Bluetooth module and cable install when not factory installed

Can I install a bluetooth module internally to a paviliion dv7 6c27cl
I was told the part #'s are 665595-001 for the cable and 537921-001 for the module
Where are instructions on how to install if possible?
Thank you

Hello lennyl0518. Would you mind posting the product number of your notebook? These instructions can show you how to locate it for me. I can use this information to discern which bluetooth modules are supported by your notebook.
The instructions for installing such a part would be located in the notebook's Maintenance and Service Guide. Here is a link to that document.
Have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Similar Messages

Hi guys.Got a problem with my iPhone 5. I bought it in a shop 4 month ago. After I got a visitor with iOS 7 on his phone he would like to charge his phone with my Laptop and cable.But when he plugged it in it showed a message wich says: " This cable or ac

Hi guys.Got a problem with my iPhone 5. I bought it in a shop 4 month ago. After I got a visitor with iOS 7 on his phone he would like to charge his phone with my Laptop and cable.But when he plugged it in it showed a message wich says: " This cable or accessory is not certified and may not work reliably with this phone".
How is this possible? I then phoned the shop and told them my problem. When I gave them the details I also found out that the imei No. in the iPhone is the same as on the original box. But the the Serial numbers are different. I already try the support centre but I’m over the 90 days.And there is no Apple Store in Namibia. I hope someone can help me here. Thanks, Ralfar

You are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money..

I have a Mac 10.5.8 Dual. I cannot get any videos that I have stored to play. I have tried QT and then DL two out side players from apple site and then went to install and comp said can not be installed on this comp.

I have a Mac 10.5.8 Dual. I cannot get any videos that I have stored to play. I have tried QT and then DL two out side players from apple site and then went to install and comp said can not be installed on this comp.

When Microsoft decided not to support Windows Media any more, they made Flip4Mac available for free. If you have not taken advantage of that free download, this might be a good time.
It may not completely solve the problem, but your Mac will play more with the free player. No need to pay for the Upgrades.
http://www.telestream.net/flip4mac/

IPhone is 17 month old and shutting down when not connected to the mac any this I can do about it?

iPhone is 17 month old and shutting down when not connected to the mac any this I can do about it?
should I bring it to apple ?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these steps in order until the issue is resolved.
Replacing or even suggesting replacing hardware without doing basic troubleshooting first is not very smart.
If basic troubleshooting does not resolve, take it to Apple for evaluation. There is no obligation to pay for anything, the evaluation is free.

"install failed: not enough install space" error

I have a Palm Pre and am getting a "install failed: not enough install space" error when I try to install an app unless I remove one first.
The phone shows that I have 5.8GB of space left.
I'm guessing that this means there is a limit as to the number of apps that can be installed.
Does any one know of any way to increase the number of apps that can be installed?
If not I guess I'll kill some of the worthless Spring apps on there...
Any help you can provide would be appreciated.
Thanks!
Christian
Post relates to: Pre p100eww (Sprint)
Post relates to: Pre p100eww (Sprint)

I am at WebOS 1.1.0. The app itself does not matter, i.e. I can uninstall an app and after that, I can add another. When I get the error, it does not matter what app I tried to install, from where, or what method.
I can replicate the issue no matter how I try to install an app:
Through the official Palm store (developer mode on or off doesn't matter): I get an error "Sorry, Not Enough Memory. Please delete an application you have installed to make room"
Through FileCoaster: I get an error "install failed: not enough install space" error"
Through the SDK "drop to install" method: a DOS window opens and it looks like it's installing the app, but it never shows on the phone, so the install seems to fail
I haven't tried installing the app through Novaterm, if it helps narrowing down the issue, please let me know and I'll give that a shot.
Based on Flipflop 84's comments, it seems like there seems to be a limited amount of space reserved for apps (since he has less apps than me and is getting the error) rather than the number of apps being the issue. 5.8GB of free space are somewhat worthless if I can't use the space for apps, so I'd like to allocate an additional Gig of that to apps.
So I guess the question has changed to "how do I increase the amount of space available on the Pre for installing apps?"
I would think that would be simple for the Linux Gurus out there that seem to be able to disect and analyze the WebOS down to the atom level, but surprisingly, I haven't been able to find any information on it (and I'm a Linux noob myself, so I'd have to clue where to start looking).
If you guys need me to try anything or need more information on anything, please let me know.
I appreciate everyone's help with this!
Christian

Had to reset Ipad to factory settings, now Ipad won't sync to Itunes and apps that aren't factory installed will not open. Is there anything I can do?

