Bluetooth Headset will not work following upgrade of PC desktop software

Recently I updated my laptop with the latest desktop software in order to allow synchronization between Microsoft Office 2010 and my blackberry tour.
The sync works!
But now that I have upgraded, I am having a problem with my bluetooth headset.
After syncing my phone to my PC over bluetooth, my bluetooth headset connects to the phone ok but when you try to use it no sound comes through either the headset ear piece or the phone.
So if you try and dial a number, the phone rings where you are calling but you cannot hear the ringing or the person on the other end once they have answered it.
To correct the problem you have to remove the battery from the phone. Then once you replace the battery and wait 5 - 7 minutes for the phone to re-initialize the headset works just fine. Until the next time you sync the phone with the laptop of course. Then the headset stops working again.
I have tried deleting all the bluetooth devices from the phone and re-connecting them. Does not help.
Anyone else seeing this problem?
This is my 2nd blackberry. My 1st was a Perl on T-Mobile. Never had a problem. But this tour from verizon has be a problem from the start. Think my next phone is likely to be anything but blackberry!

Hello ralpha,
I would suggest you back up your BlackBerry data and clear the Bluetooth Options database. Re-Pair your headset and try making calls again.
KB10167 will show you how to clear individual databases.
Let me know how you make out.
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Similar Messages

HT1203 i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

It is almost as if the program does not exist on my computer. If I search for it, the only thing that comes up is the installer. I cannot find it anywhere despite the fact I have installed it numerous times, uninstalled it and conducted a fresh install, and the Adobe website checks says that it is installed.

Windows xp will not boot up after installation of desktop software 4.3.

windows xp will not boot up after installation of desktop software 4.3. Where do I start to get my p.c. going again ???

I get the message that a recent hardware or software change might have caused this.
The computer does not boot up in safe mode or last known good configuration.
I'm glad you think the software has nothing to do with it, but perhaps you can also explain why this problem started as soon as I downloaded the desktop software and tried to restart the computer.

Bluetooth keyboard will not connect after upgrading to 10.9.2

I upgraded mavericks to 10.9.2 bluetooth keyboard will not connect my blutooth mouse will connect my trackpad will connect but not my keyboard. Keeps saying it cannot pair . I reset the VRAM and keyboard still will not connect

Tried all of the below and nothing is working.
Apple Support: Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/kb/ts3048

Facetime will not work after upgrade to io6 can anybody advise?

Facetime will not connect after upgrade to IO6 can anyone advise?

Hey there,
Maybe start here
[Troubleshooting Automatic Software Update in Mac OS X|http://support.apple.com/kb/HT1569].
Otherwise, try deleting this file. com.apple.SoftwareUpdate.plist located at /Users/YourName/Library/Preferences. Drag that .plist file from the Preferences folder to the Trash, empty the Trash and restart your Mac.
Have you tried resetting your widgets by hitting Command-R? If that doesn't, work trying trashing the two dashboard preference files.
The two dashboard preference files are in the following directory:
yourusername -> Library -> Preferences ->
The file names are:
com.apple.dashboard.client.plist
com.apple.dashboard.plist
Hope this helps.
B-rock

My HP LaserJet 1536 Scanner will not work after upgrading to Windows 10

I just upgraded to Windows 10, and now the scanner will not work, although I can still print. I downloaded the latest driver, but this does not seem to help. The error message I get states that scanner communication cannot be established. Please let me know if you have any suggestions. Thanks!

Greetings , I saw your post regarding the problems you are having with scanning after upgrading to windows 10.
I would start with the simple, have you tried just restarting the computer? Have you made sure your computer has all of it's windows updates? How can I tell if my computer is up to date? Most products do have updated software available for Windows 10, did you install the correct driver?HP LaserJet Full Feature Software and Driver I've also seen a few posts that say the Windows 8.1 driver will work for Windows 10 as well, so you could try that too.  HP provides a free tool called HP Print and Scan Doctor to diagnose and resolve printing and scanning problems. I recommend downloading and running the HP Print and Scan Doctor, if it doesn't fix it automatically let me know what errors or messages you receive.  Do you know if you are able to scan using Paint? To Scan from Paint: HP Multifunction Printers - How to Scan: Windows 8
(It's the same for Windows 10, from what I've been told)Right-click the Start button () in the lower left corner of the screen, click Search, and then type ...Click Paint in the results.Click File, and then click From scanner or camera.Select your printer, click OK, and then click Scan.  Have you tried just using the New Scanner app in Windows 10? It's the same as the one for Windows 8. Here are some resources;New Scanner app in Windows 10Scan app for Windows: FAQ
And a Video link...    Please let me know if any of these steps resolved your issue, or if there is anything else I can do to help.  I look forward to hearing from you!  Thanks,

USB headset does not work after upgrading to Yosemite

I upgraded MacBook Pro 13" retina to Yosemite and lost Logitech PC Headset 960 sound.
System preferences shows it in input and output, but no sound.
After I plug in and out headset I loose even internal sound for Spotify.
When headset is plugged in Youtube videos on Chrome stops playing, when I take them out - video resumes.
Hardware should be ok, because I have 2 pairs of such headset (both of them are not working) and the same hardware on Windows 7 (bootcamp) do work with headset perfectly.
Have anyone the same/similar problem. Does anyone has solution? Should I migrate back to Maverick and how to do it?
Already reset everything what was recommended to reset etc.

