M' rate is used.
    Now I need to change this 'M' rate but for particular price conditions (and exchange rate type can be different for each price condition). Don't ask me why:-) This requirement comes from business consultant and he knows that there is no user exit for this. I need to modify standard. The problem concerns items price conditions.
    I'm not asking you for a complete solution, but maybe you can give me a hint where to start? What is the function module which perform price calculation (where exchange rate is used) in ME22N.
    I tried to change KOMK-KURST in price condition rule (the procedure which is called to check if price condition has to be calculated or not). It is called for each price condition and I know a name of price condition. But I think the exchange rate type is read at the beginning and stays unchanged even I changed KURST.
    I also found function module READ_EXCHANGE_RATE, which has rate type 'M' by default. I could put my modification in place where it is called. But it is not called when I press button Update price. It is only called when I change the currency of condition and press enter. This FM is called in few places in ME22N but not when I'm refreshing prices. Maybe during a refresh it has already an exchange rate? If so, READ_EXCHANGE_RATE could be a solution, but... It is not called when price conditions are created for the very first time (when I create PO item). Maybe system calls different FM?
    I also tried to use trace (ST05) to see where systems reads from TCURR, but I think some buffers are used and TCURR is not in trace.
    So now I'm stuck hoping for your help.
    Best regards
    Rafal

    Prabhu Peram wrote:
    Hello Rafal ,
    >
    > still im trying to understand your requirements , anyhow if you change/propose new exchange rate at header level , then system wont put type as 'M'.
    >
    The problem is that if I set a new exchange rate type, it will be the same for all price conditions. My requirement is to have different exchange rate type for each price condition. The pricing procedure will loop at each price condition, and depending on condition name I need to have different exchange rate type.
    Example:
    condition XMER is in EUR and must be converted to USD (factor should be 1,234)
    condition XMET is in EUR and must be converted to USD (factor should be 1,567)
    Now the factor is the same for all price conditions.
    I have found interesting table XKOMV. It contains price conditions and there is a field with factor value. Now I will look for the place where this table is filled with data or for the place where I can modify factor values before XKOMV is used in pricing procedure.
    Best regards
    Rafal

Maybe you are looking for