Hi,
I hope someone can help. There was something wrong with my Ipad so I had to reset it back to the factory settings. Now the Ipad won't sync to Itunes and only factory installed apps will open. Does this mean that this Ipad is DOA and it is time for a new one? Or is there anything else I can do? It is a 1st generation Ipad.
Thanks for the help in advance.

if all that does not work you can always try to do a recovery mode restore back to factory settings and then set it up as a new device then try to redownlaod every thing again
downlaod past purchases
http://support.apple.com/kb/HT2519
recovery mode
http://support.apple.com/kb/HT1808

Openoffice - empty language modules and spel checking does not work

Hi,
I installed openoffice-base, openoffice-de and openoffice-spell-de. My /opt/openoffice/share/dict/ooo/dictionary.lst looks ok:
### start de
DICT de AT de_DE
DICT de AT de_AT
DICT de DE de_DE
DICT de DE de_DE_neu
DICT de DE de_DE_comb
DICT de LI de_CH
DICT de LU de_DE
DICT de CH de_CH
HYPH de AT hyph_de_DE
HYPH de DE hyph_de_DE
HYPH de LI hyph_de_DE
HYPH de LU hyph_de_DE
HYPH de CH hyph_de_CH
THES de DE th_de_DE
THES de DE th_de_DE_v2
### end de
Ive read nearly every hint on the internet to this problem, but nothing works.
When trying to check the spelling, OO returns immidiately and says, its everything fine, even if i have errors.
I tried to install the dictionary again with the OO wizard, but without success. Im getting some Macro error when trying to run it.
Hopefully someone can help me. Im out of ideas
Edit: sorry i just saw, that i posted my topic in the wrong sub-forum. Maybe someone cann move it to the correct one...
Last edited by setti (2008-04-21 21:23:19)

With hunspell update released yesterday problem still exist... Language modules box is empty, spellchecker not working. When trying to use DicOOo there is some macro error.
EDIT
Mea Culpa. Everything is working now, I've missed update to openoffice-base
Last edited by blasse (2008-04-24 08:11:11)

Bluetooth pairing and so handoff does not work

Hi!
First of all I have a Macbook Pro 15" Retina late 2013 (bought at in the first months of 2014) and and iPhone 5s.
rMBP has installed OS X Yosemite since yesterday and my iPhone iOS 8.0.2
Positiv checks:
- both devices support Bluetooth LE
- both devices are on the same wi-fi network
- rMBP support handoff and instant hotspot as displayed in system information screen
- rMBP could "out call" over facetime and my iPhone to anyone
- bluetooth is activated on both devices
- airdrop (for everyone) is activated on both devices
- handoff in settings -> general on rMBP ist actived
- handoff in settings -> generall -> handoff & ... ist activated on iPhone too
Problems:
- handoff does not work between my rMBP and iPhone
- in bluetooth settings both devices see each other, but they cannot connect to each other
if I try to connect bluetooth from rMBP to iPhone I get: network not available
if I try to connect bluetooth from iPhone to rMBP I get: connections failed
so what can I do to pair/connect them both to each other for these incredible handoff features I want to use?
things I tried out:
- switching airdrop on and off on both devices
- switching airdrop off and on on both devices
- switching bluetooth off and on on both devices
- clearing bluetooth device cach on rMBP and fresh select (pairing) in the settings
- multiple trys on my iPhone to connect with my rMBP
- resetting network settings on iPhone
- resetting all settings on iPhone
I run out of ideas .... can anybody help me please!

yes, there is an additional troubleshooting for your iPhone.
- be sure that you have still OS X Yosemite and iOS 8.0.2 or later (8.1 on Monday) installed on your devices
- on iOS goto settings -> generall -> scroll down to reset settings (last option on general screen) -> reset all network settings
- be sure to reconnect to the same WI-FI after you did that
- be sure to activate Bluetooth
- be sure that Handoff ist activated on your iPhone (Settings -> General -> Handoff)
- be sure your MBP ist on the same WI-FI (same bandwith as well, for example both devices have to be on 2,4 GHz)
if that troubleshooting does not work for you, goto settings -> iCloud -> scroll down to logout from your iCloud on iOS
and than reconnect to iCloud on your iPhone 5c
if that troubleshooting does not work too, goto settings -> general -> scroll down to reset settings
and reset all settings, do the same as before
you can also check on your MBP:
- goto Macintosh HD/library/Preferences/By Host and check for files com.apple.Bluetooth......
- delete them
- do not forget to activate Bluetooth on MBP
if you did the two boot-tricks in the troubleshooting, Bluetooth should be reseted to default, and if you open Settings -> Bluetooth on your MBP
your iPhone should NOT be shown in the list of available Bluetooth devices.
please tell me, what works for you!

