Blue borders still

Hello, I hope someone can help me, I've been doing my first
site & some how I appear to have moved the page away from the
edge of the design screen & now have a pale blue border around
the edge of the design & can't seem to find out how to get rid
of it, it's also on the page when previewed in IE & FF.
Hope you can help.
Here is a link to the very un-finished site www.sbtaxis.co.uk
it looks as though it has come away from the edges in dreamweaver
design stage???

Here's your blue -
<body bgcolor="#C0DFFD">
This file is not found -
http://www.sbtaxis.co.uk/mm_travel2.css
So that means there is no control of the default <body>
tag margins. That's
where your gap is coming from that lets the body background
color shine
through.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"dave2103" <[email protected]> wrote in
message
news:g2sh5t$jtb$[email protected]..
> Hello, I hope someone can help me, I've been doing my
first site & some
> how I
> appear to have moved the page away from the edge of the
design screen &
> now
> have a pale blue border around the edge of the design
& can't seem to find
> out
> how to get rid of it, it's also on the page when
previewed in IE & FF.
> Hope you can help.
>
> Here is a link to the very un-finished site
www.sbtaxis.co.uk it looks as
> though it has come away from the edges in dreamweaver
design stage???
>

Similar Messages

Im having troubles trying to download desktop apps, the blue wheel still spinning in the app tab, i've already try the solutions i've read here, uninstall CC and installed it again, uninstall it, download it again and install ir, and nothing works, I'm wo

im having troubles trying to download desktop apps, the blue wheel still spinning in the app tab, i've already try the solutions i've read here, uninstall CC and installed it again, uninstall it, download it again and install ir, and nothing works, I'm worried because i have a course of some software tomorrow (oct 10). I have a mac, and it has all the system requirements. Can someone help me please?

I think I had the same problem. I've also tried a lot but I found my way out.
Follow every step of this:
Creative Cloud Help | Install, update, or uninstall apps

Blue borders - Where did they come from?

I have some big button links on my site that have developed
blue borders. How did this happen and how can I get rid of them?
Really screws with my color scheme. (Got some other issues, too,
but this is the most aggravating).
http://christchapelmaconga.org/sportstowne/ccsthome.html
Thanks

>>Almost everyone disables the default border around
image
As do I. I responded to what I perceived as a knee-jerk
disdain to default
behavior. Best to know why things are the way they are before
changing them.
You and I know why the border is there and can make an
informed decision as
you have. I don't thank that is true for the OP. Just my
read.
Walt
"Michael Fesser" <[email protected]> wrote in message
news:[email protected]..
> .oO(Walt F. Schaefer)
>
>>If your response is serious I fear you have a rough
and uncomfortable road
>>ahead. If you would take the time to actually
understand HTML you would
>>discover default behaviors usually (always?) have a
logical purpose. The
>>blue outline you so hate is there to make navigating
the site easier for
>>the
>>visitor. You seem to care nothing for the visitor
only what you want. 10
>>years ago you might have gotten away with that
attitude. Today's Internet
>>is
>>user/visitor-oriented not designer-oriented. You
really have to understand
>>how things work and why before you start slashing
usability to satisfy
>>your
>>own tastes.
>
> You have very valid points, but I think it was a little
overreaction in
> this case. Almost everyone disables the default border
around image
> links, including me. Remember how often this question
comes up here.
> And usually it doesn't cause any problems, because if
done properly, it
> should be already clear by the image itself that you can
click it, for
> example a button or a logo. You really don't need an
additional border
> there telling "hey look, I'm a link".
>
> Of course this doesn't apply to the link's outline (the
dotted border),
> which definitely is an important and required usability
feature.
>
> Micha

My iphone 5 screen went blue but still on. can someone helpme?

my iphone 5 screen went black a few minutes later it was working again, the day after it just went blue but my iphone still working , 2 days have gone and nothing happened. what to do?

Hello, jaimerodgz.
Thank you for visiting Apple Support Communities.
Here is a resource that may provide some troubleshooting steps to help with this issue. See the section related to the iPhone display.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
If all troubleshooting steps have been processed, I would recommend taking a look at the section labeled Issue not resolved.
Cheers,
Jason H.

