Blocking keyboard buttons STRG+ALT+DEL

Hi there,
is there some way in LabVIEW to filter a buttom that is pressed? I need to block the keys STRG+ALT+DEL (Windows task monitor), the VI must keep alway on top, but with this keys the user is able to close it............
Or is there some other way??
Thanks,
Sascha

_avr_ wrote:
Hi there, is
there some way in LabVIEW to filter a buttom that is pressed? I need to
block the keys STRG+ALT+DEL (Windows task monitor), the VI must keep
alway on top, but with this keys the user is able to close
it............ Or is there some other way??
This
functionality is part of the LabVIEW DSC Toolkit. But I believe to
remember that doing so has also a few sideeffects which might be not as
desirable.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Similar Messages

Revolve 810 G1 Unlock Computer when in Tablet Mode. Press CTRL-ALT-DEL or Windows Security Button

1. I have an Revolve 810 G1
Running Windows 7 Pro (64 Bit).
When I change the screen to Tablet Mode
(Folding tablet over keyboard and using as tablet).
I lock my computer.
2. What to know how to unlock without having to Open back up and use the CTL-Alt-DEL keys.
When Locked screen shows: Press CTRL-ALT-DEL or use the Windows Security Button to unlock this computer.
I would like to use the Windows Button on the bottom of the screen
(One Used in Windows 8 to change between Desktop and Metro) to Unlock screen And bring up on screen keyboard to put in my password.
This is probably how it should work, but it does not work.
Even bringing up the onscreen keyboard via the blue power button On the screen to Ease Of Access does not work.
The CLT-ALT-DEL on the on screen keyboard will not unlock the screen.
P.S.
Where is that Windows Security Button when you need it?
Thanks,
Rog

If you are using Windows 7 (not Windows 8), you should be able to touch the Ease of Access button at the lower left of the screen, then select Type without the keyboard (On-screen keyboard). When the on-screen keyboard pops-up, press CTRL, then ALT, then DEL. You should get a password prompt; the on-screen keyboard will stay visible unless and until you close it.
Although I am an HP employee, I am speaking for myself and not for HP.
Please click the little thumbs-up dealybopper to the lower right if my reply was helpful to you. Please mark Accept As Solution if it solves your problem. This will help others, too!

Possible to disable crtl+alt+del button on HP Slate 500?

Hello
I was wondering if it is even possible to disable the crtl+alt+del button on HP Slate 500? As my company has me reviewing the unit to be possibly used within our company but one of the requirements is to be able to lock the tablet down. And one of the things they want is to prevent people from being able to use the crtl+alt+del to access task manager since the plan is to lock windows to one open application. But I can't see any settings in the bios to disable that button. And there are no oblivious options I can find on the Slate and the button does not appear to be controlled by a priority HP software product. The only other way I could think of doing it would be to somehow disable it from the registry.?

This can be done using the Pro version or higher of windows 7, using gpedit and/or administrative templates you can control everything a user account can do or not do.
gpedit.msc in a run command opens the group policy editor
http://technet.microsoft.com/en-us/library/cc753298.aspx

Windows 7 Only Cancel Button at Clt+Alt+Del After 6500 Driver is Installed

Hi,
We have a fleet of X201 Tablet Laptops and We use the HP Officejet 6500 Printer.
As soon as version 14.00 of the driver is installed on these machines upon restart rather than a username to click onto to login at Clt+Alt+Del a cancel button is displayed.
The only work around we have found is to rebuild the laptop and then install an earlier version of the 6500 driver.
What is causing this and how do we fix it as some users are installing the latest driver themselfs and breaking the laptops.

The same thing is happening all over the hp forums. People are updating printer drivers and then the printer doesn't work. Or some functions are taken away. I have an hp 4280 printer and I'm still using the driver from when I first installed it. Every time hp wants to update, I say no. Mine still works perfect. There have been 4 updated drivers since my version.
It's not Lenovo and it's not your machine. It's hp's buggy drivers.
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Imitating 2 keyboard buttons at the same time like ALT+F4

hello,
was just wonderin how to Imitatate 2 keyboard buttons at the same time like ALT+F4. i am using the Robot class to make the key board pressing and they are working fo one button. i tried two buttons like this
robot.keyPress(KeyEvent.ALT_MASK+KeyEvent.VK_F4);but no luck. anyone know how to do this
thanks
martin

martinnaughton wrote:
sorry was just trying to do CTRL button but it does not like this bit of code.
robot.keyPress(KeyEvent.CTRL_DOWN_MASK);
robot.keyPress(KeyEvent.VK_UP);gives me an exception of invalid code.It does not seem to like DOWN_MASK attributes in java.
any way else around it
thanks
martinDon't confuse the modifier bitmask codes with the key codes:
robot.keyPress(KeyEvent.VK_CONTROL);

Button for block keyboard

I work on a Kids Program and i want to add a button for blocking keyboard. I search on Google and on Social.Microsoft but i don't see. Thanks!