Infinite "Installing" when trying to install Micrtek Scanner S/W

I am trying to use the installer CD for my Microtek SlimScan C3 on my G4 eMac running 10.3.9. When I select the installer, I get an "INSTALLING" window and the spinning wheel of death which I must force quit after I get tired of watching it. This same Microtek installer CD and the C3 scanner work fine on my ancient 233 MHz iMac running 9.0.4. By the way, the C3 scanner WAS working fine on my eMAC but recently the eMAC would not recognize the scanner. I have been trying to reinstall the Microtek installer S/W since that happened. Any ideas on what is happening and how to resolve this S/W loading problem on my eMac?

Hello Skyboi01,
Welcome to the discsusions area. A quick search of
the micoteck site tells that the softare is not
supported in X.
Look around here:
http://support.microtek.com/downloads/bycategory.phtml
?slcttbl=10&slctmdl=93
This is odd as you state that the canner worked on
your e-mac. Perhaps you had Photohop or another
application that used a TWain driver to see the
scanner.
I think that you will be able to use the scanner but
you may have to find a driver that will work with
your application..
IMPORTANT Also make sure the cable is good that
goes to the scanner. I assume this is a usb device.
Perhaps a change of cable would allow the scanner to
be seen on the e-mac.
I would change the cable then go to the MicroTek site
and search their support Q's and A's. This should
get you started on finding a solution.
.......mGb.........Jim
I've got my scanner working again!! Here's the answer, although I don't understand the underlying reasons. I remembered that I had a similar problem over a year ago when I tried to use my older Epson printer with my new eMac. The old printer CD just would not load under Classic. Here's what I did then and just repeated for the scanner. It works! I loaded the scanner software on my old iMac running OS 9.0.4. Then I copied the various extensions, preferences and the Scan Suite application to a ZIP drive and transferred those extensions, prefs and apps into the eMac's OS Classic system folder and applications. Viola! The scanner and software (which could not be loaded from the scanner CD) work perfectly with OS9 Classic running under Panther. It would be interesting to learn from those of you who know the inner workings of the MAC OS why this manual insertion technique from 9.0.4 to 9.2.2 (??Classic??) works yet you can't load the software pieces from the original scanner CD directly into OS Classic when running OS 10.3.9.

Re-install OS over factory install?

I have read in various places that some users like to wipe the drive on a new computer and re-install the OS from the Restore disks. They seem to think that they have fewer or no problems compared to a factory install.
I am expecting a new Mac and am wondering, is this a myth or does it have merit?
BC

On that same note, others think piecemeal migration after booting the machine the first time and creating an admin user account is the way to go. Not so. Best is to hook up your old machine or a bootable backup/clone on an ext FWHD and use the Setup Assistant to do the migration. Precludes a host of permissions issues arising from the first method. Details in the booklet that accompanies the machine. Also, for more on this, see http://discussions.apple.com/thread.jspa?messageID=11071897 for more.

Installed application not really installed?!

Hi guys,
i got a very strange and annoying problem here. I installed handbrake with pacman w/o any errors but it doenst show up anywhere.
locate gives 0 results and there are no entrys of it anywhere.
Things i tried:
pacman -Scc
pacman-optimize
directly installed the pkg from ftp.archlinux.org
also there are no bugs about it and the pkgbuild looks fine to me
I experienced similar things with virtualbox from AUR, but i thought that was AUR related.
Halp plz:|

I found this thread because I was having the same problem. If you haven't figured it out yet, or to make things easier for others who have the same problem, the gtk executable is located at /usr/bin/ghb. I don't know why the developers decided to call the executable "ghb"--it seems like a pretty stupid idea to me. The following command should set you straight:
sudo ln -s /usr/bin/ghb /usr/bin/handbrake

PSE 10 and Adobe CS6: When running silent install help is not working afterwards

Hello,
I'm not sure if this is the correct forum. If not: Please help me find the correct one.
I have a big issue with Adobe CS6 (and former versions like Photoshop Elements 10): When installing it from DVD running GUI everything is working fine afterwards. If I install e.g. Photoshop Elements 10 using "Silent Installation" help is not working afterwards. It states that it cannot locate the URL. I have not installed AIR and also do not plan to install it.
I have 'played' a little around with Common Files\Adobe\helpcfg and help directory. Now at least I do not get an error message but still it's not the online help which opens in the browser but the web page that is defined as 'home'.
The same I see now in Adobe CS6. I have e.g. packaged After Effects and Illustrator and when deploying it I'm not able to open help as well and I fear that this is the same issue.
Has anyone deeper knowledge about how "helpcfg" is working? Any example files? Any other help appreciated as well.
Kind regards
János

