BMC - Auto Notification not working for specific Client

Hello Experts,
We have PATROL® for SAP Solutions Trak 5.0.50 installed and configured for our SAP ECC EhP4 system and trying to generate mails for aborted jobs.
The configuration in place:
- Collectors are running fine.
- Configurations for auto-alert are in place:
  - opti_script is defined in /sapmnt/ Aborted Jobs. Here the Priority value is 551 much higher than the required 400.
Now I have deliberately aborted a job and a alert was also generated. But the problem is the mail is not getting fired.
And the same settings work perfectly on the client 000 of the same SAP system.
Kindly suggest any pointer which could help fixing the issue. I checked over and over again and compared client 000 settings to client 100 settings. All are same. But the mail does not get fired from client 100.
Thanks a ton in advance,
Srikishan

The issue was resolved.
For reference, the Patrol parameter 'consecutive alerts' is of relevance here. Only after a specified number of defined consecutive alerts is the notifciation mail triggered. Set it to 1 or more.
Regards,
Srikishan

Similar Messages

  • Cut and Paste not working for specific client?

    Gui Gurus,
    I have recently upgraded some users to Gui 710 Patch 8.  However on one users install, she cannot copy and paste the entire content of a cell.  For example:
    If she copies aaaabbbbbccccdddd, she'll only get aaaabbbbbcccc.  For some reason it gets truncated.
    I have tried this on my identical install and can do the exact same cut and paste for the same input field fine.  I did a reinstall of her Gui, but that did not help.  I checked her user parameters and could not find anything to alter this behavior.  I tried "Quick Cut and Paste" also, and that yielded the same incorrect results.  I did not see anything else in the Options / I18N that would alter this?
    Any ideas where to look?
    Thanks,
    Jeff Martens
    Basis Admin.

    Martin,
    Thanks for the reply.  I did try the cut & paste option in the expert tab and that did not work.
    I am copying from a normal user input field to another input field.  This is not static text that you would have to CTRL+Y to copy.
    Thanks,
    Jeff

  • Voicemail notifications not working for iphone 4s

    voicemail notifications not working for iphone 4s

    I had the same problem and after a lot of research here and on Verizon I finally discovered that it was an app named Onavo Extend that was preventing my voicemail from working. Other people have had success resetting their phone or network settings, disabling and reenabling SIRI, or deleting the Neilsen app (which I didn't have)  but those options didn't work for me. A lot of mods have claimed that this is not an Apple problem but if it is caused by an app that Apple allows to be sold in their app store, then it is an Apple problem, not a carrier problem. Of course, sometimes its just an ID 10 T problem.

  • Auto resolve not working for cached outlook

    We recently migrated from Exchange 2007 to 2010. One thing we have noticed is that auto resolve (to alias name) is not working for Outlook in cached mode.  Not in cached mode or via owa, it seems to work fine.

    Hi,
    Does the issue happen to all users or some specific users?
    Please check whether the issue happens in Outlook Online mode. If the issue only happens in Cached mode but not in Outlook Online mode, please create a new Outlook profile to have a try.
    If it doesn't work, please restart Microsoft Exchange File Distribution service in Exchange 2010 and Exchange 2007 then click Send/Receive > Send/Receive groups > Download Address Book to have a try.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Software Update Point Switching is not working for some Clients