O.K.
Why are you not posting your question in a forum that is about programming with Visual Studio?
Or programming in a specific language like VB.Net or C# .Net or C++?
You posted your question in a forum called "Project Server General Questions and Answers". You could've posted in any of hundreds of forums yet for some reason you decided to post in this forum for a question which has nothing to do with Project
Server.
Therefore try finding a Forum for posting your question in which would be a Forum for programming. And then explain that you want code for locking or unlocking the numeric keypad in a button click event.
After all this is not a Forum people would search for answers to questions on or post questions for code. It is a Forum people search for answers on questions about and post questions for Project Server.
What looks like it may contain an appropriate Forum for you to post your question in, in the image below?
La vida loca

Skype blocks keyboard shortcut ctrl+cmd+alt+arrow up

This is to continue the old and unresolved issue:http://community.skype.com/t5/Mac-archive/Skype-blocks-keyboard-shortcut-ctrl-cmd-alt-arrow-up/td-p/636043 The suggested solution does not work, since there is not menu option for "Enter the Push to Talk mode. Release to mute the microphone" (taken from https://support.skype.com/EN/faq/FA12074/what-keyboard-shortcuts-can-i-use-with-skype-for-mac-os-x). I gotta say this is absolutely ridiculous!Why would skype hijack a hotkey for the whole system if it's not even in focus?! Please provide a way to disable specific hotkeys or alltogether. Is there any other way to fix this right now? Mac 10.10.3Skype 7.10 (777)

I don't recall what the CTRL-COMMAND-DownArrow shortcut did, but have you tried just using COMMAND-DownArrow or CTRL-DownArrow depending upon what you want? Also see Mac OS X keyboard shortcuts.

X61 Keyboard buttons becoming unresponsive

Hi, when I press either of the buttons above the left and right scroll buttons, the keyboard (excluding the windows button and CTRL ALT DEL) becomes unresponsive. Does anyone know how I can reverse this - and what are these buttons for? The buttons have a rectangle with left or right corner folded over. Thanks John

Linc, I did some testing and verified this only occurs when plugging in my iPhone 4 - the keyboard will intermittently die out and eventually become unavailable. Unplugging the iPhone solves the problem. Did Apple not supply enough power to the USB system to charge my iPhone and use a keyboard at the same time? Those are the only two devices connected...

Keyboard problems after xorgconfig Dell VostroV1400 [Solved]

Hi all,
I installed Arch on my Dell Vostro V1400. I installed xorg too. Then I did hwd -xa. After this I tried 'startx'. The screen showing xterm came but the keyboard and touchpad were not working. I could neither go to the console nor do Ctrl+Alt+Del to reboot. Did hard shutdown.
I then tried xorgconfig but found there was no mention of my dell vostro keyboard, the X3100 graphics card, touchpad etc in it. To add to it my laptop manual does not have any information about horizontal and vertical syc rates. It only states that the laptop display is 14.1" WXGA capable of 1280x800 resolution. Nothing else. So, I choose the defaluts.
# File generated by xorgconfig.
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
# Load "type1"
Load "freetype"
# Load "xtt"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
# FontPath "/usr/share/fonts/TTF"
# FontPath "/usr/share/fonts/Type1"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "inspiron"
Option "XkbLayout" "us"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 64.3
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-100
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "* Generic VESA compatible"
Driver "vesa"
#VideoRam 262144
# Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "* Generic VESA compatible"
Monitor "My Monitor"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
Even after xorgconfig the same problem. I can start X with startx but the moment X comes, the keyboard and touchpad freeze. Don't know what to do. FYI, Dell has stopped this particular model V1400 and I could not find any information in their website. As you may be knowing, almost all the 'reviews' talk only about the external appearences, how the camera is, etc... stuff only. So, no information there too.
Kindly help me to get X working.

tomk wrote:Finally, if you need to post long config files, use code tags, not quote tags. I have fixed it for you this time.
I'm sorry about that. Will take care next time.
By the way, the problem is solved. Somebody in the IRC pointed me to a wiki related to input-hotplugging. Frankly, I did not understand much of it except that I needed to install package/s: xf86-input-evdev, xf86-input-vmmouse and xf86-input-synaptics.
Also, was the advice that 'hal' should be included in the DAEMONS, if not already done and that it should come before anything X related in the list. Edited '/etc/rc.conf' accordingly and X is working fine now.
Thanks,
SV
Last edited by saivin (2009-01-03 18:17:15)

Unable to login Server by Remote or CTRL + ALT + DEL

We are using Windows Server as a Reporting Web Server (a solution of Genesys), normally the server was accessed well via Remote Desktop or keyboard+screen directly, but after a while, they became unable.
With Remote Desktop from our laptop, we've continued receiving a denied remote connection message.
By plugging in the keyboard and Monitor, the firs screen is Ctrl + Alt + Del requirement, but that buttons did not work, seems like the server was hung up. The last solution was hard reboot it, then we were able to access again.
The situation kept happenning time to time. I checked task manager and can say that server's load was quite low (CPU and RAM was about 50-60%).
Any idea for my issue, please?

