BOM explosion while creation of scheduling agreement / PO

Hi all,
Can anyone pls tell me how can i control / make settings for the explosion of BOM, when MM creates a scheduling agreement or a PO ?
Also, if i have multiple alternative BOMs, how can i get the BOMs selected automatically??
Thank you,
Shrenik

Dear,
Just a BOM is saficient for your senario.
What other requirement are
1. material master with special procurement key in MRP2
2. A valid BOM. i.e. as of the date it should be active, i.e it should be valid for the given date(as per the release date)
3. Material is maintained in that plant.
4. IMG settings - in OS30...PP01 or BEST should have id 01 and the alternative determination in related application area-alternative determination for MRP--> for a plant it should be 01.( where the BOM usage 1 is maintained), check your BOM usage, it may be 3 or 1, both are okay.
All other settins like inforecord etc will help you to reduce your input data, but above settings will help to explode the BOM in PO.
Hope you understood.

Similar Messages

  • Generate Source List while creating Contract/Scheduling Agreement

    Hi,
    My requirement is that the Source List for the particular Material / Vendor should be created automatically when I am creating a new Contract / Scheduling Agreement.
    How can this be acheived.
    Thanks in Advance,
    Manju.

    Create an LSMW so that while loading contract itself you can also load source list.
    Regards
    Mohan

  • BOM explosion while MRP run

    hi all
    I have a FERT for which raw materials are assigned in the BOM. but while running MRP, the BOM is not being exploded and the list doesnt show the raw materials.
    I have checked in the Overall maintenance of the plant parameters in MRP in SPRO and the required paramenters are maintained.The scenario is MTS - strategy 10.but still the BOM is not exploded.
    Could anyone solve my query
    Thank you in advance
    chandra

    Hi Chandra,
    Could you please check if there was an exception message "50 or 52"? If so then it can be beacuse for the BOM explosion date system is not able to get a BOM.
    If there were no exception messages then check in MRP4 view of the FERT material for dependent requirement defination. This should be blank.
    Hope this helps..
    Regards,
    Prasobh
    Reward your points if this was helpful.

  • Error while GR against scheduling agreement

    Hello,
    I am doing the GR against the scheduling agreement, but system doesn't allow me to do GR. I get the error message as 'Transaction cannot be posted due to errors in price determination' error ME573.
    What can be the cause of this error?
    Thanks,
    Input

    Input_Output wrote:
    Hello,
    >
    > I am doing the GR against the scheduling agreement, but system doesn't allow me to do GR. I get the error message as 'Transaction cannot be posted due to errors in price determination' error ME573.
    >
    > What can be the cause of this error?
    >
    > Thanks,
    > Input
    Hi,
    Check the pricing procedure you have used if it is properly assigned to the vendor thru schema group and to the purch organization. Perhaps assignments are missing.
    Shiva

  • Info record creation from schedule agree, with all conditions

    HI
    We wish to create Inforrecord from schedule agreements, When we used Info update indicator B its creating Info record but not copying conditions from schele agreement only order history is updated
    Is there any way we can copy all conditions from schedule agreement to info record?
    Thanks

    I realized, standard SAP behaviour is
    Info record does not exist
    Quotation
    Time-dependent conditions and their supplementary conditions are adopted
      Scheduling agreement
    Is set as last document; order price history is updated
      Contract
    Time-dependent conditions and their supplementary conditions are adopted
      Purchase order
    Is set as last document; order price history is updated
    IS THERE ANY OTHER WAY TO ACIEVE CPYING OF ALL CONDITIONS FROM SCHEDULE AGREEMENT TO INFORECORD
    Edited by: Sasi nagireddy on Jan 12, 2011 5:37 AM

  • Error while I maintian Schedule agreement

    Hi ,
    As i amintian the Schedule agreement material in   Me38 , i have defined the dates and quantity and the st del date , and then i try to save the same it give the following error.
    *"SCOURDE NOT INCLUDED IN LIST DESPITE SOURCE LIST REQUIRMENT"
    Kindly let me know what is the likely error and how it could be resolved.
    regards
    Kim Roger.

    Hi,
    check in MM01 in Purchasing View Below tab
    Uncheck the Source list.
    also check in IMG
    Materials Management > Source list> Source Req. at Plant level
    Uncheck the box for your plant.
    or else
    mainain a proper source of supply

  • BOM explosion while creating sales order

    hi
    i created a fert ,verp and halb in the palnt XX
    created a BOM for fert with level 5 for halb and VERP as stock item
    for fert in MM01 item category is ERLA and extended with sales org
    while raising sales order for fert am getting error as
    HALB and VERP is not copied for BOM
    pls help me

    resolved
    created a sales view for the HALB and ROH
    Edited by: geepee on Jan 27, 2010 10:51 AM

  • Scheduling agreement inbound idoc error.