    Hi there,
    I found nothing similar here and I hope this is the right section.
    I´m running ConfigMgr 2012 R2 where one of the Site Systems from one of the Primaries is located in an untrusted Forest in a perimeter Network. The Site System there has the MP, SUP and DB Roles. In general it works great. The Systems in that untrusted Forest
    get the SCCM Agent pushed, see and can install published Software packages and receive Windows Updates. But there are a few systems where everything works, except Windows Updates.
    So I had a deeper look at what is happening and found out that the SUP switching is not working for them. They always try to contact the SUP from the Primary, which they cannot reach (this is intended).
    From how I understand SUP switching as described here
    http://blogs.technet.com/b/configmgrteam/archive/2013/03/27/software-update-points-in-cm2012sp1.aspx#pi140062=1
    the Windows Update Agent tries to connect to a SUP every 30 minutes and after 4 failed attempts he will try to connect to the next one until he finds one which works.
    As I said before, this seems to work for most systems in the untrusted forest, but some do not make any intentions to switch the SUP.
    So my next step was to find out from where the Update Agent can get the information of the available SUPs. I think they either don´t receive the information that other SUPs exist, or if the Information is there, they don´t realize that there´s an error and
    make no attempt to switch.
    I used the System Center Support Center to gather all Information from some of the systems with that problems (Log Files, WMI information, registry information, policies etc.) but I cannot find where SCCM or the Update Agent store the information which SUPs
    are available in my environment.
    I´m sure the problem is on the Systems which fail to connect to the right SUP and not in the SCCM infrastructure itself, because for most of the systems everything is working just perfect. Unfortunately in the Blog Post above there´s also no information
    where this information is stored and how it is obtained by the clients. In the comments there´s even one post which describes the same problem I have here, but there was no answer. I hope someone can point me into the right direction, because I´m stuck currently.
    Things I tried additionally to all the log file / WMI / registry sniffing:
    Removing the Software Distribution Folder and restarting the Windows Update Agent
    Removing the WindowsUpdate Registry folder in the HKLM\SOFTWARE\Policies\Windows section in the Registry and restarting the Windows Update Agent.
    Tried to reset the WUAgent with wuauclt /Resetauthorization additionally to the steps above.
    I also tried to manually set the WUServer and WUStatusServer Keys in the registry to the new Server, but as soon as the next Update Scan cycle runs, the value is set back to the URL of the Primary Sites SUP
    Is someone having additional ideas? It seems to me older systems are more affected (which were configured for a standard WSUS before SCCM 2012 was deployed) than newer ones which were installed when SCCM was in place already. But I don´t know what else to
    "reset" on those machines without reinstalling them.

    Thank you very much for your response. I must have missed that one by looking through numerous Logfiles. In this, there´s indeed a list of all available SUPs. So according to the LocationServices.log the machine should have a choice.
    The WMI Key however, contains just one entry and this is the URL of the Primaries SUP which is not reachable in the untrusted forest. Is it OK that the WMI entry includes only one entry? If yes, what process is putting the results from the LocationServices
    into WMI? It seems like the Windows Update Agent is feeded from the WMI Key then. If this is the case my problems seems to be the "communication path" between these two components.
    Is this the job from the SCCM Agent, the Windows Update Agent or maybe some third component I´m not aware of? I wonder how I can fix this.

  • Extended Notification not working for Dialog Task with agent assignment

    Hi Friends,
    I have an issue where I have a user decision step and a sub workflow contains a dialog task with agent assignment.
    Extended notification is configured properly and is working properly for user decision step but its not working for the dialog task created as an activity.
    Batch jobs are configured to run report SWN_SELSEN.
    I was checking SDN and found this discussion handy :
    http://help.sap.com/saphelp_nw73ehp1/helpdata/en/4f/3bed495cc018c8e10000000a42189e/content.htm
    One thing that wonders me is that notifications show up in SOST 4-5 seconds before the user decision step starts execution.
    See screenshot from SOST and WF log.
    SOST log :
    2 questions here: Why is notification not being sent for Dialog task?
                              Why is user decision notification being sent that early even before the User decision task starts execution?
    Please provide your valuable inputs.
    Regards,
    Sandip

    An activity step with agents is supported by the extended notifications if it is a decision task or not, I have used it many times and it works well just no approval/rejection links if it's not a decision task.
    From your screenshot you can see that a mail has been created and is found in SOST, usually this cases are problems with the mail server or connection to it, check the mail settings in the SMTP node in transaction SCOT, also check with mail server team if there is a block to/from the SAP server.

  • Samsung Charge:  ringtone notification not working for email

    I have had my Charge for about a month, and really like it.  However, I cannot get a ringtone notification to work for email.  I've followed the steps in guide- what suggestions do you have?  Thanks.