Some hardware if booted headless keyboardless requires another boot to recognize the devices.
For the RDP issue this one may help.
https://support.microsoft.com/kb/2779073
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Tried installing Windows Vista, cancelled install and now it won't boot from the OEM Vista DVD, all i get is BOOTMGR is missing error... Ctrl Alt Del to restart and when i turn the computer on i get a blank screen and pressing C is not working to boot....

Topic says it all...
My friend started a installation of Windows Vista, but pulled out after deleting all partitions...
So now i power it on, get a blank screen (seems a bit gray because of backlighting, should show the apple logo right?)...
Then after like 15-20sec it will throw out a:
BOOTMGR is missing
Press Ctrl+Alt+Del to restart
I have a OEM Windows Vista DVD in the drive, and i know... Windows 7 is better... but i'm not that fond of stealing software from Microsoft and i have 10 licenses for Vista...
I have tried pressing C while booting up but it doesn't work...
Does anyone here have a magic soloution for me, and no i will not install MacOS on it !!!

Deleting Boot Camp partitions the conventional way will not work . You must use the Boot Camp Assistant to remove a Boot Camp partition. Here is a link to the guide.
http://manuals.info.apple.com/en_US/Boot_Camp_Install-Setup_10.6.pdf
The way to restart is to hold down the option/alt key during startup* and then selecting the Mac OS. If you have a valid Boot Camp install of Windows it would show up during this type of start up.
* hold down immediately after pressing the power button and until the OS choice screen appears.
To summarize.
1 Use the above method to boot into Mac OS.
2 Download the instructions and read them.
3 Use Boot Camp Assistant to remove the partition.
4 Pick your friends more carefully.

How can I disable ctrl+alt+del and other keys

I need help on how to disable some keyboard key combinations (ctrl+alt+del)in particular. Disabling other keyboard keys is equally welcomed.
Also how can I disable Windows 2000/XP's Task Manager from exposing my running program to be terminated.
Thanks

I need help on how to disable some keyboard key
combinations (ctrl+alt+del)in particular. Disabling
other keyboard keys is equally welcomed.This is not a java question per se. I would recommend searching on MSDN or some such site to figure this out.
Also how can I disable Windows 2000/XP's Task Manager
from exposing my running program to be terminated.This can be done by limiting the permissions of the Windows user that you would like to prevent from doing this. The user manager lets you do this.
>
ThanksNo problem.

HT5628 ctrl-alt-del logon & Bitlocker on Win8 with new MacBookAir doesn't work

Am running the latest BootCamp and have a brand new MacBookAir and Win8.
On the Windows Logon Screen I can't use ctrl+alt-del even with fn key or on-screen keyboard. The only way I can logon is by plugging in my keyboard - does any one have a tip please?
I'd like to use Bitlocker HD encryption in Win8, but don't know how to do this, e.g. with storing the Key on a USB thumbdrive if that's the only option - any help is apppreciated.
Thanks!!
Chris

Tthere seems to be a non TPM compatible BIOS on MacBookAir: http://technet.microsoft.com/en-us/library/ee449438%28WS.10%29.aspx#BKMK_NoTPM
And the a plugged in USB drive during the BitLocker Requirement Check yields no change.

New T400 ctl-alt-del not working

I just a new T400. It has happened twice that when I try to enter back from blocked screen/standby using the ctl-alt-del it does not work (as if the keybord was desconected... nothing happens). I have to force power off and then it works.

If I activate this, will the user receive a popup when deploying some apps
(bundles) ?
"Shaun Pond" a crit dans le message de groupe de discussion :
[email protected]..
Normand,
the one shown in TID 7006211 and the docs
http://www.novell.com/documentation/...b.html#brybx5o
Shaun Pond

Disable Window keys ALT+TAB, CTRL+ALT+DEL

Hello i am developing an application in which i need to catch the ALT+TAB and CTRLALT+DEL key events and handle it in my own way.
The default action of showing the next window or the task manager should not take place.
In the event handler i have given
eventName.consume();
also.But the default handling is also done.
How do i stop the default action from being done?

Windows will not allow any application to catch the CTRL+ALT+DEL keystroke. In Windows NT-kernel OSes, this keystroke brings up a menu which, among other things, allows the user to change his or her password. If an application could intercept CTRL+ALT+DEL, it could present itself in such a way as to look just like that dialog. Then, if a user typed his or her password into that dialog, the program could log or transmit that password plaintext, severely violating security.
All sorts of exploits like that would be possible. This is why you can't block system keystrokes.
Is there any particular reason you need to override this behavior? Perhaps we can help you find another solution to whatever problem made you decide you wanted to catch those keystrokes in the first place.

Blocking keyboard buttons STRG+ALT+DEL

Similar Messages

Maybe you are looking for