Get rid of blue borders around images in links

When you use an image as a link, a blue border surrounds the image like this:
This is because since Dreamweaver CS3, Dreamweaver no longer inserts border="0" in the image (<img>) tag. Although some people will tell you to set the image border to zero in the Property inspector, this is NOT the correct way to do it. Use CSS instead.
Create the following style rule, either in a <style> block in the <head> of the page, or preferably in an external style sheet:
a img { border: none; }
This automatically removes the blue border from ALL images that are used as links. If you use an external style sheet, and link it to all the pages in your site, the same rule affects every image link in your site. This is much more efficient than adding zero to the border property in each individual image.

I must have been on the wrong page when I looked initially.
@JohnJohnJohn,
If you ever want to have a search engine index your site (so people can find you using Google and the like) you need to seriously reconsider what you're doing. Since your pages consist of a single image that is then mapped, there's nothing for the search engines to index in any meaningful way. Search engines rely on relevant, keyword rich, html text to give your site any kind of position in a viewer's search results. As far as the search engines are concerned, right now, your pages are blank.
Also, as it stands now, anyone with a screen reader will get what amounts to a blank page, even if they do happen across your site somehow.
Finally, the mailto links you are using won't do anything when clicked for any user who relies on browser based email clients (gmail, yahoo, hotmail, etc) because the mailto link activates email clients installed on the actual computer. If someone viewing your site without something like Outlook installed, clicking your mailto link does nothing. It's much, much better to use a form to email script (usually available from your hosting provider) to allow users to contact you no matter how their email is set up.

IMovie08 import ceases: import window remains blue; controls still work

I'll be importing HDV video clips just fine. Then I'll try to import the next clip as usual by clicking the controls in the import window...the camcorder will correctly play...but this time the import window remains blue: no image is shown and no importing happens. The controls work perfectly so the connection between camcorder and iMovie seems perfect. iMovie suddenly just cannot see any image.
I've tried everything I could find recommended in posts here and elsewhere. The only reliable way to remedy the problem is to reboot the Mac, but that works only temporarily. After rebooting everything works perfectly...for 10 to 20 minutes, then the problem reoccurs.
These are unlikely root causes:
* Hardware is a 3-week old MacPro with giant RAM and storage
* Software is the latest OS release and latest iMovie08 release, 7.1.4
* Camcorder is a 2-month old Sony HC9, set to output in HDV mode
* I've tried ad nauseum unplugging/replugging the firewire, turning off/on the camcorder, and quitting/restarting iMovie...to no effect.
I'd sure value your help. I have another hour or more to import and this is killing me.

The information that I found suggested that the Mac identifies the format of the video device connected to the firewire as soon as it is plugged in, and then retains that setting until the next reboot. If there is nothing playing, the camera will tell the Mac that it is a PAL recorder and the Mac will then only expect to capture PAL formated video. If an NTSC video is playing then the Mac will identify the correct format for the capture, keeping that setting for the firewire until reboot.
Because the setting is at the hardware and OS level it will effect all capture software, but different software will handle it differently and produce different errors. iMovie '08 says nothing and just pretends to import with a blue screen, Final Cut says Preview Disabled, and iMovie '06 says something about getting half-sized frames during the capture and not being able to import.

Toshiba 56HM195 picture and sound shut off; blue light still on

The sound and picture will randomly shut off together but the blue light on the front under the screen stays on. The tv will not respond to the remote or the buttons on the side. I have to unplug then plug it back in and it will work fine for several hours before doing it again. I have tried replacing the lamp but that did not change anything.
Any thoughts would be greatly appreciated!
Thanks

Try leaving the TV unplugged from power over night. If the problem persists, it may require servicing.
- Peter

Blue Screen still... now what?

I installed the new OS and i'm getting the blue screen after restarting. Now I tried the 3 options and neither of them are working. So what do i do now?