    Hi Experts,
    I am creating an Scheduling Agreement with DELFOR02 inbound idoc, while creation the Scheduling Agreement system is giving error regarding Scheduling Agreement not found. In fact I have create the Scheduling agreement by T-code VA31. And I check the table VLPKM, there are relevant record stored.
    Then I maintain the view V_T663A to not check everything when inbound idoc recevie. and tried agan in t-code BD87. the system give me another message Make an entry in all required fields.
    How can I handle these error messages?
    Thanks..
    Regards....

    Does any one has ideas for that?
    Thanks.

  • I- doc for creation/updation of Sales Scheduling Agreement

    Hi,
    Could anybody tell me details regarding the idoc details, for Sales Scheduling Agreement Creation & its updation.
    Need the - Process code, Message type , Basic type & other details
    Will the Idoc type be of DELORD. We will be getting the flatI file from the client for the creation of Scheduling Agreements
    Appreciate the help
    Thanks

    For Automotive Suppliers, and SD scheduling agreement types 'LZ', etc. 
    Normally, the users create the SD Scheduling Agreement using VA31 first.
    Then the Idocs, which are processed through IDOC_INPUT_DELINS_START, simply update the SA.
    One SA may continue to be updated by EDI releases for many months.   
    On an 'LZ' type SA, there is a tab for Forecast Delivery schedules and a tab for JIT Delivery schedules.
    At the simple level, which tab gets updated is controlled by the value in E1EDP10-SCREL.
    For inbound 830 / DELFOR / VDA4905 transmissions, usually map SCREL = '03' which updates the Forecast Delivery Schedule.
    For inbound 862 / DELJIT / VDA4915 transmissions, usually map SCREL = '02', which updates the JIT Delivery Schedule.
    The search criteria in the search box you see on VA32 are similar to the key Idoc fields which are used to find the SA which needs to be updated.
    Hopefully the users have access to transaction EMFOR to monitor the inbound Idocs and reprocess if necessary. (This is easier than workflow or WE02/BD87)
    From EMFOR, Idocs in status 51 can often be processed in foreground. This is the quick way to figure out why you are getting a status 51. But I suspect it's because the SA was not created first.

  • Subcontracting in scheduling agreement

    Dear all,
    while doing subcontracting scheduling agreement, how can we add the child components to the parent material.
    in cs01 ,we maintained the bill of material for the parent material.in CS11 we are able to view it.
    Regards,
    velu

    Hi,
    If you have already maintained the BOM in CS01, you need  not have to maintain the seperate BOM in Scheduling Agreement, because, the already existing BOM will get copied. The only thing you will have to do is that, define special procurement category as 30 (Sub-Contracting) in MRP2 view of the material master & then create the SchedulingAgreement with item category as L (Sub-Contracting).
    Hope this clears.
    Regards,
    Prashant
    - Pl. reward points if the answer is helpful to you

  • Wrong data in MCE1 & MCE3 reports for scheduling agreements

    Hi All,
    I have got problem while executing MCE1 & MCE3 reports.It shows wrong PO value and GR Qty. While executing , I am giving inputs as P.Org,Vendor and Period in T.Code MCE1. After executing ,I select Info Structure S011.But the output is not matching with Actual GR quantity and PO Value if you see Purchase Order History.The same case with report MCE3 report,where Info Structure S012 is being selected.
    I have checked in MC26 , where data field for period determination is set as Purchase Order date.
    So Can anybody assist me on this ...How to get the exact data (PO value,Invoice amount,Order qty)which should match with PO history??
    Further to this, Is there any Standard report to get the value of materials bought via consignment??
    Please let me know if there is any customization setting involved??
    Thanks in advance..
    Somu

    1> On what logic is the system picking that calculation schema?
    As per "Define Schema Determination" in spro Purchasing document should pick the Pricing Procedure .
    After creation of scheduling agreement have chacked your values in Scheduling agreement (Purchase ORG ,Schema grp in Vendor)
    2> What settings can I do to make it pick that calculation schema only which has been assigned with POrg Sch Gp and Ve Sch Gp?
    Check in Vendor mater is there any Plant specific Purcahsing data maintained.If it is plant specific Check purchasing data for that Plant.