    We can help you resolve your ringtone concerns. We do need some more details about your issue. What difficulty are you having in assigning the ringtone? Does it give you an error when you try to pick the ringtone, or does it allow you to assign it but when the phone rings doesn't work? 
    What have you tried? Have you pulled out the battery? Have you tried another ringtone? Are these stock ringtones or are they downloaded? 
    Please reply with some more details, and I'm sure we'll get you on a path to resolution. 

  • "Resend" option is not working for specific user. "The Operation Failed" Exchange 2010 Outlook 2013

    Hi Everybody. I have a weird one for you.
    I have a user that gets an "operation failed" message whenever trying to use the "resend" option on any email (It's the one right under recall). I had tested up and down on her machine. Exchange 2010 Outlook 2013
    Ran in safe mode, recreated her profile, disabled virus scanning, repaired office. (weird, the font just changed sizes on me)
    After all of this I tested on other computers, other users seem to be able to "resend" just fine. However her account does not work on any computer I try, internal or external to the network.
    It looks more like a profile issue.
    She's a very active archivist, so she only has 486MB of space used by her mailbox.
    It's well under quota.
    It's been really puzzling me.
    MCSE 2003, Exchange. MCTS Vista, 7. Administrator of awful, neglected website http://timssims.net

    Hi Timssims,
    Since there is only one user in the org has this issue, it seems an issue on the Outlook client side.
    I suggest asking Outlook Forum for help so that we can get more professional suggestions.
    For your convenience:
    https://social.technet.microsoft.com/Forums/office/en-US/home?forum=outlook
    However I also have some suggestions for your reference:
    1. If this issue occur on Cached Mode, I suggest turning to Online Mode for testing.
    2. Please also paste the detailed error message if "operation failed" is not the
    complete information.
    3. If still not works after perform operations above (including suggestions from Outlook Forum), I suggest re-creating a new mailbox for the specific user just as Martin suggested.
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • Iphone 4 push notifications not working for any app

    hi, Actually I own an iPhone 4 os 4.2.1(8c148). The thing is that push notification for all the apps that support this feature is not working, I've been an iphone user for long time now, so I konw all the stuff about turning on the push notifications etc. the problem is that my phone give me the pushes like 1 hr or 2 late, or some times never , i just have to open the apps to see my new messages and stuff. Since i live in colombia I have brought the iphone to the store and they take it for like a week and then they give me the phone back saying that is ok , but it isn't. I' have reinstalled the software, I've done anything you can think of, like turning on an of push notification, put it in plane mode, restore as new, backups, and I don't know what else to do, and the thing is that in colombia they don't exchange your phone that easy as it is in the US. So please any advise? ANd I'm sorry about my English. Thank you!

    Unfortunately you have already done everything we can possibly instruct you to do.. at this point the only option is getting them to exchange it its under warranty its not working you have to get a exchange

  • SAP PLM 7.02- Web UI search not working for Specification

    Hello PLM members,
    I am facing issue with indexing of Specification connectors due to that the specification quick search is not working properly.
    I am looking the steps to activate the EHS: Specification connector in the ESH_cockpit.
    What is the prerequisite before activation of the Specification connector in the cockpit.
    After selecting the EHS: Specification, do i need to activate all the related connector inside the specification.
    What is Virtual template  for  EHS: specification in the cockpit.
    Need detail about the scheduling a real time indexing.
    Thanks
    Shailesh

    Dear Shailesh,
    You can find the necessary information in the Specification customizing:
    When you create a connector the cockpit will automatically creates all the necessary dependent connectors. When all of the connectors have the status Prepared, you can start the indexing.
    The PLM Web UI uses the virtual template for the Advanced Search and all the other enterprise search. This model is only a application relevant representation of the EHS data. You can find additional information about this here: Creating Virtual Templates - Search Technology - SAP Library
    Hope it could help.
    Kind Regards,
    Gergő

  • Bridge does not work for wireless clients - connecting to existing network.