1. System Preferences > Sound> Sound Effects
Play sound effects through:
Select Logitech/headphone and then back to "Selected sound output device".
2.Launch iTunes and play a song through headphone and adjust the volume.

My bluetooth headset is not working with my iPad2.

I have also tried this headset with my Android Razr and I am having the same problem: the devices will "pair," but sound will not come out of the headset. Instead the sound continues to come out from the speakers. From what I have learned, this means the devices are simply not connecting. Is there a reason for this? I just got this headset. It is brand new, and I will be furious if it turns out to be faulty!

Hi hopegreenie,
The troubleshooting I would recommend is this:
iOS: Third-party Bluetooth accessories
http://support.apple.com/kb/ht1664
I hope this helps!
- Ari

Kodak printer will not work after upgrading to Yosemite.. Please Help

I have uninstalled and re installed my kodak 5250 more than once and it still does not work. I have carried out a clean install of my Yosemite OS and still no joy. How do i fix this?

I've got the 7250 as well -- same exact issue. I sent an e-mail to Kodak support on Friday last week -- haven't heard anything, but they did ask for 2 business days time to respond.
I've been running the Yosemite Beta on one of my machines for a few months now and my printer stopped working on that one after the upgrade. I kept Mavericks on my other Mac until this weekend, and printing still worked from that machine until I upgraded to Yosemite over the weekend.
I've got Linux and Windows virtual machines that can print to the ESP 7250, so I can still print, albeit with the hassle of firing up a VM and printing from there... I sure hope Kodak responds! I offered to help them test any beta-quality drivers they may have, so -- we'll see what they say!
I've been planning to ditch the printer and get a new one, but I'd rather not have to do it right this minute just for a driver issue :-/

Compressor not working following upgrade to snow Leopard

Out-oh. I recently upgraded to a new MacBook pro and reinstalled the final cut suite. I'm running Mac OSX 10.6.2 and compressor 3.0.5. Compressor opens fine, but when I submit a job, it says, "Unable to submit to queue, please restart your computer or verify Compressor installation is correct."
Restarting is no help. Any ideas?
I'm afraid I'm going to have to re-install. But if I do that, what's stopping it from not working again? I just reinstalled the whole suite.

http://support.apple.com/kb/TS1888
http://www.scottsimmons.tv/blog/2008/01/11/compressor-hatred-resolved/
http://www.digitalrebellion.com/compressor_repair.htm

Time machine will not work after upgrade

Since I upgraded to Mavericks on Oct. 22, Time Machine will not run properly, or at all for that matter. It tells me that it is 'Preparing Backup', but it was said that for over 4 days now. Suggestions?

I had a strange issue with Time Machine and Mavericks. Time machine wouldn't recognise the external USB drive I was using for backups. There was nothing in the logs, no errors, the time for the backup would come along and then it would skip to the next hour with no backup being done. What I was doing was removing the drive from Time Machine Preferences and re-adding it, TM would then start a manual backup and from that point it would run fine.
I ended up doing a Disc Verify on the drive (all ok, no issues) and shut the machine down. Today I booted up and staright away the TM Icon for the drive is correct and the TM is running as it used to.
I have three macs, all with external USB drives, the other two macs have no issues with TM, only my main one. Having a look at other issues, my external drive is a Western Digital unit so maybe that has something to do with it, though it can see the drive fine from Finder.
Anyway, if you are having similar issues, just run the Disc Verify Utility (and repair if there are errors) and hopefully it'll fix up that particular issue.

Gmail POP will not work after upgrade to Leopard (Mail 3.5)

Hi,
I recently upgraded to Leopard and was previoulsy using Gmail for my POP service, whuch worked fine.
I was a little disappointed that the upgrade disabled by HTTP app that allowed me to access my Hotmail, but no big.
The big deal here is tht I have tried everything listed on Gmail's troubleshooting page for POP accounts and I can't get Mail to connect to the smtp nor pop server. I tried deleting recreting the account, verified settings with what's listed, opening the firewall, testing the telnet connection (nothiing happened, so I guess that's good?).
I sent this issue to Gmail but all I got back was a redirect to the Troubleshooting page and an .exe tool that I can't use.
Anyone else out there that may have this problem or have a clue as to what I could be missing?
I was also loged in to Gmail while setting up account so I know I can access the mail outside of POP.
Thanks for reading!!!

After spending a couple of hours researching this the solution that worked perfectly for me was to delete all plist files.
1. Start with Finder/Macintosh HD/Mail/ look for the plist file there and delete it.
2. Go back to Finder, ctrl click and select Go to Folder
3. paste this: ~/Library/Mail/
4. Find all plist files and delete.
If you feel more comfortable, you may save them someplace as a backup.
After deleting all plist files related to Mail, restart your PC. If you don't it may not work.
Either prior to doing this or after, be sure your settings are correct for gmail.
Once I did this, all of my incoming and outgoing messages loaded properly and everything worked perfectly.
If you need additional assistance feel free to leave a message.