  • Condition Types in Scheduling Agreement(Urgent)

    Dear Experts.
    This is a query with reference to my earlier issue Changes in Condition ME32L.As per suggestions, to get validity periods i have clicked on Time dependent Condition In SPRO settings Under Define document Types.
    After that i am not able to enter Custom Conditions while creating a Scheduling Agreement.So i tried by removing this Time dependent setting,then was able to enter Custom Conditions...
    But i need to see validity periods too when i change condition types through ME32L...
    So,Please give me appropriate Suggestion....
    Thanks and Regards
    MK

    I'm not sure about your own pric proc, but in standard it should works, and also its apply per organization level.
    RM0000 and RM1000                                                      
        Control the price determination process in POs, quotations, and    
        scheduling agreements.                                             
        Both calculation schemas require 2 condition types for the gross   
        price: one for automatic price determination (standard: PB00) and  
        one for manual maintenance (standard: PBXX).                                                                               
    RM0001 and RM1001                                                      
        Determine which condition types you can enter in purchasing document
        headers with time-dependent conditions (e.g. contracts).

  • Infoupdate in scheduling agreement

    Dear Experts,
    While creating the scheduling agreement, for some items infoupdate field is showing as B and for some items infoupdate field is showing as C by default. Where can we control this?
    Is it at item level or at Vendor level?
    Please suggest.
    Thanks & regards
    Ramesh

    OMLE -> Purchasing -> Environment Data -> Define default values for buyers.
    In this step, we can change the standard settings of certain fields and functions for each user. Define individual default values and assign them to certain user master records in parameters. Assign default values that you maintained in Customizing to a user by entering the key of the default value in the user master record under the parameter ID "EVO".
    Check this parameter is assigned to the users if you are using the transaction with different user ID.
    Hari krishnan.

  • Item text can't  edit in scheduling agreement.

    Hi ...
    I have one problem in create scheduling agreement.
    When I create standard scheduling agreements , I can edit their item text .
    But if the Item category is K (consignment) , I can't edit item text . The system always show a message -Text changes were transferred.
    Has anyone meet the kind of problem , or that function is restricted by  SAP .
    Hope someone can tell me why or how to solve this problme.
    Thanks a lot.

    Hi,
    i have done ur scenario. It is possible to edit the item text for both item categories : standard and k (consignment). But During creation of scheduling agreement with item category: k , u get the message as " item texts are transferred " and one warning message as " consignment info record does not exist".
    but there is no problem, u can edit the item text for consignment scheduling agreements also. i think there is no settings are required for this.

  • Procedure of scheduling agreement with jit

    Can any one explain the step by step by procedure of creation of scheduling agreement with jit(just in time)
    Vasu,K

    Dear vasu,
    The steps are
    Step 1: Create Creation Profile in IMG under Scheduling agreement node
    Step 2: Assign that creation profile to Material in the material master and the JIT indicator
    Step 3: Ensure that creation profile copied to the SA, if not then assign it in the item detail
    Step 4: Then run the Transaction for the delivery shedule creation
    Ste 5: Check the shedule created
    Thanks,
    With regards,
    Krishna Reddy

Maybe you are looking for

  • "There is no connected camera" error

    After updating to 10.9.2, I can no longer access the camera built in to my Cinema Display and connected to my 2009 Mac Pro. It fails to work in all applications I tried, such as Skype, FaceTime and Photo Booth. Typically, I get an error that says "Th

  • Sorting a variance column in Webi report

    I have the need to sort a report by a variance that I have calculated in the report. For example, a report has inventory for end of prior month and current day. I am calculating the variance between the two columns. (how much inventory has changed by

  • Getting File Name in Automator workflow - combine PDF

    I am using Automator to combine 2 PDF files. I would like to inherit one of the file names in the new PDF and append a standard text to the front of the file name. I am not sure how to do this. I can combine the PDFs the way I would like, but I am no

  • Need help, I am waiting for XML to onLoad to be called before sending return statement

    I have created a function that is going to return an array based on some XML that I am loading. Below is a visual of what I am trying to do. I am basically looking for a way to have my function wait for the xml to be loaded before the return function

  • ItemRenderer DataGridColumn with AS

    Hi all, I need to build DataGrid in ActionScript, where is a column with image. Something like <mx:DataGrid id="DataGrid1" rowCount="8" dataProvider="{mainListCollection}"> <mx:DataGridColumn itemRenderer="mx.controls.Image" headerText="Type" dataFie