    Hi - I really hope somebody can help out here, after hours of trial & error, I have finally given up
    I need to connect my Airport Extreme Base Station to my existing network. I have a linksys router (192.168.15.1) connected to my modem and this linksys router acts as DHCP server too.
    I suppose I have to use "bridge mode" for that to work. But should the linksys be connected to the AEBS using the AEBS's WAN or LAN port?
    If I use "bridge mode", then wired computers to the AEBS works fine - getting an IP from the linksys etc. BUT, the wireless clients will have a self-assigned IP and not get through to the internet. It's like the AEBS will not allow wireless clients to "get through" unless AEBS itself is handing out IP addresses.
    Page 36 of this manual ( http://manuals.info.apple.com/en/DesigningAirPort_Networks10.5-Windows.pdf ) shows the setup I want. But in the picture, it says "Ethernet WAN port" but the text says: "The Apple wireless device (in this example, a Time Capsule) uses your Ethernet network to communicate with the Internet through the Ethernet LAN port ( <--> )." I don't know which one to use, WAN or LAN - they show WAN but say LAN?
    When I set it up as "share an IP address", the AEBS status tells me "double nat" and to change from "shared IP" to "bridge mode". I do that, and everything seems fine - for the wired clients. Now the wireless clients cannot connect, Airport on the MacBook Pro just say "Connection failed" and the MacBook says "Invalid password" (translated from danish), even though I set the Airport Utlity to save the password in keyring, so it should be correct... If I disable wireless encryption, the wireless clients will connect but get a self-assigned IP, and therefor not work (cannot get online)...
    It seems the only way I can get wireless to work, is if I set AEBS up as DHCP, but then it won't be on the "same network" as the linksys (192.168.15.1), but rather on 10.0.x.x as I select. If I select 192.168.x.x within AEBS, I'm also getting some error messages, conflict/subnet thing.
    Anyway - I really hope somebody knows how to get wireless clients to get an IP address from existing ethernet when connected to the AEBS.
    Thanks!!

    I've given up and had to go back to running "Double NAT" which also reports as a "problem" within the AEBS, but I just "ignore" it so the light will always be green.
    It still ***** though, as "Double NAT" is also a reason for "Back to my Mac" not working properly, but how the ** am I supposed to avoid Double NAT when the wireless will not work in bridged mode?!

  • 3.4: keyword auto-completion not working for multiple levels

    Auto-completion does not work with higher level keywords, which used to work in LR 3.3 (IIRC).
    Example:
    I enter in the "Click here to add keywords" field:
    "He" then LR tries to complete the keyword by showing keywords starting with "He". Fine.
    But this is a keyword which does not exist so far, so I enter "Heldenplatz > W" because I want to have sorted it under Wien. If I'm not mistaken, LR 3.3 showed after entering the "W" a list of existing keywords starting with W (auto-completion for the one level higher tag). This is not the case anymore. I have to enter  "Heldenplatz > Wien" completely, which makes it slow and error-prone.
    Am I mistaken or can you reproduce it?
    Cheers

    GaryRowe wrote:
    How can it be, after all this time, that they still do not have effective regression testing in place ? Any sane development team (who wants to remain sane ;-) builds this as a priority ... unless they aren't given the resources?
    I think (don't remember though) that this never worked, so regression testing would not have helped.
    What is really to worry, that features aren't consequently and completely implemented (and tested). With a new option in Lightroom 3, Adobe has offered support for keywords with spaces. It seems that this feature as neither been thoroughly analysed or implemented. Thus, we face the currently inconsequent support of it:
    keyword completion only works with the first entered word, but when you enter a complete keyword hierarchy using the ">" letters
    filtering seems to have problems too