Hello dub:
I assume you are referring to the three options outlined in this knowledge base article:
http://docs.info.apple.com/article.html?artnum=306857
You need to post more specific information - detailing exactly what you did and what happened as a result.
Barry

Canon RAW images displaying color borders at contrast edges

I noticed annoying color borders in RAW images taken from my Canon PowerShot S120. They look like the color planes are misaligned. Around high contrast areas (between light and dark grey) I can notice magenta borders in one direction and cyan borders in the opposite direction, both approximately 5 pixels wide.
I record and store images as RAW+JPEG pairs. In Aperture I set RAW as master.
In the original JPEG of the image pair from the camera this error is absent, the color is neutral on both contrast edges.
The error in the RAW image can also be seen when the file is opened directly in Preview or if the RAW image is exported to a TIFF using Aperture and then opened with Preview.
I compared this to older RAW+JPEG image pairs I took with the previous model, a Canon PowerShot S90. There I see yellow and blue borders in opposite directions in Aperture or Preview, also approximately 5 pixels wide. In the camera's original JPEG image from the image pair this is still a bit visible, but far less pronounced.
My oldest RAW images taken with a Nikon E8800 (.NEF) don't show such artifacts when viewed in Aperture.
Since the JPEG from the pair does not have these artefacts my guess is that the RAW converter is not optimal or some metadata in the Canon RAW files (.CR2) is either missing (worst case) or not used correctly.
My hope is that I just have to adjust some presets to correct this. Else it is probably up to Canon or Apple.
Does anyone know how to fix this issue (without going through the individual files, if possible)?

Hi Keith
Thanks for the infos.
Just to clarify:
I didn't ask for RAW, I just use raw formats because there's curretly no better alternative. I would like to see what came into the lens - like an ideal hole camera . Ordinary JPEG is way too limited (8bit resolution per color channel plus really ugly compression artefacts).
For archiving I would much prefer the JPEG2000 format with lossless encoding and as many bits per pixel as the camera's analog to digital converters provide, linearly encoded (above the noise background but including one bit of noise, to be precise). But, alas, when I did my last experiments (Snow Leopard) the image framework in Mac OS X did still not support more than 8bit resolution per color channel in JPEG2000.
One good thing about raw formats is that the corrections could actually be better than what is always done by the camera's firmware for JPEG or standard TIFF at the time of the shot. Another good thing is that various sensor and color patterns can be handled directly.
If Canon can do it in DPP, then I strongly hope they will also provide a better converter for Mac OS X. On some pictures this aberrations are really obvious and irritating.

Borders by "chance"

hi all, borders are a hard thing also in numbers '09. if i select a few cells an select a border with the inspector it works not proper. i can not figure it out why some cells not work with the selected border. are borders still a hard thing ore do i miss some special informations how i have to work with borders? thanks in advance for a feedback!

I really don't understand what is complicated here.
(1)
Select the range of cell
In Inspector > Tables, click on the cross which is highlited in light blue in the screenshot
In the menu 'lines' select the solid thick one
In the stroke select the wished value. I used 2points
Click the color button to open the color palette. Here I choose the standard red.
(2)
Select the range of cell
In Inspector > Tables, click on the square which is highlited in light blue in the screenshot
In the menu 'lines' select the solid thick one
In the stroke select the wished value. I used 2points
Click the color button to open the color palette. Here I choose the standard red.
(3)
That's all folks.
To morrow I will be back to read what was difficult.
Yvan KOENIG (from FRANCE samedi 14 février 2009 22:31:34)

Table Borders Showing?

My clients says the tables are showing blue borders. I don't
see them in my browser (Firefox).
All table elements are set to '0" (border, cell space, cell
pad) and to default color which is no color.
http://www.fayeslight.org
Any idea what's happening and how to fix it?
Thanks!
~*Beth

Read this for your IE Png transparency issue:
http://support.microsoft.com/kb/294714
Set a zero margin to move your page to the top of the screen.
"Bethlove" <[email protected]> wrote in
message
news:f00ckd$e86$[email protected]..
> Thank for the advice. The way they've described it, I'm
sure it's the
> layout
> tables showing.
> I just looked at it in Explorer..still see no borders.
I've asked them to
> tell
> me what browser & internet speed they're viewing it
on.
>
> No I've noticed though in Explorer, there is extra space
at the top of the
> pages. The table should layout at the top and center. I
tried adding
> align="top' but it didn't make a difference. Any ideas
on that?
>
> thanks,
> ~*Beth
>

I have paid for Creative Cloud - illustrator CC 1 year monthly plan, but it still show "Trial Expired". I have tried to sign in and sign out creative cloud many times, but still can't work. Please help!