Premiere Pro CS3 (Version 3.0) will not start following upgrade to Windows 8-- rest of CS3 is fine

Recently upgraded from Windows 7 Ultimate to Windows 8 Pro;
next time I tried to open Premiere Pro 3.0 (Adobe Master Collection CS3), splash screen scrolled normally through files being loaded until "SolidComposite.AEX", where it white-screened & crashed.
Tried removing that file, it crashed on the next ".AEX" file; removed all ".AEX" files, it began crashing on ".dll" files;
kept removing THEM, just for the heck of it, until the software loader couldn't even start.
I popped in the CS3 disc to repair the installation-- on the entire suite, for good measure;
re-booted & started Premiere-- crashed at the exact same point.
Uninstalled and then re-installed Premiere-- the entire suite in fact, since there are so many common processes;
couple of hours later, re-booted & started Premiere-- same exact thing at the same exact point.
I found this same problem in at least a half-dozen threads, going back to '07--
and several of them even mentioned the same exact file as the trigger for the crash!
Unfortunately, not one of those threads has ever ended with an accurate diagnosis of the problem,
nor a solution more insightful than reinstalling both the CS & the OS.
I don't want to abandon Windows 8...
but on the other hand, I just can't afford to pony up another grand to upgrade the CS Suite again, either...
Besides: CS3 is everything I need, and it has worked wo well for so long--
even now, Premiere Pro is the only software in the suite with a problem!!
(I used Photoshop to create the above screencap)
So I'm hoping against hope that one of you techno-gurus may have come across this ITRW--
and actually SOLVED IT!!

Thanks for your prompt reply, John-- and for NOT simply advising me to spend my kid's tuition on more of your company's products...
Actually, I had tried the "Run as Administrator" option already, having found it in one of those other threads;
there was no change in the sequence described above.
I decided to try another possible solution which I read about in one of those other threads: opening Premiere from a different account.
Incredibly, it WORKED-- sort of...
I got a couple of popups advising me that missing codecs had to be installed-- and upon completion, Premiere opened!
Here's an interesting note: the last file to load was still "SolidComposite.AEX"-- and the "White Screen" I kept seeing was Premiere opening normally. The next thing that displayed was the normal dialog box "Open/New Project"-- I entered a new project name, and Premiere started normally. I even added a few video files as a test... all opened normally.
I returned to the Admin account to see if the fix was in here, too;
but clearly the war wasn't over, over here...
It now appears that some personal setting in the Admin account is causing Premiere to close itself;
I've been reading about the layered security measures embedded into Windows 8-- I'm suspecting the conflict lies there...
I ran the Windows Troubleshooter & got this:
both MS & Adobe confirm that CS3 is fully compatible--here's my sytem info:
Since I seem to have established a fall-back position that lets me use Premiere, my crisis becomes a mere conundrum;
but I know this is gonna gnaw at me anyway, & I'm hoping that this new information might suggest further troubleshooting options to someone who understands the Adobe software and/or the Windows software better than I do!
Speaking as someone who has found many solutions on forums like this over the years, I assure you:
for every person whose post you reply to, there are many more whom you will never know you have helped!!!

Aperture not working following upgrade to Snow Leopard 10.6.3

Until now I have been running OS X 10.5 and have regularly checked and updated software. For photo's I originally purchased Aperture 2 and recently upgraded to Aperture 3 (using an upgrade disc rather than a full version) and all was working fine.
Today I upgraded to OS X 10.6.3, using a Snow Leopard upgrade disc purchased from an Apple shop, then completed a software update which has taken me to OS X 10.6.5 but Aperture will now not launch I just get a pop up stating that "Aperture cannot be opened because of a problem" and then suggesting that I need to check with the developer to make sure that Aperture works with this version of Mac OS X.
I am clearly using the latest version of Aperture and the latest OS X system so am stumped.
I have also attempted to reinstall Aperture using my Aperture 2 disc (still wont launch) then the Aperture 3 upgrade disc (still wont work).
Any help or guidance would be appreciated
Thanks

Welcome to the forums!
Have you tried the Aperture 3: Troubleshooting Basics detailed here;
http://support.apple.com/kb/HT3805
Also as you have just updated software and OS run Disk Utility on your disks.
Tony

Bluetooth recently will not work with my iPad 2 or with iPhone4

Bluetooth on my iPad2 and iPhone4 worked fine until recently. The only change is operating system upgrade so must be some problems with the upgrade. apple is really dropping the ball with their operating system upgrades. The operating system upgrades create more new problems ratther than correct prior probrlems.

This form is for technical help with the iPod Classic, not the iPad. Post this in the iPad forums.
https://discussions.apple.com/community/ipad
B-rock

Bluetooth Headset will not work following upgrade of PC desktop software

Similar Messages

Maybe you are looking for