  • Keyword search on collection set not working for specific sub-collections

    I am having the following problem:
    When I do a search (Text->Keyword->Contains All-> for a keyword (in my
    case "Fave"), it does not work if I select the collection set that contains the
    collection that contains the images with that keyword.
    It DOES work if I select the folder, parent folder, or just the
    collection that contains the image. Just not the collection set.
    The details of how this came about are below - and are probably a
    little unusual, but not outside the realm of what should be allowed.
    Is there a way to reset/reindex keywords in a collection?
    Specifically:
    images lives in collection C1 which is part of collection set
    CS1. It lives in F1 (on disk and in LR) which is in parent folder
    PF1. A keyword search works when I select F1 or PF1 or C1, but NOT
    when I select CS1
    This happens on a set of folders that went through the following
    (totally allowable?) sequence:
    I am running on a Windows 7 64 bit machine with 64 bit LR3.3
    I have an internal disk where I keep my catalog and images. Windows
    mounts this as P:. I also mount it on my Desktop as the folder
    "Lightroom" (this allows me to change to a larger external disk
    by mounting it in the same place without changing the locations of
    all the files).
    I mistakenly imported pics into P:/PF1 rather than
    C:/.../Desktop/Lightroom/PF1 as I normally do.
    Added keywords made a collection C1 put the images in it, and added
    C1 to collection set CS1
    Having realized my import mistake (P: rather than
    C:/.../Desktop/Lightroom), I went in the Folders->P: section and did
    an Update Folder Location on F1 to C:/.../Desktop/Lightroom/F1
    This seemed to be all fine, but this weird Keyword search problem
    resulted.
    I have tried the following things:
    o Deleting and re-adding Keywords in the Collection
    o Deleting and re-adding the Keywords in the Folder
    o Renaming and relocating the Folder
    o Create new collection C2 and move pics from F1 into C2

    See my simplified recipe for reproducing this bug (which turns out not to be related to the drive mounting I described):
    http://forums.adobe.com/thread/764538

  • IOS 5 Notifications Not Working for Some Third Party Apps

    Recently updated my iPhone 4 to iOS5. Notification center worked perfectly for a week, but then I noticed that certain apps (Beluga) would not show up in the notification center despite receiving new messages. The home page didnt update with a badge either. It seems as if push notifications for some third party apps are not working correctly.
    I have already attempted all of these to correct the problem to no avail:
    1. Confirming notification settings for each application
    2. Turning notifications off and then on
    3. Removing and reinstalling app
    4. Restarting the iPhone
    5. Shutting down and powering up the iPhone
    6. Restoring the iPhone

    Having the same problem...  Ipad 2 running iOS 5 working fine.  My iPhone 4s gets the occasional Facebook notification but not much else.  Got home today and had about 5 notifications on the iPad that never came through to the iPhone.  Tried everything you tried and nothing....

  • Notifications not working for iCal or Reminders

    I just installed Mountain Lion and have the following checked in Notification Center for both Calender and Reminders, but no alerts/banners ever show:
    -Show in Notification Center (5 Recent Items)
    -Badge app icon
    -Play sound when receiving notifications
    When I create a reminder in Reminders or in iCal, it shows up in the Notification Center saying "in 1m" or whenever it's due, but no Alert or Banner ever pops up and I don't hear any sounds either (and my sound is on and turned up).  Am I missing something?  Both apps are "open" (they have the little light below them in the dock).
    A follow up question: do notifications work for iCal or Reminders (or any app) if the app is closed, minimized, or hidden (Command + H)?
    Thanks for your time.

    You cannot sync calendars or contacts with iCloud using Snow Leopard: iCal is trying to connect to the MobileMe server which is closed, and you need to remove it from Preferences>Accounts.
    You may be able to sync your calendars to iCloud by means of an unsupported hack, and there is a convoluted hack which has been reported as working for Address Book (and as not working by others - I've not tried it), but iCloud's other facilities will not work. This page outlines the situation with Snow Leopard and iCloud, including a link to the calendar hack:
    http://www.wilmut.webspace.virginmedia.com/notes/icloudSL.html
    There are a couple of third-party solutions which may be of interest.
    BusyCal is an iCal-like calendar application with extra facilities: it can sync with the iCloud Calendar while running on Leopard, Snow Leopard or Lion. A single user licence (two machines allowed) is $49.99.
    Soho Organizer can sync Calendars and Contacts with iCloud on Leopard, Snow Leopard and Lion. A single user licence (multiple machines allowed) is $99.99.
    (I have no connection with either firm.)

Maybe you are looking for