I have paid for Creative Cloud - illustrator CC 1 year monthly plan, but it still show "Trial Expired". I have tried to sign in and sign out creative cloud many times, but still can't work. Please help!

Does your Cloud subscription show on your account page?
https://www.adobe.com/account.html for subscriptions on your Adobe page
Also,
This is an open forum, not Adobe support... you need Adobe support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

I ordered the full creative cloud on sunday and received an order number but still can't open any of the programs. When i check the status of my order online, it says it can't find it. Is this normal after 3 days?

I ordered the full creative cloud on sunday and received an order number but still can't open any of the programs. When i check the status of my order online, it says it can't find it. Is this normal after 3 days? I tried asking in a chat window instead of the forum but no one answered and after about ten minutes my screen restarted and closed the chat window down. It seems a little frustrating not knowing what happened to my order and not being able to contact anyone. Is all this usual with Adobe or are they just having technical problems this week?

Does your Cloud subscription show on your account page?
https://www.adobe.com/account.html for subscriptions on your Adobe page
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

Why does my Mac Pro randomly flash a blue screen to both monitors?

For a while now my Mac Pro (Early 2009) has this occasional issue. The system uses a pair of ViewSonic 22" monitors. At random times, both monitors just turn to a solid light blue color. After a brief time (1 to 5 seconds maybe) normal operation returns. The system is still working. Text typed on the keyboard during the 'blue' screen still shows in whatever application I'm in. Just the screen seems to be affected.
I leave the system running 24/7 with only occasional reboots (weeks or months apart). The screens I turn off at night. Most of the time this happens right after the system 'wakes' in the morning (temperature does not seem to be a factor). Although the system is doing this as I'm typing this. The blue screens show up than go away on their own. This repeats from one to ten times before it goes away. Once it is 'done' everything is normal until it happens again.
This 'issue' has been occurring since the original Snow Leopard. But, it also happened with Lion and now still happens with Mountain Lion (just upgraded to 10.8.2).
I am thinking this has something to do with the graphics controller (NVIDIA GeForce GT 120 512MB). But, I've never found any online references to this sort of behavior.
Any comments or suggestions will be appreciated.

The cable connections have (so far) solved this problem for my situation. Even though the monitor's DVI cable was firmly connected to the mini Display port connector, when I touched it the attached monitor would go 'blue' or lose its connection entirely. After disconnecting and reconnecting this junction the monitors would still take a hit on touching the connection. I also checked the connection of the mini Display port connection to the graphics board and could not push it in any further. However, after a second go-round I unplugged this connection to the board and reconnected it. I am certain it was fully inserted the first time. But, connection contacts can oxidize over time and sometimes it may just need to be disconnected and reconnected to 're-wipe' the connections. This effectively cleans them at the point of contact. So in my case I'm thinking it was the connection age that was an issue more than a 'loose' connection. Either way, I haven't had this issue for the past two weeks.

Active creative cloud subscription but still showing trial?

Hello,
I currently have an active Creative Cloud subscription for Photoshop. I recently just wiped my PC (Windows 8.1 - custom build), and upon redownloading photoshop, it's asking for a serial number upon Photoshop launch when I use my log-in. I've followed all directions:
- Changing directions to English International
- Logging out/in
- Etc. (from the list of usual culprits)
... but nothing seems to be working. Any ideas?

Ask for serial number http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html
and
Does your Cloud subscription properly show on your account page?
If you have more than one email, are you sure you are using the correct Adobe ID?
https://www.adobe.com/account.html for subscriptions on your Adobe page
If yes
Some general information for a Cloud subscription
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
If no
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

Blue borders still

Similar Messages

Maybe you are looking for