@hannilator Have you checked the exceptions folder contents for instructions on how to push to logged off computers? Here's what I get when I package CS6 (DesignWebPrem) and excude AIR/CHC:
After you have deployed the package, separately install the products in the exception folder.
IMPORTANT: Before you install the products in the exception folder, refer to the following Adobe Knowledgebase article for information on installing these products and configuring the settings correctly:
http://www.adobe.com/go/aamee_exceptions
NOTE: The installation commands provided below will work when the user is logged in to the client machine where the package is being deployed. For the scenario where the user is not logged in, prefix the following string to the command:
sudo launchctl bsexec `ps auwwx |grep [l]oginwindow | awk '{ print $2 }'`
As an example, here is the command to install "Adobe AIR" when the user is not logged in to the client machine (assuming Adobe AIR is part of the package):
sudo launchctl bsexec `ps auwwx |grep [l]oginwindow | awk '{ print $2 }'` Adobe\ AIR\ Installer.app/Contents/MacOS/Adobe\ AIR\ Installer -silent
###################################### Command to install Adobe Dreamweaver Widget Browser ######################################
Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer -silent -eulaAccepted -programMenu WidgetBrowser.air
###################################### Command to install AdobeHelp ######################################
InstallAdobeHelp appVersion=4.0.244 appId=chc pubId=4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 installerArg1=-silent installerArg2=-eulaAccepted installerArg3=AdobeHelp.air

IPhone bluetooth lowering volume and fans even when not getting a call

Have a friend where when he gets into his car, his phone is even turning the radio volume down and lowering the fan speed even when he doesn't get a call, so he has to keep turning bluetooth or his phone off so it won't mess with that stuff. Before it would only do that when he would receive a call. Any idea what might be doing it?

What indications does your friend have that his phone is causing that?
It's possible - maybe an alert/notification that is coming through is causing it. The sound is trying to play through the bluetooth instead of the handset. Tell him to mute his phone.

Superseding Application Installed when NOT deployed and NOT set to Automatically Upgrade

SCCM 2012 SP1
I have an application of Adobe Reader X which is deployed as "available" to the "All Workstations" collection. (It is also installed as part of our OSD task sequence for all workstations, if that matters.)
Some months ago I packaged Adobe Reader XI and did NOT set it to supersede Adobe Reader X. It was deployed as available to a small user collection.
Flash forward to yesterday. I wanted Reader XI to be available to all IS staff, but not to automatically install for any of them or to automatically replace existing Reader X installs for anyone. I went into my existing Adobe Reader XI application
and set it to supersede the Adobe Reader X deployment type. I then deployed Adobe Reader XI as "Available" to my "IS Staff" user collection and did NOT select the "Automatically upgrade any superseded versions of this application."
Overnight, all existing installs of Adobe Reader X were replaced by Adobe Reader XI on all workstations that were powered on during the maintenance window. I was understandably surprised and double-checked my deployment settings. It *is* deployed
as "available" to all IS staff and to the pre-existing user collection. and verified that I do not have Adobe Reader XI deployed to ANY other collections other than the original small user collection and now to my IS Staff collection, both
as "Available".
I checked APPINTENTEVAL.log on some of the affected workstations and noted that once I had created the supersedence relationship, all workstations that I've checked started logging as "Applicability = Applicable" and as soon as the maintenance window
started, they installed.
I'm very confused. I've used Application Supersedence many times, and it has never applied to a collection to which the superseding application was not deployed. Can anyone suggest a mechanism I might have missed that made this app evaluate as
applicable on every workstation that had Reader X deployed to it? I'm confident that it should have have.

Is Reader XI used in a (OSD) task sequence?
Torsten Meringer | http://www.mssccmfaq.de

I deleted a device on bluetooth list, and now blurtooth do not search any device when I active it.

I found some device in bluetooth but I deleted a device for error. Now, when I active blurtooth it do not seach any. How can I solve it?. Thanks.

You must put the device you want to connect into Pairing mode. You will need to check the instructions for the device.

Bluetooth module and cable install when not factory installed

Similar Messages

Maybe you are looking for